MIBs Depot

CPQIDE-MIB

Registered at
1.3.6.1.4.1.232.14
Namespace
hp
Source file
CPQIDE-MIB
Digest
sha256:7b5d8aabc14dbcc9f81ff23d6508b7062dfe8ffa14cb5c7b5d51adfcc2fa34e4

Imports

FromSymbols
CPQHOST-MIBcompaq, cpqHoTrapFlags
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-MIBsysName
SNMPv2-SMICounter32, Gauge32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, enterprises, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

CPQHOST-MIB
CPQIDE-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
cpqIde
OBJECT-IDENTITY
1.3.6.1.4.1.232.14
cpqIdeMibRev
OBJECT-IDENTITY
1.3.6.1.4.1.232.14.1
cpqIdeMibRevMajor
OBJECT-TYPE
The Major Revision level. A change in the major revision level represents a major change in the architecture of the MIB. A change in the major revision level may indicate a significant change in the information supported and/or the meaning of the supported information, correct interpretation of data may require a MIB document with the same major revision level.
1.3.6.1.4.1.232.14.1.1INTEGER (1..65535)read-onlymandatory
cpqIdeMibRevMinor
OBJECT-TYPE
The Minor Revision level. A change in the minor revision level may represent some minor additional support; no changes to any pre-existing information has occurred.
1.3.6.1.4.1.232.14.1.2INTEGER (0..65535)read-onlymandatory
cpqIdeMibCondition
OBJECT-TYPE
The overall condition. This object represents the overall status of the Ide system represented by this MIB.
1.3.6.1.4.1.232.14.1.3INTEGER {other(1), ok(2), degraded(3), failed(4)}read-onlymandatory
cpqIdeComponent
OBJECT-IDENTITY
1.3.6.1.4.1.232.14.2
cpqIdeInterface
OBJECT-IDENTITY
1.3.6.1.4.1.232.14.2.1
cpqIdeOsCommon
OBJECT-IDENTITY
1.3.6.1.4.1.232.14.2.1.4
cpqIdeOsCommonPollFreq
OBJECT-TYPE
The Insight Agent`s polling frequency. The frequency, in seconds, at which the Insight Agent requests information from the device driver. A frequency of zero indicates that the Insight Agent retrieves the information upon request of a management station, it does not poll the device driver at a specific interval. If the poll frequency is zero (0) all attempts to write to this object will fail. If the poll frequency is non-zero, setting this value will change the polling frequency of the Insight Agent. Setting the poll frequency to zero will always fail, an agent may also choose to fail any request to change the poll frequency to a value that would severely impact system performance.
1.3.6.1.4.1.232.14.2.1.4.1INTEGER (0..65535)read-writemandatory
cpqIdeOsCommonModuleTable
OBJECT-TYPE
A table of software modules that provide an interface to the device this MIB describes.
1.3.6.1.4.1.232.14.2.1.4.2not-accessibledeprecated
cpqIdeOsCommonModuleEntry
OBJECT-TYPE
A description of a software modules that provide an interface to the device this MIB describes.
1.3.6.1.4.1.232.14.2.1.4.2.1not-accessibledeprecated
cpqIdeOsCommonModuleIndex
OBJECT-TYPE
A unique index for this module description.
1.3.6.1.4.1.232.14.2.1.4.2.1.1INTEGER (0..255)read-onlydeprecated
cpqIdeOsCommonModuleName
OBJECT-TYPE
The module name.
1.3.6.1.4.1.232.14.2.1.4.2.1.2DisplayString (SIZE(0..255))read-onlydeprecated
cpqIdeOsCommonModuleVersion
OBJECT-TYPE
The module version in XX.YY format. Where XX is the major version number and YY is the minor version number. This field will be a null (size 0) string if the agent cannot provide the module version.
1.3.6.1.4.1.232.14.2.1.4.2.1.3DisplayString (SIZE(0..5))read-onlydeprecated
cpqIdeOsCommonModuleDate
OBJECT-TYPE
The module date. field octets contents range ===== ====== ======= ===== 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minute 0..59 6 7 second 0..60 (use 60 for leap-second) This field will be set to year = 0 if the agent cannot provide the module date. The hour, minute, and second field will be set to zero (0) if they are not relevant.
1.3.6.1.4.1.232.14.2.1.4.2.1.4OCTET STRING (SIZE(7))read-onlydeprecated
cpqIdeOsCommonModulePurpose
OBJECT-TYPE
The purpose of the module described in this entry.
1.3.6.1.4.1.232.14.2.1.4.2.1.5DisplayString (SIZE(0..255))read-onlydeprecated
cpqIdeIdent
OBJECT-IDENTITY
1.3.6.1.4.1.232.14.2.2
cpqIdeIdentTable
OBJECT-TYPE
IDE Drive Identification Table.
1.3.6.1.4.1.232.14.2.2.1not-accessiblemandatory
cpqIdeIdentEntry
OBJECT-TYPE
IDE Identification Table Entry.
1.3.6.1.4.1.232.14.2.2.1.1not-accessiblemandatory
cpqIdeIdentIndex
OBJECT-TYPE
An index that uniquely specifies each device. For disks, this index value will match the value of the cpqSeFixedDiskIndex in the Standard Equipment MIB (CPQSTDEQ.MIB) when the same disk is being described. Each possible index value indicates a specific drive as shown in the table below: Drive Index IDE Controller Drive Unit =========== ============== ========== 0 Primary 1 1 Primary 2 2 Secondary 1 3 Secondary 2 Any other index value would be implementation specific.
