CISCOSB-rlFft
- Registered at
- 1.3.6.1.4.1.9.6.1.101.47
- Last updated
- 2004-06-01 00:00
- Organization
- Cisco Systems, Inc.
- Revisions
- 2004-06-01 00:00
- Namespace
- cisco
- Source file
CISCOSB-rlFft- Digest
sha256:236660587e1dea19e9419cbfca61c0401811eea70f5d713507887d15048449fa
Description
The private MIB module definition for switch001 Fast Forwarding Tables.
Contact
Postal: 170 West Tasman Drive San Jose , CA 95134-1706 USA Website: Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>
Imports
| From | Symbols |
|---|---|
| CISCOSB-MIB | switch001 |
| INET-ADDRESS-MIB | InetAddress, InetAddressPrefixLength, InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCOSB-MIB CISCOSB-rlFft INET-ADDRESS-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| NetNumber TEXTUAL-CONVENTION Specifies the network identification. | current | |||
| Percents TEXTUAL-CONVENTION Specifies percents. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| rlIpFFT OBJECT-IDENTITY | 1.3.6.1.4.1.9.6.1.101.47.1 | |||
| rlIpFftMibVersion OBJECT-TYPE MIB's version, the current version is 1. | 1.3.6.1.4.1.9.6.1.101.47.1.1 | INTEGER | read-only | current |
| rlInetMaxFftNumber OBJECT-TYPE The maximum number of IP FFTs. | 1.3.6.1.4.1.9.6.1.101.47.1.2 | INTEGER | read-only | current |
| rlInetFftDynamicSupported OBJECT-TYPE Specifies whether dynamic IP FFTs are supported. | 1.3.6.1.4.1.9.6.1.101.47.1.3 | INTEGER {supported(1), unsupported(2)} | read-only | current |
| rlInetFftSubnetSupported OBJECT-TYPE Specifies whether subtable per IP subnet is supported. | 1.3.6.1.4.1.9.6.1.101.47.1.4 | INTEGER {supported(1), unsupported(2)} | read-only | current |
| rlIpFftUnknownAddrMsgUsed OBJECT-TYPE Specifies whether the 3SW uses the unknown address message. | 1.3.6.1.4.1.9.6.1.101.47.1.5 | INTEGER {used(1), unused(2)} | read-only | current |
| rlInetFftAgingTimeSupported OBJECT-TYPE Specifies whether aging time is supported. | 1.3.6.1.4.1.9.6.1.101.47.1.6 | INTEGER {supported(1), unsupported(2)} | read-only | current |
| rlIpFftSrcAddrSupported OBJECT-TYPE Specifies whether an IP subtable per station contains source IP address. | 1.3.6.1.4.1.9.6.1.101.47.1.7 | INTEGER {supported(1), unsupported(2)} | read-only | current |
| rlInetFftAgingTimeout OBJECT-TYPE The aging timeout in seconds. | 1.3.6.1.4.1.9.6.1.101.47.1.8 | INTEGER | read-write | current |
| rlIpFftRedBoundary OBJECT-TYPE The red boundary in percents. | 1.3.6.1.4.1.9.6.1.101.47.1.9 | Percents | read-write | current |
| rlIpFftYellowBoundary OBJECT-TYPE The yellow boundary in percents. | 1.3.6.1.4.1.9.6.1.101.47.1.10 | Percents | read-write | current |
| rlInetFftNumTable OBJECT-TYPE The (conceptual) table containing routes' numbers of the IP SFFTs and IP NFFTs. | 1.3.6.1.4.1.9.6.1.101.47.1.12 | not-accessible | current | |
| rlInetFftNumEntry OBJECT-TYPE An entry (conceptual row) containing the containing routes' numbers of IP SFFT and IP NFFT | 1.3.6.1.4.1.9.6.1.101.47.1.12.1 | not-accessible | current | |
| rlInetFftNumIndex OBJECT-TYPE The value of the index of the IP FFT. | 1.3.6.1.4.1.9.6.1.101.47.1.12.1.1 | INTEGER | read-only | current |
