CPQSM2-MIB
- Registered at
- 1.3.6.1.4.1.232.9
- Namespace
- hp
- Source file
CPQSM2-MIB- Digest
sha256:545738b2478043b7549696646eb2baabd46642216f759451c74dde54a8a12c91
Imports
| From | Symbols |
|---|---|
| CPQHOST-MIB | compaq, cpqHoGUIDCanonical, cpqHoTrapFlags |
| CPQSINFO-MIB | cpqSiAssetTag, cpqSiProductName, cpqSiSysProductId, cpqSiSysSerialNum |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-MIB | sysName |
| SNMPv2-SMI | Counter32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CPQHOST-MIB CPQSINFO-MIB CPQSM2-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| cpqSm2 OBJECT-IDENTITY | 1.3.6.1.4.1.232.9 | |||
| cpqSm2MibRev OBJECT-IDENTITY | 1.3.6.1.4.1.232.9.1 | |||
| cpqSm2MibRevMajor OBJECT-TYPE The Major Revision level of the MIB. A change in the major revision level represents a major change in the architecture of the MIB. A change in the major revision level may indicate a significant change in the information supported and/or the meaning of the supported information. Correct interpretation of data may require a MIB document with the same major revision level. | 1.3.6.1.4.1.232.9.1.1 | INTEGER (1..65535) | read-only | mandatory |
| cpqSm2MibRevMinor OBJECT-TYPE The Minor Revision level of the MIB. A change in the minor revision level may represent some minor additional support, no changes to any pre-existing information has occurred. | 1.3.6.1.4.1.232.9.1.2 | INTEGER (0..65535) | read-only | mandatory |
| cpqSm2MibCondition OBJECT-TYPE Remote Insight/ Integrated Lights-Out condition. This represents the overall condition of the Remote Insight/ Integrated Lights-Out. | 1.3.6.1.4.1.232.9.1.3 | INTEGER {other(1), ok(2), degraded(3), failed(4)} | read-only | mandatory |
| cpqSm2Component OBJECT-IDENTITY | 1.3.6.1.4.1.232.9.2 | |||
| cpqSm2Interface OBJECT-IDENTITY | 1.3.6.1.4.1.232.9.2.1 | |||
| cpqSm2OsCommon OBJECT-IDENTITY | 1.3.6.1.4.1.232.9.2.1.4 | |||
| cpqSm2OsCommonPollFreq OBJECT-TYPE The Insight Agent`s polling frequency. The frequency, in seconds, at which the Insight Agent requests information from the device driver. A frequency of zero (0) indicates that the Insight Agent retrieves the information upon request of a management station, it does not poll the device driver at a specific interval. If the poll frequency is zero (0) all attempts to write to this object will fail. If the poll frequency is non-zero, setting this value will change the polling frequency of the Insight Agent. Setting the poll frequency to zero (0) will always fail. An agent may choose to fail any request to change the poll frequency to a value that would severely impact system performance. | 1.3.6.1.4.1.232.9.2.1.4.1 | INTEGER (0..65535) | read-write | mandatory |
| cpqSm2OsCommonModuleTable OBJECT-TYPE A table of software modules that provide an interface to the device this MIB describes. | 1.3.6.1.4.1.232.9.2.1.4.2 | not-accessible | deprecated | |
| cpqSm2OsCommonModuleEntry OBJECT-TYPE A description of a software module that provides an interface to the device this MIB describes. | 1.3.6.1.4.1.232.9.2.1.4.2.1 | not-accessible | deprecated | |
| cpqSm2OsCommonModuleIndex OBJECT-TYPE A unique index for this module description. | 1.3.6.1.4.1.232.9.2.1.4.2.1.1 | INTEGER (0..255) | read-only | deprecated |
| cpqSm2OsCommonModuleName OBJECT-TYPE The module name. | 1.3.6.1.4.1.232.9.2.1.4.2.1.2 | DisplayString (SIZE(0..255)) | read-only | deprecated |
| cpqSm2OsCommonModuleVersion OBJECT-TYPE The module version in XX.YY format. Where XX is the major version number and YY is the minor version number. This field will be null (size 0) string if the agent cannot provide the module version. | 1.3.6.1.4.1.232.9.2.1.4.2.1.3 | DisplayString (SIZE(0..5)) | read-only | deprecated |
| cpqSm2OsCommonModuleDate OBJECT-TYPE The module date. field octets contents range ===== ====== ======= ===== 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minute 0..59 6 7 second 0..60 (use 60 for leap-second) This field will be set to year = 0 if the agent cannot provide the module date. The hour, minute, and second field will be set to zero (0) if they are not relevant. The year field is set with the most significant octet first. | 1.3.6.1.4.1.232.9.2.1.4.2.1.4 | OCTET STRING (SIZE(7)) | read-only | deprecated |
| cpqSm2OsCommonModulePurpose OBJECT-TYPE The purpose of the module described in this entry. | 1.3.6.1.4.1.232.9.2.1.4.2.1.5 | DisplayString (SIZE(0..255)) | read-only | deprecated |
| cpqSm2Cntlr OBJECT-IDENTITY | 1.3.6.1.4.1.232.9.2.2 | |||
| cpqSm2CntlrRomDate OBJECT-TYPE Remote Insight/ Integrated Lights-Out ROM Date. The firmware date format is mm/dd/yyyy format. | 1.3.6.1.4.1.232.9.2.2.1 | DisplayString (SIZE(0..10)) | read-only | mandatory |
| cpqSm2CntlrRomRevision OBJECT-TYPE Remote Insight/ Integrated Lights-Out ROM Revision. The revision of the firmware on the Remote Insight/ Integrated Lights-Out. | 1.3.6.1.4.1.232.9.2.2.2 | DisplayString (SIZE(0..5)) | read-only | mandatory |
| cpqSm2CntlrVideoStatus OBJECT-TYPE Remote Insight/ Integrated Lights-Out Video Hardware Status. The following values are defined: other(1) The Insight Agent is unable to determine the status of the Remote Insight/ Integrated Lights-Out video. enabled(2) The Remote Insight/ Integrated Lights-Out video is enabled. disabled(3) The Remote Insight/ Integrated Lights-Out video is disabled. | 1.3.6.1.4.1.232.9.2.2.3 | INTEGER {other(1), enabled(2), disabled(3)} | read-only | mandatory |
| cpqSm2CntlrBatteryEnabled OBJECT-TYPE Remote Insight Battery Enabled. The following values are defined: other(1) The Insight Agent is unable to determine the status of the Remote Insight battery. enabled(2) The Remote Insight battery is present and is enabled. disabled(3) The Remote Insight battery is present and is disabled. noBattery(4) This Remote Insight model does not use a battery. | 1.3.6.1.4.1.232.9.2.2.4 | INTEGER {other(1), enabled(2), disabled(3), noBattery(4)} | read-write | mandatory |
| cpqSm2CntlrBatteryStatus OBJECT-TYPE Remote Insight Battery Status. The following values are defined: other(1) The Insight Agent is unable to determine if the battery needs replacement. batteryOk(2) The Remote Insight battery is OK. batteryFailed(3) The Remote Insight battery needs replacement. batteryDisconnected(4) The Remote Insight battery is disconnected. | 1.3.6.1.4.1.232.9.2.2.5 | INTEGER {other(1), batteryOk(2), batteryFailed(3), batteryDisconnected(4)} | read-only | mandatory |
| cpqSm2CntlrBatteryPercentCharged OBJECT-TYPE Remote Insight Battery Percent Charged. The Remote Insight battery recharge level. | 1.3.6.1.4.1.232.9.2.2.6 | INTEGER (0..100) | read-only | mandatory |
| cpqSm2CntlrAlertStatus OBJECT-TYPE Remote Insight/ Integrated Lights-Out Alerting Status. The following values are defined: other(1) The Insight Agent is unable to determine the status of Remote Insight alerting. enabled(2) Remote Insight/ Integrated Lights-Out alerting is enabled. disabled(3) Remote Insight/ Integrated Lights-Out alerting is disabled. | 1.3.6.1.4.1.232.9.2.2.7 | INTEGER {other(1), enabled(2), disabled(3)} | read-write | mandatory |