1.3.6.1.4.1.232.14.2.2.1.1.1INTEGER (0..65535)read-onlymandatory
cpqIdeIdentModel
OBJECT-TYPE
IDE Drive Model. The is the drive model name and can be used for identification purposes.
1.3.6.1.4.1.232.14.2.2.1.1.2DisplayString (SIZE(0..41))read-onlymandatory
cpqIdeIdentSerNum
OBJECT-TYPE
IDE Drive Serial Number. The is the drive serial number and can be used for identification purposes.
1.3.6.1.4.1.232.14.2.2.1.1.3DisplayString (SIZE(0..21))read-onlymandatory
cpqIdeIdentFWVers
OBJECT-TYPE
IDE Firmware Version. This is the version of the firmware on the IDE drive. If the IDE drive firmware version is unavailable, then this string will be of length zero (0).
1.3.6.1.4.1.232.14.2.2.1.1.4DisplayString (SIZE(0..9))read-onlymandatory
cpqIdeIdentCondition
OBJECT-TYPE
IDE Drive Condition. This is the overall condition of the IDE drive. The following values are defined: other(1) The drive does not support drive condition monitoring. ok(2) The drive is operating normally. No user action is required. degraded(3) The drive is degraded. The drive may need to be replaced. failed(4) The drive has failed. The drive should be replaced.
1.3.6.1.4.1.232.14.2.2.1.1.5INTEGER {other(1), ok(2), degraded(3), failed(4)}read-onlydeprecated
cpqIdeIdentErrorNumber
OBJECT-TYPE
IDE Error Number. This value represents the error code associated with a failing IDE drive.
1.3.6.1.4.1.232.14.2.2.1.1.6DisplayString (SIZE(0..32))read-onlymandatory
cpqIdeIdentType
OBJECT-TYPE
IDE Device Type. This is the type of ATAPI device. The following types are defined: other(1) The Insight agent does not recognize this type. You may need to upgrade your software. disk(2) This is a direct-access device like a disk drive. tape(3) This is a sequential-access device like a tape drive. printer(4) This is a printer device. processor(5) This is a processor device. worm(6) This is a write-once, read-many times device. cd-rom(7) This is a CD or DVD device. scanner(8) This is a scanner device. optical(9) This is an optical memory device. jukeBox(10) This is a media changer device like a jukebox. commDev(11) This is a communications device like a LAN bridge.
1.3.6.1.4.1.232.14.2.2.1.1.7INTEGER {other(1), disk(2), tape(3), printer(4), processor(5), wormDrive(6), cd-rom(7), scanner(8), optical(9), jukeBox(10), commDev(11)}read-onlymandatory
cpqIdeIdentTypeExtended
OBJECT-TYPE
IDE Extended Device Type. This is additional information about the type of IDE device. The following types are defined: other(1) This target does not have any extended type information. pdcd(2) This is a power-drive CD-ROM. removableDisk(3) This is a removable media disk device like a floppy drive.
1.3.6.1.4.1.232.14.2.2.1.1.8INTEGER {other(1), pdcd(2), removableDisk(3)}read-onlymandatory
cpqIdeIdentCondition2
OBJECT-TYPE
IDE Drive Condition. This is the overall condition of the IDE drive. The following values are defined: other(1) The drive does not support drive condition monitoring. ok(2) The drive is operating normally. No user action is required. degraded(3) The drive is degraded. See cpqIdeIdentStatus for the appropriate action. failed(4) The drive has failed. See cpqIdeIdentStatus for the appropriate action.
1.3.6.1.4.1.232.14.2.2.1.1.9INTEGER {other(1), ok(2), degraded(3), failed(4)}read-onlymandatory
cpqIdeIdentStatus
OBJECT-TYPE
IDE Drive Satus. This indicates the status of the IDE drive. The following values are defined: other(1) The drive does not support drive status monitoring. ok(2) The drive is operating normally. No user action is required. preFailureDegraded(3) The drive has detected that at least one pre-failure SMART attribute has gone out of range. The drive may need to be replaced. ultraAtaDegraded(4) The Ultra ATA Integrity Monitor has detected data transmission errors between the hard drive and processor. For best performance, move Ultra ATA devices to the primary controller and non Ultra ATA devices to the secondary controller. If errors still persist, consider replacing the standard 40-conductor cable with and 80-conductor cable.
1.3.6.1.4.1.232.14.2.2.1.1.10INTEGER {other(1), ok(2), preFailureDegraded(3), ultraAtaDegraded(4)}read-onlymandatory
cpqIdeIdentUltraAtaAvailability
OBJECT-TYPE
This describes the availability of Ultra ATA transfers between this device and the controller. The following values are defined: other(1) The agents do not support reporting this variable or the agent need to be upgraded. noNotSupportedByDeviceAndController(2), The device and the controller do not support Ultra ATA. noNotSupportedByDevice(3), The device does not support Ultra ATA but the controller does support Ultra ATA. noNotSupportedByController(4), The controller does not support Ultra ATA but the device does support Ultra ATA. NoDisabledInSetup(5), The device and the controller do support Ultra ATA but it has been disabled in F10 Setup. yesEnabledInSetup(6), The device and the controller do support Ultra ATA and it is enabled in F10 Setup.
