CPE-MANAGER
- Registered at
- 1.3.6.1.4.1.5504.3.1.21.1
- Last updated
- 2011-05-13 10:42
- Organization
- Zhone Technologies, Inc.
- Revisions
- 2011-05-13 09:17, 2011-02-08 06:48, 2010-10-28 12:06, 2010-09-22 07:42, 2010-05-18 10:00
- Namespace
- zhone
- Source file
CPE-MANAGER- Digest
sha256:52dcb4cba3196cc775996a501120c2fb53f8e2711a33224f20d1c2bc6b14b780
Description
The CPE Configuration Manager (a.k.a. Zero Touch Configuration) provides the ability for management software to automatically maintain CPE software version and boot time configuration on Zhone manufactured CPEs. To support this feature, Zhone CO equipment must maintain a database correlating a specified link with the required software version and configuration of the CPE at the far end of that link. This information is used to verify that the connected CPE is running the correct software image and is correctly configured. If it is not, the CPE will be automatically reconfigured to the correct software version and configuration as configured by these tables.
Contact
Postal: Zhone Technologies, Inc. @ Zhone Way 7001 Oakport Street Oakland, CA 94621 USA Toll-Free: +1 877-ZHONE20 (+1 877-946-6320) Tel: +1-510-777-7000 Fax: +1-510-777-7001 E-mail: support@zhone.com
Imports
| From | Symbols |
|---|---|
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, TEXTUAL-CONVENTION, TruthValue |
| ZHONE-SYSTEM-MIB | cpeMgr |
| Zhone-TC | ZhoneRowStatus |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
ATM-TC-MIB CPE-MANAGER IANAifType-MIB IF-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC ZHONE-COM-IP-RD-MIB ZHONE-COM-IP-REC-MIB ZHONE-INTERFACE-TRANSLATION-MIB ZHONE-SYSTEM-MIB Zhone Zhone-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| cpeMgrGlobal OBJECT-IDENTITY Global objects used by CPE Manager. | 1.3.6.1.4.1.5504.3.1.21.1.1 | current | ||
| cpeMgrGlobalObjects OBJECT-IDENTITY CPE Manager Global Objects. | 1.3.6.1.4.1.5504.3.1.21.1.1.1 | current | ||
| cpeMgrLocalVlanId OBJECT-TYPE Local VLAN ID used as the management VLAN between a CO device and locally managed CPEs. This VLAN should not be used for anything other than management traffic between the CO and CPEs. Once CPE management interfaces are created using this VLAN, it can not be changed. Also note, CPEs must be preprovisioned with a DHCP client on this VLAN for cpeMgr to operate correctly. | 1.3.6.1.4.1.5504.3.1.21.1.1.1.1 | Unsigned32 | read-write | current |
| cpeMgrLocalSlanId OBJECT-TYPE Local SLAN ID used as the management SLAN between a CO device and locally managed CPEs. This SLAN should not be used for anything other than management traffic between the CO and CPEs. Once CPE management interfaces are created using this SLAN, it can not be changed. Also note, CPEs must be preprovisioned with a DHCP client on this SLAN for cpeMgr to operate correctly. | 1.3.6.1.4.1.5504.3.1.21.1.1.1.2 | Unsigned32 | read-write | current |
| cpeCfgMgrConcurrentUpdateLimit OBJECT-TYPE The number of CPEs that can be granted the short lease IP with required updates by this CO device before an update storm is declared. Since downloads and uploads of files from a CPE will be NAT/PAT'ed at the CO CPU, too many at one time can impact CO performance. This field provides for tuning this performance as the local environment allows. | 1.3.6.1.4.1.5504.3.1.21.1.1.1.3 | Unsigned32 | read-write | current |
| cpeMgrGlobalConformance OBJECT-IDENTITY CPE Manager Global Objects Conformance. | 1.3.6.1.4.1.5504.3.1.21.1.1.2 | current | ||
| cpeMgrGlobalGroups OBJECT-IDENTITY CPE Manager Global Conformance Groups. | 1.3.6.1.4.1.5504.3.1.21.1.1.2.1 | current | ||
| cpeMgrGlobalCompliances OBJECT-IDENTITY CPE Manager Compliances. | 1.3.6.1.4.1.5504.3.1.21.1.1.2.2 | current | ||
| cpeConfigMgr OBJECT-IDENTITY CPE Configuration Manager. | 1.3.6.1.4.1.5504.3.1.21.1.2 | current | ||
| cpeConfigMgrNotifications OBJECT-IDENTITY CPE Config Manager Notifications. | 1.3.6.1.4.1.5504.3.1.21.1.2.0 | current | ||
| cpeConfigMgrObjects OBJECT-IDENTITY CPE Configuration Manager Objects. | 1.3.6.1.4.1.5504.3.1.21.1.2.1 | current | ||
| cpeConfigMgrTable OBJECT-TYPE The CPE Configuration Manager Table defines the common attributes applicable to a specific CPE type. There can be multiple cpeConfigMgrEntry's for each type of CPE to allow customers to define managed CPE groups specific to different end user requirements, versions and configurations. This table is indexed by a simple integer; however the user must define a text name for each entry for easier management and recognition. For most of these fields only rudimentary validation can be performed at the CO device. The accuracy of these fields is left up to the user. Note that a cpeConfigMgrEntry can not be deleted if any cpeConfigMgrMembers reference it. The members must be deleted first before the manager can be deleted. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.1 | not-accessible | current | |
