CISCOSB-rndApplications
- Registered at
- 1.3.6.1.4.1.9.6.1.101.35
- Last updated
- 2004-06-01 00:00
- Organization
- Cisco Systems, Inc.
- Revisions
- 2004-06-01 00:00
- Namespace
- cisco
- Source file
CISCOSB-rndApplications- Digest
sha256:abcdbe620a3a5ef41b4be00b6fccd735c8e580f844215273c546e3bdf5d1bbb3
Description
The private MIB module definition for switch001 applications MIB.
Contact
Postal: 170 West Tasman Drive San Jose , CA 95134-1706 USA Website: Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>
Imports
| From | Symbols |
|---|---|
| CISCOSB-MIB | switch001 |
| IF-MIB | InterfaceIndex, InterfaceIndexOrZero, ifIndex |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCOSB-MIB CISCOSB-rndApplications IANAifType-MIB IF-MIB INET-ADDRESS-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| PingCompletionStatus TEXTUAL-CONVENTION If all the echo request packets in this sequence have been responded by valid echo responses, this object is set to ok. Otherwise this status indicates the problem. bad-reply-data indicates that the reply data is not equal to the response data. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| rndMidLevelManagement OBJECT-IDENTITY | 1.3.6.1.4.1.9.6.1.101.35.2 | |||
| rndAlarmOptions OBJECT-IDENTITY | 1.3.6.1.4.1.9.6.1.101.35.2.2 | |||
| rndAlarmEnabling OBJECT-TYPE Indicates whether alarms should be issued to the high-level NMS | 1.3.6.1.4.1.9.6.1.101.35.2.2.1 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| rndAlarmInterval OBJECT-TYPE Indicates the minimal period of time which must pass after issuing an alarm before issuing the same alarm again. | 1.3.6.1.4.1.9.6.1.101.35.2.2.2 | INTEGER | read-write | current |
| rndMonitoredElementsTable OBJECT-TYPE The table of monitored elements of the network | 1.3.6.1.4.1.9.6.1.101.35.2.3 | not-accessible | current | |
| rndMonitoredElementEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.9.6.1.101.35.2.3.1 | not-accessible | current | |
| rndMonitoredElementAddress OBJECT-TYPE The IP address of the monitored element | 1.3.6.1.4.1.9.6.1.101.35.2.3.1.1 | IpAddress | read-only | current |
| rndMonitoredElementCommunity OBJECT-TYPE The community of the monitored element | 1.3.6.1.4.1.9.6.1.101.35.2.3.1.2 | DisplayString (SIZE(1..20)) | read-write | current |
| rndMonitoredElementLabel OBJECT-TYPE The label assigned by the network manager to the monitored element | 1.3.6.1.4.1.9.6.1.101.35.2.3.1.3 | DisplayString (SIZE(1..20)) | read-write | current |
| rndDefaultPollingInterval OBJECT-TYPE The default period of time between two consecutive pollings of the monitored element for the value of an object instance. If no other polling interval is specifically assigned to the monitored object instance, this one will be used | 1.3.6.1.4.1.9.6.1.101.35.2.3.1.4 | INTEGER | read-write | current |
| rndDefaultLogFile OBJECT-TYPE The default file path of the log-file which will contain the polling results for the monitored element. If no other file path is specifically assigned to the monitored object instance, this log-file will be used. | 1.3.6.1.4.1.9.6.1.101.35.2.3.1.5 | DisplayString | read-write | current |
| rndMonitoredElementStatus OBJECT-TYPE It is used to manage the monitored elements table and indicates the current monitoring status of an element. | 1.3.6.1.4.1.9.6.1.101.35.2.3.1.6 | RowStatus | read-write | current |
| rndMonitoringTable OBJECT-TYPE The table of monitored object instances. Each monitored object instance belongs to a monitored element previously entered in the rndMonitoredElementsTable. | 1.3.6.1.4.1.9.6.1.101.35.2.4 | not-accessible | current | |
| rndMonitoringEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.9.6.1.101.35.2.4.1 | not-accessible | current | |
| rndMonitoredElement OBJECT-TYPE A label assigned by the network manager to a monitored element to which this monitored object instance belongs. This label must have been previously entered in an instance of rndMonitoredElementLabel | 1.3.6.1.4.1.9.6.1.101.35.2.4.1.1 | DisplayString (SIZE(1..20)) | read-only | current |
| rndMonitoredObjectInstanceLabel OBJECT-TYPE The label assigned by the network manager to the monitored object instance | 1.3.6.1.4.1.9.6.1.101.35.2.4.1.2 | DisplayString (SIZE(1..20)) | read-only | current |
| rndMonitoredObjectName OBJECT-TYPE The symbolic object type name of the object to which the monitored object instance belongs (as it appears the MIB module definition). In case of ambiguity the <MIB module name> : <object type name> format should be used. An instance of rndMonitoredObjectName need not be assigned any value, if the corresponding instance of rndMonitoredObjectIdentifier is assigned a value, since any one of these, together with the object instance identifier, suffices to unambigously identify the monitored object instance. | 1.3.6.1.4.1.9.6.1.101.35.2.4.1.3 | DisplayString (SIZE(0..20)) | read-write | current |
| rndMonitoredObjectIdentifier OBJECT-TYPE The object identifier of the object to which the monitored object instance belongs. An instance of rndMonitoredObjectIdentifier need not be assigned any value, if the corresponding instance of rndMonitoredObjectName is assigned a value, since any one of these, together with the object instance identifier, suffices to unambigously identify the monitored object instance. | 1.3.6.1.4.1.9.6.1.101.35.2.4.1.4 | OBJECT IDENTIFIER | read-write | current |
| rndMonitoredObjectInstance OBJECT-TYPE The instance identifier (key) of the monitored object instance. | 1.3.6.1.4.1.9.6.1.101.35.2.4.1.5 | OBJECT IDENTIFIER | read-write | current |
| rndMonitoredObjectSyntax OBJECT-TYPE The syntax of the monitored object instance (i.e., the syntax of the object type of the object to which the monitored instance belongs). Need not be assigned any value if the corresponding instance of rndMonitoredObjectName has been assigned a value | 1.3.6.1.4.1.9.6.1.101.35.2.4.1.6 | INTEGER {integer(1), octet-string(2), ip-address(3), object-identifier(4)} | read-write | current |
| rndMonitoringInterval OBJECT-TYPE The period of time between two consecutive retrievals of the monitored object instance's value. | 1.3.6.1.4.1.9.6.1.101.35.2.4.1.7 | INTEGER | read-write | current |
| rndAlarmMaxTreshold OBJECT-TYPE The value of the monitored object instance, the exceeding of which will cause the generation of an alarm to the high-level management station. | 1.3.6.1.4.1.9.6.1.101.35.2.4.1.8 | INTEGER | read-write | current |
| rndAlarmMinTreshold OBJECT-TYPE If the value of the monitored object instance falls below the value assigned to rndAlarmMinTreshold, an alarm to the high-level management station will be issued. | 1.3.6.1.4.1.9.6.1.101.35.2.4.1.9 | INTEGER | read-write | current |
| rndMonitoringLogfile OBJECT-TYPE The entire path of the file in which the results of the monitoring of this object instance should be recorded. | 1.3.6.1.4.1.9.6.1.101.35.2.4.1.10 | DisplayString | read-write | current |
| rndMonitoringEntryStatus OBJECT-TYPE It is used to manage the monitored object instances table and indicates the current monitoring status of an object instance. | 1.3.6.1.4.1.9.6.1.101.35.2.4.1.11 | RowStatus | read-write | current |