1.3.6.1.4.1.232.14.2.2.1.1.11INTEGER {other(1), noNotSupportedByDeviceAndController(2), noNotSupportedByDevice(3), noNotSupportedByController(4), noDisabledInSetup(5), yesEnabledInSetup(6)}read-onlymandatory
cpqIdeController
OBJECT-IDENTITY
1.3.6.1.4.1.232.14.2.3
cpqIdeControllerTable
OBJECT-TYPE
IDE Controller Table.
1.3.6.1.4.1.232.14.2.3.1not-accessiblemandatory
cpqIdeControllerEntry
OBJECT-TYPE
IDE Controller Table Entry.
1.3.6.1.4.1.232.14.2.3.1.1not-accessiblemandatory
cpqIdeControllerIndex
OBJECT-TYPE
An index that uniquely identifies each controller.
1.3.6.1.4.1.232.14.2.3.1.1.1INTEGERread-onlymandatory
cpqIdeControllerOverallCondition
OBJECT-TYPE
IDE Controller Overall Condition. This is the overall condition of the IDE controller and any associated devices.
1.3.6.1.4.1.232.14.2.3.1.1.2INTEGER {other(1), ok(2), degraded(3), failed(4)}read-onlymandatory
cpqIdeControllerModel
OBJECT-TYPE
IDE Controller Model. The is the IDE controller model name.
1.3.6.1.4.1.232.14.2.3.1.1.3DisplayStringread-onlymandatory
cpqIdeControllerFwRev
OBJECT-TYPE
IDE Controller Firmware Revision. The is the IDE controller firmware revision.
1.3.6.1.4.1.232.14.2.3.1.1.4DisplayStringread-onlymandatory
cpqIdeControllerSlot
OBJECT-TYPE
IDE Controller Slot. This identifies the physical slot where the IDE controller resides in the system. For example, if this value is three, the controller is located in slot three of your computer. If the value cannot be determined or is not applicable, the value is set to -1.
1.3.6.1.4.1.232.14.2.3.1.1.5INTEGERread-onlymandatory
cpqIdeControllerStatus
OBJECT-TYPE
IDE Channel Host Controller Status. The host controller can be in one of the following states: Other (1) The agent is unable to determine the status of the controller. OK (2) Indicates that the controller is in normal operation mode. Failed (3) Indicates that the host controller has failed and should be replaced.
1.3.6.1.4.1.232.14.2.3.1.1.6INTEGER {other(1), ok(2), failed(3)}read-onlymandatory
cpqIdeControllerCondition
OBJECT-TYPE
IDE Controller Condition. This is the condition of the IDE controller.
1.3.6.1.4.1.232.14.2.3.1.1.7INTEGER {other(1), ok(2), degraded(3), failed(4)}read-onlymandatory
cpqIdeControllerSerialNumber
OBJECT-TYPE
IDE Controller Serial Number. The is the IDE controller serial number. A NULL string indicates that the serial number could not be determined or is irrelevant.
1.3.6.1.4.1.232.14.2.3.1.1.8DisplayStringread-onlymandatory
cpqIdeControllerHwLocation
OBJECT-TYPE
IDE Controller Hardware Location. A text description of the hardware location of the controller. A NULL string indicates that the hardware location could not be determined or is irrelevant.
1.3.6.1.4.1.232.14.2.3.1.1.9DisplayStringread-onlyoptional
cpqIdeControllerPciLocation
OBJECT-TYPE
IDE Controller PCI Location. A string designating the PCI device location for the controller, following the format DDDD:BB:DD.F, where DDDD is the PCI domain number, BB is the PCI bus number, DD is the PCI device number, and F is the PCI function number. A NULL string indicates that the location could not be determined or is irrelevant.
1.3.6.1.4.1.232.14.2.3.1.1.10DisplayStringread-onlyoptional
cpqIdeAtaDisk
OBJECT-IDENTITY
1.3.6.1.4.1.232.14.2.4
cpqIdeAtaDiskTable
OBJECT-TYPE
IDE ATA Disk Table.
1.3.6.1.4.1.232.14.2.4.1not-accessiblemandatory
cpqIdeAtaDiskEntry
OBJECT-TYPE
IDE ATA Disk Table Entry.
1.3.6.1.4.1.232.14.2.4.1.1not-accessiblemandatory
cpqIdeAtaDiskControllerIndex
OBJECT-TYPE
An index that uniquely identifies each controller.
1.3.6.1.4.1.232.14.2.4.1.1.1INTEGERread-onlymandatory
cpqIdeAtaDiskIndex
OBJECT-TYPE
An index that uniquely identifies each disk.
1.3.6.1.4.1.232.14.2.4.1.1.2INTEGERread-onlymandatory
cpqIdeAtaDiskModel
OBJECT-TYPE
ATA Disk Model. The is the model name of the ATA disk.
1.3.6.1.4.1.232.14.2.4.1.1.3DisplayStringread-onlymandatory
cpqIdeAtaDiskFwRev
OBJECT-TYPE
ATA Disk Firmware Revision. The is the firmware revision of the ATA disk.
1.3.6.1.4.1.232.14.2.4.1.1.4DisplayStringread-onlymandatory
cpqIdeAtaDiskSerialNumber
OBJECT-TYPE
ATA Disk Serial Number. The is the serial number of the ATA disk.
