CT-FASTPATH-DHCPSERVER-MIB
- Registered at
- 1.3.6.1.4.1.52.4.2.32.1
- Last updated
- 2006-01-16 19:32
- Organization
- Enterasys Networks, Inc.
- Namespace
- enterasys
- Source file
CT-FASTPATH-DHCPSERVER-MIB- Digest
sha256:ceed727d528b3aa813c2680a8d7862b3750185b42e5e159636811865dca54d16
Description
The Enterasys MIB for FASTPATH DHCP Server
Contact
Postal: Enterasys Networks 50 Minuteman Rd. Andover, MA 01810-1008 USA Phone: +1 978 684 1000 E-mail: support@enterasys.com WWW: http://www.enterasys.com
Imports
| From | Symbols |
|---|---|
| CTRON-MIB-NAMES | ctDhcpServerExpMib |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowPointer, RowStatus, StorageType, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CT-FASTPATH-DHCPSERVER-MIB CTRON-MIB-NAMES CTRON-OIDS SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ctAgentDhcpServerGroup OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.32.1.1 | |||
| ctAgentDhcpServerAdminMode OBJECT-TYPE Admin-mode of the DHCP Server. | 1.3.6.1.4.1.52.4.2.32.1.1.1 | INTEGER {enable(1), disable(2)} | read-write | current |
| ctAgentDhcpServerPingPktNos OBJECT-TYPE The no. of packets a DHCP Server sends to a pool address as part of a ping operation.Setting the value of ping-packets to zero turns off DHCP Server ping operation . | 1.3.6.1.4.1.52.4.2.32.1.1.2 | INTEGER (0 | 2..10) | read-write | current |
| ctAgentDhcpServerAutomaticBindingsNos OBJECT-TYPE The no. of IP addresses that have been assigned automatically. | 1.3.6.1.4.1.52.4.2.32.1.1.3 | Counter32 | read-only | current |
| ctAgentDhcpServerExpiredBindingsNos OBJECT-TYPE The no. of expired leases. | 1.3.6.1.4.1.52.4.2.32.1.1.4 | Counter32 | read-only | current |
| ctAgentDhcpServerMalformedMessagesReceived OBJECT-TYPE The no. of malformed(truncated or corrupt) messages that have been received by the DHCP server. | 1.3.6.1.4.1.52.4.2.32.1.1.5 | Counter32 | read-only | current |
| ctAgentDhcpServerDISCOVERMessagesReceived OBJECT-TYPE The no. of DHCP messages of type DHCPDISCOVER that have been received by the DHCP server. | 1.3.6.1.4.1.52.4.2.32.1.1.6 | Counter32 | read-only | current |
| ctAgentDhcpServerREQUESTMessagesReceived OBJECT-TYPE The no. of DHCP messages of type DHCPREQUEST that have been received by the DHCP server. | 1.3.6.1.4.1.52.4.2.32.1.1.7 | Counter32 | read-only | current |
| ctAgentDhcpServerDECLINEMessagesReceived OBJECT-TYPE The no. of DHCP messages of type DHCPDECLINE that have been received by the DHCP server. | 1.3.6.1.4.1.52.4.2.32.1.1.8 | Counter32 | read-only | current |
| ctAgentDhcpServerRELEASEMessagesReceived OBJECT-TYPE The no. of DHCP messages of type DHCPRELEASE that have been received by the DHCP server. | 1.3.6.1.4.1.52.4.2.32.1.1.9 | Counter32 | read-only | current |
| ctAgentDhcpServerINFORMMessagesReceived OBJECT-TYPE The no. of DHCP messages of type DHCPINFORM that have been received by the DHCP server. | 1.3.6.1.4.1.52.4.2.32.1.1.10 | Counter32 | read-only | current |
| ctAgentDhcpServerOFFERMessagesSent OBJECT-TYPE The no. of DHCP messages of type DHCPOFFER that have been sent by the DHCP server. | 1.3.6.1.4.1.52.4.2.32.1.1.11 | Counter32 | read-only | current |
| ctAgentDhcpServerACKMessagesSent OBJECT-TYPE The no. of DHCP messages of type DHCPACK that have been sent by the DHCP server. | 1.3.6.1.4.1.52.4.2.32.1.1.12 | Counter32 | read-only | current |
| ctAgentDhcpServerNAKMessagesSent OBJECT-TYPE The no. of DHCP messages of type DHCPNAK that have been sent by the DHCP server. | 1.3.6.1.4.1.52.4.2.32.1.1.13 | Counter32 | read-only | current |
| ctAgentDhcpServerClearStatistics OBJECT-TYPE Clears the DHCP server statistics. | 1.3.6.1.4.1.52.4.2.32.1.1.14 | INTEGER {enable(1), disable(2)} | read-write | current |
