CISCOSBLAN1-MIB
- Registered at
- 1.3.6.1.4.1.9.6.1.101.224
- Last updated
- 2015-06-30 00:00
- Organization
- Cisco Systems, Inc.
- Revisions
- 2015-06-30 00:00
- Namespace
- cisco
- Source file
CISCOSBLAN1-MIB- Digest
sha256:6815196e90df6f2652fcb86404977e47f84f0fed851912e6d1ff19abf12ac589
Description
The Lan1 MIB module for supporting Lan1 fetaure.
Contact
Postal: 170 West Tasman Drive San Jose , CA 95134-1706 USA Website: Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>
Imports
| From | Symbols |
|---|---|
| CISCOSB-MIB | switch001 |
| Q-BRIDGE-MIB | VlanId |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
BRIDGE-MIB CISCOSB-MIB CISCOSBLAN1-MIB IANAifType-MIB IF-MIB P-BRIDGE-MIB Q-BRIDGE-MIB RFC1158-MIB RFC1271-MIB RMON-MIB RMON2-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC TOKEN-RING-RMON-MIB
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| GroupId TEXTUAL-CONVENTION group id. | current | |||
| GroupIdList TEXTUAL-CONVENTION Each octet within this value specifies a set of eight groups, with the first octet specifying groups 1 through 8, the second octet specifying groups 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered group, and the least significant bit represents the highest numbered group. Thus, each group is represented by a single bit within the value of this object. If that bit has a value of '1' then that group is included in the set of groups; the group is not included if its bit has a value of '0'. | current | |||
| VlanIdOrNone TEXTUAL-CONVENTION group id. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| rlLan1STagEtherType OBJECT-TYPE Specifies the Ethernet type identifying the S-VLAN tag. | 1.3.6.1.4.1.9.6.1.101.224.1 | OCTET STRING (SIZE(2)) | read-write | current |
| rlLan1CPVlanId OBJECT-TYPE Specifies the CP VLAN ID. 0 indicateds no CP vlan. | 1.3.6.1.4.1.9.6.1.101.224.2 | VlanIdOrNone | read-write | current |
| rlLan1CPVlanCos OBJECT-TYPE Specifies the cos assigned to ingress traffic on module ports into the CP VLAN. | 1.3.6.1.4.1.9.6.1.101.224.3 | INTEGER (0..7) | read-write | current |
| rlLan1x86Port OBJECT-TYPE Specifies the interface-id of the Ethernet port connecting LAN1 to the x86 environment implementing Virtual Functions (VFs). 0 indicateds no x86 port defined. | 1.3.6.1.4.1.9.6.1.101.224.4 | INTEGER (0..1000) | read-write | current |
| rlLan1x86VlanMappingTable OBJECT-TYPE A table that contains information mapping s-tag to group id. | 1.3.6.1.4.1.9.6.1.101.224.5 | not-accessible | current | |
| rlLan1x86VlanMappingEntry OBJECT-TYPE A mapping of incoming s-tag to a group. | 1.3.6.1.4.1.9.6.1.101.224.5.1 | not-accessible | current | |
| rlLan1x86VlanMappingVlanId OBJECT-TYPE The s-tag to mapped to group | 1.3.6.1.4.1.9.6.1.101.224.5.1.1 | VlanId | not-accessible | current |
| rlLan1x86VlanMappingGroupId OBJECT-TYPE group for filtering traffic | 1.3.6.1.4.1.9.6.1.101.224.5.1.2 | GroupId | read-write | current |
| rlLan1x86VlanMappingRowStatus OBJECT-TYPE This object indicates the status of this entry. | 1.3.6.1.4.1.9.6.1.101.224.5.1.3 | RowStatus | read-create | current |
| rlLan1VfMacMappingTable OBJECT-TYPE A table that contains information mapping Mac to s-tag. | 1.3.6.1.4.1.9.6.1.101.224.6 | not-accessible | current | |