1.3.6.1.4.1.232.14.2.4.1.1.5DisplayStringread-onlymandatory
cpqIdeAtaDiskStatus
OBJECT-TYPE
ATA Disk Status. This is the status of the ATA disk.
1.3.6.1.4.1.232.14.2.4.1.1.6INTEGER {other(1), ok(2), smartError(3), failed(4), ssdWearOut(5), removed(6), inserted(7)}read-onlymandatory
cpqIdeAtaDiskCondition
OBJECT-TYPE
ATA Disk Condition. This is the condition of the ATA disk.
1.3.6.1.4.1.232.14.2.4.1.1.7INTEGER {other(1), ok(2), degraded(3), failed(4)}read-onlymandatory
cpqIdeAtaDiskCapacity
OBJECT-TYPE
ATA Disk Capacity. This is the capacity of the ATA disk in megabytes.
1.3.6.1.4.1.232.14.2.4.1.1.8INTEGERread-onlymandatory
cpqIdeAtaDiskSmartEnabled
OBJECT-TYPE
ATA Disk S.M.A.R.T Enabled? other(1) The agent cannot determine the state of S.M.A.R.T. monitoring on this ATA disk. true(2) The ATA disk has S.M.A.R.T motitoring enabled. false(3) The ATA disk does not have S.M.A.R.T motitoring enabled.
1.3.6.1.4.1.232.14.2.4.1.1.9INTEGER {other(1), true(2), false(3)}read-onlymandatory
cpqIdeAtaDiskTransferMode
OBJECT-TYPE
ATA Disk Transfer Mode. other(1) The agent cannot determine the transfer mode on this ATA disk. pioMode0(2) The ATA disk is using PIO mode 0. pioMode1(3) The ATA disk is using PIO mode 1. pioMode2(4) The ATA disk is using PIO mode 2. pioMode3(5) The ATA disk is using PIO mode 3. pioMode4(6) The ATA disk is using PIO mode 4. dmaMode0(7) The ATA disk is using DMA mode 0. dmaMode1(8) The ATA disk is using DMA mode 1. dmaMode2(9) The ATA disk is using DMA mode 2. ultraDmaMode0(10) The ATA disk is using Ultra DMA mode 0. ultraDmaMode1(11) The ATA disk is using Ultra DMA mode 1. ultraDmaMode2(12) The ATA disk is using Ultra DMA mode 2. ultraDmaMode3(13) The ATA disk is using Ultra DMA mode 3. ultraDmaMode4(14) The ATA disk is using Ultra DMA mode 4. ultraDmaMode5(15) The ATA disk is using Ultra DMA mode 5.
1.3.6.1.4.1.232.14.2.4.1.1.10INTEGER {other(1), pioMode0(2), pioMode1(3), pioMode2(4), pioMode3(5), pioMode4(6), dmaMode0(7), dmaMode1(8), dmaMode2(9), ultraDmaMode0(10), ultraDmaMode1(11), ultraDmaMode2(12), ultraDmaMode3(13), ultraDmaMode4(14), ultraDmaMode5(15)}read-onlymandatory
cpqIdeAtaDiskChannel
OBJECT-TYPE
ATA Disk Channel. other(1) The agent cannot determine the channel to which the ATA disk is attached. channel0(2) The ATA disk is attached to the primary channel. channel1(3) The ATA disk is attached to the secondary channel. serial(4) The disk is attached to the serial interface and channel no longer applies.
1.3.6.1.4.1.232.14.2.4.1.1.11INTEGER {other(1), channel0(2), channel1(3), serial(4)}read-onlymandatory
cpqIdeAtaDiskNumber
OBJECT-TYPE
ATA Disk Number. other(1) The agent cannot determine the number of the ATA disk. device0(2) The ATA disk is device 0 (master). device1(3) The ATA disk is device 1 (slave). sataDevice0(4) The SATA disk is device 0. sataDevice1(5) The SATA disk is device 1. sataDevice2(6) The SATA disk is device 2. sataDevice3(7) The SATA disk is device 3. sataDevice4(8) The SATA disk is device 4. sataDevice5(9) The SATA disk is device 5. sataDevice6(10) The SATA disk is device 6. sataDevice7(11) The SATA disk is device 7. sataDevice8(12) The SATA disk is device 8. sataDevice9(13) The SATA disk is device 9. sataDevice10(14) The SATA disk is device 10. sataDevice11(15) The SATA disk is device 11. sataDevice12(16) The SATA disk is device 12. sataDevice13(17) The SATA disk is device 13. sataDevice14(18) The SATA disk is device 14. sataDevice15(19) The SATA disk is device 15. sataDevice16(20) The SATA disk is device 16. bay1(21) The disk is in bay 1. bay2(22) The disk is in bay 2. bay3(23) The disk is in bay 3. bay4(24) The disk is in bay 4. bay5(25) The disk is in bay 5. bay6(26) The disk is in bay 6. bay7(27) The disk is in bay 7. bay8(28) The disk is in bay 8. bay9(29) The disk is in bay 9. bay10(30) The disk is in bay 10. bay11(31) The disk is in bay 11. bay12(32) The disk is in bay 12. bay13(33) The disk is in bay 13. bay14(34) The disk is in bay 14. bay15(35) The disk is in bay 15. bay16(36) The disk is in bay 16. bay17(37) The disk is in bay 17. bay18(38) The disk is in bay 18. bay19(39) The disk is in bay 19. bay20(40) The disk is in bay 20. bay21(41) The disk is in bay 21. bay22(42) The disk is in bay 22. bay23(43) The disk is in bay 23. bay24(44) The disk is in bay 24.
