CPQSTDEQ-MIB

type

OBJECT-IDENTITY

OBJECT-IDENTITY

OBJECT-TYPE

The Major Revision level of the MIB. A change in the major revision level represents a major change in the architecture of the MIB. A change in the major revision level may indicate a significant change in the information supported and/or the meaning of the supported information, correct interpretation of data may require a MIB document with the same major revision level.

OBJECT-TYPE

The Minor Revision level of the MIB. A change in the minor revision level may represent some minor additional support, no changes to any pre-existing information has occurred.

OBJECT-TYPE

The overall condition. This object represents the overall status of the server represented by this MIB.

OBJECT-IDENTITY

OBJECT-IDENTITY

OBJECT-IDENTITY

OBJECT-TYPE

The Insight Agent's polling frequency. The frequency, in seconds, at which the Insight Agent requests information from the device driver. A frequency of zero (0) indicates that the Insight Agent retrieves the information upon request of a management station, it does not poll the device driver at a specific interval. If the poll frequency is zero (0) all attempts to write to this object will fail. If the poll frequency is non-zero, setting this value will change the polling frequency of the Insight Agent. Setting the poll frequency to zero (0) will always fail, an agent may also choose to fail any request to change the poll frequency to a value that would severely impact system performance.

OBJECT-TYPE

A table of software modules that provide an interface to the device this MIB describes.

OBJECT-TYPE

A description of a software module that provides an interface to the device this MIB describes.

OBJECT-TYPE

A unique index for this module description.

OBJECT-TYPE

The module name.

OBJECT-TYPE

The module version in XX.YY format. Where XX is the major version number and YY is the minor version number. This field will be a null (size 0) string if the agent cannot provide the module version.

OBJECT-TYPE

The module date. field octets contents range ===== ====== ======= ===== 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minute 0..59 6 7 second 0..60 (use 60 for leap-second) This field will be set to year = 0 if the agent cannot provide the module date. The hour, minute, and second field will be set to zero (0) if they are not relevant. The year field is set with the most significant octet first.

OBJECT-TYPE

The purpose of the module described in this entry.

OBJECT-IDENTITY

OBJECT-TYPE

A list of the CPUs (processors) in the system. The main processor (if such a concept is valid for this machine) should be the first entry in the table.

OBJECT-TYPE

A description of a CPU (processor) in the system.

OBJECT-TYPE

This is a number that uniquely specifies a processor unit. A processing unit may be a set of processing chips that are on the same board or for other reasons work together as a unit. The main processor unit (if such a concept is valid for this machine) will always have the lowest (first) index.

OBJECT-TYPE

This value represents this processor's slot. If the slot cannot be determined the value of zero (0) will be returned.

OBJECT-TYPE

The name of this processor. For example: 80386

OBJECT-TYPE

The current internal speed of this processor in megahertz. This changes as per the processor performance state Zero will be returned if this value is not available.

OBJECT-TYPE

This step of the processor. This will be zero (0) if the step cannot be determined.

OBJECT-TYPE

The status of the processor. The following values are valid for CPU status: Unknown (1) The status of the CPU could not be determined. OK (2) The CPU is functioning normally. Degraded (3) The CPU is in a pre-failure warrantee state. Failed (4) The CPU is in a failed state. Disabled (5) The CPU has been disabled during power-on-self-test.

OBJECT-TYPE

This is the external frequency in megahertz of the processor bus. Zero will be returned if this value is not available.

OBJECT-TYPE

This attribute specifies the manufacturer which designs this CPU.

OBJECT-TYPE

The physical socket number of the CPU chip. This number helps to identify CPUs on processor boards that contain multiple CPU chips. In most cases the CPU Socket number should be specified on the board silkscreen or in product documentation.

OBJECT-TYPE

CPU threshold passed (Exceeded). When this attribute is set to true, it identifies a pre-failure error condition. Processors like the Intel Pentium Pro have the capability built into them to correct internal error conditions. Excessive corrected internal errors can predict future hard processor failures. Agent instrumentation will set this attribute to true if an internal processor error threshold is passed. It is recommended that the user replace the CPU in this case. If the processor does not support monitoring internal corrected errors, this value will be set to unsupported.

OBJECT-TYPE

A text description of the hardware location, on complex multi SBB hardware only, for the CPU. A NULL string indicates that the hardware location could not be determined or is irrelevant.

OBJECT-TYPE

This is the index for the cell in cpqSeCellTable where this CPU is physically located.

OBJECT-TYPE

This is the status of CPU power pod. Potential values in the future could be present/not present.

OBJECT-TYPE

This is the CPU architecture revision.

OBJECT-TYPE

The number of cores in this CPU module. Zero will be returned if can not be determined.

OBJECT-TYPE

The OEM serial number of the CPU.

OBJECT-TYPE

The OEM part number of the CPU.

OBJECT-TYPE

The manufacturer serial number of the CPU.

OBJECT-TYPE

The manufacturer part number of the CPU.

OBJECT-TYPE

This is a number that uniquely identifies a core in a CPU unit.

OBJECT-TYPE

This is the maximum internal speed in megahertz this processor can support. Zero will be returned if this value is not available.

OBJECT-TYPE

This is an unique number to identify the running threads in a CPU core.

OBJECT-TYPE

CPU chip generation name e.g. Hondo, Montecito, Madison, Opteron.

OBJECT-TYPE

This OID identifies whether the CPU threading is enabled or not.

OBJECT-TYPE

This OID indicates the maximum number of threads that a cpu core is capable of.

OBJECT-TYPE

Servers like Itanium has capability to lower power supply to CPU if it is idle for specified period of time. Proliant servers can set to high/low/Dynamic mode of power through ILO. The following values are valid for CPU Low Powered state: Unknown (1) The Low Powered status could not be determined. Low Powered (2) The CPU is Low Power state. Normal Powered (3) The CPU is normal Power state. High Powered (4) The CPU is High Power state.

OBJECT-TYPE

On SMP systems one of the CPU is set to Primary and the other CPUs as secondary. A value of true is set if the CPU is primary. The following values are valid for CPU availability status: Unknown (1) The CPU Primary/Secondary could not be determined. false (2) The CPU is not primary CPU. True (3) The CUR is primary CPU.

OBJECT-TYPE

The processor stepping version string. A NULL string indicates that the stepping could not be determined.

OBJECT-TYPE

This OID returns the current performance state of this processor. Processor performance states are denoted as Pn states. The value of n is cpqSeCpuPerformanceState. The higher the value n is, the lower the performance state is being used. Value 0 describes the highest performance state, in which the processor uses its maximum performance capability and may consume maximum power. The performance state number should not exceed 16 on Itanium servers. (-1) will be returned if this value is not available.

OBJECT-TYPE

This OID returns the minimum performance state set for this processor. (-1) will be returned if this value is not available.

OBJECT-TYPE

This OID returns the maximum performance state set for this processor. (-1) will be returned if this value is not available.

OBJECT-TYPE

A list of the FPUs (floating point coprocessors) in the system.

OBJECT-TYPE

A description of a FPU in the system. The fpuUnitIndex of any entry in this table will equal the cpuUnitIndex of the corresponding CPU in the cpqSeCpu table.