| rlLan1VfMacMappingEntry OBJECT-TYPE A mapping of incoming s-tag to a group. | 1.3.6.1.4.1.9.6.1.101.224.6.1 | not-accessible | current | |
| rlLan1VfMacMappingDstMacAddress OBJECT-TYPE destination mac address | 1.3.6.1.4.1.9.6.1.101.224.6.1.1 | MacAddress | not-accessible | current |
| rlLan1VfMacMappingVlanId OBJECT-TYPE The s-tag | 1.3.6.1.4.1.9.6.1.101.224.6.1.2 | VlanId | read-write | current |
| rlLan1VfMacMappingMulticast OBJECT-TYPE cp - Specifies the VF which S-VLAN-ID is assigned to multicast/broadcast traffic bridged into the CP VLAN from modules to x86 noncp - Specifies the VF which S-VLAN-ID is assigned to multicast/broadcast traffic | 1.3.6.1.4.1.9.6.1.101.224.6.1.3 | INTEGER {none(1), cp(2), noncp(3)} | read-write | current |
| rlLan1VfMacMappingRowStatus OBJECT-TYPE This object indicates the status of this entry. | 1.3.6.1.4.1.9.6.1.101.224.6.1.4 | RowStatus | read-create | current |
| rlLan1ModulePortTable OBJECT-TYPE A table that contains information on a LAN1 module port. | 1.3.6.1.4.1.9.6.1.101.224.7 | not-accessible | current | |
| rlLan1ModulePortEntry OBJECT-TYPE A mapping of incoming s-tag to a group. | 1.3.6.1.4.1.9.6.1.101.224.7.1 | not-accessible | current | |
| rlLan1ModulePortIfIndex OBJECT-TYPE Specifies the interface-id. | 1.3.6.1.4.1.9.6.1.101.224.7.1.1 | INTEGER (0..1000) | not-accessible | current |
| rlLan1ModulePortCPAllowed OBJECT-TYPE Specifies that CP traffic is allowed on the port, it is used to allow CP multicast/broadcast traffic. | 1.3.6.1.4.1.9.6.1.101.224.7.1.2 | TruthValue | read-write | current |
| rlLan1ModulePortMulticastBroadcastAllowedVlan OBJECT-TYPE Specifies that multicast/broadcast traffic is allowed on the CP VLAN or on non-CP VLAN. If the parameter is not configured then only unicast traffic is allowed. | 1.3.6.1.4.1.9.6.1.101.224.7.1.3 | INTEGER {none(1), cp(2), noncp(3)} | read-write | current |
| rlLan1ModulePortIngressGroupId OBJECT-TYPE Specifies the group number assigned to the input frame on the interface | 1.3.6.1.4.1.9.6.1.101.224.7.1.4 | GroupId | read-write | current |
| rlLan1ModulePortEgressGroupIdList OBJECT-TYPE Specifies the list of egress group numbers | 1.3.6.1.4.1.9.6.1.101.224.7.1.5 | GroupIdList | read-write | current |
| rlLan1ModulePortRowStatus OBJECT-TYPE This object indicates the status of this entry. | 1.3.6.1.4.1.9.6.1.101.224.7.1.6 | RowStatus | read-create | current |
| rlLan1x86PfcTable OBJECT-TYPE A table that contains information on a LAN1 x86 port PFC configuration per priority. | 1.3.6.1.4.1.9.6.1.101.224.8 | not-accessible | current | |
| rlLan1x86PfcEntry OBJECT-TYPE PFC information per priority | 1.3.6.1.4.1.9.6.1.101.224.8.1 | not-accessible | current | |
| rlLan1x86PriorityIndex OBJECT-TYPE Specifies the priority index. | 1.3.6.1.4.1.9.6.1.101.224.8.1.1 | INTEGER (0..7) | not-accessible | current |
| rlLan1x86PriorityIsLossy OBJECT-TYPE Specifies if priority is lossy or lossless | 1.3.6.1.4.1.9.6.1.101.224.8.1.2 | TruthValue | read-write | current |
| rlLan1x86PriorityXoffThreshold OBJECT-TYPE Specifies the value of triggering pause frames when crossing over the threshold | 1.3.6.1.4.1.9.6.1.101.224.8.1.3 | INTEGER | read-write | current |
| rlLan1x86PriorityXonThreshold OBJECT-TYPE Specifies the value of triggering continue frames when crossing under the threshold | 1.3.6.1.4.1.9.6.1.101.224.8.1.4 | INTEGER | read-write | current |