CT-PIC-MIB
- Registered at
- 1.3.6.1.4.1.52.4.1.5.9.1
- Namespace
- enterasys
- Source file
CT-PIC-MIB- Digest
sha256:4a729eb1c5331a128d18fb97963ca39675906974fb11669e834841c2af6a8687
Imports
| From | Symbols |
|---|---|
| CTRON-MIB-NAMES | ctPIC |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Gauge32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CT-PIC-MIB CTRON-MIB-NAMES CTRON-OIDS SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| pic OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.1.5.9.1 | |||
| ctPicNumberEntries OBJECT-TYPE Defines the number of PIC modules defined by this MIB. | 1.3.6.1.4.1.52.4.1.5.9.1.1 | Gauge | read-only | mandatory |
| ctPicTable OBJECT-TYPE A table that describes the contents of all PIC modules accessible by this module. | 1.3.6.1.4.1.52.4.1.5.9.1.2 | not-accessible | mandatory | |
| ctPicEntry OBJECT-TYPE Description of a specific instance of a PIC module. | 1.3.6.1.4.1.52.4.1.5.9.1.2.1 | not-accessible | mandatory | |
| ctPicSlot OBJECT-TYPE Specific slot which the module that realizes this PIC resides. If the PIC is associated with the chassis and not a specific module then this value will be 0. | 1.3.6.1.4.1.52.4.1.5.9.1.2.1.1 | INTEGER | read-only | mandatory |
| ctPicIndex OBJECT-TYPE Uniquely identifies the instance of a PIC in a particular slot. | 1.3.6.1.4.1.52.4.1.5.9.1.2.1.2 | INTEGER | read-only | mandatory |
| ctPicLocation OBJECT-TYPE Defines location of the PIC chip. This takes on any of the encoding values defined below for backplane, module, daughter board, brim. | 1.3.6.1.4.1.52.4.1.5.9.1.2.1.3 | OBJECT IDENTIFIER | read-only | mandatory |
| ctPicStatus OBJECT-TYPE Provides the status of the specific PIC chip. the values are defined as follows: other(1) - firmware can not determine status present(2) - PIC seems to be functional notPresent(3) - PIC not found but expected checkSum(4) - A check sum error occured error(5) - An undefined error condition exists. limited(6) - A limited PIC implementation only type code information is present. | 1.3.6.1.4.1.52.4.1.5.9.1.2.1.4 | INTEGER {other(1), present(2), notPresent(3), checkSum(4), error(5), limited(6)} | read-only | mandatory |
| ctPicVersion OBJECT-TYPE Reflects the version of the PIC implementation that this PIC conforms to. This has the format x.yy . If non-existent, this object will be set to all blanks(ascii 32). | 1.3.6.1.4.1.52.4.1.5.9.1.2.1.5 | DisplayString (SIZE(2)) | read-only | mandatory |
| ctPicModuleType OBJECT-TYPE Defines the standard module type value as defined in ctron-oids. | 1.3.6.1.4.1.52.4.1.5.9.1.2.1.6 | OBJECT IDENTIFIER | read-only | mandatory |
| ctPicMfgPN OBJECT-TYPE Describes the manufacturing level part number of the module associated with this PIC. This information is encoded as follows: 7 Characters Part Number 2 Characters Rework Location. If any field of this object is non-existent, it will be set to all blanks(ascii 32). | 1.3.6.1.4.1.52.4.1.5.9.1.2.1.7 | DisplayString (SIZE(9)) | read-only | mandatory |
| ctPicMfgSN OBJECT-TYPE Describes the manufacturing level serial number of the module associated with this PIC. This information is encoded as follows: 3 bytes - Date code (year/week) 4 bytes - Serial number 2 bytes - Manufacture location 3 bytes - Board level revision If any field of this object is non-existent, it will be set to all blanks(ascii 32). | 1.3.6.1.4.1.52.4.1.5.9.1.2.1.8 | DisplayString (SIZE(12)) | read-only | mandatory |