1.3.6.1.4.1.232.14.2.4.1.1.12INTEGER {other(1), device0(2), device1(3), sataDevice0(4), sataDevice1(5), sataDevice2(6), sataDevice3(7), sataDevice4(8), sataDevice5(9), sataDevice6(10), sataDevice7(11), sataDevice8(12), sataDevice9(13), sataDevice10(14), sataDevice11(15), sataDevice12(16), sataDevice13(17), sataDevice14(18), sataDevice15(19), sataDevice16(20), bay1(21), bay2(22), bay3(23), bay4(24), bay5(25), bay6(26), bay7(27), bay8(28), bay9(29), bay10(30), bay11(31), bay12(32), bay13(33), bay14(34), bay15(35), bay16(36), bay17(37), bay18(38), bay19(39), bay20(40), bay21(41), bay22(42), bay23(43), bay24(44)}read-onlymandatory
cpqIdeAtaDiskLogicalDriveMember
OBJECT-TYPE
Logical Drive Membership? other(1) The agent cannot determine if the ATA disk is part of a logical drive. true(2) The ATA disk is part of a logical drive. false(3) The ATA disk is not part of a logical drive.
1.3.6.1.4.1.232.14.2.4.1.1.13INTEGER {other(1), true(2), false(3)}read-onlymandatory
cpqIdeAtaDiskIsSpare
OBJECT-TYPE
ATA Disk Spare? other(1) The agent cannot determine if the ATA disk is a spare. true(2) The ATA disk is a spare disk. false(3) The ATA disk is not a spare disk.
1.3.6.1.4.1.232.14.2.4.1.1.14INTEGER {other(1), true(2), false(3)}read-onlymandatory
cpqIdeAtaDiskOsName
OBJECT-TYPE
ATA Disk OS Name. The OS name for this ATA disk. This field will be a null (size 0) string if the agent does not support OS name or if the ATA disk is part of a logical drive.
1.3.6.1.4.1.232.14.2.4.1.1.15DisplayString (SIZE(0..255))read-onlymandatory
cpqIdeAtaDiskType
OBJECT-TYPE
ATA Disk Type other(1) The agent cannot determine the disk type. ata(2) The disk type is parallel ATA. sata(3) The disk type is Serial ATA.
1.3.6.1.4.1.232.14.2.4.1.1.16INTEGER {other(1), ata(2), sata(3)}read-onlymandatory
cpqIdeAtaDiskSataVersion
OBJECT-TYPE
Physical Drive SATA Version. The following values are defined: other(1) The agent is unable to determine the SATA version for this disk or it is not a SATA disk. sataOne(2) The disk is SATA version one. sataTwo(3) The disk is SATA version two.
1.3.6.1.4.1.232.14.2.4.1.1.17INTEGER {other(1), sataOne(2), sataTwo(3)}read-onlymandatory
cpqIdeAtaDiskMediaType
OBJECT-TYPE
SATA Physical Drive Media Type. The following values are defined: other(1) The instrument agent is unable to determine the physical drives media type. rotatingPlatters(2) The physical drive media is composed of rotating platters. solidState(3) The physical drive media is composed of solid state electronics.
1.3.6.1.4.1.232.14.2.4.1.1.18INTEGER {other(1), rotatingPlatters(2), solidState(3)}read-onlymandatory
cpqIdeAtaDiskSSDWearStatus
OBJECT-TYPE
SATA Physical Drive Solid State Disk Wear Status. This shows the wear status of the solid state physical drive. The following values are valid for the physical drive solid state wear status: Other (1) The instrument agent is unable to determine the physical drives solid state disk wear status. This value would be used for non SSD drives or SSD drives that do not support wear reporting. Ok (2) Indicates the solid state disk is not in any imminent danger of wear out. Fifty Six Day Threshold Passed (3) Indicates that based upon the current workload, the solid state disk will reach the maximum usage limit for writes (wear out) within fifty-six days. You should modify your write workload or begin preparing to replace your SSD drive. Five Percent Threshold Passed (4) Indicates that the solid state disk has passed the five percent threshold and is at or below five percent of reaching the maximum usage limit for writes (wear out). You should begin to prepare to replace your SSD drive. Two Percent Threshold Passed (5) Indicates that the solid state disk has passed the two percent threshold and is at or below two percent of reaching the maximum usage limit for writes (wear out). You should begin to prepare to replace your SSD drive. SSD Wear Out(6) Indicates that a solid state drive is approaching the maximum usage limit for writes (wear out) and should be replaced as soon as possible.
1.3.6.1.4.1.232.14.2.4.1.1.19INTEGER {other(1), ok(2), fiftySixDayThreshold(3), fivePercentThreshold(4), twoPercentThreshold(5), ssdWearOut(6)}read-onlymandatory
cpqIdeAtaDiskPowerOnHours
OBJECT-TYPE
SATA Physical Drive Power On Hours. This is the total number of hours that the physical disk has been powered on. This value will be 4,294,967,295 if the disk power on hours cannot be determined or is not supported.