| cpeConfigMgrEntry OBJECT-TYPE One CPE Configuration Manager. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1 | not-accessible | current | |
| cpeConfigMgrRowStatus OBJECT-TYPE The standard field for creating/destroying an entry via SNMP. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.1 | ZhoneRowStatus | read-create | current |
| cpeConfigMgrIndex OBJECT-TYPE Index to the cpeConfigMgrTable. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.2 | Integer32 (1..2147483647) | accessible-for-notify | current |
| cpeConfigMgrName OBJECT-TYPE This is an ASCII string containing the customer assigned name. Maximum length is 32 characters, and no whitespaces are allowed. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.3 | OCTET STRING (SIZE(1..32)) | read-create | current |
| cpeConfigMgrGroup OBJECT-TYPE The value of this field will be a simple integer defining a group of associated cpeConfigMgr's. All cpeConfigMgr's with the same group value form this association. This association allows the defining of multiple CPE type configurations for a given interface. Each cpeConfigMgrMember will be assigned to a cpeConfigMgrGroup. The attached CPE must be one of the types supported by this group, or an error will be logged and/or trapped. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.4 | Integer32 | read-create | current |
| managedCpeType OBJECT-TYPE This field designates the type of CPE configured by this entry. This string must match the string returned by the attached CPE exactly. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.5 | OCTET STRING (SIZE(1..16)) | read-create | current |
| requiredCpeSoftwareVersion OBJECT-TYPE A string defining the software version. If the value of this field doesn't match the software version string returned by the CPE exactly, then a software update will be initiated for the connected CPE. If this field is a NULL string, then the software version will not be managed. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.6 | OCTET STRING (SIZE(0..32)) | read-create | current |
| requiredCpeSoftwareFilename OBJECT-TYPE A string that specifies the filename the CPE must download if the requiredCpeSoftwareVersion comparison fails. This file must be available in the base path location on the download server. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.7 | OCTET STRING (SIZE(0..32)) | read-create | current |
| requiredCpeWebUIVersion OBJECT-TYPE A string defining the WebUI version. This version string must match exactly what the CPE returns or an upgrade of the WebUI file will be initiated. This only applies to certain CPE types. The CO device will not restrict setting this for CPEs that do not support it, but doing so will likely cause problems. If this field is left blank, but requiredCpeWebUIFilename is set, the CPE will be told to download a new WebUI file whenever it is also told to download a new software image file. This allows the WebUI file to be tied directly to the software image version. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.8 | OCTET STRING (SIZE(0..32)) | read-create | current |
| requiredCpeWebUIFilename OBJECT-TYPE A string that specifies the filename the CPE must download if the requiredCpeWebUIVersion comparison fails. This file must be available in the base path location on the download server. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.9 | OCTET STRING (SIZE(0..32)) | read-create | current |
| requiredCpeGenericConfigFile OBJECT-TYPE A string defining the generic configuration filename for CPEs using this manager. The CPE must specify this filename to the CO device. If the names do not match exactly, the CO device will inform the CPE to download this file from the download server at the base path location. The cpeConfigMgrMemberEntry for attached CPEs may define a specific configuration filename in the cpeSpecificConfigFile field that will supersede this generic file. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.10 | OCTET STRING (SIZE(0..32)) | read-create | current |
| cpeLeaseTimeUpdate OBJECT-TYPE The short lease time (in seconds) granted to a CPE during download of files. This value is also used for throttling a download storms. The default value for this field will be 5 minutes. This value should be long enough to accommodate the maximum time to download all files a CPE may need. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.11 | Integer32 | read-create | current |
| cpeLeaseTimeOperational OBJECT-TYPE The long lease time (in seconds) granted to a CPE if there is no upgrade required. The default for this value will be one day. This value should be short enough to accommodate frequent checks for configuration changes, but not too frequent to burden the CO device. If this device repeatedly fails to successfully update, this long lease time may be issued with no required updates to allow other CPEs time to update. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.12 | Integer32 | read-create | current |