| cpqSm2CntlrPendingAlerts OBJECT-TYPE Pending Remote Insight/ Integrated Lights-Out alerts. The following values are defined: other(1) The Insight Agent is unable to determine the state of Remote Insight pending alerts. noAlertsPending(2) No Remote Insight/ Integrated Lights-Out alerts are pending. All alerts have been delivered. alertsPending(3) Remote Insight/ Integrated Lights-Out alerts are pending. There are alerts remaining to be sent. clearPendingAlerts(4) This value is set to clear any Remote Insight/ Integrated Lights-Out alerts that have not been sent. | 1.3.6.1.4.1.232.9.2.2.8 | INTEGER {other(1), noAlertsPending(2), alertsPending(3), clearPendingAlerts(4)} | read-write | mandatory |
| cpqSm2CntlrSelfTestErrors OBJECT-TYPE Remote Insight/ Integrated Lights-Out Self Test Errors. This is a collection of post error flags. Each bit has the following meaning when it is on (1): Bit 31: RESERVED Bit 30: RESERVED Bit 29: CPLD - PAL5 error. Bit 28: CPLD - PAL4 error. Bit 27: CPLD - PAL3 error. Bit 26: CPLD - PAL2 error. Bit 25: CPLD - PAL1 error. Bit 24: CPLD - PAL0 error. Bit 23: Power Management Controller error. Bit 22: RESERVED Bit 21: Supported Host error. Bit 20: Host ROM error. Bit 19: Infrastructure error. Bit 18: Thread Initialization error. Bit 17: Boot Block error. Bit 16: I2C error. Bit 15: EEPROM error. Bit 14: SRAM error. Bit 13: Embedded Flash/SD-CARD. Bit 12: RESERVED Bit 11: NIC Error Bit 10: RESERVED Bit 9: RESERVED Bit 8: NVRAM write / read / verify error. Bit 7: NVRAM Interface error. Bit 6: RESERVED Bit 5: RESERVED Bit 4: Serial Port UART error. Bit 3: Misc Cryptography error. Bit 2: Web Server cryptography error. Bit 1: Memory Test error. Bit 0: Cryptographic Hardware error. NOTE: bit 31 is the most significant bit, bit 0 is the least significant. A value of 0 means no errors have occurred. | 1.3.6.1.4.1.232.9.2.2.9 | INTEGER | read-only | mandatory |
| cpqSm2CntlrAgentLocation OBJECT-TYPE Remote Insight/ Integrated Lights-Out Agent Location. The following values are defined: hostOsAgent(1) The Remote Insight/ Integrated Lights-Out MIB information is provided by the host OS agents. firmwareAgent(2) The Remote Insight/ Integrated Lights-Out MIB information is provided by the EISA Remote Insight/ Integrated Lights-Out firmware. remoteInsightPciFirmwareAgent(3) The Remote Insight/ Integrated Lights-Out MIB information is provided by the PCI Remote Insight/ Integrated Lights-Out firmware. enclosureFirmwareAgent(4) The Remote Insight/ Integrated Lights-Out MIB information is provided by a rack enclosure firmware agent. | 1.3.6.1.4.1.232.9.2.2.10 | INTEGER {hostOsAgent(1), firmwareAgent(2), remoteInsightPciFirmwareAgent(3), enclosureFirmwareAgent(4)} | read-only | mandatory |
| cpqSm2CntlrLastDataUpdate OBJECT-TYPE The date and time that the Remote Insight/ Integrated Lights-Out offline data was last updated. field octets contents range ===== ====== ======= ===== 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minute 0..59 6 7 second 0..60 (use 60 for leap-second) This field will be set to year = 0 if the agent cannot provide the date and time. The hour, minute, and second field will be set to zero (0) if they are not relevant. The year field is set with the most significant octet first. | 1.3.6.1.4.1.232.9.2.2.11 | OCTET STRING (SIZE(7)) | read-only | deprecated |
| cpqSm2CntlrDataStatus OBJECT-TYPE Remote Insight/ Integrated Lights-Out Host OS Data Status. The following values are defined: other(1) The Insight Agent is unable to determine the status of the host OS data. noData(2) There is no data available for the host system OS. onlineData(3) Data is available from the host OS Insight Agent. offlineData(4) A backup copy of data is available from the Remote Insight/ Integrated Lights-Out firmware agent. | 1.3.6.1.4.1.232.9.2.2.12 | INTEGER {other(1), noData(2), onlineData(3), offlineData(4)} | read-only | mandatory |
| cpqSm2CntlrColdReboot OBJECT-TYPE Remote Insight/ Integrated Lights-Out Server Cold Reboot The following values are defined: notAvailable(1) Cold reboot of the system is not available. available(2) Cold reboot of the system is available. doColdReboot(3) This value is set to cause a cold reboot of the system. | 1.3.6.1.4.1.232.9.2.2.13 | INTEGER {notAvailable(1), available(2), doColdReboot(3)} | read-write | mandatory |
| cpqSm2CntlrBadLoginAttemptsThresh OBJECT-TYPE Maximum Unauthorized Login Attempts Threshold. This is the threshold for consecutive unsuccessful login attempts. When this threshold is exceeded, a trap is sent. | 1.3.6.1.4.1.232.9.2.2.14 | INTEGER | read-only | mandatory |
| cpqSm2CntlrBoardSerialNumber OBJECT-TYPE Remote Insight/ Integrated Lights-Out Serial Number. The Serial Number of this Remote Insight/ Integrated Lights-Out. | 1.3.6.1.4.1.232.9.2.2.15 | DisplayString (SIZE(0..40)) | read-only | mandatory |
| cpqSm2CntlrRemoteSessionStatus OBJECT-TYPE Remote Insight/ Integrated Lights-Out Session Status. The following values are defined: other(1) The Insight Agent is unable to determine the status of a Remote Insight session. active(2) A Remote Insight/ Integrated Lights-Out session is active. inactive(3) There is no active Remote Insight/ Integrated Lights-Out session. | 1.3.6.1.4.1.232.9.2.2.16 | INTEGER {other(1), active(2), inactive(3)} | read-only | mandatory |
| cpqSm2CntlrInterfaceStatus OBJECT-TYPE Remote Insight/ Integrated Lights-Out Interface Status. The following values are defined: other(1) The Insight Agent is unable to determine the status of the Remote Insight/ Integrated Lights-Out interface. ok(2) The Remote Insight/ Integrated Lights-Out firmware is responding to commands. notResponding(3) The Remote Insight/ Integrated Lights-Out firmware is not responding to commands. | 1.3.6.1.4.1.232.9.2.2.17 | INTEGER {other(1), ok(2), notResponding(3)} | read-only | mandatory |
| cpqSm2CntlrSystemId OBJECT-TYPE Remote Insight/ Integrated Lights-Out System ID. A number used to identify this system in Remote Insight/ Integrated Lights-Out pager alerts. | 1.3.6.1.4.1.232.9.2.2.18 | DisplayString (SIZE(0..9)) | read-write | mandatory |
| cpqSm2CntlrKeyboardCableStatus OBJECT-TYPE Remote Insight Keyboard Cable Status. The following values are defined: other(1) The Insight Agent is unable to determine if the keyboard cable is connected to the Remote Insight. connected(2) The keyboard cable is connected to the Remote Insight. disconnected(3) The keyboard cable is not connected to the Remote Insight. | 1.3.6.1.4.1.232.9.2.2.19 | INTEGER {other(1), connected(2), disconnected(3)} | read-only | mandatory |
| cpqSm2ServerIpAddress OBJECT-TYPE The IP address for this servers connection to the Remote Insight/ Integrated Lights-Out. This address is used to communicate remotely to the host server via the Remote Insight/ Integrated Lights-Out. | 1.3.6.1.4.1.232.9.2.2.20 | IpAddress | read-only | mandatory |