| ctAgentDhcpServerBootpAutomatic OBJECT-TYPE Used to enable or disable autmatic address allocation to bootp clients from dynamic address pools. | 1.3.6.1.4.1.52.4.2.32.1.1.15 | INTEGER {enable(1), disable(2)} | read-write | current |
| ctAgentDhcpServerPoolConfigGroup OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.32.1.2 | |||
| ctAgentDhcpServerPoolNameCreate OBJECT-TYPE A pool is created by applying write operation on this MIB object and providing a new pool-name. Get operation on this MIB object returns a null-value, as for the purpose of viewing the pool name, the user should perform the traversal of ctAgentDhcpServerPoolConfigTable. For this reason the get operation on object ctAgentDhcpServerPoolNameCreate becomes insignificant. | 1.3.6.1.4.1.52.4.2.32.1.2.1 | DisplayString (SIZE(0 | 1..31)) | read-write | current |
| ctAgentDhcpServerPoolConfigTable OBJECT-TYPE A table of the DHCP Server Pool configuration entries. | 1.3.6.1.4.1.52.4.2.32.1.2.2 | not-accessible | current | |
| ctAgentDhcpServerPoolConfigEntry OBJECT-TYPE Represents entry for a Dhcp server pool. | 1.3.6.1.4.1.52.4.2.32.1.2.2.1 | not-accessible | current | |
| ctAgentDhcpServerPoolIndex OBJECT-TYPE The Pool Index, which 'll be used as index for the PoolConfig Table. | 1.3.6.1.4.1.52.4.2.32.1.2.2.1.1 | Unsigned32 (1..512) | read-only | current |
| ctAgentDhcpServerPoolName OBJECT-TYPE The name of the DHCP Address pool. This value cannot be modified | 1.3.6.1.4.1.52.4.2.32.1.2.2.1.2 | DisplayString (SIZE(1..31)) | read-only | current |
| ctAgentDhcpServerPoolDefRouter OBJECT-TYPE This specifies the default-router list(each default-router is separated by comma and the list is terminated by semi-colon) for a DHCP client, an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between).User should enter a 'null' or 'NULL' string to remove current default-router list. | 1.3.6.1.4.1.52.4.2.32.1.2.2.1.3 | DisplayString | read-write | current |
| ctAgentDhcpServerPoolDNSServer OBJECT-TYPE This specifies the DNS IP servers(each DNS IP server is separated by comma and the list is terminated by semi-colon) for a DHCP client, an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between).User should enter a 'null' or 'NULL' string to remove current default-router list. | 1.3.6.1.4.1.52.4.2.32.1.2.2.1.4 | DisplayString | read-write | current |
| ctAgentDhcpServerPoolLeaseTime OBJECT-TYPE This specifies the duration of the lease(in minutes) for an IP address that is assigened from a DHCP server to a DHCP client. For infinite leases, lease-time value will be set to 86400. | 1.3.6.1.4.1.52.4.2.32.1.2.2.1.5 | Integer32 (1..86400) | read-write | current |
| ctAgentDhcpServerPoolType OBJECT-TYPE This specifies the type of the binding that is associated with this pool. | 1.3.6.1.4.1.52.4.2.32.1.2.2.1.6 | INTEGER {un-allocated(0), dynamic(1), manual(2)} | read-only | current |
| ctAgentDhcpServerPoolNetbiosNameServer OBJECT-TYPE This specifies the IP address-list of Net BIOS name-servers that are available to DHCP clients (each IP address in this list is separated by comma and the list is terminated by semi-colon), an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between).User should enter a 'null' or 'NULL' string to remove current Net BIOS name-server list. | 1.3.6.1.4.1.52.4.2.32.1.2.2.1.7 | DisplayString | read-write | current |
| ctAgentDhcpServerPoolNetbiosNodeType OBJECT-TYPE This specifies the NetBIOS node-type for DHCP clients. 'none' is shown if node-type is not set to any of the four values. | 1.3.6.1.4.1.52.4.2.32.1.2.2.1.8 | INTEGER {none(0), b-node(1), p-node(2), m-node(4), h-node(8)} | read-write | current |