| cpeConfigMgrDwnldSrvrToUsed OBJECT-TYPE Index of a cpeConfigMgrDownloadServerEntry containing the download server details this cpeConfigMgr passes to attached CPEs. This field must match an existing cpeCfgMgrDwnldSrvrIndex field. If it does not, no download server information will be sent to the CPE when needed. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.13 | Unsigned32 | read-create | current |
| cpeConfigMgrDownloadBasePath OBJECT-TYPE A string that specifies the directory path to the base location of configuration files on the download server for this cpeConfigMgr. This path location will contain the software image, webUI file, generic configuration file, and sub-paths to CPE specific files. This path is also used when checking the CPEs reported configuration with the required configuration for this CPE in CPE Config Manager. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.14 | OCTET STRING (SIZE(0..32)) | read-create | current |
| cpeConfigMgrDownloadSecureMode OBJECT-TYPE The desired security mode to use for downloading files. It can be one of three values: 1 = do not use secure download methods (use ftp or tftp), 2 = use secure download methods (sftp) 3 = no preference, | 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.15 | INTEGER {disabled(1), enabled(2), noPreference(3)} | read-create | current |
| cpeConfigMgrTrapsEnabled OBJECT-TYPE Enables or disables whether traps are sent from the CO device for events relating to this cpeConfigMgr. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.16 | TruthValue | read-create | current |
| cpeConfigScriptIndex OBJECT-TYPE Index of the cpe-config-script profile used to provision CPEs associated with the manager. Note, the cpe-config-script profile may still be called a gpon-onu-omci-me-profile from which this method of provisioning was extrapolated. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.17 | Unsigned32 | read-create | current |
| cpeConfigVarsIndex OBJECT-TYPE Index of the cpe-config-vars profile used to provision CPEs associated with the manager. The cpe-config-vars profile defines variables and their values used by the cpe-config-script. Note, the cpe-config-vars profile may still be called a gpon-onu-omci-generic-profile from which it is modeled after. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.18 | Unsigned32 | read-create | current |
| cpeConfigMgrDownloadServerTable OBJECT-TYPE Table defining download servers used by CPEs. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.2 | not-accessible | current | |
| cpeConfigMgrDownloadServerEntry OBJECT-TYPE Entry defining a download server used by CPE Config Manager Member CPEs. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.2.1 | not-accessible | current | |
| cpeCfgMgrDwnldSrvrRowStatus OBJECT-TYPE RowStatus object used to create an instance in this table. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.2.1.1 | ZhoneRowStatus | read-create | current |
| cpeCfgMgrDwnldSrvrIndex OBJECT-TYPE Unique number used to identify this download server instance. This field is the table index. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.2.1.2 | Unsigned32 | read-create | current |
| cpeCfgMgrDwnldSrvrIP OBJECT-TYPE The IP address of the server hosting update files available to CPEs. This server must support the file transfer methods required by the CPEs (ftp or sftp) for both upload and download. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.2.1.3 | IpAddress | read-create | current |
| cpeCfgMgrDwnldSrvrUsername OBJECT-TYPE Username the CPE uses when accessing files on the download server. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.2.1.4 | OCTET STRING (SIZE(0..16)) | read-create | current |
| cpeCfgMgrDwnldSrvrPassword OBJECT-TYPE Password the CPE uses when accessing files on the download server. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.2.1.5 | OCTET STRING (SIZE(0..16)) | read-create | current |
| cpeCfgMgrDwnldSrvrDefault OBJECT-TYPE Indicates this download server is used as the default download server when creating cpeConfigMgrEntry's. This is only used during config time, and not during runtime. If set to TRUE, and a new cpeConfigMgrEntry is created that does not specify a cpeConfigMgrDwnldSrvrToUsed value, then the index of this instance will be used. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.2.1.6 | TruthValue | read-create | current |