| cpqSm2CntlrModel OBJECT-TYPE Remote Insight/ Integrated Lights-Out Model. The following values are defined: other(1) The Insight Agent is unable to determine the model of the Remote Insight/ Integrated Lights-Out. eisaRemoteInsightBoard(2) This is the EISA Remote Insight. pciRemoteInsightBoard(3) This is the PCI Remote Insight. pciLightsOutRemoteInsightBoard(4) This is the Remote Insight Lights-Out Edition. pciIntegratedLightsOutRemoteInsight(5) This is Integrated Remote Insight Lights-Out Edition. pciLightsOutRemoteInsightBoardII(6) This is the Remote Insight Lights-Out Edition version II. pciIntegratedLightsOutRemoteInsight2(7) This is the Integrated Lights-Out 2 Edition. pciLightsOut100series(8) This is the Lights-Out 100 Edition for 100 Series of ProLiant servers. pciIntegratedLightsOutRemoteInsight3(9) This is the Integrated Lights-Out 3 Edition. pciIntegratedLightsOutRemoteInsight4(10) This is the Integrated Lights-Out 4 Edition. pciIntegratedLightsOutRemoteInsight5(11) This is the Integrated Lights-Out 5 Edition. | 1.3.6.1.4.1.232.9.2.2.21 | INTEGER {other(1), eisaRemoteInsightBoard(2), pciRemoteInsightBoard(3), pciLightsOutRemoteInsightBoard(4), pciIntegratedLightsOutRemoteInsight(5), pciLightsOutRemoteInsightBoardII(6), pciIntegratedLightsOutRemoteInsight2(7), pciLightsOut100series(8), pciIntegratedLightsOutRemoteInsight3(9), pciIntegratedLightsOutRemoteInsight4(10), pciIntegratedLightsOutRemoteInsight5(11)} | read-only | mandatory |
| cpqSm2CntlrSelfTestErrorMask OBJECT-TYPE Remote Insight/ Integrated Lights-Out Self Test Error Mask. Each bit in this mask corresponds to a bit in the MIB variable cpqSm2CntlrSelfTestErrors. If the mask bit is a 1, then the corresponding bit in cpqSm2CntlrSelfTestErrors is relevant to the particular version of the Remote Insight/ Integrated Lights-Out. This variable is necessary since the different versions of the Remote Insight/ Integrated Lights-Out hardware have different subsets of tests that are performed. | 1.3.6.1.4.1.232.9.2.2.22 | INTEGER | read-only | mandatory |
| cpqSm2CntlrMouseCableStatus OBJECT-TYPE Remote Insight Mouse Cable Status. The following values are defined: other(1) The Insight Agent is unable to determine if the mouse cable is connected to the Remote Insight. connected(2) The mouse cable is connected to the Remote Insight. disconnected(3) The mouse cable is not connected to the Remote Insight. | 1.3.6.1.4.1.232.9.2.2.23 | INTEGER {other(1), connected(2), disconnected(3)} | read-only | mandatory |
| cpqSm2CntlrVirtualPowerCableStatus OBJECT-TYPE Remote Insight Virtual Power Cable Status. The following values are defined: other(1) The Insight Agent is unable to determine if the virtual power cable is connected to the Remote Insight. connected(2) The virtual power cable is connected to the Remote Insight. disconnected(3) The virtual power cable is not connected to the Remote Insight. notApplicable(4) Not Applicable. | 1.3.6.1.4.1.232.9.2.2.24 | INTEGER {other(1), connected(2), disconnected(3), notApplicable(4)} | read-only | mandatory |
| cpqSm2CntlrExternalPowerCableStatus OBJECT-TYPE Remote Insight External Power Cable Status. The following values are defined: other(1) The Insight Agent is unable to determine if the External or Internal power cable connections to the Remote Insight. externallyConnected(2) Just External power cable is connected to the Remote Insight. disconnected(3) Both External and Internal power cables are disconnected from the Remote Insight. internallyConnected(4) Just Internal power cable is connected to the Remote Insight. externallyAndInternallyConnected(5) Both External and Internal power cables are connected to the Remote Insight. notApplicable(6) Not Applicable. | 1.3.6.1.4.1.232.9.2.2.25 | INTEGER {other(1), externallyConnected(2), disconnected(3), internallyConnected(4), externallyAndInternallyConnected(5), notApplicable(6)} | read-only | mandatory |
| cpqSm2CntlrHostGUID OBJECT-TYPE The globally unique identifier of this server. This variable can by used by management stations to correlate the Remote Insight/ Integrated Lights-Out controller to the server containing the controller. This variable is identical to the variable `cpqHoGUID` which is returned from the CPQHOST.MIB. | 1.3.6.1.4.1.232.9.2.2.26 | OCTET STRING (SIZE(16)) | read-only | mandatory |
| cpqSm2CntlriLOSecurityOverrideSwitchState OBJECT-TYPE Integrated Lights-Out Security Override Switch State. The following values are defined: notSupported(1) The iLO Security Override Switch state is not supported on this model of Integrated Lights-Out. set(2) The iLO Security Override Switch is set, which implies security is disabled. notSet(3) The iLO Security Override Switch is not set, which implies normal secure operation. | 1.3.6.1.4.1.232.9.2.2.27 | INTEGER {notSupported(1), set(2), notSet(3)} | read-only | mandatory |
| cpqSm2CntlrHardwareVer OBJECT-TYPE Hardware Version of Remote Insight/ Integrated Lights-Out. | 1.3.6.1.4.1.232.9.2.2.28 | INTEGER | read-only | mandatory |
| cpqSm2CntlrAction OBJECT-TYPE Remote Insight/ Integrated Lights-Out Action Flags. This is a collection of flags used to indicate the various options available. ResetSupportBit: If bit-0 is set to 1, the option is available. If bit-0 is set to 0, the option is NOT available. iLOAlerts If bit-1 is set to 1, iLO alerts are enabled. If bit-2 is set to 1, iLO alerts are disabled. These two bits should never have the same value. HostAlerts If bit-3 is set to 1, Host alerts are enabled. If bit-4 is set to 1, Host alerts are disabled. These two bits should never have the same value. Bit-31 is used to execute the set operation. NOTE: bit 31 is the most significant bit, bit 0 is the least significant. Status This is a collection of flags. Each bit has the following meaning when it is on (1): Bit 0: Reset Supported Bit 1: iLO Alerts Enabled Bit 2: iLO Alerts Disabled Bit 3: Host Alerts Enabled Bit 4: Host Alerts Disabled Bit 5-30: RESERVED Bit 31: Execute Set | 1.3.6.1.4.1.232.9.2.2.29 | INTEGER | read-write | mandatory |
| cpqSm2CntlrLicenseActive OBJECT-TYPE Remote Insight License State. The following values are defined: none(1) The Insight Agent is unable to determine the active license or no license is installed. iloAdvanced(2) iLO Advanced license is installed. iloLight(3) iLO Light license is installed. iloAdvancedBlade(4) iLO Advanced for Bladesystem license is installed. iloStandard(5) iLO Standard for HP BladeSystem license is installed. iloEssentials(6) iLO Essentials license is installed. iloScaleOut(7) iLO Scale Out license is installed. iloAdvancedPremiumSecurity(8) iLO Advanced Premium Security Edition installed. | 1.3.6.1.4.1.232.9.2.2.30 | INTEGER {none(1), iloAdvanced(2), iloLight(3), iloAdvancedBlade(4), iloStandard(5), iloEssentials(6), iloScaleOut(7), iloAdvancedPremiumSecurity(8)} | read-only | mandatory |