| ctAgentDhcpServerPoolNextServer OBJECT-TYPE This configures the next server in the boot-process of a DHCP clients.User should enter zero(0.0.0.0) to remove the current Next-server address | 1.3.6.1.4.1.52.4.2.32.1.2.2.1.9 | IpAddress | read-write | current |
| ctAgentDhcpServerPoolDomainName OBJECT-TYPE This specifies the domain-name for a DHCP client. User should enter a 'null' or 'NULL' string to remove specified domain-name. | 1.3.6.1.4.1.52.4.2.32.1.2.2.1.10 | DisplayString (SIZE(1..255)) | read-write | current |
| ctAgentDhcpServerPoolBootfile OBJECT-TYPE This specifies the name of the default boot image for a DHCP client.User should enter a 'null' or 'NULL' string to remove specified bootfile name. | 1.3.6.1.4.1.52.4.2.32.1.2.2.1.11 | DisplayString (SIZE(1..128)) | read-write | current |
| ctAgentDhcpServerPoolRowStatus OBJECT-TYPE The row status variable is used according to installation and removal conventions for conceptual rows. When a pool is created by applying write operation on 'ctAgentDhcpServerPoolCreateName',row-status becomes 'active'. If row-status for a poolEntry is set to 'destroy', the corresponding pool gets deleted. | 1.3.6.1.4.1.52.4.2.32.1.2.2.1.12 | RowStatus | read-write | current |
| ctAgentDhcpServerPoolAllocationTable OBJECT-TYPE A table of the DHCP Server's pool entries, showing the binding(dynamic/manual) specific parameters. | 1.3.6.1.4.1.52.4.2.32.1.2.3 | not-accessible | current | |
| ctAgentDhcpServerPoolAllocationEntry OBJECT-TYPE Represents entry for a Dhcp server's allocation pool. | 1.3.6.1.4.1.52.4.2.32.1.2.3.1 | not-accessible | current | |
| ctAgentDhcpServerPoolAllocationName OBJECT-TYPE This specifies name of the DHCP Address pool having dynamic binding. This value is same as ctAgentDhcpServerPoolName of the ctAgentDhcpServerPoolConfigTable. | 1.3.6.1.4.1.52.4.2.32.1.2.3.1.1 | DisplayString (SIZE(1..30)) | read-only | current |
| ctAgentDhcpServerDynamicPoolIpAddress OBJECT-TYPE The IP address of the DHCP Address pool. The IP address must be set before setting the IP Mask or IP Prefix Length. After setting IP address, network -mask, or IP Prefix length must be set in order to change the pool type to dynamic. This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'manual'. | 1.3.6.1.4.1.52.4.2.32.1.2.3.1.2 | IpAddress | read-write | current |
| ctAgentDhcpServerDynamicPoolIpMask OBJECT-TYPE The bit-combination that renders which portion of the address of the DHCP address pool refers to the network or subnet and which part refers to the host.The IP address must have been set before. This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'manual'. | 1.3.6.1.4.1.52.4.2.32.1.2.3.1.3 | IpAddress | read-write | current |
| ctAgentDhcpServerDynamicPoolIpPrefixLength OBJECT-TYPE This specifies the no. of bits that comprise the address-prefix. The prefix is an alternative way of specifying the network-mask of the client.The IP address must have been set before. This value shows 0, if the binding type is 'un-allocated',or,'mnaual'. | 1.3.6.1.4.1.52.4.2.32.1.2.3.1.4 | Unsigned32 | read-write | current |
| ctAgentDhcpServerPoolAllocationType OBJECT-TYPE This specifies the type of the binding that is associated with this pool. | 1.3.6.1.4.1.52.4.2.32.1.2.3.1.5 | INTEGER {un-allocated(0), dynamic(1), manual(2)} | read-only | current |
| ctAgentDhcpServerManualPoolClientIdentifier OBJECT-TYPE It specifies the unique identifier (in colon separated hexadecimal format) of a DHCP client. It is valid for manual bindings only. It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'. To set this object, input should be 7 octets long with the hardware type in the first octet. | 1.3.6.1.4.1.52.4.2.32.1.2.3.1.6 | DisplayString | read-write | current |