OBJECT-TYPE

This is a number that uniquely specifies a processor unit. A processing unit may be a set of processing chips that are on the same board or for other reasons work together as a unit. The main processor unit (if there is one) will always have the lowest (first) index. This field can be used to associate CPUs with their corresponding FPUs.

OBJECT-TYPE

This is a number that uniquely specifies the FPU chip. This field is used to distinguish between multiple FPUs that are part of the same processor unit. For example, If a processor board contained a Intel 80386 processor with both a Intel 80387 and a Weitek 3167, both the 80387 and the 3167 would have the same fpuUnitIndex (which would match the 80386's cpuUnitIndex) but the 80387 and the 3167 would have different fpuChipIndex field values.

OBJECT-TYPE

This is the FPU's slot. If the slot cannot be determined the value of zero (0) will be returned.

OBJECT-TYPE

This is the name of the FPU. For example: 80387 Weitek 3167

OBJECT-TYPE

This is speed in megahertz of the FPU. Zero will be returned if this value is not available.

OBJECT-TYPE

This value indicates if the FPU this entry is describing is embedded in the CPU or external to the CPU chip.

OBJECT-TYPE

A text description of the hardware location, on complex multi SBB hardware only, for the FPU. A NULL string indicates that the hardware location could not be determined or is irrelevant.

OBJECT-TYPE

A list of the CPU caches in the system.

OBJECT-TYPE

A description of a CPU Caches in the system.

OBJECT-TYPE

This is a number that uniquely specifies a processor unit. A processing unit may be a set of processing chips that are on the same board or for other reasons work together as a unit. The main processor unit (if such a concept is valid for this machine) will always have the lowest (first) index.

OBJECT-TYPE

This is the processor cache level. The lower the processor cache level, the closer the cache is to the processor.

OBJECT-TYPE

The size of the cache in kilobytes.

OBJECT-TYPE

This is speed in cache memory in nanoseconds (ns). A value of zero (0) means that the cache speed is unknown or unobtainable.

OBJECT-TYPE

The status of the cache unit. If the cache is optional and not installed, unknown(1) will be returned.

OBJECT-TYPE

Specifies write policy of this cache entry.

OBJECT-TYPE

A text description of the hardware location, on complex multi SBB hardware only, for the CPU cache. A NULL string indicates that the hardware location could not be determined or is irrelevant.

OBJECT-TYPE

This is the CPU Slot associated with this CPU cache.

OBJECT-TYPE

This is a unique number that identifies the core in the CPU slot to which this cache is associated. If the cache is not associated with any core on a multi-core CPU, the value should be -1.

OBJECT-TYPE

This value specifies the overall condition of the processor sub-system.

OBJECT-IDENTITY

OBJECT-TYPE

The amount of base memory in kilobytes. A kilobyte is 1024 bytes.

OBJECT-TYPE

The total amount of memory in kilobytes. A kilobyte is 1024 bytes.

OBJECT-TYPE

The total amount of memory in megabytes. A megabyte is 1024 kilobytes.

OBJECT-IDENTITY

OBJECT-TYPE

The contents of the ISA CMOS.

OBJECT-IDENTITY

OBJECT-TYPE

A list of EISA slot information entries.

OBJECT-TYPE

A description of an EISA slot.

OBJECT-TYPE

The EISA slot number for this entry describes.

OBJECT-TYPE

The EISA slot data for the board in this slot. This octet string contains the following EISA slot information: The first octet will be zero (0) if this slot contains a properly configured board. Any other value indicates that the EISA configuration information for this board is invalid or an error occurred when trying to retrieve the information. The second octet contains several bit flags about the product ID and slot type. Bit 7: 0 = No duplicate ID 1 = Duplicate IDs Bit 6: 0 = Product ID readable 1 = Product ID not readable Bit 5,4: 00 = Expansion slot 01 = Embedded device 10 = Virtual device 11 = Reserved Bit 3..0: This nibble indicates which CFG file is loaded when duplicate file names are present. 0000 = No duplicate ID 0001 = First duplicate ID 0010 = Second duplicate ID 0011 = Third duplicate ID . . . 1111 = Fifteenth duplicate ID NOTE: Bit 7 is the most significant bit, bit 0 is the least significant. The third octet contains the major revision level of the configuration utility. The fourth octet contains the minor revision level of the configuration utility. The fifth octet contains the most significant byte of the configuration file checksum. The sixth octet contains the least significant byte of the configuration file checksum. The seventh octet contains the number of device functions defined for the board in this slot. The eighth octet contains the combined function information. This is a set of flags. Each bit has the following meaning when set (1): Bit 7: reserved (0) Bit 6: slot has one or more free form data entries Bit 5: slot has one or more port initialization entries. Bit 4: slot has one or more port range entries. Bit 3: slot has one or more DMA entries. Bit 2: slot has one or more interrupt (IRQ) entries. Bit 1: slot has one or more memory entries. Bit 0: slot has one or more function type definitions. NOTE: bit 7 is the most significant bit, bit 0 is the least significant. The ninth, tenth, eleventh, and twelfth octets contain the four byte compressed EISA ID. For more information about the meaning of this information consult the EISA Technical Reference Guide.

OBJECT-TYPE

A seven character board ID. The first three characters are the manufacturers ID followed by three character product ID followed by a one character revision level.

OBJECT-TYPE

The product name (or other suitable description) of this board. This field may be empty if no descriptive information is known about the board.

OBJECT-TYPE

The revision level of the EISA configuration utility that was used to configure the system. This should be the same version information displayed by the EISA configuration utility.

OBJECT-TYPE

The type of slot described by this entry.

OBJECT-TYPE

A list EISA function information entries.

OBJECT-TYPE

A description of an EISA function.

OBJECT-TYPE

The EISA slot of the board that registered this function

OBJECT-TYPE

The number of the function this entry describes.

OBJECT-TYPE

The status of the function described by this entry.

OBJECT-TYPE

The type of the function. The type may be followed by one or more subtype description fields. Some currently defined types are: Type Meaning ============== ================================================== COM Communication device COM,ASY ISA compatible 8250 based serial port COM,ASY,FIFO ISA compatible 16550 based serial port (with fifo) COM,SYN ISA compatible SDLC port CPU Microprocessor CPU,8086 8086 compatible microprocessor CPU,80286 80286 compatible microprocessor CPU,80386SX 80386SX compatible microprocessor CPU,80386 80386 compatible microprocessor CPU,80486 80486 compatible microprocessor JOY ISA compatible joystick adapter KEY Keyboard KEY,nnn,KBD=xx Standard keyboard with nnn keys for country xx MEM Memory board MFC Multifunction board MSD Mass storage device MSD,DSKCTL ISA compatible fixed disk controller MSD,FPYCTL ISA compatible floppy disk controller MSD,TAPCTL Primary tape controller NET Network board NPX Numeric coprocessor NPX,287 Intel 287 numeric coprocessor NPX,387 Intel 387 numeric coprocessor NPX,387SX Intel 387SX numeric coprocessor NPX,W1167 Weitek 1167 numeric coprocessor NPX,W3167 Weitek 3167 numeric coprocessor OSE Operating system/environment OTH Other PAR ISA compatible parallel port PAR,BID Bidirectional parallel port PTR Pointing device PTR,8042 8042 pointing device (mouse) interface SYS System board VID Video board VID,MDA ISA compatible monochrome adapter VID,MDA,MGA Hercules monochrome adapter VID,CGA CGA, no write sync during retrace required VID,CGA,RTR CGA, write sync during retrace required VID,EGA ISA compatible EGA adapter VID,VGA ISA compatible VGA adapter This list is not intended to be complete. Other types may be found in this field. This list describes some of the more common types found, other types should be similarly recognizable to someone sufficiently knowledgeable about computer hardware.