| rndMonitoredIntegerInstance OBJECT-TYPE | 1.3.6.1.4.1.9.6.1.101.35.2.4.1.12 | INTEGER | read-write | current |
| rndMibFilesTable OBJECT-TYPE The table of monitored object instances. Each monitored object instance belongs to a monitored element previously entered in the rndMonitoredElementsTable. | 1.3.6.1.4.1.9.6.1.101.35.2.5 | not-accessible | current | |
| rndMibFileEntry OBJECT-TYPE The row definition for this table. | 1.3.6.1.4.1.9.6.1.101.35.2.5.1 | not-accessible | current | |
| rndMibFileIndex OBJECT-TYPE The number of the MIB file in the list MIB files supported by the Mid-Level management station. The order of the MIB files in this list must reflect the the IMPORT relation between the MIBS contained in the MIB files, i.e., if MIB A IMPORTS FROM MIB B, the file containing MIB A must have a lesser index in this table than the file containing MIB B. | 1.3.6.1.4.1.9.6.1.101.35.2.5.1.1 | INTEGER | read-only | current |
| rndMibFilePath OBJECT-TYPE The path of the MIB file in the MIB file server. | 1.3.6.1.4.1.9.6.1.101.35.2.5.1.2 | DisplayString | read-write | current |
| rndMibFileRefresh OBJECT-TYPE Indicates if the file should be fetched after setting this entry from the MIB file server. | 1.3.6.1.4.1.9.6.1.101.35.2.5.1.3 | INTEGER {no(1), yes(2)} | read-write | current |
| rndMibFileEntryStatus OBJECT-TYPE It is used to manage the MIB files table. | 1.3.6.1.4.1.9.6.1.101.35.2.5.1.4 | RowStatus | read-write | current |
| rndHardwareConfiguration OBJECT-TYPE Indicates whether the current SET SNMP PDU contains hardware configuration (i.e., normally read-only variables). SET of such variables in the Mid-level management station will be allowed only if this variable is included in the SNMP PDU and its value is true. Its value as returned in a GET SNMP PDU will always be false. | 1.3.6.1.4.1.9.6.1.101.35.2.6 | TruthValue | read-write | current |
| rndEraseSimulatedConfiguration OBJECT-TYPE eraseSimulatedConfiguration instructs the MLNMS to erase all the simulated configuration from its configuration data-base (CDB). This the only accepted value for SNMP SET statements and will never be returned in SNMP GET statements. simulatedConfigurationPresent indicates that the MLNMS currently has a simulated configuration. simulatedConfigurationErased indicates that the MLNMS currently has no simulated configuration. | 1.3.6.1.4.1.9.6.1.101.35.2.7 | INTEGER {eraseSimulatedConfiguration(1), simulatedConfigurationPresent(2), simulatedConfigurationErased(3)} | read-write | current |
| rndDeleteValuesTable OBJECT-TYPE This table indicates which MIB variables are row status fields which control the status of the entry to which they belong. This table also indicates which (integer!) value of these MIB variables will cause, if present in a SNMP SET PDU, the deletion of the conceptual row instance to which the SET MIB variable instance belongs. | 1.3.6.1.4.1.9.6.1.101.35.2.8 | not-accessible | current | |
| rndDeleteValuesEntry OBJECT-TYPE The row definition for the rndDeleteValuesTable table. | 1.3.6.1.4.1.9.6.1.101.35.2.8.1 | not-accessible | current | |
| rndRowStatusVariableName OBJECT-TYPE The name of the row status field. This name may not necessarily be any name which is present in the MIBs loaded into the MLNMS station. | 1.3.6.1.4.1.9.6.1.101.35.2.8.1.1 | DisplayString (SIZE(1..80)) | read-write | current |