| ctPicMfgPartNumb OBJECT-TYPE This object presents the part number portion of the ctPicMfgPN object. This object contains the same information however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32). | 1.3.6.1.4.1.52.4.1.5.9.1.2.1.9 | DisplayString (SIZE(7)) | read-only | mandatory |
| ctPicMfgSerialNumb OBJECT-TYPE This object presents the serial number portion of the ctPicMfgSN object. This object contains the same information however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32). | 1.3.6.1.4.1.52.4.1.5.9.1.2.1.10 | DisplayString (SIZE(4)) | read-only | mandatory |
| ctPicMfgReworkLocation OBJECT-TYPE The 2 character code that defines the location this module was last reworked. This object contains the same information as presented in ctPicMfgPN object however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32). | 1.3.6.1.4.1.52.4.1.5.9.1.2.1.11 | DisplayString (SIZE(2)) | read-only | mandatory |
| ctPicMfgMfgLocation OBJECT-TYPE The two character code that defines the location this module was manufactured at. This object contains the same information as presented in ctPicMfgSN object however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32). | 1.3.6.1.4.1.52.4.1.5.9.1.2.1.12 | DisplayString (SIZE(2)) | read-only | mandatory |
| ctPicMfgDateCode OBJECT-TYPE The 3 byte date code field when this module was last reworked. This is in year/week format. This object contains the same information as presented in ctPicMfgSN object however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32). | 1.3.6.1.4.1.52.4.1.5.9.1.2.1.13 | DisplayString (SIZE(3)) | read-only | mandatory |
| ctPicMfgRevisionCode OBJECT-TYPE The 3 character board level revision code field of this module. This object contains the same information as presented in ctPicMfgSN object however in a more human readable format. If non-existent, this object will be set to all blanks (ascii 32). | 1.3.6.1.4.1.52.4.1.5.9.1.2.1.14 | DisplayString (SIZE(3)) | read-only | mandatory |
| ctPicTLPN OBJECT-TYPE Describes the top level part number of the module associated with this PIC. This information is encoded as follows: 7 Characters Part Number 2 Characters Rework Location. If any field of this object is non-existent, it will be set to all blanks(ascii 32). | 1.3.6.1.4.1.52.4.1.5.9.1.2.1.15 | DisplayString (SIZE(9)) | read-only | mandatory |
| ctPicTLSN OBJECT-TYPE Describes the top level serial number of the module associated with this PIC. This information is encoded as follows: 3 bytes - Date code (year/week) 4 bytes - Serial number 2 bytes - Manufacture location 3 bytes - Top level revision If any field of this object is non-existent, it will be set to all blanks(ascii 32). | 1.3.6.1.4.1.52.4.1.5.9.1.2.1.16 | DisplayString (SIZE(12)) | read-only | mandatory |
| ctPicTLPartNumb OBJECT-TYPE This object presents the part number portion of the ctPicTLPN object. This object contains the same information however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32). | 1.3.6.1.4.1.52.4.1.5.9.1.2.1.17 | DisplayString (SIZE(7)) | read-only | mandatory |
| ctPicTLSerialNumb OBJECT-TYPE This object presents the serial number portion of the ctPicTLSN object. This object contains the same information however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32). | 1.3.6.1.4.1.52.4.1.5.9.1.2.1.18 | DisplayString (SIZE(4)) | read-only | mandatory |
| ctPicTLReworkLocation OBJECT-TYPE The 2 character code that defines the location this module was last reworked. This object contains the same information as presented in ctPicTLPN object however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32). | 1.3.6.1.4.1.52.4.1.5.9.1.2.1.19 | DisplayString (SIZE(2)) | read-only | mandatory |