OBJECT-TYPE

The revision of the EISA configuration .OVL file used to configure this board.

OBJECT-TYPE

The selections that were chosen with the EISA CONFIGURATION UTILITY to create this function.

OBJECT-TYPE

The EISA function information block. This is a set of flags indicating the resources that are configured in this EISA function. Each bit has the following meaning when it is set (1): Bit 7: Function is disabled Bit 6: This function contains free-form information. Bit 5: This function contains port initialization entries. Bit 4: This function contains port range entries. Bit 3: This function contains DMA entries. Bit 2: This function contains interrupt (IRQ) entries. Bit 1: This function contains memory entries. Bit 0: This function contains function type definitions. NOTE: bit 7 is the most significant bit, bit 0 is the least significant.

OBJECT-TYPE

A list of EISA function memory configuration entries.

OBJECT-TYPE

A description of an EISA function memory configuration.

OBJECT-TYPE

The EISA slot number of the board that registered the memory configuration this entry describes.

OBJECT-TYPE

The function in which this memory configuration was registered.

OBJECT-TYPE

The index for this memory allocation entry in the EISA function block.

OBJECT-TYPE

The starting address of the memory configuration.

OBJECT-TYPE

The size in bytes of the memory configuration.

OBJECT-TYPE

This value indicates if the memory is shareable.

OBJECT-TYPE

The type of memory.

OBJECT-TYPE

This value indicates if the memory is cached.

OBJECT-TYPE

The type of access permitted for this memory.

OBJECT-TYPE

The memory decode size (the number of address lines supported).

OBJECT-TYPE

The data access size for the memory in bits.

OBJECT-TYPE

A list of EISA function interrupt configuration entries.

OBJECT-TYPE

A description of an EISA function interrupt configuration.

OBJECT-TYPE

The EISA slot number of the board that registered the interrupt configuration this entry describes.

OBJECT-TYPE

The function in which this interrupt configuration was registered.

OBJECT-TYPE

The index for this interrupt allocation entry in the EISA function block.

OBJECT-TYPE

The interrupt described in this entry.

OBJECT-TYPE

This value indicates if the interrupt is shareable.

OBJECT-TYPE

This value indicates if the interrupt is edge or level triggered.

OBJECT-TYPE

A list of EISA function DMA configuration entries.

OBJECT-TYPE

A description of an EISA function DMA configuration.

OBJECT-TYPE

The EISA slot number of the board that registered the DMA configuration this entry describes.

OBJECT-TYPE

The function in which this DMA configuration was registered.

OBJECT-TYPE

The index for this DMA channel allocation entry in the EISA function block.

OBJECT-TYPE

The DMA channel described in this entry.

OBJECT-TYPE

This value indicates if the DMA channel is shareable.

OBJECT-TYPE

This value indicates the timing (transfer rate) associated with this configuration of the DMA channel.

OBJECT-TYPE

This value indicates the transfer size in bits used over this DMA channel.

OBJECT-TYPE

This value indicates the addressing scheme for the DMA channel.

OBJECT-TYPE

A list of EISA function port I/O configuration entries.

OBJECT-TYPE

A description of an EISA function port I/O configuration.

OBJECT-TYPE

The EISA slot number of the board that registered the I/O port configuration this entry describes.

OBJECT-TYPE

The function in which this port I/O configuration was registered.

OBJECT-TYPE

The index for this I/O port range allocation entry in the EISA function block.

OBJECT-TYPE

The I/O port address being described in this entry.

OBJECT-TYPE

This value indicates if the port is shareable.

OBJECT-TYPE

The number of sequential ports starting at the eisaPortAddrIndex that are be configured.

OBJECT-TYPE

A list of EISA function free form entries.

OBJECT-TYPE

A description of an EISA function free form.

OBJECT-TYPE

The EISA slot number of the board that registered the free form information this entry describes.

OBJECT-TYPE

The function in which this free form was registered.

OBJECT-TYPE

The free form value.

OBJECT-TYPE

A list of EISA function port initialization entries.

OBJECT-TYPE

A description of an EISA function port initialization.

OBJECT-TYPE

The EISA slot number of the board that registered the port initialization this entry describes.

OBJECT-TYPE

The function in which this port initialization was registered.

OBJECT-TYPE

The index for this port initialization entry in the EISA function block.

OBJECT-TYPE

This indicates if a mask will be used when performing initialization.

OBJECT-TYPE

This value indicates the number of bits this entry initializes.

OBJECT-TYPE

This value indicates the port address this entry initializes.

OBJECT-TYPE

This indicates the value to which this port is initialized.

OBJECT-TYPE

This value indicates the mask to use when performing initialization.

OBJECT-IDENTITY

OBJECT-TYPE

System ROM version information.

OBJECT-TYPE

A table of option ROM descriptions.

OBJECT-TYPE

An option ROM description.

OBJECT-TYPE

The starting address of the option ROM. This value indicates the number of bytes from the start of physical memory to the beginning of this option ROM.

OBJECT-TYPE

The size in bytes of the option ROM.

OBJECT-TYPE

The BIOS ROM data area. This may be the current contents or a copy of the BIOS ROM data area from when the Insight Agent was initialized.

OBJECT-TYPE

System ROM version information for the redundant ROM image. This will be left blank if the system does not support a redundant ROM.

OBJECT-TYPE

SMBIOS version information.

OBJECT-TYPE

The version of Management Processor Firmware.

OBJECT-TYPE

The version of the manageability firmware.

OBJECT-TYPE

The version of the virtual machine firmware.

OBJECT-IDENTITY

OBJECT-TYPE

A description of the keyboard.

OBJECT-IDENTITY

OBJECT-TYPE

A description of the video system in the computer. This may include the manufacturer, board name, modes supported, etc..

OBJECT-IDENTITY

OBJECT-TYPE

A table of serial port descriptions.

OBJECT-TYPE

A description of a serial port.

OBJECT-TYPE

An index that uniquely specifies this entry.

OBJECT-TYPE

The I/O port address used by this serial port.

OBJECT-TYPE

A text description of further information known about the serial port. This may be an empty string if no further information is known.

OBJECT-TYPE

A text description of the hardware location, on complex multi SBB hardware only, for the serial port. A NULL string indicates that the hardware location could not be determined or is irrelevant.

OBJECT-IDENTITY

OBJECT-TYPE

A table of parallel port descriptions.

OBJECT-TYPE

A description of a parallel port.

OBJECT-TYPE

An index that uniquely specifies this entry.

OBJECT-TYPE

The I/O port address used by this parallel port.

OBJECT-TYPE

A text description of further information known about the parallel port. This may be an empty string if no further information is known.