| rlInetFftNumAddressType OBJECT-TYPE The inet address type that are contained in the IP SFFT. | 1.3.6.1.4.1.9.6.1.101.47.1.12.1.2 | InetAddressType | read-only | current |
| rlInetFftNumStnRoutesNumber OBJECT-TYPE The number of routes that are contained in the IP SFFT. | 1.3.6.1.4.1.9.6.1.101.47.1.12.1.3 | INTEGER | read-only | current |
| rlInetFftNumSubRoutesNumber OBJECT-TYPE The number of routes that are contained in the IP NFFT. | 1.3.6.1.4.1.9.6.1.101.47.1.12.1.4 | INTEGER | read-only | current |
| rlInetFftNumInetTomeRoutesNumber OBJECT-TYPE The number of routes that are Inet To Me. | 1.3.6.1.4.1.9.6.1.101.47.1.12.1.5 | INTEGER | read-only | current |
| rlInetFftStnTable OBJECT-TYPE The (conceptual) table contains IP Fast Forwarding information per station for IP datagrams. | 1.3.6.1.4.1.9.6.1.101.47.1.13 | not-accessible | current | |
| rlInetFftStnEntry OBJECT-TYPE An entry (conceptual row) contains the IP fast forwarding information for IP datagrams from a particular source and destination addresses. | 1.3.6.1.4.1.9.6.1.101.47.1.13.1 | not-accessible | current | |
| rlInetFftStnIndex OBJECT-TYPE The value of the index of the IP FFT. | 1.3.6.1.4.1.9.6.1.101.47.1.13.1.1 | INTEGER | read-only | current |
| rlInetFftStnMrid OBJECT-TYPE The router's Instance Identifier in the SFFT. | 1.3.6.1.4.1.9.6.1.101.47.1.13.1.2 | INTEGER | read-only | current |
| rlInetFftStnDstInetAddressType OBJECT-TYPE The Ip destination type for which this entry contains IP forwarding information. | 1.3.6.1.4.1.9.6.1.101.47.1.13.1.3 | InetAddressType | read-only | current |
| rlInetFftStnDstInetAddress OBJECT-TYPE The IP destination address for which this entry contains IP forwarding information. | 1.3.6.1.4.1.9.6.1.101.47.1.13.1.4 | InetAddress | read-only | current |
| rlInetFftStnDstRouteInetPrefix OBJECT-TYPE The IP destination prefix for which this entry contains IP forwarding information. | 1.3.6.1.4.1.9.6.1.101.47.1.13.1.5 | InetAddressPrefixLength | read-only | current |
| rlInetFftStnDstInetAddrType OBJECT-TYPE The IP destination address type. | 1.3.6.1.4.1.9.6.1.101.47.1.13.1.6 | INTEGER {local(1), remote(2)} | read-only | current |
| rlInetFftStnDstMacAddress OBJECT-TYPE The MAC destination address. | 1.3.6.1.4.1.9.6.1.101.47.1.13.1.7 | PhysAddress | read-only | current |
| rlInetFftStnSrcMacAddress OBJECT-TYPE The MAC source address. | 1.3.6.1.4.1.9.6.1.101.47.1.13.1.8 | PhysAddress | read-only | current |
| rlInetFftStnOutIfIndex OBJECT-TYPE The value of ifIndex of output physical port. | 1.3.6.1.4.1.9.6.1.101.47.1.13.1.9 | INTEGER | read-only | current |
| rlInetFftStnVid OBJECT-TYPE The vid of the output port. | 1.3.6.1.4.1.9.6.1.101.47.1.13.1.10 | INTEGER | read-only | current |
| rlInetFftStnTaggedMode OBJECT-TYPE The tagged value of the port. When the Tagged field is not a part of the FFT table in the ASIC, the Tagged field gets the BasedPortConfig value | 1.3.6.1.4.1.9.6.1.101.47.1.13.1.11 | INTEGER {untagged(1), tagged(2), basedPortConfig(3)} | read-only | current |
| rlInetFftStnAge OBJECT-TYPE The age of the entry in seconds from the inserting. | 1.3.6.1.4.1.9.6.1.101.47.1.13.1.12 | INTEGER | read-only | current |