| rndRowStatusObjectId OBJECT-TYPE The object id of the row status field. If the rndRowStatusVariableName is a name present in the MIBs loaded into the MLNMS, this MIB variable is not required, but if given, it must match the object id known to the MLNMS. The variable identified by rndRowStatusVariableName and/or rndRowStatusObjectId must be a read-write MIB variable of type INTEGER which belongs to an entry (i.e, is a child of a MIB variable of type SEQUENCE). | 1.3.6.1.4.1.9.6.1.101.35.2.8.1.2 | OBJECT IDENTIFIER | read-write | current |
| rndRowDeleteValue OBJECT-TYPE The value of the variable identified by rndRowStatusVariableName and/or rndRowStatusObjectId, which, if present in a SNMP SET PDU, will cause the deletion of the conceptual row instance which the SET MIB variable instance belongs. | 1.3.6.1.4.1.9.6.1.101.35.2.8.1.3 | INTEGER | read-write | current |
| rndDeleteValueEntryStatus OBJECT-TYPE It is used to delete an entry from this table. | 1.3.6.1.4.1.9.6.1.101.35.2.8.1.4 | RowStatus | read-write | current |
| snmpTesting OBJECT-IDENTITY | 1.3.6.1.4.1.9.6.1.101.35.2.9 | |||
| rndSimulatedVariablesTable OBJECT-TYPE This table indicates which MIB variables are simulated. | 1.3.6.1.4.1.9.6.1.101.35.2.9.1 | not-accessible | current | |
| rndSimulatedVariablesEntry OBJECT-TYPE The row definition for the rndSimulatedVariablesTable table. | 1.3.6.1.4.1.9.6.1.101.35.2.9.1.1 | not-accessible | current | |
| rndSimulatedVariableEntryIndex OBJECT-TYPE The index entry. | 1.3.6.1.4.1.9.6.1.101.35.2.9.1.1.1 | INTEGER | read-only | current |
| rndSimulatedVariableObjectId OBJECT-TYPE The object id of the simulated variable. If the simulated variable belongs to a table entry, the entire entry is henceforth supported. | 1.3.6.1.4.1.9.6.1.101.35.2.9.1.1.2 | OBJECT IDENTIFIER | read-write | current |
| rndNotSupportedField OBJECT-TYPE Variable for not supported simulation. | 1.3.6.1.4.1.9.6.1.101.35.2.9.1.1.3 | INTEGER | read-only | current |
| rndSimulatedVariableEntryStatus OBJECT-TYPE It is used to delete an entry from this table. | 1.3.6.1.4.1.9.6.1.101.35.2.9.1.1.4 | RowStatus | read-write | current |
| rndSnmpTestPassword OBJECT-TYPE This variable enables the user supplying the correct code to use the SNMP test feature. | 1.3.6.1.4.1.9.6.1.101.35.2.9.2 | INTEGER | read-write | current |
| rndSnmpTests OBJECT-TYPE This variable enables the authorized user to test various SNMP features. | 1.3.6.1.4.1.9.6.1.101.35.2.9.3 | INTEGER {noSimulation(1), simulateSetFailure(2), simulateAppGet(3), simulateAppGetNext(4)} | read-write | current |
| rndSimulateUndo OBJECT-TYPE This variable enables the authorized user to test the SNMP UNDO feature. | 1.3.6.1.4.1.9.6.1.101.35.2.9.4 | INTEGER | read-write | current |
| rlSnmpServTestRequest OBJECT-TYPE This variable enables the authorized user to test the SNMP SERV package. | 1.3.6.1.4.1.9.6.1.101.35.2.9.5 | INTEGER | read-write | current |
| rlSnmpServTestResponse OBJECT-TYPE This variable enables the authorized user to retrieve the results of a the SNMP SERV package test. | 1.3.6.1.4.1.9.6.1.101.35.2.9.6 | OCTET STRING | read-only | current |
| rlSnmpServCreateTestPool OBJECT-TYPE This variable enables the authorized user to indicate that after its reset the device should create a buffer pool for SNMPServ process PDU testing. | 1.3.6.1.4.1.9.6.1.101.35.2.9.7 | INTEGER {create(1), no-create(2)} | read-write | current |
| rlSnmpServITCbindClients OBJECT-TYPE This variable enables the authorized user to to indicate that after its reset the device should create ITC clients for SnmpServ data requests clients. The semantics of this variable is as follows: subidentifier 2*n indicates whether the client n is synchronous(1) or asynchronous(2) subidentifier 2*n+1 indicates the number of simulatneous requests expected by client n. | 1.3.6.1.4.1.9.6.1.101.35.2.9.8 | OBJECT IDENTIFIER | read-write | current |