OBJECT-TYPE

A text description of the hardware location, on complex multi SBB hardware only, for the parallel port. A NULL string indicates that the hardware location could not be determined or is irrelevant.

OBJECT-IDENTITY

OBJECT-TYPE

A table of floppy drive descriptions.

OBJECT-TYPE

A floppy drive description.

OBJECT-TYPE

An index that uniquely specifies this entry. If possible, this field will map directly to the drive letter (0 for A:, 1 for B:).

OBJECT-TYPE

The type (capacity) of the floppy drive. The following values are valid: other (1) This floppy drive could not be identified. drive360k (2) This is a 360 kilobyte, 5.25 inch floppy drive. drive1200k (3) This is a 1.2 megabyte, 5.25 inch floppy drive. drive720k (4) This is a 720 kilobyte, 3.5 inch floppy drive. drive1440k (5) This is a 1.44 megabyte, 3.5 inch floppy drive. drive120mb(6) This is a 120 megabyte, 3.5 inch floptical drive.

OBJECT-TYPE

A text description of the hardware location, on complex multi SBB hardware only, for the floppy disk. A NULL string indicates that the hardware location could not be determined or is irrelevant.

OBJECT-IDENTITY

OBJECT-TYPE

A table of ST-506 interface accessible fixed disk descriptions.

OBJECT-TYPE

A fixed disk description.

OBJECT-TYPE

An index that uniquely specifies this entry. Each possible index value indicates a specific drive as shown in the table below: fixedDiskIndex IDE/ESDI Controller Drive Unit ============= =================== ========== 0 Primary 1 1 Primary 2 2 Secondary 1 3 Secondary 2 Any other index value would be implementation specific.

OBJECT-TYPE

The drive type.

OBJECT-TYPE

The number of cylinders on the drive.

OBJECT-TYPE

The number of heads on the drive.

OBJECT-TYPE

The number of sectors per track on the drive.

OBJECT-TYPE

The capacity of the drive in megabytes.

OBJECT-TYPE

A text description of the hardware location, on complex multi SBB hardware only, for the fixed disk. A NULL string indicates that the hardware location could not be determined or is irrelevant.

OBJECT-IDENTITY

OBJECT-TYPE

A list of PCI slot information entries.

OBJECT-TYPE

A description of a PCI slot.

OBJECT-TYPE

A number that uniquely identifies this device on its PCI bus. Values greater than 255 are considered dummy bus numbers for empty PCI slots. For systems supporting multiple PCI segments, the segment will be encoded into the high order word of this value (Bit16 to Bit31). If PCI segment is not supported, the high order word will be 0.

OBJECT-TYPE

A number that uniquely identifies this device on its PCI bus.

OBJECT-TYPE

The physical PCI slot number of this device. Embedded devices will return 0 for this variable.

OBJECT-TYPE

Uniquely identifies the board configured in this slot. A zero length ID indicates the Subsystem ID is not supported and the (Device ID/Vendor ID) should be used for identification purposes. An ID of all 0xFFh indicates an empty slot.

OBJECT-TYPE

The product name (or other suitable description) of this PCI board. This field may be empty if no descriptive information is known about the board.

OBJECT-TYPE

The maximum data width supported by this PCI slot.

OBJECT-TYPE

The maximum speed supported by this PCI slot.

OBJECT-TYPE

The PCI Extended Slot Information. This is a set of flags indicating extended features for the PCI slot. Each bit has the following meaning when it is set (1): Bit 0: Extended SCSI PCI Slot Bit 1: PCI-X capable Bits 2-31: reserved (set to 0) NOTE: bit 31 is the most significant bit, bit 0 is the least significant.

OBJECT-TYPE

The type of PCI the slot. This indicates the capability of the slot, not the currently operating mode.

OBJECT-TYPE

The current operating mode of PCI/PCI-X slot. This indicates the current operating mode of the device in the slot. If the slot is empty, this value would be unknown.

OBJECT-TYPE

The maximum speed in megahertz supported by this PCI slot. If the slot also supports PCI-X, this value indicates the maximum speed of the slot when a non-PCI-X adapter is used. An entry of 0 indicates the speed is unknown.

OBJECT-TYPE

The maximum speed in megahertz supported by this PCI-X slot. An entry of 0 indicates the speed is unknown. An entry of -1 indicates the slot does not support PCI-X.

OBJECT-TYPE

The current speed in megahertz of the adapter in this PCI or PCI-X slot. An entry of 0 indicates the speed is could not be determined or the slot is empty.

OBJECT-TYPE

A text description of the hardware location, on complex multi SBB hardware only, for the Peripheral Component Interconnect (PCI) bus. A NULL string indicates that the hardware location could not be determined or is irrelevant.

OBJECT-TYPE

Index for the I/O Chassis in cpqSePCISlotIOCTablePtr where this PCI slot is physically located.

OBJECT-TYPE

This represents header type byte of a PCI device

OBJECT-TYPE

This OID indicates whether PCI slot 0 is embedded in the machine or not.

OBJECT-TYPE

This is the maximum link speed for the PCIe slot. An entry of 0 indicates the maximum link speed could not be determined or the slot is not PCIe. The unit is Mb/s.

OBJECT-TYPE

This is the maximum link for the PCIe slot. Value N means N lanes. An entry of 0 indicates the maximum link width could not be determined or the slot is not PCIe.

OBJECT-TYPE

A list of PCI function information entries.

OBJECT-TYPE

A description of the functions in each PCI slot.

OBJECT-TYPE

The PCI bus number for this device function. For systems supporting multiple PCI segments, the segment will be encoded into the high order word of this value (Bit16 to Bit31). If PCI segment is not supported, the high order word will be 0.

OBJECT-TYPE

The device index for this function.

OBJECT-TYPE

The unique index that specifies this function.

OBJECT-TYPE

The class code register as defined in the PCI Local Bus Specification in the following format: Octet Register ----- -------- 1 Programming Interface 2 Sub-class code 3 Base class code

OBJECT-TYPE

A text string which describes the PCI Base Class and Sub Class to which this device belongs. This field may empty if no descriptive information is known about this function's class.

OBJECT-TYPE

This variable identifies this particular device. This identifier is allocated by the component manufacturer.

OBJECT-TYPE

This variable identifies the component manufacturer. Valid identifiers are assigned by the PCI SIG.

OBJECT-TYPE

This variable is a vendor defined extension to the device ID and specifies a device specific revision identifier.

OBJECT-TYPE

This variable specifies which input of the system interrupt controller(s) the device's interrupt pin is connected to. A value of 0ffh means unknown or no connection.

OBJECT-TYPE

The status of the device described by this function. Some PCI devices, such as embedded devices, have the potential of being present but disabled.

OBJECT-TYPE

A text description of the hardware location, on complex multi SBB hardware only, for the Peripheral Component Interconnect (PCI) bus. A NULL string indicates that the hardware location could not be determined or is irrelevant.

OBJECT-TYPE

This is the negotiated link speed for the PCIe link of the PCI device. An entry of 0 indicates the negotiated link speed could not be determined or the device is not PCIe. The unit is Mb/s.

OBJECT-TYPE

This is the negotiated link width for the PCIe link of the device. Value N means N lanes. An entry of 0 indicates the negotiated link width could not be determined or the device is not PCIe.