| cpqSm2CntlrLicenseKey OBJECT-TYPE iLO Active ASCII License key string. On implicitly licensed systems like blades, a license will be indicated as installed, although the key value may be blank | 1.3.6.1.4.1.232.9.2.2.31 | DisplayString (SIZE(32)) | read-only | mandatory |
| cpqSm2CntlrServerPowerState OBJECT-TYPE The current power state for the server. The power cap reach state indicates there was an attempt to power on, but the server could not reserve enough power. | 1.3.6.1.4.1.232.9.2.2.32 | INTEGER {unknown(1), poweredOff(2), poweredOn(3), insufficientPowerOrPowerOnDenied(4)} | read-only | mandatory |
| cpqSm2CntlrSysAutoShutdownCause OBJECT-TYPE Indicate the reason for triggering system auto shutdown or cancelling auto shutdown. | 1.3.6.1.4.1.232.9.2.2.33 | INTEGER {fanFailure(1), overheatCondition(2), vrmFailure(3), powerSupplyFailure(4), systemRunningOnBatteryBackupUnit(5), aborted(129), fanFailureAborted(130), overheatAborted(131), vrmFailureAborted(132), softPowerDown(133), softwareAutomaticServerRecovery(134), powerSupplyFailureAborted(135)} | read-only | mandatory |
| cpqSm2CntlrSecurityState OBJECT-TYPE Indicate security state | 1.3.6.1.4.1.232.9.2.2.34 | INTEGER {factory(1), wipe(2), production(3), highSecurity(4), fips(5), cnsa(6)} | read-only | mandatory |
| cpqSm2WDTimerType OBJECT-TYPE Indicate the watchdog timer type. | 1.3.6.1.4.1.232.9.2.2.35 | INTEGER {unknown(1), ipmi(2)} | read-only | mandatory |
| cpqSm2WDTimerTimeoutDetails OBJECT-TYPE Indicate the watchdog timer timeout action and timer details. | 1.3.6.1.4.1.232.9.2.2.36 | DisplayString (SIZE(128)) | read-only | mandatory |
| cpqSm2CntlrOverallSecStatus OBJECT-TYPE The field indicates the overall security status. | 1.3.6.1.4.1.232.9.2.2.37 | INTEGER {Ok(1), Risk(2), Ignored(3)} | read-only | mandatory |
| cpqSm2EventLog OBJECT-IDENTITY | 1.3.6.1.4.1.232.9.2.3 | |||
| cpqSm2EventTotalEntries OBJECT-TYPE The number of entries in the Remote Insight/ Integrated Lights-Out event log. Setting the number of entries to 0 clears the Remote Insight/ Integrated Lights-Out event log. Setting the number of entries to something other than 0 will always fail. | 1.3.6.1.4.1.232.9.2.3.1 | INTEGER | read-write | mandatory |
| cpqSm2EventLogTable OBJECT-TYPE A table of event log descriptions. | 1.3.6.1.4.1.232.9.2.3.2 | not-accessible | mandatory | |
| cpqSm2EventLogEntry OBJECT-TYPE An event log description. | 1.3.6.1.4.1.232.9.2.3.2.1 | not-accessible | mandatory | |
| cpqSm2EventLogIndex OBJECT-TYPE An index that uniquely specifies this entry. | 1.3.6.1.4.1.232.9.2.3.2.1.1 | INTEGER | read-only | mandatory |
| cpqSm2EventLogNumber OBJECT-TYPE A number assigned by the Remote Insight/ Integrated Lights-Out firmware. | 1.3.6.1.4.1.232.9.2.3.2.1.2 | INTEGER | read-only | mandatory |
| cpqSm2EventLogDate OBJECT-TYPE The time and date for this event log entry. field octets contents range ===== ====== ======= ===== 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minute 0..59 6 7 second 0..60 (use 60 for leap-second) This field will be set to year = 0 if the agent cannot provide the time and date. The hour, minute, and second field will be set to zero (0) if they are not relevant. The year field is set with the most significant octet first. | 1.3.6.1.4.1.232.9.2.3.2.1.3 | OCTET STRING (SIZE(7)) | read-only | mandatory |
| cpqSm2EventLogMessage OBJECT-TYPE The message text for this event log entry. | 1.3.6.1.4.1.232.9.2.3.2.1.4 | DisplayString (SIZE(0..100)) | read-only | mandatory |
| cpqSm2AsyncComm OBJECT-IDENTITY | 1.3.6.1.4.1.232.9.2.4 | |||
| cpqSm2CommSettingsTable OBJECT-TYPE The list of communication settings for the Remote Insight. | 1.3.6.1.4.1.232.9.2.4.1 | not-accessible | mandatory | |
| cpqSm2CommSettingsEntry OBJECT-TYPE A defined port`s communication settings for the Remote Insight. | 1.3.6.1.4.1.232.9.2.4.1.1 | not-accessible | mandatory | |
| cpqSm2CommPort OBJECT-TYPE Remote Insight Communications Port. The following values are defined: internal(1) This is the Remote Insight internal modem port. auxiliary(2) This is the Remote Insight auxiliary port. | 1.3.6.1.4.1.232.9.2.4.1.1.1 | INTEGER {internal(1), auxiliary(2)} | read-only | mandatory |
| cpqSm2CommType OBJECT-TYPE Remote Insight Communications Type. The following values are defined: other(1) The Insight Agent is unable to determine the communications type. none(2) There is nothing configured on this port. modem(3) A modem is configured on this port. nulModem(4) A Null Modem cable is configured on this port. This type of connection is only supported on the Remote Insight auxiliary port. xonXoff(5) An XON/XOFF 3-wire interface is configured on this port. This type of connection is only supported on the Remote Insight auxiliary port. | 1.3.6.1.4.1.232.9.2.4.1.1.2 | INTEGER {other(1), none(2), modem(3), nulModemCable(4), xonXoff(5)} | read-only | mandatory |
| cpqSm2CommBaudRate OBJECT-TYPE The baud rate to be used over this communication medium by the Remote Insight. | 1.3.6.1.4.1.232.9.2.4.1.1.3 | INTEGER | read-only | mandatory |
| cpqSm2CommParity OBJECT-TYPE Remote Insight Communications Parity. The following values are defined: other(1) The Insight Agent is unable to determine the parity setting. none(2) This port is set for no parity. odd(3) This port is set for odd parity. even(4) This port is set for even parity. | 1.3.6.1.4.1.232.9.2.4.1.1.4 | INTEGER {other(1), none(2), odd(3), even(4)} | read-only | mandatory |
| cpqSm2CommDataBits OBJECT-TYPE Remote Insight Communications Data Bits. The following values are defined: other(1) The Insight Agent is unable to determine the data bits setting. sevenBit(2) This port is set for seven data bits. eight(3) This port is set for eight data bits. | 1.3.6.1.4.1.232.9.2.4.1.1.5 | INTEGER {other(1), sevenBits(2), eightBits(3)} | read-only | mandatory |
| cpqSm2CommStopBits OBJECT-TYPE Remote Insight Communications Stop Bits. The following values are defined: other(1) The Insight Agent is unable to determine the stop bits setting. oneBit(2) This port is set for one stop data bit. twoBits(3) This port is set for two stop bits. | 1.3.6.1.4.1.232.9.2.4.1.1.6 | INTEGER {other(1), oneBit(2), twoBits(3)} | read-only | mandatory |
| cpqSm2CommModemReset OBJECT-TYPE The string that is sent to reset the modem. | 1.3.6.1.4.1.232.9.2.4.1.1.7 | DisplayString (SIZE(0..42)) | read-only | mandatory |
| cpqSm2CommModemInit OBJECT-TYPE The string that is sent to initialize the modem. | 1.3.6.1.4.1.232.9.2.4.1.1.8 | DisplayString (SIZE(0..42)) | read-only | mandatory |
| cpqSm2CommModemDialPrefix OBJECT-TYPE The string that is prepended to phone numbers before dialing. | 1.3.6.1.4.1.232.9.2.4.1.1.9 | DisplayString (SIZE(0..42)) | read-only | mandatory |
| cpqSm2CommPortInit OBJECT-TYPE The string that is sent to the auxiliary port before the modem is reset. | 1.3.6.1.4.1.232.9.2.4.1.1.10 | DisplayString (SIZE(0..42)) | read-only | mandatory |