| cpeConfigMgrMemberTable OBJECT-TYPE The cpeConfigMgrMemberTable associates configured cpe-mgr interfaces with defined cpeConfigMgrEntrys. It also provides a means to associate a unique configuration file to the attached CPEs. This table is indexed by the cpeIfIndex field. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.3 | not-accessible | current | |
| cpeConfigMgrMemberEntry OBJECT-TYPE One CPE associated with a defined CPE Configuration Manager. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.3.1 | not-accessible | current | |
| cpeConfigMgrMemberRowStatus OBJECT-TYPE The standard field for creating/destroying an entry via SNMP. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.3.1.1 | ZhoneRowStatus | read-create | current |
| cpeConfigMgrGroupMembership OBJECT-TYPE This is the cpeConfigMgrGroup from the cpeConfigMgr table indicating which group this CPE is a member. This field is required and must point to a valid cpeConfigMgrGroup. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.3.1.2 | Unsigned32 | read-create | current |
| cpeSpecificConfigFile OBJECT-TYPE A string defining the specific configuration filename for this CPE. The CPE must specify this filename to the CO device. If the names do not match exactly, the CO device will inform the CPE to download this file from the download server. This file must be available at the specific download path. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.3.1.3 | OCTET STRING (SIZE(0..32)) | read-create | current |
| cpeSpecificDownloadPath OBJECT-TYPE This field defines the path to CPE specific files. This path is a sub-path to cpeConfigMgrDownloadBasePath. This path is also used when checking the CPEs reported specific configuration with the required configuration in CPE Config Manager. The default value of this field can take two forms depending on the port type: 1. <CO Public IP>/<slot>/<port>/<subport>/<interface type> 2. <CO Public IP>/<interface name>-<interface type> If the interface type can span multiple physical ports (i.e. bond groups), the second method will be used to define the default value. Operators are free to define their own values, however, this path must exist for files to be downloaded. If the CPE is required to upload to this path, it may create this path before doing the upload. The total path the CPE will use to access specific files is a concatenation of these two path fields: <cpeConfigMgrDownloadBasePath>/<cpeSpecificDownloadPath> | 1.3.6.1.4.1.5504.3.1.21.1.2.1.3.1.4 | OCTET STRING (SIZE(0..40)) | read-create | current |
| cpeConfigMgrMemberTrapsEnabled OBJECT-TYPE Enables or disables whether traps are sent from the CO device for events relating to this cpeConfigMgrMember. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.3.1.5 | TruthValue | read-create | current |
| cpeConfigMgrMemberStatusTable OBJECT-TYPE Table of runtime details of CPE Config Manager Members. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.4 | not-accessible | current | |
| cpeConfigMgrMemberStatusEntry OBJECT-TYPE Runtime details of one CPE Config Manager Member. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.4.1 | not-accessible | current | |
| cpeConfigMgrMemberStatus OBJECT-TYPE Status indication for the latest configuration of this CPE. Note, this field will change to ‘Not compared’ each time any field in this profile or it’s parent cpeConfigMgr is modified. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.4.1.1 | Bits {notCompared(0), noUpdateRequired(1), upgradeInfoSent(2), errorsDetected(3), cpeTypeMismatch(4), downloadStormThrottled(5), updateRetryLimitExceeded(6), softwareUpgradeNeeded(7), webuiUpgradeNeeded(8), configUpdateNeeded(9), configBackupNeeded(10), provisioningPending(11), provisioningActive(12), provisioningError(13)} | read-only | current |
| cpeConfigMgrUsed OBJECT-TYPE The index into the cpeConfigMgr table for the specific CPE Config Manager used. The cpeConfigMgr will be found based on matching the cpeCofnigMgrGroupMembership and reportedCpeType to the cpeConfigMgrGroup and managedCpeType fields in the cpeConfigMgr table. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.4.1.2 | Integer32 | read-only | current |
| reportedCpeType OBJECT-TYPE The cpeType value received from the attached CPE, used to compare against the value in cpeConfigMgrEntry.managedCpeType. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.4.1.3 | OCTET STRING (SIZE(0..16)) | read-only | current |
| reportedCpeSoftwareVersion OBJECT-TYPE A string containing the software image version received from the CPE. If this string does not exactly match the value of requiredCpeSoftwareVersion, a software image update will be initiated by the managing CO device. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.4.1.4 | OCTET STRING (SIZE(0..32)) | read-only | current |