OBJECT-TYPE

This is the maximum link speed for the PCIe device. An entry of 0 indicates the maximum link speed could not be determined or the device is not PCIe. The unit is Mb/s.

OBJECT-TYPE

This is the maximum link width for the PCIe device. Value N means N lanes. An entry of 0 indicates the maximum link width could not be determined or the device is not PCIe.

OBJECT-TYPE

A list of PCI base memory entries

OBJECT-TYPE

A description of the base memory usage in each function

OBJECT-TYPE

The PCI bus number for this memory entry. For systems supporting multiple PCI segments, the segment will be encoded into the high order word of this value (Bit16 to Bit31). If PCI segment is not supported, the high order word will be 0.

OBJECT-TYPE

The device index for this memory entry

OBJECT-TYPE

The unique index that specifies the function associated with this memory entry.

OBJECT-TYPE

The unique index that specifies this memory entry.

OBJECT-TYPE

Base address of this memory usage entry.

OBJECT-TYPE

The type of memory this entry describes. This variable is used to determine if this memory entry maps into memory, expansion rom or I/O space.

OBJECT-TYPE

This variable specifies how much address space this function requires. A value of 0 will be returned if the agent cannot obtain this information.

OBJECT-TYPE

A text description of the hardware location, on complex multi SBB hardware only, for the Peripheral Component Interconnect (PCI) bus. A NULL string indicates that the hardware location could not be determined or is irrelevant.

OBJECT-TYPE

The PCI segment mode of the system, if supported.

OBJECT-IDENTITY

OBJECT-TYPE

A list of PC Card slot information entries.

OBJECT-TYPE

A PC Card slot description table entry. A table entry is defined for each PC Card Slot in the current system configuration.

OBJECT-TYPE

Defines the logical PC Card slot number for this PC Card Slot. In addition, the slot number serves as the index into the PC Card data table. Typical index ranges will be either 1 to 4 (for 4 slots) or 1 to 2 (for 2 slots). (Un)Docking may cause the supported index range to change dynamically.

OBJECT-TYPE

Defines the overall condition of the PC Card. The supported values are defined as follows: unknown(1) The current condition is unknown for the PC Card or PC Card Slot. ok(2) PC Card operations are normal. No user action required. degraded (3) PC Card operations have degraded. Consult the cpqSePCCardStatus field for recommended actions. failed (4) PC Card operations have failed. Consult the cpqSePCCardStatus field for recommended actions.

OBJECT-TYPE

Defines the user level PC Card Slot location description. Text strings supported are: - System Unit Top Slot, - System Unit Bottom Slot, - Docking Station Top Slot, - Docking Station Bottom Slot.

OBJECT-TYPE

Defines the PC Card Slot capabilities. This is a bit mapped value defined by DMI Mobile Supplement for the System Slots Group, Slot Type. Bits of interest for PC Card support are: Bit 6 - PCMCIA slot (if set), Bit 13 - 16 bit PC Card capable (if set), Bit 14 - CardBus PC Card capable (if set), Bit 15 - ZV Port capable (if set), Bit 16 - Modem Ring Resume capable (if set), All other bits should be zero (reset) for PC Card slots.

OBJECT-TYPE

Defines the maximum bus width for this PC Card Slot. The supported values are defined as follows: Other (1) Value is not in defined list. Unknown (2) Actual value is not known. width 8 bit (3) Bus is 8 bits wide. width 16 bit (4) Bus is 16 bits wide. width 32 bit (5) Bus is 32 bits wide. width 64 bit (6) Bus is 64 bits wide. width 128 bit (7) Bus is 128 bits wide.

OBJECT-TYPE

Defines the maximum thermal dissipation capacity (milliwatts) for this PC Card Slot. A value of zero indicates the thermal capacity is unknown. A non-zero value indicates the thermal capacity in milliwatts.

OBJECT-TYPE

Defines the Thermal Sensor ID that monitors this PC Card Slot. A value of zero indicates that a sensor is not present or unknown for this slot. A non-zero value indicates the sensor ID as defined by the platform firmware.

OBJECT-TYPE

Defines the current power state (On/Off) for this PC Card Slot. The supported values are defined as follows: unknown (1) Current power state is unknown. on (2) Power is currently on. off (3) Power is currently off.

OBJECT-TYPE

Defines the operating status for the card in this PC Card Slot. The supported values are defined as follows: unknown (1) The current status is not known for the PC Card or PC Card Slot. ok (2) PC Card operations are normal. No user action required. thermalDegraded (3) PC Card operations have degraded due to unsafe thermal conditions. Recommended Actions include: Discontinue the use of the PC Card as soon as possible. If a Modem or LAN card then close all communication applications/links. If a Memory, ATA, or SCSI device then close all open/related files. Remove PC Card from slot after use is discontinued, if possible. thermalFailure (4) PC Card operations have failed due to unsafe thermal conditions. The PC Card will automatically be powered off to protect itself and the system. Recommended Actions include: Discontinue the use of the PC Card immediately. If a Modem or LAN card then close all communication applications/links. If a Memory, ATA, or SCSI device then close all open/related files. Remove PC Card from slot after use is discontinued, if possible.

OBJECT-TYPE

Defines the PC Card Manufacturer / Device information for the card in this PC Card Slot. The returned string data is read from the PC Card's onboard Card Information Structure (CIS).

OBJECT-TYPE

Defines the PC Card Model / Part Number information for the card in this PC Card Slot. The returned string data is read from the PC Card's onboard Card Information Structure (CIS).

OBJECT-TYPE

Defines the PC Card Serial Number information for the card in this PC Card Slot. The returned string data is read from the PC Card's onboard Card Information Structure (CIS).

OBJECT-TYPE

Defines the PC Card Asset Tag information for the card in this PC Card Slot. The returned string data is read from the PC Card's onboard Card Information Structure (CIS).

OBJECT-IDENTITY

OBJECT-TYPE

A table of USB built-in port descriptions containing one entry for each physical USB connector shipped on the system. Add-in USB ports are not reflected in this table.

OBJECT-TYPE

A description of a USB port.

OBJECT-TYPE

An index that uniquely specifies this entry.

OBJECT-TYPE

The port type. The supported values are defined as follows: other (1) USB/SD port data is not available. usbPort (2) The port is a USB Port. usbPort (3) The port is a SD Port.

OBJECT-TYPE

A text description of the hardware location, on complex multi SBB hardware only, for the USB port. A NULL string indicates that the hardware location could not be determined or is irrelevant.

OBJECT-TYPE

The port status. The supported values are defined as follows: other (1) USB/SD port is not available. notPopulated (2) The port is a USB/SD Port is not populated. populated (3) The port is a USB/SD Port is populated.

OBJECT-TYPE

A text description of the USB/SD port device name. A NULL string indicates that the device name could not be determined or is irrelevant.

OBJECT-TYPE

The capacity of the USB/SD device in megabytes. Value 0 indicates the device capacity could not be determined.

OBJECT-TYPE

A text description of the USB/SD port device Manufacturer/Vendor name. A NULL string indicates that the Manufacturer/Vendor name could not be determined or is irrelevant.

OBJECT-TYPE

A text description of the USB/SD port device Model name. A NULL string indicates that the Model name could not be determined or is irrelevant.