| ctPicTLMfgLocation OBJECT-TYPE The two character code that defines the location this module was manufactured at. This object contains the same information as presented in ctPicTLSN object however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32). | 1.3.6.1.4.1.52.4.1.5.9.1.2.1.20 | DisplayString (SIZE(2)) | read-only | mandatory |
| ctPicTLDateCode OBJECT-TYPE The 3 byte date code field when this module was last reworked. This is in year/week format. This object contains the same information as presented in ctPicTLSN object however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32). | 1.3.6.1.4.1.52.4.1.5.9.1.2.1.21 | DisplayString (SIZE(3)) | read-only | mandatory |
| ctPicTLRevisionCode OBJECT-TYPE The 3 character top level revision code field of this module. This object contains the same information as presented in ctPicTLSN object however in a more human readable format. If non-existent, this object will be set to all blanks (ascii 32). | 1.3.6.1.4.1.52.4.1.5.9.1.2.1.22 | DisplayString (SIZE(3)) | read-only | mandatory |
| ctPicPcbRevision OBJECT-TYPE Defines the Cabletron revision of the art work for this module. If non-existent, this object will be set to all blanks(ascii 32). | 1.3.6.1.4.1.52.4.1.5.9.1.2.1.23 | DisplayString (SIZE(8)) | read-only | mandatory |
| ctPicMacAddr OBJECT-TYPE The base MAC address(ethernet format)assigned to the module. If this field is not used then it should have a value of a zero length string. If non-existent, this object will be set to all blanks(ascii 32). | 1.3.6.1.4.1.52.4.1.5.9.1.2.1.24 | OCTET STRING (SIZE(0..6)) | read-only | mandatory |
| ctPicNumbRsvdAddrs OBJECT-TYPE The number of reserved MAC addresses starting at the address as defined in ctPicMacAddr. If no MAC addresses are reserved this object should have a value of 0. | 1.3.6.1.4.1.52.4.1.5.9.1.2.1.25 | INTEGER | read-only | mandatory |
| ctPicBoardRevision OBJECT-TYPE Defines the Cabletron board level revision level code for this module. If non-existent, this object will be set to blanks (ascii 32). | 1.3.6.1.4.1.52.4.1.5.9.1.2.1.26 | DisplayString (SIZE(3)) | read-only | mandatory |
| ctPicModuleTypeString OBJECT-TYPE Describes the module associated with this PIC in a human readable format. If non-existent, this object will be set to blanks (ascii 32). | 1.3.6.1.4.1.52.4.1.5.9.1.2.1.27 | DisplayString (SIZE(16)) | read-only | mandatory |
| ctPicDCDCconverterType OBJECT-TYPE Describes the voltage of the installed DCDC Converter input and output lines. If the Module does not contain a DCDC Converter this object will be set to blanks (ascii 32). | 1.3.6.1.4.1.52.4.1.5.9.1.2.1.28 | DisplayString (SIZE(12)) | read-only | mandatory |
| ctPicDCDCconvInputPower OBJECT-TYPE Describes the maximum allowed input power for the DCDC input line. If the Module does not contain a DCDC Converter this object will be set to blanks (ascii 32). | 1.3.6.1.4.1.52.4.1.5.9.1.2.1.29 | DisplayString (SIZE(3)) | read-only | mandatory |
| ctPicSMB1promVersion OBJECT-TYPE Describes the current version of the SMB1 prom. If the Module does not contain an SMB1 prom this object will be set to blanks (ascii 32). | 1.3.6.1.4.1.52.4.1.5.9.1.2.1.30 | DisplayString (SIZE(8)) | read-only | mandatory |
| ctPicAtmMacAddr OBJECT-TYPE The Atm MAC address(atm format)assigned to the chassis. If this field is not used then it should have a value of a zero length string. If non-existent, this object will be set to all blanks(ascii 32). | 1.3.6.1.4.1.52.4.1.5.9.1.2.1.31 | OCTET STRING (SIZE(0..20)) | read-write | mandatory |
