MIBs Depot

CONTIVITY-TRAPS-V1-MIB

Registered at
1.3.6.1.4.1.2505.1.0
1.3.6.1.4.1.2505.1.1
1.3.6.1.4.1.2505.1.2
1.3.6.1.4.1.2505.1.3
1.3.6.1.4.1.2505.1.4
1.3.6.1.4.1.2505.1.5
1.3.6.1.4.1.2505.1.14
Last updated
1906-04-06 23:00
Organization
Nortel
Revisions
1900-05-12 20:00, 1900-06-28 18:00, 1900-06-28 21:00, 1900-08-10 15:00, 1900-06-18 22:00, 1901-02-27 23:00, 1901-03-26 23:00, 1901-05-10 23:00
Namespace
nortel
Source file
CONTIVITY-TRAPS-V1-MIB
Digest
sha256:973c354b642e46d66735138eb5ee7fc3e92f766e24ff0995253a517fa584f40c

Description

This MIB defines the traps, and bind objects used in the traps, that are sent by the VPN Router.

Contact

support@nortel.com Postal: Nortel 600 Technology Park Drive Billerica, MA 01821 Tel: +1 978 670 8888 E-Mail: support@nortel.com

Imports

FromSymbols
IF-MIBifAdminStatus, ifDescr, ifIndex, ifOperStatus, ifType
NEWOAK-MIBcontivity
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-MIBsnmp, sysName, sysObjectID
SNMPv2-SMIIpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

CONTIVITY-TRAPS-V1-MIB
IANAifType-MIB
IF-MIB
NEWOAK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
FirewallPolicyType_ces
type
FirewallRuleAction_ces
type
FirewallRuleType_ces
type
IfReasonForStatus_ces
type
PortLocation_ces
type

Objects

NameOIDSyntaxAccessStatus
hardwareCESTrapInfo
OBJECT-IDENTITY
1.3.6.1.4.1.2505.1.1
hardDisk1Status
OBJECT-TYPE
Hard Disk Number 1 Status. Possible Values: Warning: Hard Disk 1 : Device /ide1/ not available Warning: Hard Disk 1 : Utilization exceeds 75%% on /ide1/ Alert: Hard Disk 1 : Utilization exceeds 87.5%% on /ide1/
1.3.6.1.4.1.2505.1.1.1DisplayStringread-onlymandatory
hardDisk0Status
OBJECT-TYPE
Hard Disk Number 0 Status. Possible Values: Warning: Hard Disk 0 : Device /ide0/ not available Warning: Hard Disk 0 : Utilization exceeds 75%% on /ide0/ Alert: Hard Disk 0 : Utilization exceeds 87.5%% on /ide0/
1.3.6.1.4.1.2505.1.1.2DisplayStringread-onlymandatory
memoryUsage
OBJECT-TYPE
Memory Usage Status. Possible Values: Warning: Memory Usage : Utilization exceeds 75% Alert: Memory Usage : Utilization exceeds 87.5%
1.3.6.1.4.1.2505.1.1.3DisplayStringread-onlymandatory
lanCardStatus
OBJECT-TYPE
Status of any LAN cards on the system. Possible Values: Please note that X corresponds to the Xth slot in the system. Please note that Y corresponds to the relative position of the port on the card in the Xth slot in the system. Warning: LAN on Slot X Interface Y: Device feiX has no IP address; Warning: LAN on Slot X Interface Y: Device feiX disabled; Alert: LAN on Slot X Interface Y: Device feiX down; Alert: LAN on Slot X Interface Y: Device feiX Invalid Device X The Alert status above indicates that the interface has no link when it should. Possible causes are improper connection speeds and duplex, improper cabling or a configuration issue.
1.3.6.1.4.1.2505.1.1.4DisplayStringread-onlymandatory
cpuTwoStatus
OBJECT-TYPE
Status of second CPU. Possible Values: Alert: CPU 2: Program load failed; Alert: CPU 2: Bootup did not complete; Alert: CPU 2: Communication lost; Alert: CPU 2: Failed. Reason unknown; Each of these indicates that the application CPU is not functioning correctly. The system will continue to function without the application processor. This can only be sent from a system with multiple CPUs. See the Admin Guide for a list of systems that contain multiple CPUs. The CES will emit an audible alarm and the networking performance will be degraded. A Nortel support representative should be contacted if rese ing the CES does not correct the problem. The effect is the same in each case. The system will be running with only one CPU.
1.3.6.1.4.1.2505.1.1.5DisplayStringread-onlymandatory
fanOneStatus
OBJECT-TYPE
Status of the first CPU fan. Possible Values: Alert: CPU One Fan: Fan not functioning; This indicates that the fan on the primary processor is running either below the specified speed or not running at all. If a fan is not working correctly, it must be fixed as soon as possible or damage may result. This is a high priority event which can prove catastrophic to the processor as well as the system. This trap can only be sent by systems which contain an actual fan on the primary CPU.
1.3.6.1.4.1.2505.1.1.6DisplayStringread-onlymandatory
fanTwoStatus
OBJECT-TYPE
Status of the second CPU fan Possible Values: Alert: CPU Two Fan: Fan not functioning; This indicates that the fan on the auxiliary processor is running either below the specified speed or not running at all. If a fan is not working correctly, it must be fixed as soon as possible or damage may result. This is a high priority event which can prove catastrophic to the processor as well as the system. This trap can only be sent by systems which contain an actual fan on the auxiliary CPU.
1.3.6.1.4.1.2505.1.1.7DisplayStringread-onlymandatory
chassisFanStatus
OBJECT-TYPE
Status of the chassis fan. Possible Values: Alert: Chassis Fan: Fan not functioning; Alert: Chassis Fan 2: Fan not functioning; This indicates that one of the chassis fans is running either below the specified range of speed or not running at all. If a fan is not working correctly, it must be fixed as soon as possible or damage may result. If either of the fans are not working properly, the box must be looked at by a service technician as soon as possible. Not doing so will result in overheating of the system, improper system operation, and possible component failure.
1.3.6.1.4.1.2505.1.1.8DisplayStringread-onlymandatory
fiveVoltsPositive
OBJECT-TYPE
Status of +5 Volt power. Possible Values: Alert: Voltage 5 V Plus: Voltage out of range; The supplied voltage to the system is not within the the specified range for that particular voltage. Certain platforms do not supply or monitor some of these voltages. See the Health Check section of the Admin Guide for a description of which platforms monitor which voltages. This is a major problem and the box should be looked at by a qualified Nortel representative as soon as possible. Correct operation of the system is not guaranteed while in this state. Certain platforms do not supply or monitor some of these voltages. See the Health Check section of the Admin Guide for a description of which platforms monitor which voltages.
1.3.6.1.4.1.2505.1.1.9DisplayStringread-onlymandatory
fiveVoltsMinus
OBJECT-TYPE
Status of -5 Volt power. Possible Values: Alert: Voltage 5 V Minus: Voltage out of range; The supplied voltage to the system is not within the the specified range for that particular voltage. Certain platforms do not supply or monitor some of these voltages. See the Health Check section of the Admin Guide for a description of which platforms monitor which voltages. This is a major problem and the box should be looked at by a qualified Nortel representative as soon as possible. Correct operation of the system is not guaranteed while in this state. Certain platforms do not supply or monitor some of these voltages. See the Health Check section of the Admin Guide for a description of which platforms monitor which voltages.