OBJECT-TYPE

USB/SD Device Firmware Version. A NULL string indicates that the USB/SD Device Firmware Version could not be determined or is irrelevant.

OBJECT-TYPE

USB/SD device Serial Number. A NULL string indicates that the Serial Number could not be determined or is irrelevant.

OBJECT-TYPE

A text description of the USB/SD device hardware part number.

OBJECT-TYPE

The number of flash media devices attached to this USB port.

OBJECT-TYPE

An array of octets corresponding to the number of Read Errors on each flash media device attached to this USB Port.

OBJECT-TYPE

An array of octets corresponding to the number of Write Errors on each flash media device attached to this USB Port.

OBJECT-TYPE

An array of octets corresponding to the Read Threshold on each flash media device attached to this USB Port.

OBJECT-TYPE

An array of octets corresponding to the Write Threshold on each flash media device attached to this USB Port.

OBJECT-TYPE

The USB/SD Device status. The supported values are defined as follows: other (1) USB/SD device status is unknown. ok (2) The USB/SD device status is OK. For the HP Dual MicroSD EM USB Kit, both SD cards are OK and in redundant config. degraded (3) The USB/SD device status is degraded. For the HP Dual MicroSD EM, one of the SD cards has failed and redundancy is lost. failed (4) The USB/SD device status is failed. For the HP Dual MicroSD EM, both SD cards have failed.

OBJECT-TYPE

The USB/SD Device advanced features. The supported values are defined as follows: none (0) -- deprecated in 10.20 USB/SD device is a standard device with no advanced features. redundancy-capable (1) The USB/SD device is Redundancy-capable. standard (2) USB/SD device is a standard device with no advanced features.

OBJECT-TYPE

Identifies the slot location of the flash media device attached to this port that failed and needs to be replaced on redundancy-capable devices. A value of -1 indicates that there is no failed flash media device attached to this port or the location could not be determined.

OBJECT-TYPE

Identifies the slot location of the flash media device attached to this port that was the last one with a read or write error detected on redundancy-capable devices. A value of -1 indicates that none of the flash media devices attached to this port have any read or write error or the location could not be determined.

OBJECT-TYPE

USB/SD Device Fault Tolerance for the HP Dual MicroSD EM USB Kit. This shows the fault tolerance mode of the HP Dual MicroSD EM USB Kit. The following values are valid for Fault Tolerance: None (2) Fault tolerance is not enabled. If read or write errors occur on the primary SD card or if it fails, the data cannot be recovered. Mirroring - RAID 1 (3) Both SD cards contain identical data. If read or write errors occur on one SD card or if it fails, the data can be retrieved from the mirror SD card.

OBJECT-TYPE

An array of octets corresponding to a value indicating the physical presence of the flash media device. A value of zero (0) indicates the flash media for the specified slot is absent. A value of one (1) indicates the flash media for the specified slot is present.

OBJECT-IDENTITY

OBJECT-TYPE

A list of cells in the partition.

OBJECT-TYPE

A description of a cell in the system.

OBJECT-TYPE

This is a number that uniquely specifies the cell.

OBJECT-TYPE

This value represents the cabinet that the cell belongs to.

OBJECT-TYPE

This value is cell/slot number that is unique across the cabinet.

OBJECT-TYPE

Table index for the I/O chassis which is connected to this cell.

OBJECT-TYPE

HP SAL Revision

OBJECT-TYPE

This is the revision of system firmware on the cell board

OBJECT-TYPE

This value indicates whether the cell is active.

OBJECT-TYPE

This bitmap represents the state of cell to scan bus connection/RIO cable state. if bit 6 is set to 1, Cable port swapped. if bit 5 is set to 1, Cable ID mismatched. if bit 4 is set to 1, Output Cable parity error. if bit 3 is set to 1, Output Cable detached. if bit 2 is set to 1, Input Cable parity error. if bit 1 is set to 1, Input Cable detached. if bit 0 is set to 1, Connection valid.

OBJECT-TYPE

This value indicates whether the cell has core I/O attached to it.

OBJECT-TYPE

This value represents the speed of the cell board/FSB ratio

OBJECT-TYPE

This value represents whether there is a cell in the slot

OBJECT-TYPE

This value represents whether the cell has power

OBJECT-TYPE

This value represents whether the cell is ready for reconfiguration

OBJECT-TYPE

This value represents total memory in the cell

OBJECT-TYPE

This value represents state of the cell LED. This is a bit-mapped value defined as follows. Bit 31..30 = 00, LED 3 is Off = 01, LED 3 is On = 10, LED 3 is Blinking = 11, For LED 3 future use Bit 29..27 = 000, LED 3 is Red = 001, LED 3 is Yellow = 010, LED 3 is Green = 011, LED 3 is Blue = 100, For LED 3 future use = 101, For LED 3 future use = 110, For LED 3 future use = 111, For LED 3 future use Bit 26..24 = 000, LED 3 indicates Power = 001, LED 3 indicates Run = 010, LED 3 indicates Attention = 011, LED 3 indicates Fault = 100, For LED 3 future use = 101, For LED 3 future use = 110, For LED 3 future use = 111, For LED 3 future use Bit 23..22 = 00, LED 2 is Off = 01, LED 2 is On = 10, LED 2 is Blinking = 11, For LED 2 future use Bit 21..19 = 000, LED 2 is Red = 001, LED 2 is Yellow = 010, LED 2 is Green = 011, LED 2 is Blue = 100, For LED 2 future use = 101, For LED 2 future use = 110, For LED 2 future use = 111, For LED 2 future use Bit 18..16 = 000, LED 2 indicates Power = 001, LED 2 indicates Run = 010, LED 2 indicates Attention = 011, LED 2 indicates Fault = 100, For LED 2 future use = 101, For LED 2 future use = 110, For LED 2 future use = 111, For LED 2 future use Bit 15..14 = 00, LED 1 is Off = 01, LED 1 is On = 10, LED 1 is Blinking = 11, For LED 1 future use Bit 13..11 = 000, LED 1 is Red = 001, LED 1 is Yellow = 010, LED 1 is Green = 011, LED 1 is Blue = 100, For LED 1 future use = 101, For LED 1 future use = 110, For LED 1 future use = 111, For LED 1 future use Bit 10..8 = 000, LED 1 indicates Power = 001, LED 1 indicates Run = 010, LED 1 indicates Attention = 011, LED 1 indicates Fault = 100, For LED 1 future use = 101, For LED 1 future use = 110, For LED 1 future use = 111, For LED 1 future use Bit 7..6 = 00, LED 0 is Off = 01, LED 0 is On = 10, LED 0 is Blinking = 11, For LED 0 future use Bit 5..3 = 000, LED 0 is Red = 001, LED 0 is Yellow = 010, LED 0 is Green = 011, LED 0 is Blue = 100, For LED 0 future use = 101, For LED 0 future use = 110, For LED 0 future use = 111, For LED 0 future use Bit 2..0 = 000, LED 0 indicates Power = 001, LED 0 indicates Run = 010, LED 0 indicates Attention = 011, LED 0 indicates Fault = 100, For LED 0 future use = 101, For LED 0 future use = 110, For LED 0 future use = 111, For LED 0 future use

OBJECT-TYPE

This value represents state of the cell

OBJECT-TYPE

The requested percentage of CLM memory to be configured in the cell.