| ctPicOEMVendorId OBJECT-TYPE Represents the OEM vendor for a product. If the Module does not program this value this object will be set to blanks (ascii 32). | 1.3.6.1.4.1.52.4.1.5.9.1.2.1.32 | INTEGER {cabletron(1), nEC(2), dEC(3), cPQ(4), newbridge(5), enTeraSys(6)} | read-only | mandatory |
| ctPicOEMVendorName OBJECT-TYPE ASCII name of the OEM vendor for the product. If the Module does not program this value this object will be set to blanks (ascii 32). | 1.3.6.1.4.1.52.4.1.5.9.1.2.1.33 | DisplayString (SIZE(40)) | read-only | mandatory |
| ctPicMfg97SN OBJECT-TYPE Describes the manufacturing level serial number of the module associated with this PIC. This information is encoded as follows: 4 bytes - Date code (year/week) 4 bytes - Serial number 2 bytes - Manufacture location 2 bytes - Board level revision If any field of this object is non-existent, it will be set to all blanks(ascii 32). | 1.3.6.1.4.1.52.4.1.5.9.1.2.1.34 | DisplayString (SIZE(12)) | read-only | mandatory |
| ctPicMfg97DateCode OBJECT-TYPE The 4 byte date code field when this module was last reworked. This is in year/week format. This object contains the same information as presented in ctPicMfg97SN object however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32). | 1.3.6.1.4.1.52.4.1.5.9.1.2.1.35 | DisplayString (SIZE(4)) | read-only | mandatory |
| ctPicMfg97RevisionCode OBJECT-TYPE The 2 character board level revision code field of this module. This object contains the same information as presented in ctPicMfg97SN object however in a more human readable format. If non-existent, this object will be set to all blanks (ascii 32). | 1.3.6.1.4.1.52.4.1.5.9.1.2.1.36 | DisplayString (SIZE(2)) | read-only | mandatory |
| ctPicTL97SN OBJECT-TYPE Describes the top level serial number of the module associated with this PIC. This information is encoded as follows: 4 bytes - Date code (year/week) 4 bytes - Serial number 2 bytes - Manufacture location 2 bytes - Top level revision If any field of this object is non-existent, it will be set to all blanks(ascii 32). | 1.3.6.1.4.1.52.4.1.5.9.1.2.1.37 | DisplayString (SIZE(12)) | read-only | mandatory |
| ctPicTL97DateCode OBJECT-TYPE The 4 byte date code field when this module was last reworked. This is in year/week format. This object contains the same information as presented in ctPicTL97SN object however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32). | 1.3.6.1.4.1.52.4.1.5.9.1.2.1.38 | DisplayString (SIZE(4)) | read-only | mandatory |
| ctPicTL97RevisionCode OBJECT-TYPE The 2 character top level revision code field of this module. This object contains the same information as presented in ctPicTL97SN object however in a more human readable format. If non-existent, this object will be set to all blanks (ascii 32). | 1.3.6.1.4.1.52.4.1.5.9.1.2.1.39 | DisplayString (SIZE(2)) | read-only | mandatory |
| ctPicOEMTLSN OBJECT-TYPE Describes the top level serial number of the module as specified by the OEM for this device. If non-existent, this object will be set to all blanks (ascii 32). | 1.3.6.1.4.1.52.4.1.5.9.1.2.1.40 | DisplayString (SIZE(20)) | read-only | mandatory |
| ctPicECOTable OBJECT-TYPE Each module that contains a PIC may have several ECOs performed on it. The ctPicECOTable reflects a history of the last 5 ECOs that have been performed on this module. | 1.3.6.1.4.1.52.4.1.5.9.1.3 | not-accessible | mandatory | |
| ctPicECOEntry OBJECT-TYPE Describes a particular PIC ECO entry. | 1.3.6.1.4.1.52.4.1.5.9.1.3.1 | not-accessible | mandatory | |