| ctAgentDhcpServerManualPoolClientName OBJECT-TYPE It specifies the name of a DHCP client. Client name should't include domain-name. It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'. | 1.3.6.1.4.1.52.4.2.32.1.2.3.1.7 | DisplayString (SIZE(1..30)) | read-write | current |
| ctAgentDhcpServerManualPoolClientHWAddr OBJECT-TYPE It specifies the hardware-address of a DHCP client. It is valid for manual bindings only. It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'. After hardware-address, hardware-type will be configured. | 1.3.6.1.4.1.52.4.2.32.1.2.3.1.8 | DisplayString | read-write | current |
| ctAgentDhcpServerManualPoolClientHWType OBJECT-TYPE It specifies the hardware-type of a DHCP client. It is valid for manual bindings only. It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'. Before this, hardware-address must be configured. | 1.3.6.1.4.1.52.4.2.32.1.2.3.1.9 | INTEGER {ethernet(1), ieee802(6)} | read-write | current |
| ctAgentDhcpServerManualPoolIpAddress OBJECT-TYPE The IP address of the DHCP Address pool for manual binding. The IP address must be set before setting the IP Mask or IP Prefix Length.After setting IP address, network -mask, or IP Prefix length must be set in order to change the pool type to dynamic. This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'dynamic'. | 1.3.6.1.4.1.52.4.2.32.1.2.3.1.10 | IpAddress | read-write | current |
| ctAgentDhcpServerManualPoolIpMask OBJECT-TYPE The bit-combination that renders which portion of the address of the DHCP address pool for a manual binding refers to the network or subnet and which part refers to the host. The IP address must have been set before. This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'dynamic'. | 1.3.6.1.4.1.52.4.2.32.1.2.3.1.11 | IpAddress | read-write | current |
| ctAgentDhcpServerManualPoolIpPrefixLength OBJECT-TYPE This specifies the no. of bits that comprise the address-prefix. The prefix is an alternative way of specifying the network-mask of the client.The IP address must have been set before. This value shows 0, if the binding type is 'un-allocated',or,'dynamic'. | 1.3.6.1.4.1.52.4.2.32.1.2.3.1.12 | Unsigned32 | read-write | current |
| ctAgentDhcpServerExcludedAddressRangeCreate OBJECT-TYPE It sets the IP address-ranges(from low to high) that a DHCP server should not assign to DHCP clients. Each time this MIB object is set successfully, one excluded range of IP address will be set. It is given in format - start and end IP address separated by '-' and terminated by ';'. One example would be - 192.168.36.1-200.1.1.1; . This sets one excluded range of IP address,which starts at 192.168.36.1 and ends at 200.1.1.1. If only start IP address is given, end IP address is assumed to be equal to the start IP address. Get operation on this MIB object returns a null-value, as for the purpose of viewing the exclude-address ranges, the user should perform the traversal of ctAgentDhcpServerExcludedAddressRangeTable. For this reason the get operation on object ctAgentDhcpServerExcludedAddressRangeCreate becomes insignificant. | 1.3.6.1.4.1.52.4.2.32.1.2.4 | DisplayString | read-write | current |
| ctAgentDhcpServerExcludedAddressRangeTable OBJECT-TYPE A table of the DHCP Server Pool configuration entries. | 1.3.6.1.4.1.52.4.2.32.1.2.5 | not-accessible | current | |
| ctAgentDhcpServerExcludedAddressRangeEntry OBJECT-TYPE Represents entry for a Dhcp server excluded address range table. | 1.3.6.1.4.1.52.4.2.32.1.2.5.1 | not-accessible | current | |
| ctAgentDhcpServerExcludedRangeIndex OBJECT-TYPE This specifies the index of the excluded IP address-range table. | 1.3.6.1.4.1.52.4.2.32.1.2.5.1.1 | Unsigned32 (1..256) | read-only | current |
| ctAgentDhcpServerExcludedStartIpAddress OBJECT-TYPE This specifies the starting IP address of the excluded address-range. | 1.3.6.1.4.1.52.4.2.32.1.2.5.1.2 | IpAddress | read-only | current |