OBJECT-TYPE

The size of requested CLM memory in the cell in kilobytes.

OBJECT-TYPE

The size of allocated CLM memory in the cell in kilobytes.

OBJECT-TYPE

The size of allocated interleaved memory in the cell in kilobytes.

OBJECT-TYPE

When set indicates that there is an interleaved memory configured in the cell.

OBJECT-TYPE

This is the cell board serial number.

OBJECT-TYPE

The CLM (Cell Local Memory) settings condition of this cell.

OBJECT-IDENTITY

OBJECT-TYPE

A list of I/O chassis in the partition.

OBJECT-TYPE

A description of an I/O chassis in the system.

OBJECT-TYPE

This is a number that uniquely specifies the I/O chassis.

OBJECT-TYPE

This value represents the cabinet that the I/O chassis belongs to. The default value is 255 if the cabinet number can not be obtained.

OBJECT-TYPE

This value indicates the bay in the cabinet where the I/O chassis resides.

OBJECT-TYPE

This is the I/O chassis number that is unique across the bay.

OBJECT-TYPE

This value indicates I/O chassis power state.

OBJECT-TYPE

This value represents the state of a IO Chassis LED. This is a bit-mapped value defined as follows. Bit 31..30 = 00, LED 3 is Off = 01, LED 3 is On = 10, LED 3 is Blinking = 11, For LED 3 future use Bit 29..27 = 000, LED 3 is Red = 001, LED 3 is Yellow = 010, LED 3 is Green = 011, LED 3 is Blue = 100, For LED 3 future use = 101, For LED 3 future use = 110, For LED 3 future use = 111, For LED 3 future use Bit 26..24 = 000, LED 3 indicates Power = 001, LED 3 indicates Run = 010, LED 3 indicates Attention = 011, LED 3 indicates Fault = 100, For LED 3 future use = 101, For LED 3 future use = 110, For LED 3 future use = 111, For LED 3 future use Bit 23..22 = 00, LED 2 is Off = 01, LED 2 is On = 10, LED 2 is Blinking = 11, For LED 2 future use Bit 21..19 = 000, LED 2 is Red = 001, LED 2 is Yellow = 010, LED 2 is Green = 011, LED 2 is Blue = 100, For LED 2 future use = 101, For LED 2 future use = 110, For LED 2 future use = 111, For LED 2 future use Bit 18..16 = 000, LED 2 indicates Power = 001, LED 2 indicates Run = 010, LED 2 indicates Attention = 011, LED 2 indicates Fault = 100, For LED 2 future use = 101, For LED 2 future use = 110, For LED 2 future use = 111, For LED 2 future use Bit 15..14 = 00, LED 1 is Off = 01, LED 1 is On = 10, LED 1 is Blinking = 11, For LED 1 future use Bit 13..11 = 000, LED 1 is Red = 001, LED 1 is Yellow = 010, LED 1 is Green = 011, LED 1 is Blue = 100, For LED 1 future use = 101, For LED 1 future use = 110, For LED 1 future use = 111, For LED 1 future use Bit 10..8 = 000, LED 1 indicates Power = 001, LED 1 indicates Run = 010, LED 1 indicates Attention = 011, LED 1 indicates Fault = 100, For LED 1 future use = 101, For LED 1 future use = 110, For LED 1 future use = 111, For LED 1 future use Bit 7..6 = 00, LED 0 is Off = 01, LED 0 is On = 10, LED 0 is Blinking = 11, For LED 0 future use Bit 5..3 = 000, LED 0 is Red = 001, LED 0 is Yellow = 010, LED 0 is Green = 011, LED 0 is Blue = 100, For LED 0 future use = 101, For LED 0 future use = 110, For LED 0 future use = 111, For LED 0 future use Bit 2..0 = 000, LED 0 indicates Power = 001, LED 0 indicates Run = 010, LED 0 indicates Attention = 011, LED 0 indicates Fault = 100, For LED 0 future use = 101, For LED 0 future use = 110, For LED 0 future use = 111, For LED 0 future use

OBJECT-IDENTITY

OBJECT-TYPE

This is the number of logical CPUs in the partition. Zero will be returned if the value can not be determined.

OBJECT-TYPE

This is the number of available cell slots in the partition. Zero will be returned if the value can not be determined.

OBJECT-TYPE

This is the number of installed cells in the partition. Zero will be returned if the value can not be determined.

OBJECT-TYPE

This denotes the number of powered on cells in the partition. Zero will be returned if the value can not be determined.

OBJECT-TYPE

This represents the cells that are ready for reconfiguration. Zero will be returned if the value can not be determined.

OBJECT-TYPE

This represents memory interleaving type for the partition. Zero will be returned if the value can not be determined.

OBJECT-TYPE

This represents the partition name.

OBJECT-TYPE

The cell slot number of the partition's core cell.

OBJECT-TYPE

The cabinet number of the partition's core cell.

OBJECT-TYPE

The requested percentage of CLM memory to be configured in the partition.

OBJECT-TYPE

The size of requested CLM memory in the partition in kilobytes.

OBJECT-TYPE

The size of allocated CLM memory in the partition in kilobytes.

OBJECT-TYPE

The size of allocated interleaved memory in the partition in kilobytes.

OBJECT-TYPE

When set, it indicates that there is an interleaved memory configured in the partition.

OBJECT-TYPE

This represents the logical partition number of the current partition in the complex.

OBJECT-IDENTITY

OBJECT-TYPE

A list of cabinets that contain cells in the partition.

OBJECT-TYPE

A description of a cabinet in the system.

OBJECT-TYPE

This is a number that uniquely specifies the cabinet.

OBJECT-TYPE

This value represents the on/off state of compute cabinet LED.

OBJECT-TYPE

This value represents the on/off state of IOX cabinet LED.

OBJECT-TYPE

This value represents type and number of a compute or IOX cabinet. Bit 31..16 = 0x0000, type of cabinet is Thin Boy Bit 31..16 = 0x0001, type of cabinet is Fat Boy Bit 31..16 = 0x0002, type of cabinet is Dome Lite Bit 31..16 = 0x0003, type of cabinet is Key Stone Bit 31..16 = 0x0004, type of cabinet is Matter Horn Bit 31..16 = 0x0080, type of cabinet is IOX Bit 15..0, represents the compute cabinet number.

