COLUBRIS-BANDWIDTH-CONTROL-MIB
- Registered at
- 1.3.6.1.4.1.8744.5.14
- Last updated
- 2004-08-17 00:00
- Organization
- Colubris Networks, Inc.
- Namespace
- hpmsm
- Source file
COLUBRIS-BANDWIDTH-CONTROL-MIB- Digest
sha256:b319480b614b1f790b6c04e8ffca4559be18a73dec7833c6bfc7e4910256e1e6
Description
Colubris Networks Bandwidth Control MIB.
Contact
Colubris Networks Postal: 200 West Street Ste 300 Waltham, Massachusetts 02451-1121 UNITED STATES Phone: +1 781 684 0001 Fax: +1 781 684 0009 E-mail: cn-snmp@colubris.com
Imports
| From | Symbols |
|---|---|
| COLUBRIS-SMI | colubrisMgmtV2 |
| COLUBRIS-TC | ColubrisPriorityQueue |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
COLUBRIS-BANDWIDTH-CONTROL-MIB COLUBRIS-SMI COLUBRIS-TC SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| colubrisBandwidthControlMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.8744.5.14.1 | |||
| coBandwidthControlConfig OBJECT-IDENTITY | 1.3.6.1.4.1.8744.5.14.1.1 | |||
| coBandwidthControlEnable OBJECT-TYPE Indicates if bandwidth control is enabled or disabled on the Internet port. | 1.3.6.1.4.1.8744.5.14.1.1.1 | TruthValue | read-only | current |
| coBandwidthControlMaxTransmitRate OBJECT-TYPE Indicates the maximum rate at which data can be transmitted on the Internet port. If traffic exceeds this rate for short bursts, it is buffered. Long overages will result in data being dropped. | 1.3.6.1.4.1.8744.5.14.1.1.2 | Integer32 | read-only | current |
| coBandwidthControlMaxReceiveRate OBJECT-TYPE Indicates the maximum rate at which data can be received on the Internet port. If traffic exceeds this rate for short bursts it is buffered. Long overages will result in data being dropped. | 1.3.6.1.4.1.8744.5.14.1.1.3 | Integer32 | read-only | current |
| coBandwidthControlLevelTable OBJECT-TYPE A table defining the current bandwidth level settings that are active on the device. | 1.3.6.1.4.1.8744.5.14.1.1.4 | not-accessible | current | |
| coBandwidthControlLevelEntry OBJECT-TYPE An entry in the coBandwidthControlLevelTable. coBandwidthControlLevelIndex - Uniquely access a definition for this particular bandwidth control level. | 1.3.6.1.4.1.8744.5.14.1.1.4.1 | not-accessible | current | |
| coBandwidthControlLevelIndex OBJECT-TYPE Specifies the level index. Each index defines a bandwidth level that traffic can be assigned to. Four indexes are defined (1 to 4) with the following meanings: 1-Low, 2-Normal, 3- High, 4-Very High. | 1.3.6.1.4.1.8744.5.14.1.1.4.1.1 | ColubrisPriorityQueue | not-accessible | current |
| coBandwidthControlLevelMinTransmitRate OBJECT-TYPE Specify the minimum transmit rate for the level as a percentage of coBandwidthControlMaxTransmitRate. This is the minimum amount of bandwidth that will be assigned to a level as soon as outgoing traffic is present on the level. | 1.3.6.1.4.1.8744.5.14.1.1.4.1.2 | Integer32 (0..100) | read-only | current |
| coBandwidthControlLevelMaxTransmitRate OBJECT-TYPE Specify the maximum transmit rate for the specified level as a percentage of coBandwidthControlMaxTransmitRate. This is the maximum amount of outgoing bandwidth that can be consumed by the level. Traffic in excess will be buffered for short bursts, and dropped for sustained overages | 1.3.6.1.4.1.8744.5.14.1.1.4.1.3 | Integer32 (0..100) | read-only | current |
| coBandwidthControlLevelMinReceiveRate OBJECT-TYPE Specify the minimum receive rate for the specified level as a percentage of coBandwidthControlMaxReceiveRateRate. This is the minimum amount of bandwidth that will be assigned to a level as soon as incoming traffic is present on the level. | 1.3.6.1.4.1.8744.5.14.1.1.4.1.4 | Integer32 (0..100) | read-only | current |
| coBandwidthControlLevelMaxReceiveRate OBJECT-TYPE Specify the maximum receive rate for the specified level as a percentage of coBandwidthControlMaxReceiveRateRate. This is the maximum amount of incoming bandwidth that can be consumed by the level. Traffic in excess will be buffered for short bursts, and dropped for sustained overages. | 1.3.6.1.4.1.8744.5.14.1.1.4.1.5 | Integer32 (0..100) | read-only | current |
| colubrisBandwidthControlMIBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.8744.5.14.2 | |||
| colubrisBandwidthControlMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.8744.5.14.2.1 | |||
| colubrisBandwidthControlMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.8744.5.14.2.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| colubrisBandwidthControlMIBCompliance MODULE-COMPLIANCE The compliance statement for the Bandwidth Control MIB. | 1.3.6.1.4.1.8744.5.14.2.1.1 | current |
| colubrisBandwidthControlMIBGroup OBJECT-GROUP A collection of objects for use with Bandwidth Controls. | 1.3.6.1.4.1.8744.5.14.2.2.1 | current |
| colubrisBandwidthControlLevelMIBGroup OBJECT-GROUP A collection of objects for use with Bandwidth Controls. | 1.3.6.1.4.1.8744.5.14.2.2.2 | current |