1.3.6.1.4.1.2505.1.1.10DisplayStringread-onlymandatory
threeVoltsPositive
OBJECT-TYPE
Status of +3 Volt power. Possible Values: Alert: Voltage 3.3 V Plus: Voltage out of range; The supplied voltage to the system is not within the the specified range for that particular voltage. Certain platforms do not supply or monitor some of these voltages. See the Health Check section of the Admin Guide for a description of which platforms monitor which voltages. This is a major problem and the box should be looked at by a qualified Nortel representative as soon as possible. Correct operation of the system is not guaranteed while in this state. Certain platforms do not supply or monitor some of these voltages. See the Health Check section of the Admin Guide for a description of which platforms monitor which voltages.
1.3.6.1.4.1.2505.1.1.11DisplayStringread-onlymandatory
twoDotFiveVA
OBJECT-TYPE
Status of 2.5VA power. Possible Values: Alert: Voltage 2.5 VA: Voltage out of range; This is the voltage supplied to the primary processor. The supplied voltage to the system is not within the the specified range for that particular voltage. Certain platforms do not supply or monitor some of these voltages. See the Health Check section of the Admin Guide for a description of which platforms monitor which voltages. This is a major problem and the box should be looked at by a qualified Nortel representative as soon as possible. Correct operation of the system is not guaranteed while in this state. Certain platforms do not supply or monitor some of these voltages. See the Health Check section of the Admin Guide for a description of which platforms monitor which voltages.
1.3.6.1.4.1.2505.1.1.12DisplayStringread-onlymandatory
twoDotFiveVB
OBJECT-TYPE
Status of 2.5VB power. Possible Values: Alert: Voltage 2.5 VB: Voltage out of range; This is the voltage supplied to the seconary processor. The supplied voltage to the system is not within the the specified range for that particular voltage. Certain platforms do not supply or monitor some of these voltages. See the Health Check section of the Admin Guide for a description of which platforms monitor which voltages. This is a major problem and the box should be looked at by a qualified Nortel representative as soon as possible. Correct operation of the system is not guaranteed while in this state. Certain platforms do not supply or monitor some of these voltages. See the Health Check section of the Admin Guide for a description of which platforms monitor which voltages.
1.3.6.1.4.1.2505.1.1.13DisplayStringread-onlymandatory
twelveVoltsPositive
OBJECT-TYPE
Status of +12 Volt power. Possible Values: Alert: Voltage 12 V Plus: Voltage out of range; The supplied voltage to the system is not within the the specified range for that particular voltage. Certain platforms do not supply or monitor some of these voltages. See the Health Check section of the Admin Guide for a description of which platforms monitor which voltages. This is a major problem and the box should be looked at by a qualified Nortel representative as soon as possible. Correct operation of the system is not guaranteed while in this state. Certain platforms do not supply or monitor some of these voltages. See the Health Check section of the Admin Guide for a description of which platforms monitor which voltages.
1.3.6.1.4.1.2505.1.1.14DisplayStringread-onlymandatory
twelveVoltsMinus
OBJECT-TYPE
Status of -12 Volt power. Possible Values: Alert: Voltage 12 V Minus: Voltage out of range; The supplied voltage to the system is not within the the specified range for that particular voltage. Certain platforms do not supply or monitor some of these voltages. See the Health Check section of the Admin Guide for a description of which platforms monitor which voltages. This is a major problem and the box should be looked at by a qualified Nortel representative as soon as possible. Correct operation of the system is not guaranteed while in this state. Certain platforms do not supply or monitor some of these voltages. See the Health Check section of the Admin Guide for a description of which platforms monitor which voltages.
1.3.6.1.4.1.2505.1.1.15DisplayStringread-onlymandatory
normalTemperature
OBJECT-TYPE
Status of normal temperature reading. Possible Values: Alert: Normal Temperature: Normal temperature out of range; This indicates that the box is running above its rated normal operating temperature. This may be the result of an improperly working fan or a high ambient temperature. The box is not guaranteed to run properly while running above the normal operating temperature range. Performance will be degraded. Not taking action to correct this situation can result in component failure. Do not rely on waiting for the criticalTemperatureTrap as that is only supported by certain platforms.
1.3.6.1.4.1.2505.1.1.16DisplayStringread-onlymandatory
criticalTemperature
OBJECT-TYPE
Status of critical temperature reading. Possible Values: Alert: Critical Temperature: Critial temperature out of range; This indicates that the box is running at a critically high temperature above the normal operating range. This is only supported on certain platforms. See the Admin Guide for a list of platforms which support this. The box must be shut down immediately. Component failure may already have occurred. If the reason for such a high operating temperature cannot be determined, contact a qualified Nortel representative.
1.3.6.1.4.1.2505.1.1.17DisplayStringread-onlymandatory
chassisIntrusion
OBJECT-TYPE
The chassis intrusion sensor indicates that the unit has been opened. Possible Values: Alert: Intrusion: Box has been opened; The cover to the CES has been opened or is in the process of being opened. This indicates a possible physical security intrusion. The system will continue to operate while the box is opened. Check to insure that no unauthorized persons have opened the unit.
1.3.6.1.4.1.2505.1.1.18DisplayStringread-onlymandatory
dualPowerSupply
OBJECT-TYPE
Status of the redundant power supplies. Possible Values: Alert: Dual Power Supply: Redundant supply faulted This indicates that, on systems with redundant power supplies, one of the power supplies is not working. This trap can only be sent from systems which have redundant power supplies. The system will continue to run with only one power supply working. A new power supply must be obtained via an authorized Nortel representative as quickly as possible. This will help reduce the risk window of system failure in the event that the working power supply ceases to function.
1.3.6.1.4.1.2505.1.1.19DisplayStringread-onlymandatory
t1WANStatus
OBJECT-TYPE
Status of T1 WAN card(s). Possible Values: For Wanic support: Alert: Invalid Device X Warning: Device WanicX disabled Alert: Device WanicX down Warning: Device WanicX not initialized Warning: Device WanicX PPP negotiating Alert: Device WanicX PPP down Alert: Device WanicX FR no support Alert: Device WanicX Unknown DL For T1: Alert: Invalid Device X Warning: Device LMCDTEX disabled Alert: Device LMCDTEX down Warning: Device LMCDTEX not initialized For CSU/DSU: Alert: Invalid Device X Warning: Device LMCCDX disabled Alert: Device LMCCDX down Warning: Device LMCCDX not initialized
1.3.6.1.4.1.2505.1.1.20DisplayStringread-onlymandatory
t3WANStatus
OBJECT-TYPE
Status of T3 WAN card Possible Values: Alert: Invalid Index X Warning: Device HSSIX disabled Alert: Device HSSIX down Warning: Device HSSIX not initialized Alert: Device HSSIX PPP down Warning: Device HSSIX PP initializing
1.3.6.1.4.1.2505.1.1.21DisplayStringread-onlymandatory
hwAccelStatus
OBJECT-TYPE
Status of hardware accelerator card.