1.3.6.1.4.1.232.14.2.4.1.1.20Counterread-onlymandatory
cpqIdeAtaDiskSSDPercntEndrnceUsed
OBJECT-TYPE
SATA Physical Drive Solid State Percent Endurance Used. This value specifies the hundredths of the percentage of solid state disk life used. The value of this field is allowed to exceed 100%. As an example, if the value reported is 50, this would indicate .50 percent endurance used. This value will be 4,294,967,295 if the percent endurance used cannot be determined or is not supported.
1.3.6.1.4.1.232.14.2.4.1.1.21Gaugeread-onlymandatory
cpqIdeAtaDiskSSDEstTimeRemainingHours
OBJECT-TYPE
SATA Physical Drive Solid State Estimated Time Remaining In Hours. This is the estimated total number of hours that the solid state physical disk has remaining. This value will be 4,294,967,295 if the solid state disk estimated time remaining in hours cannot be determined or is not supported.
1.3.6.1.4.1.232.14.2.4.1.1.22Counterread-onlymandatory
cpqIdeAtaDiskCurrTemperature
OBJECT-TYPE
SATA Physical Drive Current Operating Temperature degrees Celsius. A zero (0) indicates that the temperature information is not available.
1.3.6.1.4.1.232.14.2.4.1.1.23Gaugeread-onlymandatory
cpqIdeAtaDiskTemperatureThreshold
OBJECT-TYPE
SATA Physical Drive Maximum Operating Temperature in degrees Celsius. A zero (0) indicates that the threshold information is not available.
1.3.6.1.4.1.232.14.2.4.1.1.24Gaugeread-onlymandatory
cpqIdeAtaDiskMaximumOperatingTemp
OBJECT-TYPE
SATA Physical Drive Maximum Operating Temperature, as specified by the manufacturer, in degrees Celsius. A zero (0) indicates that the information is not available.
1.3.6.1.4.1.232.14.2.4.1.1.25Gaugeread-onlymandatory
cpqIdeAtaDiskDestructiveOperatingTemp
OBJECT-TYPE
SATA Physical Drive Destructive Operating Temperature, as specified by the manufacturer, in degrees Celsius, which if exceeded can cause damage to the drive. A zero (0) indicates that the information is not available.
1.3.6.1.4.1.232.14.2.4.1.1.26Gaugeread-onlymandatory
cpqIdeAtaDiskLocation
OBJECT-TYPE
Location of Disk Drive. The Location is the value of the SMBIOS type 242 Location String, if it is present. This field will be a null(size 0) string if the SMBIOS type 242 record does not support the location string.
1.3.6.1.4.1.232.14.2.4.1.1.27DisplayString (SIZE(0..255))read-onlymandatory
cpqIdeAtaDiskCapacityHighBytes
OBJECT-TYPE
ATA Disk Capacity in Bytes (high). The cpqIdeAtaDiskCapacityHighBytes and the cpqIdeAtaDiskCapacityLowBytes together show the total number of bytes read from the ATA disk. The actual number of bytes read equals the cpqIdeAtaDiskCapacityHighBytes times 2^32 plus the cpqIdeAtaDiskCapacityLowBytes.
1.3.6.1.4.1.232.14.2.4.1.1.28Counterread-onlymandatory
cpqIdeAtaDiskCapacityLowBytes
OBJECT-TYPE
ATA Disk Capacity in Bytes (low). The cpqIdeAtaDiskCapacityHighBytes and the cpqIdeAtaDiskCapacityLowBytes together show the total number of bytes read from the ATA disk. The actual number of bytes read equals the cpqIdeAtaDiskCapacityHighBytes times 2^32 plus the cpqIdeAtaDiskCapacityLowBytes.
1.3.6.1.4.1.232.14.2.4.1.1.29Counterread-onlymandatory
cpqIdeAtaEraseFailureType
OBJECT-TYPE
The value specifies the secure erase status of SATA drive. secureEraseNotSupported(2) Secure erase is not supported so proceeding with Basic Erase
1.3.6.1.4.1.232.14.2.4.2INTEGER {secureEraseFailed(1), secureEraseNotSupported(2), noEraseSupported(3)}read-onlymandatory
cpqIdeAtapiDevice
OBJECT-IDENTITY
1.3.6.1.4.1.232.14.2.5
cpqIdeAtapiDeviceTable
OBJECT-TYPE
IDE ATAPI Device Table.
1.3.6.1.4.1.232.14.2.5.1not-accessiblemandatory
cpqIdeAtapiDeviceEntry
OBJECT-TYPE
IDE ATAPI Device Table Entry.
1.3.6.1.4.1.232.14.2.5.1.1not-accessiblemandatory
cpqIdeAtapiDeviceControllerIndex
OBJECT-TYPE
An index that uniquely identifies each controller.
1.3.6.1.4.1.232.14.2.5.1.1.1INTEGERread-onlymandatory
cpqIdeAtapiDeviceIndex
OBJECT-TYPE
An index that uniquely identifies each ATAPI device.
1.3.6.1.4.1.232.14.2.5.1.1.2INTEGERread-onlymandatory
cpqIdeAtapiDeviceModel
OBJECT-TYPE
ATAPI Device Model. The is the model name of the ATAPI device.