| ctPicECOSlot OBJECT-TYPE Specific slot which the module that realizes this PIC resides. If the PIC is associated with the chassis and not a specific module then this value will be 0. This refers to the same slot as identified by ctPicSlot in ctPicTable. | 1.3.6.1.4.1.52.4.1.5.9.1.3.1.1 | INTEGER | read-only | mandatory |
| ctPicECOIndex OBJECT-TYPE The specific PIC instance that this ECO entry pertains to. This refers to the same instance as identified by ctPicIndex in ctPicTable. | 1.3.6.1.4.1.52.4.1.5.9.1.3.1.2 | INTEGER | read-only | mandatory |
| ctPicECOID OBJECT-TYPE Uniquely defines the ECO entry that is being described by this conceptual row. | 1.3.6.1.4.1.52.4.1.5.9.1.3.1.3 | INTEGER | read-only | mandatory |
| ctPicECONumber OBJECT-TYPE Defines Cabletron's ECO number that describes the revision of the hardware. This object is organized as follows: 6 Characters ECO Number 2 Characters Rework Location 4 Characters Date Code | 1.3.6.1.4.1.52.4.1.5.9.1.3.1.4 | DisplayString (SIZE(12)) | read-only | mandatory |
| ctPicLocationID OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.1.5.9.1.4 | |||
| ctPicLocationModule OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.1.5.9.1.4.1 | |||
| ctPicBrim OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.1.5.9.1.4.2 | |||
| ctPicChassis OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.1.5.9.1.4.3 | |||
| ctPicDaughter OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.1.5.9.1.4.4 | |||
| ctPicBackPlane OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.1.5.9.1.4.5 | |||
| ctPicDiagTable OBJECT-TYPE Each module that contains a PIC may have several Diags performed on it. The ctPicDiagTable reflects a history of the last 8 Diags that have been performed on this module. Important: This table only contains entries diagnostic entries that are defined. Therefore it is possible for this table to be empty 'does not respond to a GET or GET-NEXT' if there are no diagnostic errors present. | 1.3.6.1.4.1.52.4.1.5.9.1.5 | not-accessible | mandatory | |
| ctPicDiagEntry OBJECT-TYPE Describes a particular PIC Diag entry. | 1.3.6.1.4.1.52.4.1.5.9.1.5.1 | not-accessible | mandatory | |
| ctPicDiagSlot OBJECT-TYPE Specific slot which the module that realizes this PIC resides. If the PIC is associated with the chassis and not a specific module then this value will be 0. This refers to the same slot as identified by ctPicSlot in ctPicTable. | 1.3.6.1.4.1.52.4.1.5.9.1.5.1.1 | INTEGER | read-only | mandatory |
| ctPicDiagIndex OBJECT-TYPE The specific PIC instance that this Diag entry pertains to. This refers to the same instance as identified by ctPicIndex in ctPicTable. | 1.3.6.1.4.1.52.4.1.5.9.1.5.1.2 | INTEGER | read-only | mandatory |
| ctPicDiagID OBJECT-TYPE Uniquely defines the Diag entry that is being described by this conceptual row. | 1.3.6.1.4.1.52.4.1.5.9.1.5.1.3 | INTEGER (1..8) | read-only | mandatory |
| ctPicDiagResults OBJECT-TYPE Defines Cabletron's Diag results code. | 1.3.6.1.4.1.52.4.1.5.9.1.5.1.4 | DisplayString (SIZE(64)) | read-only | mandatory |
| ctPicControlTable OBJECT-TYPE A table allowing management control of PIC functionality. | 1.3.6.1.4.1.52.4.1.5.9.1.8 | not-accessible | mandatory | |
| ctPicControlEntry OBJECT-TYPE Describes a particular PIC Control Table entry. | 1.3.6.1.4.1.52.4.1.5.9.1.8.1 | not-accessible | mandatory | |
| ctPicRefresh OBJECT-TYPE Setting this value causes the PIC Driver to clear cached memory and to reread the PIC chip. This functionality removes the need for manufacturing to power cycle a board to ensure proper PIC programming. Reading this object always returns a zero (0). | 1.3.6.1.4.1.52.4.1.5.9.1.8.1.1 | INTEGER {reFresh(1)} | read-only | mandatory |