1.3.6.1.4.1.2505.1.1.22DisplayStringread-onlymandatory
v90WANStatus
OBJECT-TYPE
Status of V.90 Interface card Possible Values: Please note that X corresponds to the unit number of the card. Alert: V.90 Invalid index X Disabled: Device IntModem-X disabled Healthy: Device IntModem-X: PPP is UP. Alert: Device IntModem-X down Warning: Device IntModem-X not initialized Alert: Device IntModem-X: Call is UP. Internal Error. Warning: Device IntModem-X is Down. Last dial-out attempt FAILED. Healthy: Device IntModem-X is Down (No Active calls) Warning: Device IntModem-X is in an UNKNOWN state
1.3.6.1.4.1.2505.1.1.24DisplayStringread-onlymandatory
briWANStatus
OBJECT-TYPE
Status of ISDN BRI Interface card Possible Values: Please note that X corresponds to the unit number of the card. Alert: BRI Invalid index X Alert: Device BRI-X not Responding. Needs Host Reboot. Disabled: Device BRI-X disabled Alert: Device BRI-X down Warning: Device BRI-X not initialized Healthy: Device BRI-X: PPP is UP. Alert: Device BRI-X: Call is UP. Internal Error. Warning: Device BRI-X is Down. Last dial-out attempt FAILED. Healthy: Device BRI-X is Down (No Active calls) Alert: Device BRI-X is in an UNKNOWN state
1.3.6.1.4.1.2505.1.1.25DisplayStringread-onlymandatory
serUartStatus
OBJECT-TYPE
Status of Serial (COM) port/interface Possible Values: Please note that X corresponds to the unit number of the serial interface Alert: COM port Invalid index X Healthy: Device COMX is set for Serial Menu. Disabled: Device COMX disabled Warning: Device COMX not initialized Healthy: Device COMX: PPP is UP. Alert: Device COMX: Call is UP. Internal Error. Warning: Device COMX is Down. Last dial-out attempt FAILED. Healthy: Device COMX is Down (No Active calls) Alert: Device COMX is in an UNKNOWN state
1.3.6.1.4.1.2505.1.1.26DisplayStringread-onlymandatory
adslWANStatus
OBJECT-TYPE
Status of ADI ADSL card Possible Values: Please note that X corresponds to the unit number of the serial interface Alert: Invalid index X Alert: Device ADIADSLX off line Disabled: Device ADIADSLX disabled Alert: Device ADIADSLX down Warning: Device ADIADSLX not initialized Healthy: Device ADIADSLX up
1.3.6.1.4.1.2505.1.1.27DisplayStringread-onlymandatory
serverCESTrapInfo
OBJECT-IDENTITY
1.3.6.1.4.1.2505.1.2
radiusAcctServer
OBJECT-TYPE
Status of External Radius Accounting Server. Possible Values: Warning: RADIUS Accounting Server: Server not configured Alert: RADIUS Accounting Server: Error Alert: RADIUS Accounting Server: Not Configured
1.3.6.1.4.1.2505.1.2.1DisplayStringread-onlymandatory
backupServer
OBJECT-TYPE
Status of External Disk Backup Server. Possible Values: Warning: Auto Backup Servers: Server not configured. Warning: Auto Backup Servers: Can't backup to xxx yyy zzz Alert: Auto Backup Servers: Can't backup to xxx yyy zzz Can't backup to xxx yyy zzz is issued as an alert when none of the servers can be reached.
1.3.6.1.4.1.2505.1.2.2DisplayStringread-onlymandatory
diskRedundency
OBJECT-TYPE
Status of Local Disk Redundency. Possible Values: Alert: Disk Redundancy: Not Configured Alert: Disk Redundancy: Error
1.3.6.1.4.1.2505.1.2.3DisplayStringread-onlymandatory
intLDAPServer
OBJECT-TYPE
Status of Internal LDAP Server. Possible Values: Warning : Internal LDAP Server : Restore in progress Alert : Internal LDAP Server : Server is down
1.3.6.1.4.1.2505.1.2.4DisplayStringread-onlymandatory
loadBalancingServer
OBJECT-TYPE
Status of Load Balancing Server. Possible Values: Disabled: Load Balancing Service: Server not enabled; Warning: Load Balancing Service: Timed out waiting for response from server;
1.3.6.1.4.1.2505.1.2.5DisplayStringread-onlymandatory
dnsServer
OBJECT-TYPE
Status of DNS Server. Possible Values: Warning: DNS Servers : Error Warning: DNS Servers : Operational Alert: DNS Servers : Configured Alert: DNS Servers : Error The values have the following meaning: Warning: DNS Servers : Error -- SysInitCls::InitComplete failed Warning: DNS Servers : Operational -- At least one of the servers is reachable Alert: DNS Servers : Configured -- All servers configured, but none are reachable. Alert: DNS Servers : Error --
1.3.6.1.4.1.2505.1.2.6DisplayStringread-onlymandatory
snmpServer
OBJECT-TYPE
Status of SNMP Server. Possible Values: Warning: SNMP Servers : Error Warning: SNMP Servers : Can't reach xxx.xxx.xxx.xxx or yyy.yyy.yyy.yyy Alert: SNMP Servers : Error The values have the following meaning: Warning: SNMP Servers : Error -- SysInitCls::InitComplete failed Alert: SNMP Servers : Error -- AT least one server configured, but none are reachable.
1.3.6.1.4.1.2505.1.2.7DisplayStringread-onlymandatory
ipAddressPool
OBJECT-TYPE
Status of the IP address pool. Possible Values: Warning: IP Address Pool : Reserved address count is low. Warning: IP Address Pool : DHCP server(s) unavailable Alert: IP Address Pool : Server is down Alert: IP Address Pool : Not Configured Alert: IP Address Pool : No IP address available. Alert: IP Address Pool : Reserved address count is low. Alert: IP Address Pool : Associated system task failed. Alert: IP Address Pool : Server not configured Alert: IP Address Pool : Error The values have the following meaning: Warning: IP Address Pool : Reserved address count is low. -- Haven't hit desired cache size yet. Alert: IP Address Pool : Server is down -- SysInitCls::InitComplete failed Alert: IP Address Pool : Not Configured -- Task failed sanity check. Alert: IP Address Pool : No IP address available. -- No addresses in BOUND state. Alert: IP Address Pool : Associated system task failed. Alert: IP Address Pool : Server not configured Alert: IP Address Pool : Error
1.3.6.1.4.1.2505.1.2.8DisplayStringread-onlymandatory
extLDAPServer
OBJECT-TYPE
Status of External LDAP Server. Possible Values: Warning: External LDAP Servers : Server is down Alert: External LDAP Servers : Server is down The values have the following meaning: Warning: External LDAP Servers : Server is down -- One server is down Alert: External LDAP Servers : Server is down -- All servers are down
1.3.6.1.4.1.2505.1.2.9DisplayStringread-onlymandatory
radiusAuthServer
OBJECT-TYPE
Status of Radius Authentication Server. Possible Values: Warning: RADIUS Authentication Servers : Error Alert: RADIUS Authentication Servers : Error The values have the following meaning: Warning: RADIUS Authentication Servers : Error -- At least one server is available Alert: RADIUS Authentication Servers : Error -- No servers are available
1.3.6.1.4.1.2505.1.2.10DisplayStringread-onlymandatory
certificateServer
OBJECT-TYPE
Status of Certificates Validity. Possible Values: Alert: Certificates Validity: All certificates are going to expire/expired; Warning: Certificates Validity: One/more certificate is invalid; Disabled: Certificates Validity: No certificate defined;
1.3.6.1.4.1.2505.1.2.11DisplayStringread-onlymandatory
extLDAPAuthServer
OBJECT-TYPE
Status of External LDAP Authentication Server. Possible Values: Warning: External LDAP Authentication Server: Server is down(indicates at least one server is not reachable and at least one server is reachable); Alert: External LDAP Authentication Server: Server is down(indicates all servers are not reachable);
1.3.6.1.4.1.2505.1.2.12DisplayStringread-onlymandatory
cmpServer
OBJECT-TYPE
Status of CMP Server. Possible Values: One/more Certificate Requests error: there is at least one request error; One/more Certificate Requests processing: there is at least one request in processing; No Certificate Requests submitted: there is no request sent;
1.3.6.1.4.1.2505.1.2.13DisplayStringread-onlymandatory
dhcpServer
OBJECT-TYPE
Status of DHCP Server. Possible Values: Disabled: DHCP Server is Disabled Alert: DHCP Server is NOT configured Alert: DHCP Server is configured and operational, Using backup config Alert: No IP Address available for subnet Alert: DHCP Server is configured and server is DOWN Healthy: DHCP Server is Operational Warning: Subnet low on IP Addresses Warning: DHCP Server Initializing Warning: DHCP Server is Enabled, but status Unknown cannot be determined
1.3.6.1.4.1.2505.1.2.14DisplayStringread-onlymandatory
sshServer
OBJECT-TYPE
Status of SSH Server. Possible Values: Disabled : -- SSH Server is Disabled Healthy : -- SSH Server is Operational Warning : -- SSH Server is Restarting Warning : -- SSH Server is Initializing Warning : -- SSH Server is Unknown Alert : -- SSH Server is Down
1.3.6.1.4.1.2505.1.2.15DisplayStringread-onlymandatory
ntpServer
OBJECT-TYPE
Status of NTP Server. Possible Values: Disabled : -- NTP server is globally disabled. Healthy : -- NTP server operational. Warning : -- Frequency correction. Warning : -- Frenquncy set. Warning : -- Time set. Warning : -- Spike detected. Warning : -- Clock synchronized. Warning : -- NTP initialized - not synchronized. Warning : -- Clock never set.