1.3.6.1.4.1.232.14.2.5.1.1.3DisplayStringread-onlymandatory
cpqIdeAtapiDeviceFwRev
OBJECT-TYPE
ATAPI Device Firmware Revision. The is the firmware revision of the ATAPI device.
1.3.6.1.4.1.232.14.2.5.1.1.4DisplayStringread-onlymandatory
cpqIdeAtapiDeviceType
OBJECT-TYPE
ATAPI Device Type. This is the type of ATAPI device. The following types are defined: other(1) The agent does not recognize this type. You may need to upgrade your software. disk(2) This is a direct-access device like a disk drive. tape(3) This is a sequential-access device like a tape drive. printer(4) This is a printer device. processor(5) This is a processor device. worm(6) This is a write-once, read-many times device. cd-rom(7) This is a CD or DVD device. scanner(8) This is a scanner device. optical(9) This is an optical memory device. jukeBox(10) This is a media changer device like a jukebox. commDev(11) This is a communications device like a LAN bridge.
1.3.6.1.4.1.232.14.2.5.1.1.5INTEGER {other(1), disk(2), tape(3), printer(4), processor(5), wormDrive(6), cd-rom(7), scanner(8), optical(9), jukeBox(10), commDev(11)}read-onlymandatory
cpqIdeAtapiDeviceTypeExtended
OBJECT-TYPE
ATAPI Extended Device Type. This is additional information about the type of ATAPI device. The following types are defined: other(1) This target does not have any extended type information. pdcd(2) This is a power-drive CD-ROM. removableDisk(3) This is a removable media disk device like a floppy drive.
1.3.6.1.4.1.232.14.2.5.1.1.6INTEGER {other(1), pdcd(2), removableDisk(3)}read-onlymandatory
cpqIdeAtapiDeviceChannel
OBJECT-TYPE
ATAPI Device Channel. other(1) The agent cannot determine the channel to which the ATAPI device is attached. channel0(2) The ATAPI device is attached to the primary channel. channel1(3) The ATAPI device is attached to the secondary channel.
1.3.6.1.4.1.232.14.2.5.1.1.7INTEGER {other(1), channel0(2), channel1(3)}read-onlymandatory
cpqIdeAtapiDeviceNumber
OBJECT-TYPE
ATAPI Device Number. other(1) The agent cannot determine the number of the ATAPI device. device0(2) The ATAPI device is device 0 (master). device1(3) The ATAPI device is device 1 (slave).
1.3.6.1.4.1.232.14.2.5.1.1.8INTEGER {other(1), device0(2), device1(3)}read-onlymandatory
cpqIdeLogicalDrive
OBJECT-IDENTITY
1.3.6.1.4.1.232.14.2.6
cpqIdeLogicalDriveTable
OBJECT-TYPE
IDE Logical Drive Table.
1.3.6.1.4.1.232.14.2.6.1not-accessiblemandatory
cpqIdeLogicalDriveEntry
OBJECT-TYPE
IDE Logical Drive Table Entry.
1.3.6.1.4.1.232.14.2.6.1.1not-accessiblemandatory
cpqIdeLogicalDriveControllerIndex
OBJECT-TYPE
An index that uniquely identifies each controller.
1.3.6.1.4.1.232.14.2.6.1.1.1INTEGERread-onlymandatory
cpqIdeLogicalDriveIndex
OBJECT-TYPE
An index that uniquely identifies each logical drive.
1.3.6.1.4.1.232.14.2.6.1.1.2INTEGERread-onlymandatory
cpqIdeLogicalDriveRaidLevel
OBJECT-TYPE
IDE Logical Drive RAID Level. The following RAID levels are defined: other(1) The agent cannot determine the RAID level of this logical drive. raid0(2) The logical drive is configured with RAID level 0. raid1(3) The logical drive is configured with RAID level 1. raid0plus1(4) The logical drive is configured with RAID level 0 plus 1. raid5(5) The logical drive is configured with RAID level 5. raid15(6) The logical drive is configured with RAID level 1 plus 5. volume(7) The logical drive is configured as a volume set.
1.3.6.1.4.1.232.14.2.6.1.1.3INTEGER {other(1), raid0(2), raid1(3), raid0plus1(4), raid5(5), raid15(6), volume(7)}read-onlymandatory
cpqIdeLogicalDriveCapacity
OBJECT-TYPE
IDE Logical Drive Capacity. This is the capacity of the logical drive in megabytes.
1.3.6.1.4.1.232.14.2.6.1.1.4INTEGERread-onlymandatory
cpqIdeLogicalDriveStatus
OBJECT-TYPE
IDE Logical Drive Status. This is the status of the logical drive. other(1) The agent cannot determine the logical drive status. ok(2) Indicates that the logical drive is in normal operation mode. degraded(3) Indicates that at least one physical drive has failed, but the logical drive`s RAID level lets the drive continue to operate with no data loss. rebuilding(4) Indicates that the logical drive is rebuilding a physical drive. When complete, the logical drive will return to normal operation. failed(5) Indicates that more physical drives have failed than the RAID level of the logical drive can handle without data loss.
1.3.6.1.4.1.232.14.2.6.1.1.5INTEGER {other(1), ok(2), degraded(3), rebuilding(4), failed(5)}read-onlymandatory
cpqIdeLogicalDriveCondition
OBJECT-TYPE
IDE Logical Drive Condition. This is the condition of the logical drive.