| reportedCpeWebUIVersion OBJECT-TYPE A string containing the WebUI image version received from the CPE. If this string does not exactly match the value of requiredCpeWebUIVersion, a WebUI image update will be initiated by the managing CO device. Not all CPE types require or support a separate WebUI file. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.4.1.5 | OCTET STRING (SIZE(0..32)) | read-only | current |
| reportedCpeConfigFilename OBJECT-TYPE The filename of the configuration the CPE is currently running. This filename must exactly match the value of cpeSpecificConfigFile or requiredCpeGenericConfigFile. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.4.1.6 | OCTET STRING (SIZE(0..32)) | read-only | current |
| reportedCpeSerialNumber OBJECT-TYPE A string containing the serial number reported by the CPE. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.4.1.7 | OCTET STRING (SIZE(0..8)) | read-only | current |
| reportedCpeRegistrationID OBJECT-TYPE A string containing the registration ID reported by the CPE. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.4.1.8 | OCTET STRING (SIZE(0..10)) | read-only | current |
| reportedCpeFSAN OBJECT-TYPE A string containing the FSAN value reported by the CPE. The FSAN is a string of ASCII decimal digits representing the vendor-specific portion of the onu serial number in hex format | 1.3.6.1.4.1.5504.3.1.21.1.2.1.4.1.9 | OCTET STRING (SIZE(0..16)) | read-only | current |
| reportedCpeMacAddress OBJECT-TYPE The MAC address used by the CPE on the cpe-mgr interface. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.4.1.10 | MacAddress | read-only | current |
| reportedDwnldSrvrBasePath OBJECT-TYPE The cpeConfigMgrDownloadBasePath the CPE last received and now reports back to the CO. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.4.1.11 | OCTET STRING (SIZE(0..32)) | read-only | current |
| reportedDwnldSrvrSpecificPath OBJECT-TYPE The cpeSpecificDownloadPath the CPE last received and now reports back to the CO. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.4.1.12 | OCTET STRING (SIZE(0..40)) | read-only | current |
| reportedCpeState OBJECT-TYPE CPE State as reported by the CPE itself. This may not be completely accurate due to errors detected on the CO side. For example, if the update of a CPE is throttled, the CPE is told no updates required. In this state the CPE will consider itself 'operational', but the CO side knows otherwise. | 1.3.6.1.4.1.5504.3.1.21.1.2.1.4.1.13 | Integer32 | read-only | current |
| cpeConfigMgrConformance OBJECT-IDENTITY CPE Configuration Manager Conformance. | 1.3.6.1.4.1.5504.3.1.21.1.2.2 | current | ||
| cpeConfigMgrGroups OBJECT-IDENTITY CPE Configuraiton Manager conformance groups. | 1.3.6.1.4.1.5504.3.1.21.1.2.2.1 | current | ||
| cpeConfigMgrCompliances OBJECT-IDENTITY CPE Configuration Manager Compliances. | 1.3.6.1.4.1.5504.3.1.21.1.2.2.2 | current | ||
| cpeConfigMgrClient OBJECT-IDENTITY CPE Configuration Manager Client. | 1.3.6.1.4.1.5504.3.1.21.1.3 | current | ||
| cpeCfgMgrClientNotifications OBJECT-IDENTITY CPE Configuration Manager Client notifications. | 1.3.6.1.4.1.5504.3.1.21.1.3.0 | current | ||
| cpeCfgMgrClientObjects OBJECT-IDENTITY CPE Configuration Manager Client Objects. | 1.3.6.1.4.1.5504.3.1.21.1.3.1 | current | ||
| cpeCfgMgrClientIdObjects OBJECT-IDENTITY CPE Configuration Manager Client Identity Objects. | 1.3.6.1.4.1.5504.3.1.21.1.3.1.1 | current | ||
| cpeCfgMgrClientSerialNumber OBJECT-TYPE The serial number of this CPE. | 1.3.6.1.4.1.5504.3.1.21.1.3.1.1.1 | OCTET STRING (SIZE(0..8)) | read-only | current |
| cpeCfgMgrClientRegistrationID OBJECT-TYPE The registration ID of this CPE. | 1.3.6.1.4.1.5504.3.1.21.1.3.1.1.2 | OCTET STRING (SIZE(0..10)) | read-only | current |
| cpeCfgMgrClientFSAN OBJECT-TYPE A string containing the FSAN value of this CPE. The FSAN is a string of ASCII decimal digits representing the vendor-specific portion of the onu serial number in hex format | 1.3.6.1.4.1.5504.3.1.21.1.3.1.1.3 | OCTET STRING (SIZE(0..16)) | read-only | current |
| cpeCfgMgrClientMacAddress OBJECT-TYPE The MAC address used by this CPE on the cpe-mgr interface. | 1.3.6.1.4.1.5504.3.1.21.1.3.1.1.4 | MacAddress | read-only | current |
| cpeCfgMgrClientSysName OBJECT-TYPE Read only access to the sysName of this CPE. | 1.3.6.1.4.1.5504.3.1.21.1.3.1.1.5 | OCTET STRING (SIZE(0..32)) | read-only | current |
| cpeCfgMgrClientStatusObjects OBJECT-IDENTITY CPE Configuration Manager Client Status Objects. | 1.3.6.1.4.1.5504.3.1.21.1.3.1.2 | current | ||
| cpeCfgMgrClientState OBJECT-TYPE Current status of CPE Config Manager operations on this CPE. | 1.3.6.1.4.1.5504.3.1.21.1.3.1.2.1 | INTEGER {error(0), starting(1), dhcpRequesting(2), dhcpRenewing(3), dhcpShortLeaseWaiting(4), downloadingSoftware(5), downloadingWebUI(6), downloadingGenericConfig(7), downloadingSpecificConfig(8), installingSoftware(9), installingWebUI(10), installingGenericConfig(11), installingSpecificConfig(12), backingUpConfig(13), genericOperational(99), operational(100)} | read-only | current |