1.3.6.1.4.1.2505.1.2.16DisplayStringread-onlymandatory
ospfServer
OBJECT-TYPE
Status of OSPF Server. Possible Values: Disabled : -- OSPF is globally disabled Warning : -- OSPF tunnel local addr A.B.C.D remote addr A.B.C.D is DOWN Warning : -- OSPF interface A.B.C.D is DOWN Alert : -- No connection to Routing Table Manager Alert : -- No connection to Routing Policy Service Healthy : -- Operational
1.3.6.1.4.1.2505.1.2.17DisplayStringread-onlymandatory
clipServer
OBJECT-TYPE
Status of Circuitless IP. Possible Values: Disabled : -- CLIP is Disabled Healthy : -- CLIP is operational
1.3.6.1.4.1.2505.1.2.18DisplayStringread-onlymandatory
dhcprelayServer
OBJECT-TYPE
Status of DHCP Relay Server. Possible Values: Alert : -- DHCP Relay requires reboot to start Alert : -- DHCP Relay task does not exist Alert : -- DHCP Relay task is suspended Healthy : -- DHCP Relay is up
1.3.6.1.4.1.2505.1.2.19DisplayStringread-onlymandatory
gdsServer
OBJECT-TYPE
Status of Global Demand Services Services. Possible Values: Healthy : -- Global Demand Services operational. Disabled : -- Global Demand Services disabled.
1.3.6.1.4.1.2505.1.2.20DisplayStringread-onlymandatory
demandintfServer
OBJECT-TYPE
Status of Demand Interface. Possible Values: Healthy : -- Demand Interface Connected. Healthy : -- Demand Interface Connecting. Healthy : -- Demand Interface Activated. Healthy : -- Demand Interface Idle. Disabled : -- Demand Interface Disabled.
1.3.6.1.4.1.2505.1.2.21DisplayStringread-onlymandatory
crlServer
OBJECT-TYPE
Status of CRL Server. Possible Values: Healthy : -- All Certificates are Valid Alert : -- One/more certificate is expired Warning : -- One/more certificate is going to expire Warning : -- Duplicate CA certs detected on the switch. Disabled : -- No certificate defined
1.3.6.1.4.1.2505.1.2.22DisplayStringread-onlymandatory
ocspServer
OBJECT-TYPE
Status of OCSP Server. Possible Values: Disabled : -- No OCSP server configured Alert : -- All OCSP servers are down. Cert:%s Warning : -- At least one server is down. Cert:%s Warning : -- OCSP is enabled but not configured. Cert:%s Healthy : -- All servers are up
1.3.6.1.4.1.2505.1.2.23DisplayStringread-onlymandatory
serviceCESTrapInfo
OBJECT-IDENTITY
1.3.6.1.4.1.2505.1.3
netBuffers
OBJECT-TYPE
Network buffer usage. Possible Values: Warning: Buffer Usage : Utilization exceeds 75% Alert: Buffer Usage : Utilization exceeds 87.5%
1.3.6.1.4.1.2505.1.3.1DisplayStringread-onlymandatory
fireWall
OBJECT-TYPE
Status of internal firewall. Possible Values: Disabled: Firewall: Firewall disabled; Disabled: Firewall: Firewall stopped; Warning: Firewall: Current Firewall is %s. Reboot is required to start %s; Warning: Firewall: Firewall state is not known!; Warning: Firewall: Daemon loading policy; Alert: Firewall: Firewall requires reboot to start; Alert: Firewall: Daemon task does not exist; Alert: Firewall: Daemon task is suspended; The values have the following meaning: -- The first two possible values are common to all firewalls. Disabled: Firewall: Firewall disabled; Warning: Firewall: Current Firewall is %s. Reboot is required to start %s; -- The firewall type (Contivity / CheckPoint) has been changed, but for it -- to take effect, the VPN Router must be restarted. -- Contivity Firewall specific values. Warning: Firewall: Firewall state is not known!; -- The Contivity firewall's -- state cannot be determined. -- CheckPoint Firewall specific values. Disabled: Firewall: Firewall stopped; Warning: Firewall: Daemon loading policy; Alert: Firewall: Firewall requires reboot to start; Alert: Firewall: Daemon task does not exist; Alert: Firewall: Daemon task is suspended;
1.3.6.1.4.1.2505.1.3.2DisplayStringread-onlymandatory
fipsStatus
OBJECT-TYPE
Status of FIPS. Possible Values: Warning: FIPS: Random generator test failed; Warning: FIPS: DESMAC check on executables Failed; Warning: FIPS: DES KAT Test Failed; Warning: FIPS: SHA1 Self Test Failed; Alert: FIPS: status not known;
1.3.6.1.4.1.2505.1.3.3DisplayStringread-onlymandatory
licensingStatus
OBJECT-TYPE
Status of temporary SW Licenses. Possible Values: Warning: Licensing: Temporary key will expire within 5 days; Alert: Licensing: Temporary key has expired;
1.3.6.1.4.1.2505.1.3.4DisplayStringread-onlymandatory
natStatus
OBJECT-TYPE
Status of Network Address Translator. Possible Values: Disabled: NAT: NAT disabled; Warning: NAT: Reboot is required to start Interface NAT; Warning: NAT: NAT state is not known!; Alert: NAT: All Addresses in the Address Translation pool are used; Alert: NAT: LDAP policy parse failed - Using system default policy; The values have the following meaning: -- The first two possible values are common to all firewalls. Disabled: NAT: NAT disabled; Existing NAT sessions are not deleted, but -- no new address bindings are created for Interface NAT. Branch Office NAT -- is not affected. Warning: NAT: Reboot is required to start Interface NAT; -- To take effect, the VPN Router must be restarted.