| rlSnmpTestSimulatedVariables OBJECT-IDENTITY | 1.3.6.1.4.1.9.6.1.101.35.2.9.9 | |||
| rlTstBasicRateTable OBJECT-TYPE Table for testing SNMP agent. | 1.3.6.1.4.1.9.6.1.101.35.2.9.10 | not-accessible | current | |
| rlTstBasicRateEntry OBJECT-TYPE An entry in the rlTstBasicRateTable. | 1.3.6.1.4.1.9.6.1.101.35.2.9.10.1 | not-accessible | current | |
| rlTstBasicRateIfType OBJECT-TYPE | 1.3.6.1.4.1.9.6.1.101.35.2.9.10.1.1 | INTEGER {isdns(75), isdnu(76)} | read-write | current |
| rlTstBasicRateLineTopology OBJECT-TYPE | 1.3.6.1.4.1.9.6.1.101.35.2.9.10.1.2 | INTEGER {pointToPoint(1), pointToMultipoint(2)} | read-write | current |
| rlTstBasicRateIfMode OBJECT-TYPE | 1.3.6.1.4.1.9.6.1.101.35.2.9.10.1.3 | INTEGER {te(1), nt(2)} | read-write | current |
| rlTstBasicRateSignalMode OBJECT-TYPE | 1.3.6.1.4.1.9.6.1.101.35.2.9.10.1.4 | INTEGER {active(1), inactive(2)} | read-write | current |
| rlMibTree OBJECT-IDENTITY | 1.3.6.1.4.1.9.6.1.101.35.2.10 | |||
| rlMibTreeTable OBJECT-TYPE This reflects the MIB tree of the device. | 1.3.6.1.4.1.9.6.1.101.35.2.10.1 | not-accessible | current | |
| rlMibTreeEntry OBJECT-TYPE Each row shows a tree relationsship in the MIB. | 1.3.6.1.4.1.9.6.1.101.35.2.10.1.1 | not-accessible | current | |
| rlMibTreeFather OBJECT-TYPE The father in a tree relation ship. | 1.3.6.1.4.1.9.6.1.101.35.2.10.1.1.1 | DisplayString | not-accessible | current |
| rlMibTreeSonIndex OBJECT-TYPE Running index for this table. | 1.3.6.1.4.1.9.6.1.101.35.2.10.1.1.2 | INTEGER | not-accessible | current |
| rlMibTreeSon OBJECT-TYPE The son in a tree relation ship. | 1.3.6.1.4.1.9.6.1.101.35.2.10.1.1.3 | DisplayString | read-only | current |
| rlMibTreeSonObjectId OBJECT-TYPE The object identifier of the son in a tree relation ship. | 1.3.6.1.4.1.9.6.1.101.35.2.10.1.1.4 | OBJECT IDENTIFIER | read-only | current |
| rlMibTreeGrandFather OBJECT-TYPE The grand father (i.e father's father) in a tree relation ship. | 1.3.6.1.4.1.9.6.1.101.35.2.10.1.1.5 | DisplayString | read-only | current |
| rlMibInstances OBJECT-IDENTITY | 1.3.6.1.4.1.9.6.1.101.35.2.11 | |||
| rlMibTableInstancesInfoTable OBJECT-TYPE A table for retreiving information on the current instances in a requested MIB table. | 1.3.6.1.4.1.9.6.1.101.35.2.11.1 | not-accessible | current | |
| rlMibTableInstancesInfoEntry OBJECT-TYPE A row with index rlMibTableInstancesInfoTableName = 'xTable' contains information on current instances in 'xTable'. | 1.3.6.1.4.1.9.6.1.101.35.2.11.1.1 | not-accessible | current | |
| rlMibTableInstancesInfoTableName OBJECT-TYPE The name of the MIB table (for examle: snmpCommunityTable) | 1.3.6.1.4.1.9.6.1.101.35.2.11.1.1.1 | DisplayString (SIZE(1..160)) | not-accessible | current |
| rlMibTableInstancesInfoNumOfInstances OBJECT-TYPE Get operation on this object will retreive the current number of instances in the MIB table specified by the index rlMibTableInstancesInfoTableName. | 1.3.6.1.4.1.9.6.1.101.35.2.11.1.1.2 | INTEGER | read-only | current |
| rsPingMIB OBJECT-IDENTITY | 1.3.6.1.4.1.9.6.1.101.35.4 | |||
| rsPingTable OBJECT-TYPE A table of ping request entries. | 1.3.6.1.4.1.9.6.1.101.35.4.1 | not-accessible | current | |