| cpeCfgMgrClientErrorDescription OBJECT-TYPE Textual description of the most recent error that may have occurred while downloading a file, upgrading the software, updating the configuration, or backing up the configuration for this CPE. | 1.3.6.1.4.1.5504.3.1.21.1.3.1.2.2 | OCTET STRING (SIZE(0..128)) | read-only | current |
| cpeCfgMgrClientCurrentSwVersion OBJECT-TYPE A text string containing the currently running software image version. This string is reported to the CO via DHCP for CPE Config Manager support. | 1.3.6.1.4.1.5504.3.1.21.1.3.1.2.3 | OCTET STRING (SIZE(0..32)) | read-only | current |
| cpeCfgMgrClientCurrentWebUIVersion OBJECT-TYPE A text string containing the currently installed WebUI version. This string is reported to the CO via DHCP for CPE Config Manager support. | 1.3.6.1.4.1.5504.3.1.21.1.3.1.2.4 | OCTET STRING (SIZE(0..32)) | read-only | current |
| cpeCfgMgrClientLastInstalledConfigFile OBJECT-TYPE A text string containing the configuration filename most recently installed by CPE Config Manager. This string is reported to the CO via DHCP for CPE Config Manager support. | 1.3.6.1.4.1.5504.3.1.21.1.3.1.2.5 | OCTET STRING (SIZE(0..32)) | read-only | current |
| cpeCfgMgrClientLastDwnldSrvrBasePath OBJECT-TYPE A text string containing the download server base path most recently used for uploading or downloading files for CPE Config Manager. This string is reported to the CO for config file validation. | 1.3.6.1.4.1.5504.3.1.21.1.3.1.2.6 | OCTET STRING (SIZE(0..32)) | read-only | current |
| cpeCfgMgrClientLastDwnldSrvrSpecificPath OBJECT-TYPE A text string containing the download server specific path most recently used for uploading or downloading files for CPE Config Manager. This string is reported to the CO for config file validation. | 1.3.6.1.4.1.5504.3.1.21.1.3.1.2.7 | OCTET STRING (SIZE(0..40)) | read-only | current |
| cpeCfgMgrClientUpdateObjects OBJECT-IDENTITY CPE Configuration Manager Client Update Objects. | 1.3.6.1.4.1.5504.3.1.21.1.3.1.3 | current | ||
| cpeCfgMgrClientRequiredUpdates OBJECT-TYPE This field indicates the current list of required updates this CPE needs to complete. The 'backup' bit tells the CPE to generate a config backup of the running config to the download storage area. software(0): Software image file must be updated. webUI(1): WebUI file must be updated. config(2): Config file must be updated. backup(3): CPE must backup its running config | 1.3.6.1.4.1.5504.3.1.21.1.3.1.3.1 | Bits {software(0), webUI(1), config(2), backup(3)} | read-write | current |
| cpeCfgMgrClientReceivedSwFilename OBJECT-TYPE A string specifying the software filename the CPE must download. The CPE will be required to download this file when the reportedCpeSoftwareVersion it reported to the CO device does not exactly match the requiredCpeSoftwareVersion in the cpeConfigMgrEntry. | 1.3.6.1.4.1.5504.3.1.21.1.3.1.3.2 | OCTET STRING (SIZE(0..32)) | read-write | current |
| cpeCfgMgrClientReceivedWebUIFilename OBJECT-TYPE A string specifying the WebUI filename the CPE must download. The CPE will be required to download this file when the reportedCpeWebUIVersion it reported to the CO device does not exactly match the requiredCpeWebUIVersion in the cpeConfigMgrEntry. | 1.3.6.1.4.1.5504.3.1.21.1.3.1.3.3 | OCTET STRING (SIZE(0..32)) | read-write | current |
| cpeCfgMgrClientReceivedGenericCfgFilename OBJECT-TYPE A string specifying the generic config filename for this CPE. The CPE must download this file if the reportedCpeConfigFilename it reported to the CO device doesn't exactly match either the requiredCpeGenericConfigFile in the cpeConfigMgrEntry or the cpeSpecificConfigFile in the cpeConfigMgrMemberEntry, and either no cpeCfgMgrClientReceivedSpecificCfgFilename was received from the CO or the download or use of the specific config file fails. | 1.3.6.1.4.1.5504.3.1.21.1.3.1.3.4 | OCTET STRING (SIZE(0..32)) | read-write | current |
| cpeCfgMgrClientReceivedSpecificCfgFilename OBJECT-TYPE A string specifying the specific config filename for this CPE. The CPE must download this file if the reportedCpeConfigFilename it reported to the CO device doesn't exactly match the cpeSpecificConfigFile in the cpeConfigMgrMemberEntry. | 1.3.6.1.4.1.5504.3.1.21.1.3.1.3.5 | OCTET STRING (SIZE(0..32)) | read-write | current |
| cpeCfgMgrClientForceUpdate OBJECT-TYPE Writable object causing the immediate update of the CPE. After initiating the requested update, this field reverts to the 'none' state. renewDhcp - Simply restarts the DHCP handshake. This could cause an update if the configuration on the CO device has changed. updateConfig - This resets any previous configuration information and restarts the DHCP handshake. This has the effect of forcing a download and install of the configuration file even if it was the same as the previously installed file. | 1.3.6.1.4.1.5504.3.1.21.1.3.1.3.6 | INTEGER {none(0), renewDhcp(1), updateConfig(2)} | read-write | current |