1.3.6.1.4.1.2505.1.3.5DisplayStringread-onlymandatory
antiSpoofingStatus
OBJECT-TYPE
Status of Anti Spoofing Feature. Possible Values: Disabled: Anti-Spoofing is Disabled; Warning: Anti-Spoofing : Packets Dropped; Alert: Anti-Spoofing state not known!; The values have the following meaning: -- The first means the feature is disabled -- The second means packets were dropped due to a detected spoofed address -- The third should never happen, but means the status has been set to a bogus value.
1.3.6.1.4.1.2505.1.3.6DisplayStringread-onlymandatory
sslVpnStatus
OBJECT-TYPE
Status of SSL-VPN Accelerator. Possible Values: Disabled: Disabled -- The unit is administrativley disabled. Disabled: HW not installed -- There is no SSL-VPN Accelerator installed. Warning: Initialization in progress. -- The unit is being Initialized. Warning: Configuration Errors - see eventlog for details. Healthy: Operational -- The unit is Operational. Alert: Unreachable: Error Comminicating with SSL-VPN
1.3.6.1.4.1.2505.1.3.7DisplayStringread-onlymandatory
usrIpAddrStatus
OBJECT-TYPE
Status of User Ip Address Pool server. Possible Values: Alert : -- Server is down. Alert : -- Object not found. Alert : -- Server Not Configured. Alert : -- No IP address available. Warning : -- Reserved address count is low. Healthy : -- User Ip Address Pool operational. Alert : -- Associated system task failed. Warning : -- No DHCP Pool selected for any group/subgroup. Warning : -- DHCP server(s) unavailable. Healthy : -- Local pool: %s; Healthy : -- DHCP pool: %s; Healthy : -- All User IP Pools are under quota exhausted. Alert : -- At least one User IP Pool exceeds %d percent
1.3.6.1.4.1.2505.1.3.8DisplayStringread-onlymandatory
vrrpStatus
OBJECT-TYPE
Status of VRRP Server. Possible Values: Disabled : -- VRRP is globally disabled Alert : -- Configuration errors -- see syslog for details Warning : -- LDAP has changed -- see syslog for details Healthy : -- VRRP is operational
1.3.6.1.4.1.2505.1.3.9DisplayStringread-onlymandatory
mcastRelayStatus
OBJECT-TYPE
Status of Multicast Relay. Possible Values: Warning : -- Multicast Relay Not Initialized Disabled : -- Multicast Relay is Globally Disabled Alert : -- RPS Reg Blocked Healthy : -- Multicast Relay is operational
1.3.6.1.4.1.2505.1.3.10DisplayStringread-onlymandatory
dlswStatus
OBJECT-TYPE
Status of DLSW Server. Possible Values: Healthy : -- DLSw local peer enabled Disabled : -- DLSw local peer disabled Disabled : -- DLSw feature disabled Disabled : -- No DLSw local peer defined
1.3.6.1.4.1.2505.1.3.11DisplayStringread-onlymandatory
ipsecFailoverStatus
OBJECT-TYPE
Status of IPsec Failover service. Possible Values: Disabled : -- Failover service disabled Healthy : -- Failover service operational Alert : -- Failover service not initialized
1.3.6.1.4.1.2505.1.3.12DisplayStringread-onlymandatory
tunnelGuardStatus
OBJECT-TYPE
Status of TunnelGuard. Possible Values: Disabled : -- Tunnelguard Disabled Healthy : -- Tunnelguard Operational Alert : -- Fatal error encountered during tunnelguard processing Warning : -- Tunnelguard state unknown!
1.3.6.1.4.1.2505.1.3.13DisplayStringread-onlymandatory
ripStatus
OBJECT-TYPE
Status of RIP Server. Possible Values: Warning : -- Rip Not Initalized Disabled : -- Rip is Globally Disabled Alert : -- RTM Open Blocked Alert : -- RPS Reg Blocked Healthy : -- RIP is operational
1.3.6.1.4.1.2505.1.3.14DisplayStringread-onlymandatory
routePolicyStatus
OBJECT-TYPE
Status of Route Policy. Possible Values: Disable : -- Routing Policy Server disabled. Alert : -- Routing Policy Server requires reboot to start. Alert : -- Routing Policy Server task does not exist. Alert : -- Routing Policy Server task is suspended. Healthy : -- Routing Policy Server is up.
1.3.6.1.4.1.2505.1.3.15DisplayStringread-onlymandatory
cRoutesMStatus
OBJECT-TYPE
Status of Client Routes Marshaler. Possible Values: Alert : -- ClientRoutesMarshaler does not exist!!! Warning : -- ClientRoutesMarshaler's task cannot be verified! Disabled: -- ClientRoutesMarshaler is disabled. Healthy : -- ClientRoutesMarshaler is UP.
1.3.6.1.4.1.2505.1.3.16DisplayStringread-onlymandatory
igmpStatus
OBJECT-TYPE
Status of IGMP Server. Possible Values: Disabled : -- IGMP is not initialized Warning : -- IGMP(CMS) is not initialized Warning : -- No Upstream interface is up Alert : -- No downstream interface is up Healthy : -- IGMP is operational
1.3.6.1.4.1.2505.1.3.17DisplayStringread-onlymandatory
loginCESTrapInfo
OBJECT-IDENTITY
1.3.6.1.4.1.2505.1.4
failedLogin
OBJECT-TYPE
Failed Login Attempt. Possible Values: Failed Login Attempt: Username=IPSEC Encrypted: Date/Time=(xx) ; Failed Login Attempt: Username=(userid): Date/Time=(xx) ; Failed Login Attempt. Invalid Account: Username=(userid): Date/Time=(xx) ; Failed Remote Network Login: Username=(userid): Date/Time=(xx) ; Failed Remote Application Login: Username=(userid): Date/Time=(xx) ; The values have the following meaning: --(userid) is a place holder for the actual userid of the person or branch office --trying to login. --(xx) is a place holder for the date and time string.
1.3.6.1.4.1.2505.1.4.1DisplayStringread-onlymandatory
intrusionCESTrapInfo
OBJECT-IDENTITY
1.3.6.1.4.1.2505.1.5
securityIntrusion
OBJECT-TYPE
Security Intrusion. Possible Values: Intruder: : Source: %s, Destination: %s;
1.3.6.1.4.1.2505.1.5.1DisplayStringread-onlymandatory
powerUpTrap
OBJECT-TYPE
Power Up. Possible Values: Cold Start
1.3.6.1.4.1.2505.1.6DisplayStringread-onlydeprecated
severityLevel
OBJECT-TYPE
Severity of specific trap.
1.3.6.1.4.1.2505.1.7INTEGER {alert(1), warning(2), disabled(3), healthy(4), unknown(5)}read-onlymandatory
systemName
OBJECT-TYPE
System Name.
1.3.6.1.4.1.2505.1.8DisplayStringread-onlymandatory
systemDate
OBJECT-TYPE
System Date.
1.3.6.1.4.1.2505.1.9DisplayStringread-onlymandatory
systemTime
OBJECT-TYPE
System Time.
1.3.6.1.4.1.2505.1.10DisplayStringread-onlymandatory
systemUpTime
OBJECT-TYPE
System Up Time.
1.3.6.1.4.1.2505.1.11DisplayStringread-onlymandatory
periodicHeartbeat
OBJECT-TYPE
Periodic Heartbeat. Possible Values: Has been executed n times
1.3.6.1.4.1.2505.1.12DisplayStringread-onlymandatory
snmpAgentTrapInfo_ces
OBJECT-IDENTITY
1.3.6.1.4.1.2505.1.14
snmpAgentAuthTrapInfo_ces
OBJECT-IDENTITY
1.3.6.1.4.1.2505.1.14.1
snmpAuthenOperation_ces
OBJECT-TYPE
SNMP operation attempted.