| rlInetFftSubTable OBJECT-TYPE The (conceptual) table containing IP Fast Forwarding information per subnet for IP datagrams. | 1.3.6.1.4.1.9.6.1.101.47.1.14 | not-accessible | current | |
| rlInetFftSubEntry OBJECT-TYPE An entry (conceptual row) containing the IP fast forwarding information for IP datagrams from a particular source and destination addresses. | 1.3.6.1.4.1.9.6.1.101.47.1.14.1 | not-accessible | current | |
| rlInetFftSubMrid OBJECT-TYPE The router's Instance Identifier in the NFFT. | 1.3.6.1.4.1.9.6.1.101.47.1.14.1.1 | INTEGER | read-only | current |
| rlInetFftSubDstInetSubnetType OBJECT-TYPE The IP destination subnet type for which this entry contains IP forwarding information. | 1.3.6.1.4.1.9.6.1.101.47.1.14.1.2 | InetAddressType | read-only | current |
| rlInetFftSubDstInetSubnet OBJECT-TYPE The IP destination subnet for which this entry contains IP forwarding information. | 1.3.6.1.4.1.9.6.1.101.47.1.14.1.3 | InetAddress | read-only | current |
| rlInetFftSubDstInetPrefix OBJECT-TYPE The IP destination prefix for which this entry contains IP forwarding information. | 1.3.6.1.4.1.9.6.1.101.47.1.14.1.4 | InetAddressPrefixLength | read-only | current |
| rlInetFftSubNextHopSetRefCount OBJECT-TYPE The number of NFFT entries that used the given NextHop set (ECMP path). | 1.3.6.1.4.1.9.6.1.101.47.1.14.1.5 | INTEGER | read-only | current |
| rlInetFftSubNextHopCount OBJECT-TYPE The number of used NextHops in the given NextHop set (ECMP path) for the NFFT entry. | 1.3.6.1.4.1.9.6.1.101.47.1.14.1.6 | INTEGER | read-only | current |
| rlInetFftSubNextHopIfindex1 OBJECT-TYPE The first NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. | 1.3.6.1.4.1.9.6.1.101.47.1.14.1.7 | INTEGER | read-only | current |
| rlInetFftSubNextHopInetAddr1Type OBJECT-TYPE The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry. | 1.3.6.1.4.1.9.6.1.101.47.1.14.1.8 | InetAddressType | read-only | current |
| rlInetFftSubNextHopInetAddr1 OBJECT-TYPE The first NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. | 1.3.6.1.4.1.9.6.1.101.47.1.14.1.9 | InetAddress | read-only | current |
| rlInetFftSubNextHopIfindex2 OBJECT-TYPE The second NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. | 1.3.6.1.4.1.9.6.1.101.47.1.14.1.10 | INTEGER | read-only | current |
| rlInetFftSubNextHopInetAddr2Type OBJECT-TYPE The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry. | 1.3.6.1.4.1.9.6.1.101.47.1.14.1.11 | InetAddressType | read-only | current |
| rlInetFftSubNextHopInetAddr2 OBJECT-TYPE The second NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. | 1.3.6.1.4.1.9.6.1.101.47.1.14.1.12 | InetAddress | read-only | current |
| rlInetFftSubNextHopIfindex3 OBJECT-TYPE The third NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. | 1.3.6.1.4.1.9.6.1.101.47.1.14.1.13 | INTEGER | read-only | current |
| rlInetFftSubNextHopInetAddr3Type OBJECT-TYPE The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry. | 1.3.6.1.4.1.9.6.1.101.47.1.14.1.14 | InetAddressType | read-only | current |
| rlInetFftSubNextHopInetAddr3 OBJECT-TYPE The third NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. | 1.3.6.1.4.1.9.6.1.101.47.1.14.1.15 | InetAddress | read-only | current |