| cpeCfgMgrClientDownloadServerObjects OBJECT-IDENTITY CPE Configuration Manager Download Server Objects. | 1.3.6.1.4.1.5504.3.1.21.1.3.1.4 | current | ||
| cpeCfgMgrClientDwnldSrvrIP OBJECT-TYPE The IP address of the server hosting files for download by CPEs. This will likely be the ZMS server. | 1.3.6.1.4.1.5504.3.1.21.1.3.1.4.1 | IpAddress | read-write | current |
| cpeCfgMgrClientDwnldSrvrUsername OBJECT-TYPE Username the CPE uses when downloading files from the download server. | 1.3.6.1.4.1.5504.3.1.21.1.3.1.4.2 | OCTET STRING (SIZE(0..16)) | read-write | current |
| cpeCfgMgrClientDwnldSrvrPassword OBJECT-TYPE Password the CPE uses when downloading files from the download server. | 1.3.6.1.4.1.5504.3.1.21.1.3.1.4.3 | OCTET STRING (SIZE(0..16)) | read-write | current |
| cpeCfgMgrClientDwnldSrvrSecureMode OBJECT-TYPE The desired security mode to use for downloading files. It can be one of three values: 1 = do not use secure download methods (use ftp or tftp), 2 = use secure download methods (sftp), 3 = no preference. | 1.3.6.1.4.1.5504.3.1.21.1.3.1.4.4 | INTEGER {disabled(1), enabled(2), noPreference(3)} | read-write | current |
| cpeCfgMgrClientDwnldSrvrBasePath OBJECT-TYPE The base path location on the download server where update files are available. | 1.3.6.1.4.1.5504.3.1.21.1.3.1.4.5 | OCTET STRING (SIZE(0..32)) | read-write | current |
| cpeCfgMgrClientDwnldSpecificPath OBJECT-TYPE The specific path location on the download server where CPE specific files are available. This path is a sub-path of the base path. The total path is a concatenation of the two strings as follows: <base path>/<specific path> | 1.3.6.1.4.1.5504.3.1.21.1.3.1.4.6 | OCTET STRING (SIZE(0..40)) | read-write | current |
| cpeCfgMgrClientCoObjects OBJECT-IDENTITY CPE Configuration Manager Client CO Objects. | 1.3.6.1.4.1.5504.3.1.21.1.3.1.5 | current | ||
| cpeCfgMgrPublicIPAddress OBJECT-TYPE This is the Public side IP Address used by CPE Config Manager on the CO device. It is not necessarily the IP used by the CO to communicate with the CPE. | 1.3.6.1.4.1.5504.3.1.21.1.3.1.5.1 | IpAddress | read-write | current |
| cpeCfgMgrBaseProtocolPort OBJECT-TYPE Base protocol port used for NAT/PAT access of this CPE via the CO device. | 1.3.6.1.4.1.5504.3.1.21.1.3.1.5.2 | Integer32 | read-write | current |
| cpeCfgMgrSlot OBJECT-TYPE Slot identifier for the port on the CO device connected to this CPE. | 1.3.6.1.4.1.5504.3.1.21.1.3.1.5.3 | Integer32 | read-write | current |
| cpeCfgMgrPort OBJECT-TYPE Port identifier on the CO device slot connected to this CPE. | 1.3.6.1.4.1.5504.3.1.21.1.3.1.5.4 | Integer32 | read-write | current |
| cpeCfgMgrSubport OBJECT-TYPE Subport identifier on the CO device's port connected to this CPE. | 1.3.6.1.4.1.5504.3.1.21.1.3.1.5.5 | Integer32 | read-write | current |
| cpeCfgMgrInterfaceName OBJECT-TYPE Interface name on the CO device connected to this CPE. | 1.3.6.1.4.1.5504.3.1.21.1.3.1.5.6 | OCTET STRING (SIZE(0..32)) | read-write | current |
| cpeCfgMgrClientConformance OBJECT-IDENTITY CPE Configuration Manager Client Conformance. | 1.3.6.1.4.1.5504.3.1.21.1.3.2 | current | ||
| cpeCfgMgrClientGroups OBJECT-IDENTITY CPE Configuration Manager Client conformance groups. | 1.3.6.1.4.1.5504.3.1.21.1.3.2.1 | current | ||
| cpeCfgMgrClientCompliances OBJECT-IDENTITY CPE Configuration Manager Client compliances. | 1.3.6.1.4.1.5504.3.1.21.1.3.2.2 | current |
Notifications
| Name | OID | Status |
|---|---|---|
| cpeConfigMgrClientOperational NOTIFICATION-TYPE Trap flagging a CPE as operational. This means the listed CPE did not need any image or configuration updates and was granted the operational lease time on its IP. | 1.3.6.1.4.1.5504.3.1.21.1.2.0.1 | current |
| cpeConfigMgrClientDysfunctional NOTIFICATION-TYPE Trap flagging a CPE as having repeated update errors. This means the listed CPE repeatedly attempted to perform an update and failed. At this point the CPE is granted a long lease time on its IP and no required updates. This will allow other CPEs an opportunity to update. | 1.3.6.1.4.1.5504.3.1.21.1.2.0.2 | current |
| cpeConfigMgrMismatchType NOTIFICATION-TYPE This trap from CPE Config Manager on a CO device is sent when a CPE's reportedCpeType does not match any cpeType's defined by cpeConfigMgr's of the same cpeConfigMgrGroup. This trap indicates a configuration error that needs attention. | 1.3.6.1.4.1.5504.3.1.21.1.2.0.3 | current |
| cpeConfigMgrMismatchSoftwareVersion NOTIFICATION-TYPE This trap from CPE Config Manager on a CO device is sent when the software version reported by the CPE does not agree with the software version required by the cpeConfigMgr. | 1.3.6.1.4.1.5504.3.1.21.1.2.0.4 | current |