1.3.6.1.4.1.232.14.2.6.1.1.6INTEGER {other(1), ok(2), degraded(3), failed(4)}read-onlymandatory
cpqIdeLogicalDriveDiskIds
OBJECT-TYPE
IDE Logical Drive Disk ID list. This lists the ATA disks drive IDs which are associated with this logical drive. These are the same IDs which can be used as indices into the ATA disk table (cpqIdeAtaDiskIndex). Each byte of the string is an index.
1.3.6.1.4.1.232.14.2.6.1.1.7OCTET STRING (SIZE(0..255))read-onlymandatory
cpqIdeLogicalDriveStripeSize
OBJECT-TYPE
IDE Logical Drive Stripe Size. This is the stripe size in kilobytes.
1.3.6.1.4.1.232.14.2.6.1.1.8INTEGERread-onlymandatory
cpqIdeLogicalDriveSpareIds
OBJECT-TYPE
IDE Logical Drive Spare ID list. This lists the ATA disks drive IDs which are possible spares for this logical drive. These are the same IDs which can be used as indices into the ATA disk table (cpqIdeAtaDiskIndex). Each byte of the string is an index.
1.3.6.1.4.1.232.14.2.6.1.1.9OCTET STRING (SIZE(0..255))read-onlymandatory
cpqIdeLogicalDriveRebuildingDisk
OBJECT-TYPE
IDE Logical Drive Rebuilding Disk. This is the ATA disk that is in the process of rebuilding. If no drive is currently rebuilding, a value of -1 will be returned.
1.3.6.1.4.1.232.14.2.6.1.1.10INTEGERread-onlymandatory
cpqIdeLogicalDriveOsName
OBJECT-TYPE
IDE Logical Drive OS Name. The OS name for this logical drive. This field will be a null (size 0) string if the agent does not support OS name.
1.3.6.1.4.1.232.14.2.6.1.1.11DisplayString (SIZE(0..255))read-onlymandatory

Notifications

NameOIDStatus
cpqIdeDriveDegraded
NOTIFICATION-TYPE
An IDE drive status has been set to degraded. User Action: The drive should be scheduled for replacement. Refer to the appropriate Maintenance and Service Guide for detailed information on a component replacement.
1.3.6.1.4.1.232.0.14001
cpqIdeDriveOk
NOTIFICATION-TYPE
An IDE drive status has been set to ok. User Action: None.
1.3.6.1.4.1.232.0.14002
cpqIdeDriveUltraAtaDegraded
NOTIFICATION-TYPE
An IDE drive detects an excessive number of Ultra ATA data transmission errors between the hard drive and the processor. User Action: For best performance move Ultra ATA devices to the primary controller and non Ultra ATA devices to the secondary controller. If errors still persist, consider replacing the standard 40-conductor IDE cable with an 80-conductor Ultra ATA cable.
1.3.6.1.4.1.232.0.14003
cpqIdeAtaDiskStatusChange
NOTIFICATION-TYPE
ATA Disk Status Change. This trap signifies that the agent has detected a change in the status of an ATA disk drive. The variable cpqIdeAtaDiskStatus indicates the current disk drive status. User Action: If cpqIdeAtaDiskStatus is `smartError(3)`, `failed(4)` or `ssdWearOut(5)` replace the drive.
1.3.6.1.4.1.232.0.14004
cpqIdeLogicalDriveStatusChange
NOTIFICATION-TYPE
IDE Logical Drive Status Change. This trap signifies that the agent has detected a change in the status of an IDE logical drive. The variable cpqIdeLogicalDriveStatus indicates the current logical drive status. User Action: If the logical drive status is failed(5), examine the array for failed drives that need replacement.
1.3.6.1.4.1.232.0.14005
cpqIdeAtaDiskSSDWearStatusChange
NOTIFICATION-TYPE
Solid State Disk Wear Status Change. This trap signifies that the agent has detected a change in the SSD wear status of a SATA physical drive. The variable cpqIdeAtaDiskSSDWearStatus indicates the current SSD wear status. User Action: If cpqIdeAtaDiskSSDWearStatus is `ssdWearOut(6)`, replace the drive.
1.3.6.1.4.1.232.0.14006
cpqIdeAtaSecureEraseFailed
NOTIFICATION-TYPE
Secure Erase of SATA drive has failed.
1.3.6.1.4.1.232.0.14007
cpqIdeAtaDiskStatusChange2
NOTIFICATION-TYPE
ATA Disk Status Change (with Location). This trap signifies that the agent has detected a change in the status of an ATA disk drive. The variable cpqIdeAtaDiskStatus indicates the current disk drive status. User Action: If cpqIdeAtaDiskStatus is `smartError(3)`, `failed(4)` or `ssdWearOut(5)` replace the drive.
1.3.6.1.4.1.232.0.14008
cpqIdeAtaDiskSSDWearStatusChange2
NOTIFICATION-TYPE
Solid State Disk Wear Status Change (with Location). This trap signifies that the agent has detected a change in the SSD wear status of a SATA physical drive. The variable cpqIdeAtaDiskSSDWearStatus indicates the current SSD wear status. User Action: If cpqIdeAtaDiskSSDWearStatus is `ssdWearOut(6)`, replace the drive.
1.3.6.1.4.1.232.0.14009