| cpqSm2CommDialin OBJECT-TYPE Comm Dial-in. The following values are defined: other(1) The Insight Agent is unable to determine the status of dialin. enabled(2) Dialing in to this modem is enabled. disabled(3) Dialing in to this modem is disabled. | 1.3.6.1.4.1.232.9.2.4.1.1.11 | INTEGER {other(1), enabled(2), disabled(3)} | read-only | mandatory |
| cpqSm2CommDialbackRequired OBJECT-TYPE Remote Insight Dialback Required. The following values are defined: other(1) The Insight Agent is unable to determine the dialback required setting. required(2) Dialback is required for all users. notRequired(3) Dialback is not required. It is optional on a per user basis. | 1.3.6.1.4.1.232.9.2.4.1.1.12 | INTEGER {other(1), required(2), notRequired(3)} | read-only | mandatory |
| cpqSm2CommNonPppConnections OBJECT-TYPE Non-PPP connections. The following values are defined: other(1) The Insight Agent is unable to determine the status of the non-PPP connections variable. enabled(2) Non-PPP connections are allowed on this port. disabled(3) Non-PPP connections are not allowed on this port. Only PPP sessions are accepted. | 1.3.6.1.4.1.232.9.2.4.1.1.13 | INTEGER {other(1), enabled(2), disabled(3)} | read-only | mandatory |
| cpqSm2CommSnmpTrapDelivery OBJECT-TYPE SNMP Trap Delivery. The following values are defined: other(1) The Insight Agent is unable to determine the status of SNMP Trap delivery. enabled(2) SNMP trap delivery is enabled. The Remote Insight firmware will use this port to deliver SNMP traps. disabled(3) SNMP Trap delivery is disabled. The Remote Insight firmware will not use this port to deliver SNMP traps. | 1.3.6.1.4.1.232.9.2.4.1.1.14 | INTEGER {other(1), enabled(2), disabled(3)} | read-only | mandatory |
| cpqSm2CommPageDelivery OBJECT-TYPE Page Delivery. The following values are defined: other(1) The Insight Agent is unable to determine the status of page delivery. enabled(2) Page delivery is enabled. The Remote Insight firmware will use this port to deliver pages. disabled(3) Page delivery is disabled. The Remote Insight firmware will not use this port to deliver pages. | 1.3.6.1.4.1.232.9.2.4.1.1.15 | INTEGER {other(1), enabled(2), disabled(3)} | read-only | mandatory |
| cpqSm2CommPagerBaudRate OBJECT-TYPE The baud rate to be used for pager communications over this medium by the Remote Insight. | 1.3.6.1.4.1.232.9.2.4.1.1.16 | INTEGER | read-only | mandatory |
| cpqSm2CommPagerParity OBJECT-TYPE Remote Insight Communications Pager Parity. The following values are defined: other(1) The Insight Agent is unable to determine the pager parity setting. none(2) This port is set for no parity when paging. odd(3) This port is set for odd parity when paging. even(4) This port is set for even parity when paging. | 1.3.6.1.4.1.232.9.2.4.1.1.17 | INTEGER {other(1), none(2), odd(3), even(4)} | read-only | mandatory |
| cpqSm2CommPagerDataBits OBJECT-TYPE Remote Insight Communications Pager Data Bits. The following values are defined: other(1) The Insight Agent is unable to determine the data bits setting. sevenBit(2) This port is set for seven data bits when paging. eight(3) This port is set for eight data bits when paging. | 1.3.6.1.4.1.232.9.2.4.1.1.18 | INTEGER {other(1), sevenBits(2), eightBits(3)} | read-only | mandatory |
| cpqSm2CommPagerStopBits OBJECT-TYPE Remote Insight Communications Pager Stop Bits. The following values are defined: other(1) The Insight Agent is unable to determine the stop bits setting. oneBit(2) This port is set for one stop data bit when paging. twoBits(3) This port is set for two stop bits when paging. | 1.3.6.1.4.1.232.9.2.4.1.1.19 | INTEGER {other(1), oneBit(2), twoBits(3)} | read-only | mandatory |
| cpqSm2CommPcmciaModel OBJECT-TYPE Remote Insight Network PCMCIA Card Model. This is a NULL terminated ASCII string. If the agent cannot determine the model name, it should return a NULL string. | 1.3.6.1.4.1.232.9.2.4.1.1.20 | DisplayString (SIZE(0..80)) | read-only | mandatory |
| cpqSm2Nic OBJECT-IDENTITY | 1.3.6.1.4.1.232.9.2.5 | |||
| cpqSm2NicConfigTable OBJECT-TYPE The list of network interface configuration settings for the Remote Insight/ Integrated Lights-Out. | 1.3.6.1.4.1.232.9.2.5.1 | not-accessible | mandatory | |
| cpqSm2NicConfigEntry OBJECT-TYPE A defined nic`s configuration settings for the Remote Insight/ Integrated Lights-Out. | 1.3.6.1.4.1.232.9.2.5.1.1 | not-accessible | mandatory | |
| cpqSm2NicLocation OBJECT-TYPE Location of the Network Interface Controller associated with the Remote Insight/ Integrated Lights-Out. The following values are defined: other(1) The Insight Agent is unable to determine type of network interface controller. embedded(2) This is an embedded network interface controller. pcmcia(3) This is a PCMCIA network interface controller. | 1.3.6.1.4.1.232.9.2.5.1.1.1 | INTEGER {other(1), embedded(2), pcmcia(3)} | read-only | mandatory |
| cpqSm2NicModel OBJECT-TYPE Remote Insight/ Integrated Lights-Out Network Interface Controller Model. This is a NULL terminated ASCII string. If the agent cannot determine the model name, it should return a NULL string. | 1.3.6.1.4.1.232.9.2.5.1.1.2 | DisplayString (SIZE(0..80)) | read-only | mandatory |
| cpqSm2NicType OBJECT-TYPE Remote Insight/ Integrated Lights-Out Network Interface Controller Type. The following values are defined: other(1) The Insight Agent is unable to determine type of network interface controller. ethernet(2) This is an ethernet network interface controller. tokenRing(3) This is a token ring network interface controller. | 1.3.6.1.4.1.232.9.2.5.1.1.3 | INTEGER {other(1), ethernet(2), tokenRing(3)} | read-only | mandatory |
| cpqSm2NicMacAddress OBJECT-TYPE The MAC Address of the Network Interface Controller associated with the Remote Insight/ Integrated Lights-Out. This is a 6 octet address in the `canonical` order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires MAC addresses to be transmitted most significant bit first. 16-bit addresses, if needed, are represented by setting their upper 4 octets to all 0`s, i.e., AAFF would be represented as 00000000AAFF. | 1.3.6.1.4.1.232.9.2.5.1.1.4 | OCTET STRING (SIZE(6)) | read-only | mandatory |
| cpqSm2NicIpAddress OBJECT-TYPE Remote Insight/ Integrated Lights-Out Network Interface Controller IP Address. The IP address for the network interface controller associated with the Remote Insight/ Integrated Lights-Out. All octets should be set to 0xff if there is not an IP address associated with the NIC. The order will be in network byte order (i.e. MSB first.) | 1.3.6.1.4.1.232.9.2.5.1.1.5 | IpAddress | read-only | mandatory |
| cpqSm2NicIpSubnetMask OBJECT-TYPE Remote Insight/ Integrated Lights-Out Network Interface Controller Subnet Mask. | 1.3.6.1.4.1.232.9.2.5.1.1.6 | IpAddress | read-only | mandatory |