| rlInetFftSubNextHopIfindex4 OBJECT-TYPE The fourth NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. | 1.3.6.1.4.1.9.6.1.101.47.1.14.1.16 | INTEGER | read-only | current |
| rlInetFftSubNextHopInetAddr4Type OBJECT-TYPE The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry. | 1.3.6.1.4.1.9.6.1.101.47.1.14.1.17 | InetAddressType | read-only | current |
| rlInetFftSubNextHopInetAddr4 OBJECT-TYPE The fourth NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. | 1.3.6.1.4.1.9.6.1.101.47.1.14.1.18 | InetAddress | read-only | current |
| rlInetFftSubNextHopIfindex5 OBJECT-TYPE The fifth NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. | 1.3.6.1.4.1.9.6.1.101.47.1.14.1.19 | INTEGER | read-only | current |
| rlInetFftSubNextHopInetAddr5Type OBJECT-TYPE The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry. | 1.3.6.1.4.1.9.6.1.101.47.1.14.1.20 | InetAddressType | read-only | current |
| rlInetFftSubNextHopInetAddr5 OBJECT-TYPE The fifth NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. | 1.3.6.1.4.1.9.6.1.101.47.1.14.1.21 | InetAddress | read-only | current |
| rlInetFftSubNextHopIfindex6 OBJECT-TYPE The six NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. | 1.3.6.1.4.1.9.6.1.101.47.1.14.1.22 | INTEGER | read-only | current |
| rlInetFftSubNextHopInetAddr6Type OBJECT-TYPE The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry. | 1.3.6.1.4.1.9.6.1.101.47.1.14.1.23 | InetAddressType | read-only | current |
| rlInetFftSubNextHopInetAddr6 OBJECT-TYPE The six NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. | 1.3.6.1.4.1.9.6.1.101.47.1.14.1.24 | InetAddress | read-only | current |
| rlInetFftSubNextHopIfindex7 OBJECT-TYPE The seven NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. | 1.3.6.1.4.1.9.6.1.101.47.1.14.1.25 | INTEGER | read-only | current |
| rlInetFftSubNextHopInetAddr7Type OBJECT-TYPE The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry. | 1.3.6.1.4.1.9.6.1.101.47.1.14.1.26 | InetAddressType | read-only | current |
| rlInetFftSubNextHopInetAddr7 OBJECT-TYPE The seven NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. | 1.3.6.1.4.1.9.6.1.101.47.1.14.1.27 | InetAddress | read-only | current |
| rlInetFftSubNextHopIfindex8 OBJECT-TYPE The eight NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. | 1.3.6.1.4.1.9.6.1.101.47.1.14.1.28 | INTEGER | read-only | current |
| rlInetFftSubNextHopInetAddr8Type OBJECT-TYPE The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry. | 1.3.6.1.4.1.9.6.1.101.47.1.14.1.29 | InetAddressType | read-only | current |
| rlInetFftSubNextHopInetAddr8 OBJECT-TYPE The eight NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. | 1.3.6.1.4.1.9.6.1.101.47.1.14.1.30 | InetAddress | read-only | current |
| rlInetFftSubAge OBJECT-TYPE The age of the entry in seconds from the inserting. | 1.3.6.1.4.1.9.6.1.101.47.1.14.1.31 | INTEGER | read-only | current |
| rlInetFftCountersTable OBJECT-TYPE The (conceptual) table containing IP Counters information per one IP FFT. | 1.3.6.1.4.1.9.6.1.101.47.1.15 | not-accessible | current | |
| rlInetFftCountersEntry OBJECT-TYPE An entry (conceptual row) containing the IP Counters information containing amount of IP datagrams passed by certain IP FFT. | 1.3.6.1.4.1.9.6.1.101.47.1.15.1 | not-accessible | current | |