| rsPingEntry OBJECT-TYPE A ping request entry. A management station wishing to create an entry should first generate a pseudo-random serial number to be used as the index to this sparse table. It must also create in the same PDU the associated instance of the address object. It should also modify in the same PDU the default values for the other configuration objects if the defaults are not appropriate. Once the sequence completes, the management station should retrieve the values of the status objects of interest, and should then delete the entry. In order to prevent old entries from clogging the table, entries will be aged out, but an entry will never be deleted within 5 minutes of completing. | 1.3.6.1.4.1.9.6.1.101.35.4.1.1 | not-accessible | current | |
| rsPingAddress OBJECT-TYPE The address of the device to be pinged. Once an instance of this object is created, its value can not be changed. | 1.3.6.1.4.1.9.6.1.101.35.4.1.1.1 | IpAddress | read-write | current |
| rsPingPacketCount OBJECT-TYPE Specifies the number of ping packets to send to the target in this sequence. | 1.3.6.1.4.1.9.6.1.101.35.4.1.1.2 | INTEGER (1..2147483647) | read-write | current |
| rsPingPacketSize OBJECT-TYPE Specifies the size of ping packets to send to the target in this sequence. The lower and upper boundaries of this object are implementation dependent. | 1.3.6.1.4.1.9.6.1.101.35.4.1.1.3 | INTEGER | read-write | current |
| rsPingPacketTimeout OBJECT-TYPE Specifies the amount of time to wait for a response to a transmitted packet before declaring the packet 'dropped.' | 1.3.6.1.4.1.9.6.1.101.35.4.1.1.4 | INTEGER (0..3600000) | read-write | current |
| rsPingDelay OBJECT-TYPE Specifies the minimum amount of time to wait before sending the next packet in a sequence after receiving a response. The actual delay may be greater due to internal task scheduling. | 1.3.6.1.4.1.9.6.1.101.35.4.1.1.5 | INTEGER (0..3600000) | read-write | current |
| rsPingTrapOnCompletion OBJECT-TYPE Specifies whether or not a rsPingCompletion trap should be issued on completion of the sequence of pings. If such a trap is desired, the NMS should ensure that the community table contains an instance specified by the NMSs IP address with rndCommunityTrapsEnable = trapsEnable. | 1.3.6.1.4.1.9.6.1.101.35.4.1.1.6 | TruthValue | read-write | current |
| rsPingSentPackets OBJECT-TYPE The number of ping packets that have been sent to the target in this sequence. | 1.3.6.1.4.1.9.6.1.101.35.4.1.1.7 | Counter32 | read-only | current |
| rsPingReceivedPackets OBJECT-TYPE The number of ping packets that have been received from the target in this sequence. | 1.3.6.1.4.1.9.6.1.101.35.4.1.1.8 | Counter32 | read-only | current |
| rsPingMinReturnTime OBJECT-TYPE The minimum round trip time of all the packets that have been sent in this sequence. The value returned to a GET request is meaningless if no ping response in a sequence has been received yet. | 1.3.6.1.4.1.9.6.1.101.35.4.1.1.9 | INTEGER | read-only | current |
| rsPingAvgReturnTime OBJECT-TYPE The average round trip time of all the packets that have been sent in this sequence.The value returned to a GET request is meaningless if no ping response in a sequence has been received yet. | 1.3.6.1.4.1.9.6.1.101.35.4.1.1.10 | INTEGER | read-only | current |
| rsPingMaxReturnTime OBJECT-TYPE The maximum round trip time of all the packets that have been sent in this sequence.The value returned to a GET request is meaningless if no ping response in a sequence has been received yet. | 1.3.6.1.4.1.9.6.1.101.35.4.1.1.11 | INTEGER | read-only | current |
| rsPingCompletionStatus OBJECT-TYPE If all the echo request packets in this sequence have been responded by valid echo responses, this object is set to ok. Otherwise this status indicates the problem. bad-reply-data indicates that the reply data is not equal to the response data. | 1.3.6.1.4.1.9.6.1.101.35.4.1.1.12 | PingCompletionStatus | read-only | current |