| cpqSm2NicEnabledStatus OBJECT-TYPE Remote Insight/ Integrated Lights-Out Network Interface Controller Enabled Status The following values are defined: other(1) The Insight Agent is unable to determine type of network interface controller enabled status enabled(2) This network interface controller is enabled. disabled(3) This network interface controller is disabled. | 1.3.6.1.4.1.232.9.2.5.1.1.7 | INTEGER {other(1), enabled(2), disabled(3)} | read-only | mandatory |
| cpqSm2NicDuplexState OBJECT-TYPE Remote Insight/ Integrated Lights-Out Network Interface Controller Enabled Status. The following values are defined: other(1) The Insight Agent is unable to determine type of network interface controller duplex state. halfDuplex(2) This network interface controller is half duplex. fullDuplex(3) This network interface controller is full duplex. notSupported(4) This network interface controller is does not support duplex state. | 1.3.6.1.4.1.232.9.2.5.1.1.8 | INTEGER {other(1), halfDuplex(2), fullDuplex(3), notSupported(4)} | read-only | mandatory |
| cpqSm2NicSpeed OBJECT-TYPE Remote Insight/ Integrated Lights-Out Network Interface Controller Speed. The speed of the network interface controller in megabits per second. | 1.3.6.1.4.1.232.9.2.5.1.1.9 | INTEGER | read-only | mandatory |
| cpqSm2NicDhcpUse OBJECT-TYPE Remote Insight/ Integrated Lights-Out Network Interface Controller DHCP Usage The following values are defined: other(1) The Insight Agent is unable to determine if DHCP is supported for this network interface controller. enabled(2) DHCP usage is enabled for this network interface controller. disabled(3) DHCP usage is disabled for this network interface controller. | 1.3.6.1.4.1.232.9.2.5.1.1.10 | INTEGER {other(1), enabled(2), disabled(3)} | read-only | mandatory |
| cpqSm2NicCondition OBJECT-TYPE Remote Insight/ Integrated Lights-Out Network Interface Controller condition. This represents the overall condition of the Remote Insight/ Integrated Lights-Out Network Interface Controller (NIC). | 1.3.6.1.4.1.232.9.2.5.1.1.11 | INTEGER {other(1), ok(2), degraded(3), failed(4)} | read-only | mandatory |
| cpqSm2NicMtu OBJECT-TYPE Remote Insight/ Integrated Lights-Out Network Interface Maximum Transfer Unit. The maximum packet size (in bytes) of the network interface controller. | 1.3.6.1.4.1.232.9.2.5.1.1.12 | INTEGER | read-only | mandatory |
| cpqSm2NicGatewayIpAddress OBJECT-TYPE Remote Insight/ Integrated Lights-Out Network Interface Controller Default Gateway IP Address. The Default Gateway IP address for the network interface controller associated with the Remote Insight/ Integrated Lights-Out. If cpqSm2NicDhcpUse is enabled(2), this is the DHCP supplied gateway. If cpqSm2NicDhcpUse is disabled(3), this is the static gateway. The order will be in network byte order (i.e. MSB first.) | 1.3.6.1.4.1.232.9.2.5.1.1.13 | IpAddress | read-only | mandatory |
| cpqSm2NicRibFullQualDnsName OBJECT-TYPE Remote Insight/ Integrated Lights-Out Fully Qualified DNS Name. The Fully Qualified DNS Name assigned to this Remote Insight/ Integrated Lights-Out. This is composed of the DNS name and the Domain name associated with the Remote Insight/ Integrated Lights-Out. | 1.3.6.1.4.1.232.9.2.5.1.1.14 | DisplayString (SIZE(0..180)) | read-only | mandatory |
| cpqSm2NicStatsTable OBJECT-TYPE The list of network interface configuration settings for the Remote Insight/ Integrated Lights-Out. | 1.3.6.1.4.1.232.9.2.5.2 | not-accessible | mandatory | |
| cpqSm2NicStatsEntry OBJECT-TYPE A defined nic`s configuration settings for the Remote Insight/ Integrated Lights-Out. | 1.3.6.1.4.1.232.9.2.5.2.1 | not-accessible | mandatory | |
| cpqSm2NicStatsLocation OBJECT-TYPE Location of the Network Interface Controller associated with the Remote Insight/ Integrated Lights-Out. The following values are defined: other(1) The Insight Agent is unable to determine type of network interface controller. embedded(2) This is an embedded network interface controller. pcmcia(3) This is a PCMCIA network interface controller. | 1.3.6.1.4.1.232.9.2.5.2.1.1 | INTEGER {other(1), embedded(2), pcmcia(3)} | read-only | mandatory |
| cpqSm2NicXmitBytes OBJECT-TYPE Remote Insight/ Integrated Lights-Out Network Interface Controller Bytes Transmitted. | 1.3.6.1.4.1.232.9.2.5.2.1.2 | Counter | read-only | mandatory |
| cpqSm2NicXmitTotalPackets OBJECT-TYPE Remote Insight/ Integrated Lights-Out Network Interface Controller Total Transmit Packets. | 1.3.6.1.4.1.232.9.2.5.2.1.3 | Counter | read-only | mandatory |
| cpqSm2NicXmitUnicastPackets OBJECT-TYPE Remote Insight/ Integrated Lights-Out Network Interface Controller Unicast Transmit Packets. | 1.3.6.1.4.1.232.9.2.5.2.1.4 | Counter | read-only | mandatory |
| cpqSm2NicXmitNonUniPackets OBJECT-TYPE Remote Insight/ Integrated Lights-Out Network Interface Controller Non-Unicast Transmit Packets. | 1.3.6.1.4.1.232.9.2.5.2.1.5 | Counter | read-only | mandatory |
| cpqSm2NicXmitDiscardPackets OBJECT-TYPE Remote Insight/ Integrated Lights-Out Network Interface Controller Total Transmit Discarded Packets. | 1.3.6.1.4.1.232.9.2.5.2.1.6 | Counter | read-only | mandatory |
| cpqSm2NicXmitErrorPackets OBJECT-TYPE Remote Insight/ Integrated Lights-Out Network Interface Controller Total Error Transmit Packets. | 1.3.6.1.4.1.232.9.2.5.2.1.7 | Counter | read-only | mandatory |
| cpqSm2NicXmitQueueLength OBJECT-TYPE Remote Insight/ Integrated Lights-Out Network Interface Controller Number of Outstanding Packets in Transmit Queue. | 1.3.6.1.4.1.232.9.2.5.2.1.8 | Counter | read-only | mandatory |
| cpqSm2NicRecvBytes OBJECT-TYPE Remote Insight/ Integrated Lights-Out Network Interface Controller Bytes Received. | 1.3.6.1.4.1.232.9.2.5.2.1.9 | Counter | read-only | mandatory |
| cpqSm2NicRecvTotalPackets OBJECT-TYPE Remote Insight/ Integrated Lights-Out Network Interface Controller Total Receive Packets. | 1.3.6.1.4.1.232.9.2.5.2.1.10 | Counter | read-only | mandatory |
| cpqSm2NicRecvUnicastPackets OBJECT-TYPE Remote Insight/ Integrated Lights-Out Network Interface Controller Unicast Receive Packets. | 1.3.6.1.4.1.232.9.2.5.2.1.11 | Counter | read-only | mandatory |
| cpqSm2NicRecvNonUniPackets OBJECT-TYPE Remote Insight/ Integrated Lights-Out Network Interface Controller Non-Unicast Receive Packets. | 1.3.6.1.4.1.232.9.2.5.2.1.12 | Counter | read-only | mandatory |
| cpqSm2NicRecvDiscardPackets OBJECT-TYPE Remote Insight/ Integrated Lights-Out Network Interface Controller Total Receive Discarded Packets. | 1.3.6.1.4.1.232.9.2.5.2.1.13 | Counter | read-only | mandatory |
| cpqSm2NicRecvErrorPackets OBJECT-TYPE Remote Insight/ Integrated Lights-Out Network Interface Controller Total Receive Error Packets. | 1.3.6.1.4.1.232.9.2.5.2.1.14 | Counter | read-only | mandatory |
| cpqSm2NicRecvUnknownPackets OBJECT-TYPE Remote Insight/ Integrated Lights-Out Network Interface Controller Number of Unknown Protocol Packets. | 1.3.6.1.4.1.232.9.2.5.2.1.15 | Counter | read-only | mandatory |
| cpqSm2NicIpv6 OBJECT-IDENTITY | 1.3.6.1.4.1.232.9.2.5.3 | |||