1.3.6.1.4.1.2505.1.14.1.1INTEGER {getRequest(160), getNextRequest(161), setRequest(163), getBulkRequest(165)}read-onlymandatory
snmpAuthenIpAddress_ces
OBJECT-TYPE
IP address of host trying to access the CES.
1.3.6.1.4.1.2505.1.14.1.2IpAddressread-onlymandatory
snmpAuthenCommString_ces
OBJECT-TYPE
Community string used to access the CES.
1.3.6.1.4.1.2505.1.14.1.3DisplayStringread-onlymandatory
snmpAgentInterfaceInfo_ces
OBJECT-IDENTITY
1.3.6.1.4.1.2505.1.14.2
ifReasonForStatus_ces
OBJECT-TYPE
The reason for the status change. These include: unknown(1) -- the reason could not be determined. timed-out(2) -- connection(tunnel) timed out.
1.3.6.1.4.1.2505.1.14.2.1IfReasonForStatus_cesread-onlymandatory
ifPhysLocation_ces
OBJECT-TYPE
The physical location of the port. This has the values of motherBoardOrSlot0, slot1, slot2, slot3, slot4, slot5.
1.3.6.1.4.1.2505.1.14.2.2PortLocation_cesread-onlymandatory
ifPhysRelPos_ces
OBJECT-TYPE
The relative position of the physical port at the location defined by interfacePhysLocation.
1.3.6.1.4.1.2505.1.14.2.3INTEGERread-onlymandatory
ifIpAddr_ces
OBJECT-TYPE
For physical ports this is the associated IP address. For a tunnel connection it is the local IP address.
1.3.6.1.4.1.2505.1.14.2.4IpAddressread-onlymandatory
ifName_ces
OBJECT-TYPE
The name of the interface, same as ifName.
1.3.6.1.4.1.2505.1.14.2.5DisplayStringread-onlymandatory
ifTunnelRemoteIpAddr_ces
OBJECT-TYPE
The remote IP address of a tunnel connection.
1.3.6.1.4.1.2505.1.14.2.6IpAddressread-onlymandatory
snmpAgentFirewallInfo_ces
OBJECT-IDENTITY
1.3.6.1.4.1.2505.1.14.3
firewallPolicyType_ces
OBJECT-TYPE
Policy type.
1.3.6.1.4.1.2505.1.14.3.1FirewallPolicyType_cesread-onlymandatory
firewallRuleType_ces
OBJECT-TYPE
Type of rule that triggered this event.
1.3.6.1.4.1.2505.1.14.3.2FirewallRuleType_cesread-onlymandatory
firewallRuleNumber_ces
OBJECT-TYPE
Number of the rule that triggered this event.
1.3.6.1.4.1.2505.1.14.3.3INTEGERread-onlymandatory
firewallSrcAddr_ces
OBJECT-TYPE
Source IP address of the packet.
1.3.6.1.4.1.2505.1.14.3.6IpAddressread-onlymandatory
firewallSrcPort_ces
OBJECT-TYPE
Source port address of the packet.
1.3.6.1.4.1.2505.1.14.3.7INTEGERread-onlymandatory
firewallDestAddr_ces
OBJECT-TYPE
Destination IP address of the packet.
1.3.6.1.4.1.2505.1.14.3.8IpAddressread-onlymandatory
firewallDestPort_ces
OBJECT-TYPE
Destination port of the packet.
1.3.6.1.4.1.2505.1.14.3.9INTEGERread-onlymandatory
firewallProtocolID_ces
OBJECT-TYPE
The value of the protocol field in the IP header.
1.3.6.1.4.1.2505.1.14.3.10INTEGERread-onlymandatory
firewallRuleAction_ces
OBJECT-TYPE
Action defined for the triggered rule.
1.3.6.1.4.1.2505.1.14.3.11FirewallRuleAction_cesread-onlymandatory

Notifications

NameOIDStatus
powerUpTrapEntry
NOTIFICATION-TYPE
Power Up
1.3.6.1.4.1.2505.1.0.401
periodicHeartbeatTrap
NOTIFICATION-TYPE
Periodic Heartbeat
1.3.6.1.4.1.2505.1.0.601
hardDisk1StatusTrap
NOTIFICATION-TYPE
Hard Disk Number 1 Status
1.3.6.1.4.1.2505.1.1.0.1001
hardDisk0StatusTrap
NOTIFICATION-TYPE
Hard Disk Number 0 Status
1.3.6.1.4.1.2505.1.1.0.1002
memoryUsageTrap
NOTIFICATION-TYPE
Memory Usage Status
1.3.6.1.4.1.2505.1.1.0.1003
lanCardStatusTrap
NOTIFICATION-TYPE
Status of any LAN cards on the system
1.3.6.1.4.1.2505.1.1.0.1004
cpuTwoStatusTrap
NOTIFICATION-TYPE
Status of second CPU.
1.3.6.1.4.1.2505.1.1.0.1005
fanOneStatusTrap
NOTIFICATION-TYPE
Status of the first CPU fan
1.3.6.1.4.1.2505.1.1.0.1006
fanTwoStatusTrap
NOTIFICATION-TYPE
Status of the second CPU fan
1.3.6.1.4.1.2505.1.1.0.1007
chassisFanStatusTrap
NOTIFICATION-TYPE
Status of the chassis fan.