| rlInetFftCountersIndex OBJECT-TYPE The value of the index of the IP FFT. | 1.3.6.1.4.1.9.6.1.101.47.1.15.1.1 | INTEGER | read-only | current |
| rlInetFftInReceives OBJECT-TYPE The amount of received IP datagrams | 1.3.6.1.4.1.9.6.1.101.47.1.15.1.2 | INTEGER | read-only | current |
| rlInetFftForwDatagrams OBJECT-TYPE The amount of forwarded IP datagrams | 1.3.6.1.4.1.9.6.1.101.47.1.15.1.3 | INTEGER | read-only | current |
| rlInetFftInDiscards OBJECT-TYPE The amount of discarded IP datagrams | 1.3.6.1.4.1.9.6.1.101.47.1.15.1.4 | INTEGER | read-only | current |
| rlInetFftNextHopTable OBJECT-TYPE The (conceptual) table contains NextHop information used for routing IP datagrams. | 1.3.6.1.4.1.9.6.1.101.47.1.16 | not-accessible | current | |
| rlInetFftNextHopEntry OBJECT-TYPE An entry (conceptual row) contains the NextHop info information for routing IP datagrams. | 1.3.6.1.4.1.9.6.1.101.47.1.16.1 | not-accessible | current | |
| rlInetFftNextHopifindex OBJECT-TYPE The value of the IP Interface index of the NextHop. | 1.3.6.1.4.1.9.6.1.101.47.1.16.1.1 | INTEGER | read-only | current |
| rlInetFftNextHopInetAddressType OBJECT-TYPE The IP address type of a NextHop for which an entry contains IP forwarding information. | 1.3.6.1.4.1.9.6.1.101.47.1.16.1.2 | InetAddressType | read-only | current |
| rlInetFftNextHopInetAddress OBJECT-TYPE The IP address of a NextHop for which an entry contains IP forwarding information. | 1.3.6.1.4.1.9.6.1.101.47.1.16.1.3 | InetAddress | read-only | current |
| rlInetFftNextHopValid OBJECT-TYPE The NextHop Valid bit. When L2 info is missing, a NextHop has Invalid value. | 1.3.6.1.4.1.9.6.1.101.47.1.16.1.4 | INTEGER {valid(1), invalid(2)} | read-only | current |
| rlInetFftNextHopType OBJECT-TYPE The NextHop type. | 1.3.6.1.4.1.9.6.1.101.47.1.16.1.5 | INTEGER {local(1), remote(2), reject(3), drop(4)} | read-only | current |
| rlInetFftNextHopReferenceCount OBJECT-TYPE IF LPM is supported: If ecmp supported: the field NextHop_ref_count used to save number of NextHop SETs that use the NextHop. Otherwise, NextHop_ref_count used to save number of NFFT entries that use the NextHop. IF LPM is NOT supported: NextHop_ref_count used to save number of Remote SFFT entries that use the NextHop. | 1.3.6.1.4.1.9.6.1.101.47.1.16.1.6 | INTEGER | read-only | current |
| rlInetFftNextHopNetAddress OBJECT-TYPE The NextHop Physical Address. | 1.3.6.1.4.1.9.6.1.101.47.1.16.1.7 | PhysAddress | read-only | current |
| rlInetFftNextHopVid OBJECT-TYPE The vid of the output port. | 1.3.6.1.4.1.9.6.1.101.47.1.16.1.8 | INTEGER | read-only | current |
| rlInetFftNextHopMacAddress OBJECT-TYPE The MAC destination address. | 1.3.6.1.4.1.9.6.1.101.47.1.16.1.9 | PhysAddress | read-only | current |
| rlInetFftNextHopOutIfIndex OBJECT-TYPE The value of ifIndex of output physical port. | 1.3.6.1.4.1.9.6.1.101.47.1.16.1.10 | INTEGER | read-only | current |
| rlInetFftL2InfoTable OBJECT-TYPE The (conceptual) table contains L2 information used for routing IP datagrams. | 1.3.6.1.4.1.9.6.1.101.47.1.17 | not-accessible | current | |