| cpqSm2NicIpv6Gateway OBJECT-TYPE This value specifies the IPv6 gateway address. | 1.3.6.1.4.1.232.9.2.5.3.1 | DisplayString | read-only | mandatory |
| cpqSm2NicIpv6AddressTable OBJECT-TYPE A table of IPv6 Manual Address information. | 1.3.6.1.4.1.232.9.2.5.3.2 | not-accessible | mandatory | |
| cpqSm2NicIpv6AddressEntry OBJECT-TYPE A defined nic`s IPv6 static address configuration settings for the Remote Insight/ Integrated Lights-Out. | 1.3.6.1.4.1.232.9.2.5.3.2.1 | not-accessible | mandatory | |
| cpqSm2NicIpv6Index OBJECT-TYPE An index that uniquely specifies this entry. | 1.3.6.1.4.1.232.9.2.5.3.2.1.1 | INTEGER | read-only | mandatory |
| cpqSm2NicIpv6Address OBJECT-TYPE Remote Insight/ Integrated Lights-Out Network Interface Controller IPv6 Address with the CIDR(Classless Inter-Domain Routing) notation that the logical adapter presents to the network. | 1.3.6.1.4.1.232.9.2.5.3.2.1.2 | DisplayString | read-only | mandatory |
| cpqSm2NicIpv6Status OBJECT-TYPE Remote Insight/ Integrated Lights-Out Network Interface Controller IPv6 Address Status. | 1.3.6.1.4.1.232.9.2.5.3.2.1.3 | DisplayString | read-only | mandatory |
| cpqSm2NicIpv6PrefixLen OBJECT-TYPE Remote Insight/ Integrated Lights-Out Network Interface Prefix specifies a subnet with a range of IP addresses. | 1.3.6.1.4.1.232.9.2.5.3.2.1.4 | INTEGER | read-only | mandatory |
| cpqSm2NicIpv6DhcpTable OBJECT-TYPE A table of IPv6 Dhcp Address information. | 1.3.6.1.4.1.232.9.2.5.3.3 | not-accessible | mandatory | |
| cpqSm2NicIpv6DhcpEntry OBJECT-TYPE A defined nic`s IPv6 DHCP configuration settings for the Remote Insight/ Integrated Lights-Out. | 1.3.6.1.4.1.232.9.2.5.3.3.1 | not-accessible | mandatory | |
| cpqSm2NicIpv6DhcpIndex OBJECT-TYPE An index that uniquely specifies this entry. | 1.3.6.1.4.1.232.9.2.5.3.3.1.1 | INTEGER | read-only | mandatory |
| cpqSm2NicIpv6Dhcp OBJECT-TYPE Remote Insight/ Integrated Lights-Out Network Interface Controller IPv6 Address with the CIDR(Classless Inter-Domain Routing) notation that the logical adapter presents to the network. | 1.3.6.1.4.1.232.9.2.5.3.3.1.2 | DisplayString | read-only | mandatory |
| cpqSm2NicIpv6DhcpStatus OBJECT-TYPE Remote Insight/ Integrated Lights-Out Network Interface Controller IPv6 Dhcp Status. | 1.3.6.1.4.1.232.9.2.5.3.3.1.3 | DisplayString | read-only | mandatory |
| cpqSm2NicIpv6DhcpPrefixLen OBJECT-TYPE Remote Insight/ Integrated Lights-Out Network Interface Prefix specifies a subnet with a range of IP addresses. | 1.3.6.1.4.1.232.9.2.5.3.3.1.4 | INTEGER | read-only | mandatory |
| cpqSm2NicIpv6SlaacTable OBJECT-TYPE A table of IPv6 Slaac Address information. | 1.3.6.1.4.1.232.9.2.5.3.4 | not-accessible | mandatory | |
| cpqSm2NicIpv6SlaacEntry OBJECT-TYPE A defined nic`s IPv6 Slaac address configuration settings for the Remote Insight/ Integrated Lights-Out. | 1.3.6.1.4.1.232.9.2.5.3.4.1 | not-accessible | mandatory | |
| cpqSm2NicIpv6SlaacIndex OBJECT-TYPE An index that uniquely specifies this entry. | 1.3.6.1.4.1.232.9.2.5.3.4.1.1 | INTEGER | read-only | mandatory |
| cpqSm2NicIpv6Slaac OBJECT-TYPE Remote Insight/ Integrated Lights-Out Network Interface Controller IPv6 Slaac Address with the CIDR(Classless Inter-Domain Routing) notation that the logical adapter presents to the network. | 1.3.6.1.4.1.232.9.2.5.3.4.1.2 | DisplayString | read-only | mandatory |
| cpqsm2NicIpv6SlaacStatus OBJECT-TYPE Remote Insight/ Integrated Lights-Out Network Interface Controller IPv6 Slaac Status. | 1.3.6.1.4.1.232.9.2.5.3.4.1.3 | DisplayString | read-only | mandatory |
| cpqSm2NicIpv6SlaacPrefixLen OBJECT-TYPE Remote Insight/ Integrated Lights-Out Network Interface Prefix specifies a subnet with a range of IP addresses. | 1.3.6.1.4.1.232.9.2.5.3.4.1.4 | INTEGER | read-only | mandatory |
| cpqSm2NicIpv6RouteTable OBJECT-TYPE A table of IPv6 Route Address information. | 1.3.6.1.4.1.232.9.2.5.3.5 | not-accessible | mandatory | |
| cpqSm2NicIpv6RouteEntry OBJECT-TYPE A defined nic`s IPv6 route configuration settings for the Remote Insight/ Integrated Lights-Out. | 1.3.6.1.4.1.232.9.2.5.3.5.1 | not-accessible | mandatory | |
| cpqSm2NicIpv6RouteIndex OBJECT-TYPE An index that uniquely specifies this entry. | 1.3.6.1.4.1.232.9.2.5.3.5.1.1 | INTEGER | read-only | mandatory |
| cpqSm2NicIpv6RouteDest OBJECT-TYPE Remote Insight/ Integrated Lights-Out Network Interface Controller IPv6 route destination address with the CIDR(Classless Inter-Domain Routing) notation that the logical adapter presents to the network. | 1.3.6.1.4.1.232.9.2.5.3.5.1.2 | DisplayString | read-only | mandatory |
| cpqsm2NicIpv6RouteDestStatus OBJECT-TYPE Remote Insight/ Integrated Lights-Out Network Interface Controller IPv6 route destination Status. | 1.3.6.1.4.1.232.9.2.5.3.5.1.3 | DisplayString | read-only | mandatory |
| cpqSm2NicIpv6RouteDestPrefixLen OBJECT-TYPE Remote Insight/ Integrated Lights-Out Network Interface Route Destination Prefix specifies a subnet with a range of IP addresses. | 1.3.6.1.4.1.232.9.2.5.3.5.1.4 | INTEGER | read-only | mandatory |
| cpqSM2NicIpv6RouteGate OBJECT-TYPE Remote Insight/ Integrated Lights-Out Network Interface Controller IPv6 route gate address with the CIDR(Classless Inter-Domain Routing) notation that the logical adapter presents to the network. | 1.3.6.1.4.1.232.9.2.5.3.5.1.5 | DisplayString | read-only | mandatory |
| cpqsm2NicIpv6RouteGateStatus OBJECT-TYPE Remote Insight/ Integrated Lights-Out Network Interface Controller IPv6 route gate Status. | 1.3.6.1.4.1.232.9.2.5.3.5.1.6 | DisplayString | read-only | mandatory |
| cpqSm2Ers OBJECT-IDENTITY | 1.3.6.1.4.1.232.9.2.6 | |||
| cpqSm2ErsTransactionType OBJECT-TYPE Embedded Remote Support transaction type. The following values are defined: registration(1) Registration operation with Insight Remote Host or Insight Online Host. serviceEvent(2) Sending of service event to Insight Remote Host or Insight Online Host. l2DataCollection(3) L2 Data collection operation. unregistration(4) Unregistration with Insight Remote Host or Insight Online Host. ahsDataCollection(5) Active Health System data collection operation. | 1.3.6.1.4.1.232.9.2.6.1 | INTEGER {registration(1), serviceEvent(2), l2DataCollection(3), unregistration(4), ahsDataCollection(5)} | read-only | mandatory |
| cpqSm2ErsConnectionModel OBJECT-TYPE Embedded Remote Support connection model configured on the Remote Insight/ Integrated Lights-Out. | 1.3.6.1.4.1.232.9.2.6.2 | INTEGER {insightOnline(1), insightRemoteSupport(2)} | read-only | mandatory |
| cpqSm2ErsFailureCode OBJECT-TYPE Embedded Remote Support transaction failure code. | 1.3.6.1.4.1.232.9.2.6.3 | INTEGER {genericTransmitError(1), clientTransmitTimeout(2), clientReceiveTimeout(3), proxyConnectError(4), remoteHostConnectError(5), remoteServiceError(6)} | read-only | mandatory |
| cpqSm2ErsRemoteHost OBJECT-TYPE Remote destination server`s hostname and port as configured on the Remote Insight/ Integrated Lights-Out. Example: myremotehost.hp.com:6789 | 1.3.6.1.4.1.232.9.2.6.4 | DisplayString (SIZE(0..135)) | read-only | mandatory |