1.3.6.1.4.1.2505.1.1.0.1008
fiveVoltsPosStatusTrap
NOTIFICATION-TYPE
Status of the +5 Volt power
1.3.6.1.4.1.2505.1.1.0.1009
fiveVoltsMinusTrap
NOTIFICATION-TYPE
Status of -5 Volt power
1.3.6.1.4.1.2505.1.1.0.10010
threeVoltsPositiveTrap
NOTIFICATION-TYPE
Status of +3 Volt power
1.3.6.1.4.1.2505.1.1.0.10011
twoDotFiveVATrap
NOTIFICATION-TYPE
Status of 2.5VA power
1.3.6.1.4.1.2505.1.1.0.10012
twoDotFiveVBTrap
NOTIFICATION-TYPE
Status of 2.5VB power
1.3.6.1.4.1.2505.1.1.0.10013
twelveVoltsPositveTrap
NOTIFICATION-TYPE
Status of +12 Volt power
1.3.6.1.4.1.2505.1.1.0.10014
twelveVoltsMinsTrap
NOTIFICATION-TYPE
Status of -12 Volt power
1.3.6.1.4.1.2505.1.1.0.10015
normalTemperatureTrap
NOTIFICATION-TYPE
Status of the normal temperature reading
1.3.6.1.4.1.2505.1.1.0.10016
criticalTemperatureTrap
NOTIFICATION-TYPE
Status of the critical temperature reading
1.3.6.1.4.1.2505.1.1.0.10017
chassisIntrusionTrap
NOTIFICATION-TYPE
The chassis intrusion sensor indicates that the unit has been physically opened
1.3.6.1.4.1.2505.1.1.0.10018
dualPowerSupplyTrap
NOTIFICATION-TYPE
Status of the redundant power supplies
1.3.6.1.4.1.2505.1.1.0.10019
t1WANStatusTrap
NOTIFICATION-TYPE
Status of T1 WAN card(s). Possible Values: For Wanic support: Alert: Invalid Device X Warning: Device WanicX disabled Alert: Device WanicX down Warning: Device WanicX not initialized Warning: Device WanicX PPP negotiating Alert: Device WanicX PPP down Alert: Device WanicX FR no support Alert: Device WanicX Unknown DL For T1: Alert: Invalid Device X Warning: Device LMCDTEX disabled Alert: Device LMCDTEX down Warning: Device LMCDTEX not initialized For CSU/DSU: Alert: Invalid Device X Warning: Device LMCCDX disabled Alert: Device LMCCDX down Warning: Device LMCCDX not initialized
1.3.6.1.4.1.2505.1.1.0.10020
t3WANStatusTrap
NOTIFICATION-TYPE
Status of T3 WAN card Possible Values: Alert: Invalid Index X Warning: Device HSSIX disabled Alert: Device HSSIX down Warning: Device HSSIX not initialized Alert: Device HSSIX PPP down Warning: Device HSSIX PP initializing
1.3.6.1.4.1.2505.1.1.0.10021
hwAccelTrap
NOTIFICATION-TYPE
Status of hardware accelerator card. Possible Values: Invalid hardware accelerator unit %d; Unknown hardware accelerator unit %d; Healthy: Bulk Accelerator in slot %d: Unit %d Status 1 - ATTACHED; Warning: Bulk Accelerator in slot %d: Unit %d Status 2 - DISABLED; Healthy: Bulk Accelerator in slot %d: Unit %d Status 3 - ACTIVE; Warning: Bulk Accelerator in slot %d: Unit %d Status 4 - RECOVERING; Warning: Bulk Accelerator in slot %d: Unit %d Status 5 - SHUTDOWN; Alert: Bulk Accelerator in slot %d: Unit %d Status 6 - FAILED;
1.3.6.1.4.1.2505.1.1.0.10022
v90WANStatusTrap
NOTIFICATION-TYPE
Status of V.90 Interface card Possible Values: Please note that X corresponds to the unit number of the card. Alert: V.90 Invalid index X Disabled: Device IntModem-X disabled Healthy: Device IntModem-X: PPP is UP. Alert: Device IntModem-X down Warning: Device IntModem-X not initialized Alert: Device IntModem-X: Call is UP. Internal Error. Warning: Device IntModem-X is Down. Last dial-out attempt FAILED. Healthy: Device IntModem-X is Down (No Active calls) Warning: Device IntModem-X is in an UNKNOWN state
1.3.6.1.4.1.2505.1.1.0.10024
briWANStatusTrap
NOTIFICATION-TYPE
Status of V.90 Interface card Possible Values: Please note that X corresponds to the unit number of the card. Alert: BRI Invalid index X Alert: Device BRI-X not Responding. Needs Host Reboot. Disabled: Device BRI-X disabled Alert: Device BRI-X down Warning: Device BRI-X not initialized Healthy: Device BRI-X: PPP is UP. Alert: Device BRI-X: Call is UP. Internal Error. Warning: Device BRI-X is Down. Last dial-out attempt FAILED. Healthy: Device BRI-X is Down (No Active calls) Alert: Device BRI-X is in an UNKNOWN state
1.3.6.1.4.1.2505.1.1.0.10025
serUartStatusTrap
NOTIFICATION-TYPE
Status of Serial (COM) port/interface Possible Values: Please note that X corresponds to the unit number of the serial interface Alert: COM port Invalid index X Healthy: Device COMX is set for Serial Menu. Disabled: Device COMX disabled Warning: Device COMX not initialized Healthy: Device COMX: PPP is UP. Alert: Device COMX: Call is UP. Internal Error. Warning: Device COMX is Down. Last dial-out attempt FAILED. Healthy: Device COMX is Down (No Active calls) Alert: Device COMX is in an UNKNOWN state
1.3.6.1.4.1.2505.1.1.0.10026
adslWANStatusTrap
NOTIFICATION-TYPE
Status of ADI ADSL card Possible Values: Please note that X corresponds to the unit number of the serial interface Alert: Invalid index X Alert: Device ADIADSLX off line Disabled: Device ADIADSLX disabled Alert: Device ADIADSLX down Warning: Device ADIADSLX not initialized Healthy: Device ADIADSLX up
1.3.6.1.4.1.2505.1.1.0.10027
radiusAcctServerTrap
NOTIFICATION-TYPE
Status of External Radius Accounting Server
1.3.6.1.4.1.2505.1.2.0.3001
backupServerTrap
NOTIFICATION-TYPE
Status of External Disk Backup Server
1.3.6.1.4.1.2505.1.2.0.3002
diskRedundencyTrap
NOTIFICATION-TYPE
Status of Local Disk Redundency
1.3.6.1.4.1.2505.1.2.0.3003
intLDAPServerTrap
NOTIFICATION-TYPE
Status of Internal LDAP Server
1.3.6.1.4.1.2505.1.2.0.3004
loadBalancingServerTrap
NOTIFICATION-TYPE
Status of Load Balancing Server
1.3.6.1.4.1.2505.1.2.0.3005
dnsServerTrap
NOTIFICATION-TYPE
Status of DNS Server
1.3.6.1.4.1.2505.1.2.0.3006
snmpServerTrap
NOTIFICATION-TYPE
Status of SNMP Server
1.3.6.1.4.1.2505.1.2.0.3007
ipAddressPoolTrap
NOTIFICATION-TYPE
Status of the IP address pool
1.3.6.1.4.1.2505.1.2.0.3008
extLDAPServerTrap
NOTIFICATION-TYPE
Status of External LDAP Server
1.3.6.1.4.1.2505.1.2.0.3009
radiusAuthServerTrap
NOTIFICATION-TYPE
Status of Radius Authentication Server
1.3.6.1.4.1.2505.1.2.0.30010
certificateServerTrap
NOTIFICATION-TYPE
Status of Certificates Validity Possible Values: Healthy: Certificates Validity: Operational; Alert: Certificates Validity: All certificates are going to expire/expired; Warning: Certificates Validity: One/more certificate is invalid; Disabled: Certificates Validity: No certificate defined;
1.3.6.1.4.1.2505.1.2.0.30011
extLDAPAuthServerTrap
NOTIFICATION-TYPE
Status of External LDAP Authentication Server. Possible Values: Warning: External LDAP Authentication Server: Server is down(indicates at least one server is not reachable and at least one server is reachable); Alert: External LDAP Authentication Server: Server is down(indicates all servers are not reachable);
1.3.6.1.4.1.2505.1.2.0.30012
cmpServerTrap
NOTIFICATION-TYPE
Status of CMP Server. Possible Values: One/more Certificate Requests error: there is at least one request error; One/more Certificate Requests processing: there is at least one request in processing; No Certificate Requests submitted: there is no request sent;
1.3.6.1.4.1.2505.1.2.0.30013
dhcpServerTrap
NOTIFICATION-TYPE
Status of DHCP Server Possible Values: Disabled: DHCP Server is Disabled Alert: DHCP Server is NOT configured Alert: DHCP Server is configured and operational, Using backup config Alert: No IP Address available for subnet Alert: DHCP Server is configured and server is DOWN Healthy: DHCP Server is Operational Warning: Subnet low on IP Addresses Warning: DHCP Server Initializing Warning: DHCP Server is Enabled, but status Unknown cannot be determined
1.3.6.1.4.1.2505.1.2.0.30014
sshServerTrap
NOTIFICATION-TYPE
Status of SSH Server.
1.3.6.1.4.1.2505.1.2.0.30015
ntpServerTrap
NOTIFICATION-TYPE
Status of NTP Server.