OBJECT-TYPE

This value represents the state of a cabinet LED. This is a bit-mapped value defined as follows. Bit 31..30 = 00, LED 3 is Off = 01, LED 3 is On = 10, LED 3 is Blinking = 11, For LED 3 future use Bit 29..27 = 000, LED 3 is Red = 001, LED 3 is Yellow = 010, LED 3 is Green = 011, LED 3 is Blue = 100, For LED 3 future use = 101, For LED 3 future use = 110, For LED 3 future use = 111, For LED 3 future use Bit 26..24 = 000, LED 3 indicates Power = 001, LED 3 indicates Run = 010, LED 3 indicates Attention = 011, LED 3 indicates Fault = 100, For LED 3 future use = 101, For LED 3 future use = 110, For LED 3 future use = 111, For LED 3 future use Bit 23..22 = 00, LED 2 is Off = 01, LED 2 is On = 10, LED 2 is Blinking = 11, For LED 2 future use Bit 21..19 = 000, LED 2 is Red = 001, LED 2 is Yellow = 010, LED 2 is Green = 011, LED 2 is Blue = 100, For LED 2 future use = 101, For LED 2 future use = 110, For LED 2 future use = 111, For LED 2 future use Bit 18..16 = 000, LED 2 indicates Power = 001, LED 2 indicates Run = 010, LED 2 indicates Attention = 011, LED 2 indicates Fault = 100, For LED 2 future use = 101, For LED 2 future use = 110, For LED 2 future use = 111, For LED 2 future use Bit 15..14 = 00, LED 1 is Off = 01, LED 1 is On = 10, LED 1 is Blinking = 11, For LED 1 future use Bit 13..11 = 000, LED 1 is Red = 001, LED 1 is Yellow = 010, LED 1 is Green = 011, LED 1 is Blue = 100, For LED 1 future use = 101, For LED 1 future use = 110, For LED 1 future use = 111, For LED 1 future use Bit 10..8 = 000, LED 1 indicates Power = 001, LED 1 indicates Run = 010, LED 1 indicates Attention = 011, LED 1 indicates Fault = 100, For LED 1 future use = 101, For LED 1 future use = 110, For LED 1 future use = 111, For LED 1 future use Bit 7..6 = 00, LED 0 is Off = 01, LED 0 is On = 10, LED 0 is Blinking = 11, For LED 0 future use Bit 5..3 = 000, LED 0 is Red = 001, LED 0 is Yellow = 010, LED 0 is Green = 011, LED 0 is Blue = 100, For LED 0 future use = 101, For LED 0 future use = 110, For LED 0 future use = 111, For LED 0 future use Bit 2..0 = 000, LED 0 indicates Power = 001, LED 0 indicates Run = 010, LED 0 indicates Attention = 011, LED 0 indicates Fault = 100, For LED 0 future use = 101, For LED 0 future use = 110, For LED 0 future use = 111, For LED 0 future use

OBJECT-IDENTITY

OBJECT-TYPE

This is the complex UUID.

OBJECT-TYPE

This is the total number of cabinets in the complex. Zero will be returned if the value can not be determined.

OBJECT-TYPE

This is the number of compute cabinets in the complex.

OBJECT-TYPE

This denotes the number of IOX cabinets in the complex.

OBJECT-TYPE

This represents the complex name.

OBJECT-TYPE

Bit 31 - Indicates that there is a locked IPMI property when set. Bit 7:0 - Contains the property number currently locked.

OBJECT-TYPE

A table of cell slot status in a complex.

OBJECT-TYPE

A cell slot status description.

OBJECT-TYPE

The table index of cell slot status in a complex. This value is a unique index for a row in the table of complex cell slot status.

OBJECT-TYPE

The cabinet number of this cell slot.

OBJECT-TYPE

The number of this cell slot.

OBJECT-TYPE

The status of this cell slot.

OBJECT-TYPE

The partition number this cell is assigned.

OBJECT-TYPE

The partition this cell belongs to.

OBJECT-IDENTITY

OBJECT-TYPE

A list of LEDs in the system.

OBJECT-TYPE

An entry of an LED in the system.

OBJECT-TYPE

This is a number that uniquely identifies the LED.

OBJECT-TYPE

This value represents the state of an LED. Bit 31..24 = ON-duration time in unit of 0.1 sec Bit 23..16 = OFF-duration time in unit of 0.1 sec Bit 15..8 = 0, LED state is OFF = 1, LED state is ON = 2, LED state is BLINKING Bit 7..0 = 0, invalid color value = 1, LED color is Brown = 2, LED color is Red = 3, LED color is Orange = 4, LED color is Yellow = 5, LED color is Green = 6, LED color is Blue = 7, LED color is Violet = 8, LED color is Gray = 9, LED color is White

OBJECT-TYPE

This is the duration of an LED state in seconds.

OBJECT-TYPE

This value indicates whether an LED is internal or external. 0 = External 1 = Internal

OBJECT-TYPE

Description of the LED entry.

OBJECT-TYPE

Description of the location of an LED entry.

OBJECT-IDENTITY

OBJECT-TYPE

Attached USB device type.

OBJECT-TYPE

Attached USB device name.

OBJECT-IDENTITY

OBJECT-TYPE

A table of PCIe disk descriptions.

OBJECT-TYPE

A PCIe disk table entry.

OBJECT-TYPE

The PCI bus number for this disk's controller.

OBJECT-TYPE

The PCI device number for this disk's controller.

OBJECT-TYPE

The PCI function number for this disk's controller.

OBJECT-TYPE

A text description of the disk model. A NULL string indicates that the disk model could not be determined or is irrelevant.

OBJECT-TYPE

The firmware version of the disk.

OBJECT-TYPE

The serial number of the disk.

OBJECT-TYPE

The size of the disk in MB (Megabytes).

OBJECT-TYPE

The condition of the disk.

OBJECT-TYPE

The current temperature of the disk in degrees Celsius.

OBJECT-TYPE

The upper critical threshold temperature of the disk in degrees Celsius.

OBJECT-TYPE

A text description of the hardware location of the disk itself. A NULL string indicates that the hardware location could not be determined or is irrelevant.

OBJECT-TYPE

PCIe Physical Drive OS Name. The OS name for this PCIe physical drive. This field will be a null (size 0) string if the agent does not support OS name.

OBJECT-TYPE

Wear Status of a PCIe Disk. This shows the wear status of the solid state PCIe physical drive. The following values are valid for the physical drive solid state wear status: Other (1) The instrument agent is unable to determine the physical drives solid state disk wear status. This value would be used for non SSD drives or SSD drives that do not support wear reporting. Ok (2) Indicates the solid state disk is not in any imminent danger of wear out. Fifty Six Day Threshold Passed (3) Indicates that based upon the current workload, the solid state disk will reach the maximum usage limit for writes (wear out) within fifty-six days. You should modify your write workload or begin preparing to replace your SSD drive. Five Percent Threshold Passed (4) Indicates that the solid state disk has passed the five percent threshold and is at or below five percent of reaching the maximum usage limit for writes (wear out). You should begin to prepare to replace your SSD drive. Two Percent Threshold Passed (5) Indicates that the solid state disk has passed the two percent threshold and is at or below two percent of reaching the maximum usage limit for writes (wear out). You should begin to prepare to replace your SSD drive. SSD Wear Out(6) Indicates that a solid state drive is approaching the maximum usage limit for writes (wear out) and should be replaced as soon as possible.

OBJECT-TYPE

PCIe Disk Power On Hours. This is the total number of hours that the PCIe disk has been powered on. This value will be 4,294,967,295 if the disk power on hours cannot be determined or is not supported.

OBJECT-TYPE

PCIe Drive Percent Endurance Used. This value specifies the hundredths of the percentage disk life used. The value of this field is allowed to exceed 100%. As an example, if the value reported is 50, this would indicate .50 percent endurance used. This value will be 4,294,967,295 if the percent endurance used cannot be determined or is not supported.

OBJECT-TYPE

The overall condition of PCIe Disk table.