| cpqSm2FW OBJECT-IDENTITY | 1.3.6.1.4.1.232.9.2.7 | |||
| cpqSm2FirmwareType OBJECT-TYPE Indicate the firmware type supported through Integrated Lights-Out . The following values are defined: unknown(1) Unable to determine the firmware type. ilo(2) Firmware type is Integrated Lights-Out. bios(3) Firmware type is System ROM. cpld(4) Firmware type is System Programmable Logic Device. ie(5) Firmware type is Innovation Engine. sps(6) Firmware type is SPS Platform Services (SPS) Firmware. | 1.3.6.1.4.1.232.9.2.7.1 | INTEGER {unknown(1), ilo(2), bios(3), cpld(4), ie(5), sps(6)} | read-only | mandatory |
| cpqSm2FwFailureCode OBJECT-TYPE Reason for firmware upload or update failure. | 1.3.6.1.4.1.232.9.2.7.2 | DisplayString (SIZE(0..135)) | read-only | mandatory |
| cpqSm2Trap OBJECT-IDENTITY | 1.3.6.1.4.1.232.9.3 | |||
| cpqSm2Products OBJECT-IDENTITY | 1.3.6.1.4.1.232.9.4 | |||
| cpaSm2ProdEisaRemote OBJECT-IDENTITY | 1.3.6.1.4.1.232.9.4.2 | |||
| cpqSm2ProdPCIRemote OBJECT-IDENTITY | 1.3.6.1.4.1.232.9.4.3 | |||
| cpqSm2ProdRILOE OBJECT-IDENTITY | 1.3.6.1.4.1.232.9.4.4 | |||
| cpqSm2ProdiLo OBJECT-IDENTITY | 1.3.6.1.4.1.232.9.4.5 | |||
| cpqSm2ProdRILOEII OBJECT-IDENTITY | 1.3.6.1.4.1.232.9.4.6 | |||
| cpqSm2ProdRILO2 OBJECT-IDENTITY | 1.3.6.1.4.1.232.9.4.7 | |||
| cpqSm2ProdRLO100 OBJECT-IDENTITY | 1.3.6.1.4.1.232.9.4.8 | |||
| cpqSm2ProdRILO3 OBJECT-IDENTITY | 1.3.6.1.4.1.232.9.4.9 | |||
| cpqSm2ProdRILO4 OBJECT-IDENTITY | 1.3.6.1.4.1.232.9.4.10 | |||
| cpqSm2ProdRILO5 OBJECT-IDENTITY | 1.3.6.1.4.1.232.9.4.11 |
Notifications
| Name | OID | Status |
|---|---|---|
| cpqSm2ServerReset NOTIFICATION-TYPE Server Reset Detected. The Remote Insight/ Integrated Lights-Out firmware has detected a server reset. | 1.3.6.1.4.1.232.0.9001 | |
| cpqSm2ServerPowerOutage NOTIFICATION-TYPE Server Power Outage. The Remote Insight/ Integrated Lights-Out firmware has detected server power failure. | 1.3.6.1.4.1.232.0.9002 | |
| cpqSm2UnauthorizedLoginAttempts NOTIFICATION-TYPE Remote Insight/ Integrated Lights-Out Unauthorized Login Attempts. The Remote Insight/ Integrated Lights-Out firmware has detected unauthorized login attempts. | 1.3.6.1.4.1.232.0.9003 | |
| cpqSm2BatteryFailed NOTIFICATION-TYPE Remote Insight Battery Failed. The Remote Insight battery has failed and needs to be replaced. | 1.3.6.1.4.1.232.0.9004 | |
| cpqSm2SelfTestError NOTIFICATION-TYPE Remote Insight/ Integrated Lights-Out Self Test Error. The Remote Insight/ Integrated Lights-Out firmware has detected a Remote Insight self test error. | 1.3.6.1.4.1.232.0.9005 | |
| cpqSm2InterfaceError NOTIFICATION-TYPE Remote Insight/ Integrated Lights-Out Interface Error. The host OS has detected an error in the Remote Insight/ Integrated Lights-Out interface. The firmware is not responding. | 1.3.6.1.4.1.232.0.9006 | |
| cpqSm2BatteryDisconnected NOTIFICATION-TYPE Remote Insight Battery Disconnected. The Remote Insight battery cable has been disconnected. | 1.3.6.1.4.1.232.0.9007 | |
| cpqSm2KeyboardCableDisconnected NOTIFICATION-TYPE Keyboard Cable Disconnected. The Remote Insight keyboard cable has been disconnected. | 1.3.6.1.4.1.232.0.9008 | |
| cpqSm2MouseCableDisconnected NOTIFICATION-TYPE Mouse Cable Disconnected. The Remote Insight mouse cable has been disconnected. | 1.3.6.1.4.1.232.0.9009 | |
| cpqSm2ExternalPowerCableDisconnected NOTIFICATION-TYPE External Power Cable Disconnected. The Remote Insight external power cable has been disconnected. | 1.3.6.1.4.1.232.0.9010 | |
| cpqSm2LogsFull NOTIFICATION-TYPE Logs Full. The Remote Insight/ Integrated Lights-Out firmware has detected the logs are full. | 1.3.6.1.4.1.232.0.9011 | |
| cpqSm2SecurityOverrideEngaged NOTIFICATION-TYPE Security Override Engaged. The Remote Insight/ Integrated Lights-Out firmware has detected the security override jumper has been toggled to the engaged position. | 1.3.6.1.4.1.232.0.9012 | |
| cpqSm2SecurityOverrideDisengaged NOTIFICATION-TYPE Security Override Disengaged. The Remote Insight/ Integrated Lights-Out firmware has detected the security override jumper has been toggled to the disengaged position. | 1.3.6.1.4.1.232.0.9013 | |
| cpqSm2ServerFatalError NOTIFICATION-TYPE Server Fatal Error Detected. The Remote Insight/ Integrated Lights-Out firmware has detected a server fatal error. | 1.3.6.1.4.1.232.0.9014 | |
| cpqSm2NicLinkDown NOTIFICATION-TYPE The iLO NIC Link is Down. The Remote Insight/ Integrated Lights-Out firmware has detected the loss of network link. | 1.3.6.1.4.1.232.0.9015 | |
| cpqSm2NicLinkUp NOTIFICATION-TYPE The iLO NIC Link is Up. The Remote Insight/ Integrated Lights-Out firmware has detected the presence of network link. | 1.3.6.1.4.1.232.0.9016 | |
| cpqSm2ServerPowerOn NOTIFICATION-TYPE The server has been powered on. This will be sent once a server power on transition has occurred. | 1.3.6.1.4.1.232.0.9017 | |
| cpqSm2ServerPowerOff NOTIFICATION-TYPE The server has been powered off. This will be sent once the server has been powered off, either by OS, or the power button. | 1.3.6.1.4.1.232.0.9018 | |
| cpqSm2ServerPowerOnFailure NOTIFICATION-TYPE A request was made to power on the server, however the server could not be powered on due to a failure condition. | 1.3.6.1.4.1.232.0.9019 | |
| cpqSm2IrsCommFailure NOTIFICATION-TYPE The iLO to Insight Remote Support or Insight Online communication failed. | 1.3.6.1.4.1.232.0.9020 | |
| cpqSm2FirmwareValidationScanFailed NOTIFICATION-TYPE The firmware integrity scan or boot time validation detected an anomaly that requires the firmware to be updated. | 1.3.6.1.4.1.232.0.9021 | |
| cpqSm2FirmwareValidationScanErrorRepaired NOTIFICATION-TYPE Firmware integrity scan or boot time validation issue reported has been repaired. | 1.3.6.1.4.1.232.0.9022 | |
| cpqSm2FirmwareValidationAutoRepairFailed NOTIFICATION-TYPE Integrated Lights-Out failed to automatically repair the integrity scan issue. | 1.3.6.1.4.1.232.0.9023 | |
| cpqSm2AutoShutdownInitiated NOTIFICATION-TYPE Integrated Lights-Out initiated an automatic operating system shutdown . | 1.3.6.1.4.1.232.0.9024 | |
| cpqSm2AutoShutdownCancelled NOTIFICATION-TYPE Integrated Lights-Out cancelled previously initiated automatic operating system shutdown. | 1.3.6.1.4.1.232.0.9025 | |
| cpqSm2FwUpdateUploadFailed NOTIFICATION-TYPE Firmware update or upload failed. | 1.3.6.1.4.1.232.0.9026 | |
| cpqSm2SecurityStateChange NOTIFICATION-TYPE Security state changed. | 1.3.6.1.4.1.232.0.9027 | |
| cpqSm2WDTimerReset NOTIFICATION-TYPE The Management processor detected a Watchdog Timer Timeout. The failsafe timer was not periodically addressed after it was armed in the operating system. | 1.3.6.1.4.1.232.0.9028 | |
| cpqSm2OverallSecStateAtRisk NOTIFICATION-TYPE The overall security state of the system is at risk. | 1.3.6.1.4.1.232.0.9029 | |
| cpqSm2OverallSecStatusChange NOTIFICATION-TYPE Overall security status changed. | 1.3.6.1.4.1.232.0.9030 |