| rlInetFftL2InfoEntry OBJECT-TYPE An entry (conceptual row) contains the L2 info information for routing IP datagrams. | 1.3.6.1.4.1.9.6.1.101.47.1.17.1 | not-accessible | current | |
| rlInetFftL2InfoIfindex OBJECT-TYPE The VLAN Ifindex of the destination port. | 1.3.6.1.4.1.9.6.1.101.47.1.17.1.1 | INTEGER | read-only | current |
| rlInetFftL2InfoDstMacAddress OBJECT-TYPE The MAC destination address. | 1.3.6.1.4.1.9.6.1.101.47.1.17.1.2 | PhysAddress | read-only | current |
| rlInetFftL2InfoValid OBJECT-TYPE The L2 info entry valid bit. When L2 info is missing some information, an L2 info has Invalid value. | 1.3.6.1.4.1.9.6.1.101.47.1.17.1.3 | INTEGER {valid(1), invalid(2)} | read-only | current |
| rlInetFftL2InfoType OBJECT-TYPE The L2 info type. With Enthernet media l2 info type is vlan. WIth Tunneling feature, l2 info type will be expanded. | 1.3.6.1.4.1.9.6.1.101.47.1.17.1.4 | INTEGER {other(1), vlan(2)} | read-only | current |
| rlInetFftL2InfoReferenceCount OBJECT-TYPE The reference count contains a number of NextHop entries that use this L2 info. | 1.3.6.1.4.1.9.6.1.101.47.1.17.1.5 | INTEGER | read-only | current |
| rlInetFftL2InfoVid OBJECT-TYPE The vid of the destination port. | 1.3.6.1.4.1.9.6.1.101.47.1.17.1.6 | INTEGER | read-only | current |
| rlInetFftL2InfoSrcMacAddress OBJECT-TYPE The MAC source address placed to Ehernet Header of IP forwarded packet. | 1.3.6.1.4.1.9.6.1.101.47.1.17.1.7 | PhysAddress | read-only | current |
| rlInetFftL2InfoOutIfIndex OBJECT-TYPE The value of ifIndex of output physical port the packet is forwarded through. | 1.3.6.1.4.1.9.6.1.101.47.1.17.1.8 | INTEGER | read-only | current |
| rlInetFftL2InfoTaggedMode OBJECT-TYPE The tagged value of the port. When the Tagged field is not a part of the FFT table in the ASIC, the Tagged field get the BasedPortConfig value. | 1.3.6.1.4.1.9.6.1.101.47.1.17.1.9 | INTEGER {untagged(1), tagged(2), basedPortConfig(3)} | read-only | current |
| rlIpv6FftRedBoundary OBJECT-TYPE The red boundary in percents. | 1.3.6.1.4.1.9.6.1.101.47.1.18 | Percents | read-write | current |
| rlIpv6FftYellowBoundary OBJECT-TYPE The yellow boundary in percents. | 1.3.6.1.4.1.9.6.1.101.47.1.19 | Percents | read-write | current |
| rlIpxFFT OBJECT-IDENTITY | 1.3.6.1.4.1.9.6.1.101.47.2 | |||
| rlIpxFftMibVersion OBJECT-TYPE MIB's version, the current version is 1. | 1.3.6.1.4.1.9.6.1.101.47.2.1 | INTEGER | read-only | current |
| rlIpxMaxFftNumber OBJECT-TYPE The maximun number of IPX FFTs. An IPX FFT gets a number from 1 until rlIpxMaxFftSetNumber. | 1.3.6.1.4.1.9.6.1.101.47.2.2 | INTEGER | read-only | current |
| rlIpxFftDynamicSupported OBJECT-TYPE Specifies whether dynamic IPX FFTs are supported. | 1.3.6.1.4.1.9.6.1.101.47.2.3 | INTEGER {supported(1), unsupported(2)} | read-only | current |
| rlIpxFftNetworkSupported OBJECT-TYPE Specifies whether subtable per IPX network is supported. | 1.3.6.1.4.1.9.6.1.101.47.2.4 | INTEGER {supported(1), unsupported(2)} | read-only | current |
| rlIpxFftUnknownAddrMsgUsed OBJECT-TYPE Specifies whether the 3SW uses the unknown address message. | 1.3.6.1.4.1.9.6.1.101.47.2.5 | INTEGER {used(1), unused(2)} | read-only | current |