1.3.6.1.4.1.2505.1.2.0.30016
ospfServerTrap
NOTIFICATION-TYPE
Status of OSPF Server.
1.3.6.1.4.1.2505.1.2.0.30017
clipServerTrap
NOTIFICATION-TYPE
Status of Circuitless IP.
1.3.6.1.4.1.2505.1.2.0.30018
dhcprelayServerTrap
NOTIFICATION-TYPE
Status of DHCP Relay Server.
1.3.6.1.4.1.2505.1.2.0.30019
gdsServerTrap
NOTIFICATION-TYPE
Status of Global Demand Services Services.
1.3.6.1.4.1.2505.1.2.0.30020
demandintfServerTrap
NOTIFICATION-TYPE
Status of Demand Interface.
1.3.6.1.4.1.2505.1.2.0.30021
crlServerTrap
NOTIFICATION-TYPE
Status of CRL Server.
1.3.6.1.4.1.2505.1.2.0.30022
ocspServerTrap
NOTIFICATION-TYPE
Status of OCSP Server.
1.3.6.1.4.1.2505.1.2.0.30023
netBuffersTrap
NOTIFICATION-TYPE
Network buffer usage
1.3.6.1.4.1.2505.1.3.0.5001
fireWallTrap
NOTIFICATION-TYPE
Status of internal firewall
1.3.6.1.4.1.2505.1.3.0.5002
fipsStatusTrap
NOTIFICATION-TYPE
Status of FIPS
1.3.6.1.4.1.2505.1.3.0.5003
licensingStatusTrap
NOTIFICATION-TYPE
Status temporary SW Licenses
1.3.6.1.4.1.2505.1.3.0.5004
natStatusTrap
NOTIFICATION-TYPE
Status of Network Address Translator
1.3.6.1.4.1.2505.1.3.0.5005
antiSpoofingStatusTrap
NOTIFICATION-TYPE
Status of Anti Spoofing Feature
1.3.6.1.4.1.2505.1.3.0.5006
sslVpnStatusTrap
NOTIFICATION-TYPE
Status of SSL-VPN Accelerator
1.3.6.1.4.1.2505.1.3.0.5007
usrIpAddrStatusTrap
NOTIFICATION-TYPE
Status of User Ip Address Pool server
1.3.6.1.4.1.2505.1.3.0.5008
vrrpStatusTrap
NOTIFICATION-TYPE
Status of VRRP Server
1.3.6.1.4.1.2505.1.3.0.5009
mcastRelayStatusTrap
NOTIFICATION-TYPE
Status of Multicast Relay
1.3.6.1.4.1.2505.1.3.0.50010
dlswStatusTrap
NOTIFICATION-TYPE
Status of DLSW Server
1.3.6.1.4.1.2505.1.3.0.50011
ipsecFailoverStatusTrap
NOTIFICATION-TYPE
Status of IPsec Failover service
1.3.6.1.4.1.2505.1.3.0.50012
tunnelGuardStatusTrap
NOTIFICATION-TYPE
Status of TunnelGuard
1.3.6.1.4.1.2505.1.3.0.50013
ripStatusTrap
NOTIFICATION-TYPE
Status of RIP Server
1.3.6.1.4.1.2505.1.3.0.50014
routePolicyStatusTrap
NOTIFICATION-TYPE
Status of Route Policy
1.3.6.1.4.1.2505.1.3.0.50015
cRoutesMStatusTrap
NOTIFICATION-TYPE
Status of Client Routes Marshaler
1.3.6.1.4.1.2505.1.3.0.50016
igmpStatusTrap
NOTIFICATION-TYPE
Status of IGMP Server
1.3.6.1.4.1.2505.1.3.0.50017
failedLoginTrap
NOTIFICATION-TYPE
Failed Login Attempt
1.3.6.1.4.1.2505.1.4.0.101
securityIntrusionTrap
NOTIFICATION-TYPE
Security Intrusion
1.3.6.1.4.1.2505.1.5.0.201
firewallRuleTriggeredTrap
NOTIFICATION-TYPE
An event sent at the user's request to signal that a rule has been matched. firewallPolicyType-ces -- Policy type. firewallRuleType-ces -- Type of rule that triggered this event. firewallRuleNumber-ces -- Number of the rule that triggered this event. ifIndex -- ifIndex is the index into the ifTable for port that received the packet. ifName-ces -- The name of the interface, same as ifName. firewallSrcAddr-ces -- Source IP address of the packet. firewallSrcPort-ces -- Source port address of the packet. firewallDestAddr-ces -- Destination IP address of the packet. firewallDestPort-ces -- Destination port of the packet. firewallProtocolID-ces -- The value of the protocol field in the IP header. firewallRuleAction-ces -- Action defined for the triggered rule.
1.3.6.1.4.1.2505.1.14.3.0.1
coldStart
NOTIFICATION-TYPE
A coldStart trap signifies that the SNMPv2 entity, acting in an agent role, is reinitializing itself and that its configuration may have been altered.
1.3.6.1.6.3.1.1.5.1
linkDown
NOTIFICATION-TYPE
A linkDown trap signifies that the sending protocol entity recognizes a failure in one of the communication links represented in the agent's configuration. Varbind list: ifIndex -- ifIndex of the interface. ifAdminStatus -- ifAdminStatus of the interface. ifOperStatus -- ifOperStatus of the interface. ifDescr -- ifDescr of the interface. ifType -- ifType, this provides descrimination of interfaces that are tunnels. ifReasonForStatus-ces -- reason for the change in status. ifPhysLocation-ces -- this is the slot number. ifPhysRelPos-ces -- the port number on the board defined in interfacePhysLocation. ifIpAddr-ces -- IP address assigned to the phys port or the local IP address of a tunnel. ifName-ces -- Name of the tunnel or physical interface. ifTunnelRemoteIpAddr-ces -- for non-tunnel interfaces it is zero. sysObjectID -- sysObjectID of the unit. sysName -- sysName of the unit.
1.3.6.1.6.3.1.1.5.3
linkUp
NOTIFICATION-TYPE
A linkUp trap signifies that the sending protocol entity recognizes that one of the communication links represented in the agent's configuration has come up. Varbind list: ifIndex -- ifIndex of the interface. ifAdminStatus -- ifAdminStatus of the interface. ifOperStatus -- ifOperStatus of the interface. ifDescr -- ifDescr of the interface. ifType -- ifType, this provides descrimination of interfaces that are tunnels. ifReasonForStatus-ces -- reason for the change in status ifPhysLocation-ces -- this is the slot number. ifPhysRelPos-ces -- the port number on the board defined in interfacePhysLocation. ifIpAddr-ces -- IP address assigned to the phys port or the local IP address of a tunnel. ifName-ces -- Name of the tunnel or physical interface. ifTunnelRemoteIpAddr-ces -- for non-tunnel interfaces it is zero. sysObjectID -- sysObjectID of the unit. sysName -- sysName of the unit.
1.3.6.1.6.3.1.1.5.4
authenticationFailure
NOTIFICATION-TYPE
An authenticationFailure trap signifies that the SNMPv2 entity, acting in an agent role, has received a protocol message that is not properly authenticated. The snmpEnableAuthenTraps object indicates whether this trap will be generated. snmpAuthenOperation-ces identifies the operation( ie. GetRequest, GetNextRequest,... ) was being attempted. snmpAuthenIpAddress-ces identifies the source IP address of the operation. snmpAuthenCommString-ces identifies the community string that was used in the operation.
1.3.6.1.6.3.1.1.5.6