| ctAgentDhcpServerExcludedEndIpAddress OBJECT-TYPE This specifies the ending IP address of the excluded address-range. | 1.3.6.1.4.1.52.4.2.32.1.2.5.1.3 | IpAddress | read-only | current |
| ctAgentDhcpServerExcludedAddressRangeStatus OBJECT-TYPE This specifies the row-status of the excluded address-range. Implemented values are - active(1) and destroy(6). For a valid range, the row-satus will return active(1). When it is set to destroy(6), the corresponding address-range is deleted. | 1.3.6.1.4.1.52.4.2.32.1.2.5.1.4 | RowStatus | read-write | current |
| ctAgentDhcpServerPoolOptionCreate OBJECT-TYPE This sets the option for an existing DHCP Server pool. Here, it is required to enter the pool-index, for which option is to be set and the value of the DHCP option code in string-format : pool-index and option code separated by '-' and terminated by ';', one example would be -> 1-19; , 1 is the pool-index and 19 is the option code. | 1.3.6.1.4.1.52.4.2.32.1.2.6 | DisplayString | read-write | current |
| ctAgentDhcpServerPoolOptionTable OBJECT-TYPE A table for configuring DHCP Server options. | 1.3.6.1.4.1.52.4.2.32.1.2.7 | not-accessible | current | |
| ctAgentDhcpServerPoolOptionEntry OBJECT-TYPE Represents entry for a Dhcp server option table. | 1.3.6.1.4.1.52.4.2.32.1.2.7.1 | not-accessible | current | |
| ctAgentDhcpServerPoolOptionIndex OBJECT-TYPE The Pool Index alongwith option-code, acts as index for the DHCP Server Option table. | 1.3.6.1.4.1.52.4.2.32.1.2.7.1.1 | Unsigned32 (1..512) | read-only | current |
| ctAgentDhcpServerPoolOptionCode OBJECT-TYPE This specifies the DHCP option code. This alongwith pool-index acts as the index of the DHCP Server Option table. | 1.3.6.1.4.1.52.4.2.32.1.2.7.1.2 | Unsigned32 (1..254) | read-write | current |
| ctAgentDhcpServerOptionPoolName OBJECT-TYPE The name of the DHCP Address pool. This value cannot be modified | 1.3.6.1.4.1.52.4.2.32.1.2.7.1.3 | DisplayString (SIZE(1..31)) | read-only | current |
| ctAgentDhcpServerPoolOptionAsciiData OBJECT-TYPE This specifies an NVT ASCII character string. ASCII character strings that contain white space must be delimited by quotation marks. If an ascii optiondata is entered again, it gets concatenated with the previous ascii data. | 1.3.6.1.4.1.52.4.2.32.1.2.7.1.4 | DisplayString (SIZE(1..441)) | read-write | current |
| ctAgentDhcpServerPoolOptionHexData OBJECT-TYPE This specifies semi-colon separated hexadecimal data. Two hexadecimal digits in hexadecimal character string represents one byte . Hexadecimal strings can be entered in the following formats : 1) continuous hexadecimal digits like -- 0123456789abcdef 2) hexadecimal digits separated by space ' ' -- 01 23 45 67 de 0f 3) Two hexadecimal digits separated by delimeter ':' -- 01:02:a0 de:0f 78:5e 4) Four hexadecimal digits separated by delimeter '.' -- 01ab.c0de.7865 If a Hex optiondata is entered again, it gets concatenated with the previous Hex data. | 1.3.6.1.4.1.52.4.2.32.1.2.7.1.5 | DisplayString (SIZE(1..1324)) | read-write | current |
| ctAgentDhcpServerPoolOptionIpAddressData OBJECT-TYPE This specifies the IP-address list(each IP-address is separated by comma and the list is terminated by semi-colon) for a DHCP client, an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between). If a IP option is entered again, it gets concatenated with the previous IP data. Maximum no. of IP addresses that can be entered at one time is 8. | 1.3.6.1.4.1.52.4.2.32.1.2.7.1.6 | DisplayString | read-write | current |
| ctAgentDhcpServerPoolOptionStatus OBJECT-TYPE This specifies the row-status of the DHCP Server Pool option. | 1.3.6.1.4.1.52.4.2.32.1.2.7.1.7 | RowStatus | read-write | current |