| rsPingTimeStamp OBJECT-TYPE The time-stamp indicating the time and date of creation or last update of this request. The format of the time-stamp is dd/mm/yyyy hh:mm:ss | 1.3.6.1.4.1.9.6.1.101.35.4.1.1.13 | DisplayString (SIZE(19)) | read-only | current |
| rsPingEntryStatus OBJECT-TYPE The status of this table entry. | 1.3.6.1.4.1.9.6.1.101.35.4.1.1.14 | RowStatus | read-write | current |
| rsPingInetTable OBJECT-TYPE A table of ping request entries. | 1.3.6.1.4.1.9.6.1.101.35.4.2 | not-accessible | current | |
| rsPingInetEntry OBJECT-TYPE A ping request entry. A management station wishing to create an entry should first generate a pseudo-random serial number to be used as the index to this sparse table. It must also create in the same PDU the associated instance of the address object. It should also modify in the same PDU the default values for the other configuration objects if the defaults are not appropriate. Once the sequence completes, the management station should retrieve the values of the status objects of interest, and should then delete the entry. In order to prevent old entries from clogging the table, entries will be aged out, but an entry will never be deleted within 5 minutes of completing. | 1.3.6.1.4.1.9.6.1.101.35.4.2.1 | not-accessible | current | |
| rsPingInetAddressType OBJECT-TYPE The address type of the device to be pinged. Once an instance of this object is created, its value can not be changed. | 1.3.6.1.4.1.9.6.1.101.35.4.2.1.1 | InetAddressType | read-write | current |
| rsPingInetAddress OBJECT-TYPE The address of the device to be pinged. Once an instance of this object is created, its value can not be changed. | 1.3.6.1.4.1.9.6.1.101.35.4.2.1.2 | InetAddress | read-write | current |
| rsPingInetPacketCount OBJECT-TYPE Specifies the number of ping packets to send to the target in this sequence. | 1.3.6.1.4.1.9.6.1.101.35.4.2.1.3 | INTEGER (1..2147483647) | read-write | current |
| rsPingInetPacketSize OBJECT-TYPE Specifies the size of ping packets to send to the target in this sequence. The lower and upper boundaries of this object are implementation dependent. | 1.3.6.1.4.1.9.6.1.101.35.4.2.1.4 | INTEGER | read-write | current |
| rsPingInetPacketTimeout OBJECT-TYPE Specifies the amount of time (in milliseconds) to wait for a response to a transmitted packet before declaring the packet 'dropped.' | 1.3.6.1.4.1.9.6.1.101.35.4.2.1.5 | INTEGER (0..3600000) | read-write | current |
| rsPingInetDelay OBJECT-TYPE Specifies the minimum amount of time (in milliseconds) to wait before sending the next packet in a sequence after receiving a response. The actual delay may be greater due to internal task scheduling. | 1.3.6.1.4.1.9.6.1.101.35.4.2.1.6 | INTEGER (0..3600000) | read-write | current |
| rsPingInetTrapOnCompletion OBJECT-TYPE Specifies whether or not a rsPingCompletion trap should be issued on completion of the sequence of pings. If such a trap is desired, the NMS should ensure that the community table contains an instance specified by the NMSs IP address with rndCommunityTrapsEnable = trapsEnable. | 1.3.6.1.4.1.9.6.1.101.35.4.2.1.7 | TruthValue | read-write | current |
| rsPingInetSentPackets OBJECT-TYPE The number of ping packets that have been sent to the target in this sequence. | 1.3.6.1.4.1.9.6.1.101.35.4.2.1.8 | Counter32 | read-only | current |
| rsPingInetReceivedPackets OBJECT-TYPE The number of ping packets that have been received from the target in this sequence. | 1.3.6.1.4.1.9.6.1.101.35.4.2.1.9 | Counter32 | read-only | current |