| cpeConfigMgrMismatchWebUIVersion NOTIFICATION-TYPE This trap from CPE Config Manager on a CO device is sent when the WebUI version reported by the CPE does not agree with the WebUI version required by the cpeConfigMgr | 1.3.6.1.4.1.5504.3.1.21.1.2.0.5 | current |
| cpeConfigMgrMismatchConfigFile NOTIFICATION-TYPE This trap from CPE Config Manager on a CO device is sent when the config filename reported by the CPE does not agree with either the cpeGenericConfigFile required by the cpeConfigMgr or the cpeSpecificConfigFile required by the cpeConfigMgrMember. The comparison of the generic config file includes matching the cpeConfigMgrDownloadBasePath with the base path reported by the CPE. The comparison of the specific config file included matching cpeConfigMgrDownloadBasePath with the base path reported by the CPE and matching cpeSpecificDownloadPath with the specific path reported by the CPE. | 1.3.6.1.4.1.5504.3.1.21.1.2.0.6 | current |
| cpeConfigMgrUpdateError NOTIFICATION-TYPE This trap from CPE Config Manager on a CO device is sent if it detects an update to a CPE failed. | 1.3.6.1.4.1.5504.3.1.21.1.2.0.7 | current |
| cpeCfgMgrClientSoftwareDownloadFailed NOTIFICATION-TYPE Trap sent by a CPE when the download of the software image initiated by CPE Config Manager fails. | 1.3.6.1.4.1.5504.3.1.21.1.3.0.1 | current |
| cpeCfgMgrClientSoftwareInstallFailed NOTIFICATION-TYPE Trap sent by a CPE when the installation of the software image as required by CPE Config Manager fails. | 1.3.6.1.4.1.5504.3.1.21.1.3.0.2 | current |
| cpeCfgMgrClientWebUIDownloadFailed NOTIFICATION-TYPE Trap sent by a CPE when the download of the WebUI file initiated by CPE Config Manager fails. | 1.3.6.1.4.1.5504.3.1.21.1.3.0.3 | current |
| cpeCfgMgrClientWebUIInstallFailed NOTIFICATION-TYPE Trap sent by a CPE when the installation of the WebUI file required by CPE Config Manager fails. | 1.3.6.1.4.1.5504.3.1.21.1.3.0.4 | current |
| cpeCfgMgrClientConfigDownloadFailed NOTIFICATION-TYPE Trap sent by a CPE when the download of a configuration file initiated by CPE Config Manager fails. | 1.3.6.1.4.1.5504.3.1.21.1.3.0.5 | current |
| cpeCfgMgrClientConfigUpdateFailed NOTIFICATION-TYPE Trap sent by a CPE when updating to a configuration file required by CPE Config Manager fails. | 1.3.6.1.4.1.5504.3.1.21.1.3.0.6 | current |
| cpeCfgMgrClientConfigBackupFailed NOTIFICATION-TYPE Trap sent by a CPE when the upload of a configuration file initiated by CPE Config Manager fails. | 1.3.6.1.4.1.5504.3.1.21.1.3.0.7 | current |
| cpeCfgMgrClientLevelReady NOTIFICATION-TYPE Trap sent by a CPE reporting its configuration level after it has completed all updates available from CPE Config Manager. | 1.3.6.1.4.1.5504.3.1.21.1.3.0.8 | current |
| cpeCfgMgrClientConfigBackupDone NOTIFICATION-TYPE Trap sent by a CPE when the upload of a configuration file initiated by CPE Config Manager completes successfully. | 1.3.6.1.4.1.5504.3.1.21.1.3.0.9 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| cpeMgrGlobalGroup OBJECT-GROUP Global parameters used by the CPE Manager application. | 1.3.6.1.4.1.5504.3.1.21.1.1.2.1.1 | current |
| cpeMgrGlobalCompliance MODULE-COMPLIANCE The compliance statement for managed CPE Manager global entities. | 1.3.6.1.4.1.5504.3.1.21.1.1.2.2.1 | current |
| cpeConfigMgrObjectGroup OBJECT-GROUP A common set of objects used to maintain software version and generic configuration for a specific type of a group member CPE. | 1.3.6.1.4.1.5504.3.1.21.1.2.2.1.1 | current |
| cpeConfigMgrDownloadServerGroup OBJECT-GROUP Objects used to define a download server used by CPEs managed by CPE Configuration manager. | 1.3.6.1.4.1.5504.3.1.21.1.2.2.1.2 | current |
| cpeConfigMgrMemberObjectGroup OBJECT-GROUP A unique set of objects connecting a CPE link to a CPE Config Manager, assigning a unique configuration to the CPE, and maintaining a configuration status. | 1.3.6.1.4.1.5504.3.1.21.1.2.2.1.3 | current |
| cpeConfigMgrNotificationsObjectGroup NOTIFICATION-GROUP Notifications for various cpeConfigMgr events and errors. | 1.3.6.1.4.1.5504.3.1.21.1.2.2.1.4 | current |
| cpeConfigMgrCompliance MODULE-COMPLIANCE The compliance statement for managed entities supporting CPE Configuration Manager. | 1.3.6.1.4.1.5504.3.1.21.1.2.2.2.1 | current |
| cpeCfgMgrClientObjectGroup OBJECT-GROUP These objects are required for CPEs supporting CPE Configuration Manager controls. | 1.3.6.1.4.1.5504.3.1.21.1.3.2.1.1 | current |
| cpeCfgMgrClientNotificationsGroup NOTIFICATION-GROUP Notifications from a CPE being managed by CPE Config manager. | 1.3.6.1.4.1.5504.3.1.21.1.3.2.1.2 | current |
| cpeCfgMgrClientCompliance MODULE-COMPLIANCE CPE Config Compliance. | 1.3.6.1.4.1.5504.3.1.21.1.3.2.2.1 | current |