| ctAgentDhcpServerLeaseGroup OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.32.1.3 | |||
| ctAgentDhcpServerLeaseClearAllBindings OBJECT-TYPE Clears All the DHCP server bindings. | 1.3.6.1.4.1.52.4.2.32.1.3.1 | INTEGER {enable(1), disable(2)} | read-write | current |
| ctAgentDhcpServerLeaseTable OBJECT-TYPE A table of the DHCP Server's Lease entries. | 1.3.6.1.4.1.52.4.2.32.1.3.2 | not-accessible | current | |
| ctAgentDhcpServerLeaseEntry OBJECT-TYPE Represents entry for a Dhcp server's leases. | 1.3.6.1.4.1.52.4.2.32.1.3.2.1 | not-accessible | current | |
| ctAgentDhcpServerLeaseIPAddress OBJECT-TYPE This specifies the IP address leased to the client. | 1.3.6.1.4.1.52.4.2.32.1.3.2.1.1 | IpAddress | read-only | current |
| ctAgentDhcpServerLeaseIPMask OBJECT-TYPE This specifies the IP mask of the address leased to the client. | 1.3.6.1.4.1.52.4.2.32.1.3.2.1.2 | IpAddress | read-only | current |
| ctAgentDhcpServerLeaseHWAddress OBJECT-TYPE This specifies the hardware address of the client. | 1.3.6.1.4.1.52.4.2.32.1.3.2.1.3 | MacAddress | read-only | current |
| ctAgentDhcpServerLeaseRemainingTime OBJECT-TYPE This specifies the period for which the lease is valid. It is displayed in days, hours, minutes, and seconds. | 1.3.6.1.4.1.52.4.2.32.1.3.2.1.4 | TimeTicks | read-only | current |
| ctAgentDhcpServerLeaseType OBJECT-TYPE This specifies the type of address lease as Automatic or Manual. | 1.3.6.1.4.1.52.4.2.32.1.3.2.1.5 | INTEGER {automatic(1), manual(2)} | read-only | current |
| ctAgentDhcpServerLeaseStatus OBJECT-TYPE This specifies the row-status of the address-lease. Implemented values are - active(1) and destroy(6). For a valid range, the row-satus will return active(1). When it is set to destroy(6), the corresponding address-lease is cleared. | 1.3.6.1.4.1.52.4.2.32.1.3.2.1.6 | RowStatus | read-write | current |
| ctAgentDhcpServerAddressConflictGroup OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.2.32.1.4 | |||
| ctAgentDhcpServerClearAllAddressConflicts OBJECT-TYPE Clears all the address-conflicts found by DHCP server,when set to enable. | 1.3.6.1.4.1.52.4.2.32.1.4.1 | INTEGER {enable(1), disable(2)} | read-write | current |
| ctAgentDhcpServerAddressConflictLogging OBJECT-TYPE It is used to enable, or disables the logging of address-conflicts on a DHCP Server. | 1.3.6.1.4.1.52.4.2.32.1.4.2 | INTEGER {enable(1), disable(2)} | read-write | current |
| ctAgentDhcpServerAddressConflictTable OBJECT-TYPE A table of the conflicting-address entries. | 1.3.6.1.4.1.52.4.2.32.1.4.3 | not-accessible | current | |
| ctAgentDhcpServerAddressConflictEntry OBJECT-TYPE Represents a conflicting-address entry. | 1.3.6.1.4.1.52.4.2.32.1.4.3.1 | not-accessible | current | |
| ctAgentDhcpServerAddressConflictIP OBJECT-TYPE This specifies the conflicting IP address assigned to the client by DHCP server. | 1.3.6.1.4.1.52.4.2.32.1.4.3.1.1 | IpAddress | read-only | current |
| ctAgentDhcpServerAddressConflictDetectionType OBJECT-TYPE This specifies the address-conflict detection-method. | 1.3.6.1.4.1.52.4.2.32.1.4.3.1.2 | INTEGER {ping(1), gratuitousArp(2)} | read-only | current |
| ctAgentDhcpServerAddressConflictDetectionTime OBJECT-TYPE This specifies the sysUpTime at which the address-conflict was detected. | 1.3.6.1.4.1.52.4.2.32.1.4.3.1.3 | TimeTicks | read-only | current |
| ctAgentDhcpServerAddressConflictStatus OBJECT-TYPE This specifies the row-status of the conflicting-address entry. Implemented values are - active(1) and destroy(6). For a valid range, the row-satus will return active(1). When it is set to destroy(6), the corresponding conflicting-address entry is cleared. | 1.3.6.1.4.1.52.4.2.32.1.4.3.1.4 | RowStatus | read-write | current |