| rsPingInetMinReturnTime OBJECT-TYPE The minimum round trip time (in milliseconds) of all the packets that have been sent in this sequence. The value returned to a GET request is meaningless if no ping response in a sequence has been received yet. | 1.3.6.1.4.1.9.6.1.101.35.4.2.1.10 | INTEGER | read-only | current |
| rsPingInetAvgReturnTime OBJECT-TYPE The average round trip time (in milliseconds) of all the packets that have been sent in this sequence.The value returned to a GET request is meaningless if no ping response in a sequence has been received yet. | 1.3.6.1.4.1.9.6.1.101.35.4.2.1.11 | INTEGER | read-only | current |
| rsPingInetMaxReturnTime OBJECT-TYPE The maximum round trip time (in milliseconds) of all the packets that have been sent in this sequence.The value returned to a GET request is meaningless if no ping response in a sequence has been received yet. | 1.3.6.1.4.1.9.6.1.101.35.4.2.1.12 | INTEGER | read-only | current |
| rsPingInetCompletionStatus OBJECT-TYPE If all the echo request packets in this sequence have been responded by valid echo responses, this object is set to ok. Otherwise this status indicates the problem. bad-reply-data indicates that the reply data is not equal to the response data. | 1.3.6.1.4.1.9.6.1.101.35.4.2.1.13 | PingCompletionStatus | read-only | current |
| rsPingInetTimeStamp OBJECT-TYPE The time-stamp indicating the time and date of creation or last update of this request. The format of the time-stamp is dd/mm/yyyy hh:mm:ss | 1.3.6.1.4.1.9.6.1.101.35.4.2.1.14 | DisplayString (SIZE(19)) | read-only | current |
| rsPingInetEntryStatus OBJECT-TYPE The status of this table entry. | 1.3.6.1.4.1.9.6.1.101.35.4.2.1.15 | RowStatus | read-write | current |
| rsPingInetSourceAddr OBJECT-TYPE The status of this table entry. | 1.3.6.1.4.1.9.6.1.101.35.4.2.1.16 | InetAddress | read-write | current |
| rsPowerSupplyRedundacy OBJECT-IDENTITY | 1.3.6.1.4.1.9.6.1.101.35.5 | |||
| rsPowerSupplyRedundacyTable OBJECT-TYPE The power supply redundancy table. | 1.3.6.1.4.1.9.6.1.101.35.5.1 | not-accessible | current | |
| rsPowerSupplyRedundacyEntry OBJECT-TYPE The status of power supply redundancy for this table. | 1.3.6.1.4.1.9.6.1.101.35.5.1.1 | not-accessible | current | |
| rsPowerSupplyRedundacyReNumber OBJECT-TYPE This number identifies the module backed up by power supply redundancy in the stack. | 1.3.6.1.4.1.9.6.1.101.35.5.1.1.1 | INTEGER (1..31) | read-only | current |
| rsPowerSupplyRedundacyStatus OBJECT-TYPE The status of a power supply redundancy of the entry. | 1.3.6.1.4.1.9.6.1.101.35.5.1.1.2 | INTEGER {notExist(1), existButNotWorking(2), bothWorking(3), internalOnlyWorking(4), externalOnlyWorking(5)} | read-only | current |
| rsNvram OBJECT-IDENTITY | 1.3.6.1.4.1.9.6.1.101.35.6 | |||
| rsEraseNvramAfterReset OBJECT-TYPE The name of NVRAM application that will be erased after reset or ALL if all NVRAM should be erased. | 1.3.6.1.4.1.9.6.1.101.35.6.1 | DisplayString (SIZE(0..20)) | read-write | current |
| rsNvramApplTable OBJECT-TYPE The NVRAM application table. | 1.3.6.1.4.1.9.6.1.101.35.6.2 | not-accessible | current | |
| rsNvramApplEntry OBJECT-TYPE The status of NVRAM application table. | 1.3.6.1.4.1.9.6.1.101.35.6.2.1 | not-accessible | current | |
| rsNvramApplIndex OBJECT-TYPE The index of NVRAM application table. | 1.3.6.1.4.1.9.6.1.101.35.6.2.1.1 | INTEGER | read-only | current |
| rsNvramApplName OBJECT-TYPE The name of application used NVRAM. | 1.3.6.1.4.1.9.6.1.101.35.6.2.1.2 | DisplayString (SIZE(0..20)) | read-only | current |