| rlIpxFftAgingTimeSupported OBJECT-TYPE Specifies whether aging time is supported for subtable per station. | 1.3.6.1.4.1.9.6.1.101.47.2.6 | INTEGER {supported(1), unsupported(2)} | read-only | current |
| rlIpxFftSrcAddrSupported OBJECT-TYPE Specifies whether an IPX subtable per station contains source IPX address. | 1.3.6.1.4.1.9.6.1.101.47.2.7 | INTEGER {supported(1), unsupported(2)} | read-only | current |
| rlIpxFftAgingTimeout OBJECT-TYPE The aging timeout in seconds. | 1.3.6.1.4.1.9.6.1.101.47.2.8 | INTEGER | read-write | current |
| rlIpxFftRedBoundary OBJECT-TYPE The red boundary in percents. | 1.3.6.1.4.1.9.6.1.101.47.2.9 | INTEGER (1..100) | read-write | current |
| rlIpxFftYellowBoundary OBJECT-TYPE The yellow boundary in percents. | 1.3.6.1.4.1.9.6.1.101.47.2.10 | Percents | read-write | current |
| rlIpxFftNumTable OBJECT-TYPE The (conceptual) table containing number routes of the IPX Fast Forwarding Table. | 1.3.6.1.4.1.9.6.1.101.47.2.12 | not-accessible | current | |
| rlIpxFftNumEntry OBJECT-TYPE An entry (conceptual row) containing the containing number routes of of IPX SFFT and IPX NFFT | 1.3.6.1.4.1.9.6.1.101.47.2.12.1 | not-accessible | current | |
| rlIpxFftNumIndex OBJECT-TYPE The value of the index of the IPX FFT. | 1.3.6.1.4.1.9.6.1.101.47.2.12.1.1 | INTEGER | read-only | current |
| rlIpxFftNumStnRoutesNumber OBJECT-TYPE The number of routes containing in the IPX SFFT. | 1.3.6.1.4.1.9.6.1.101.47.2.12.1.2 | INTEGER | read-only | current |
| rlIpxFftNumSubRoutesNumber OBJECT-TYPE The number of routes containing in the IPX NFFT. | 1.3.6.1.4.1.9.6.1.101.47.2.12.1.3 | INTEGER | read-only | current |
| rlIpxFftStnTable OBJECT-TYPE The (conceptual) table containing IPX Fast Forwarding information per station for IPX. | 1.3.6.1.4.1.9.6.1.101.47.2.13 | not-accessible | current | |
| rlIpxFftStnEntry OBJECT-TYPE An entry (conceptual row) containing the IP fast forwarding information for IP datagrams from a particular source and destination addresses. | 1.3.6.1.4.1.9.6.1.101.47.2.13.1 | not-accessible | current | |
| rlIpxFftStnIndex OBJECT-TYPE The value of the index of the IPX FFT. | 1.3.6.1.4.1.9.6.1.101.47.2.13.1.1 | INTEGER | read-only | current |
| rlIpxFftStnDstNetid OBJECT-TYPE The destination network for which this entry contains IPX forwarding information. | 1.3.6.1.4.1.9.6.1.101.47.2.13.1.2 | NetNumber | read-only | current |
| rlIpxFftStnDstNode OBJECT-TYPE The destination node for which this entry contains IPX forwarding information. | 1.3.6.1.4.1.9.6.1.101.47.2.13.1.3 | PhysAddress | read-only | current |
| rlIpxFftStnSrcNetid OBJECT-TYPE The source network for which this entry contains IPX forwarding information. | 1.3.6.1.4.1.9.6.1.101.47.2.13.1.4 | NetNumber | read-only | current |
| rlIpxFftStnSrcNode OBJECT-TYPE The destination node for which this entry contains IPX forwarding information. | 1.3.6.1.4.1.9.6.1.101.47.2.13.1.5 | PhysAddress | read-only | current |
| rlIpxFftStnDstIpxAddrType OBJECT-TYPE The destination address type. | 1.3.6.1.4.1.9.6.1.101.47.2.13.1.6 | INTEGER {local(1), remote(2)} | read-only | current |
| rlIpxFftStnEncapsulation OBJECT-TYPE The encapsulation method associated with this route. | 1.3.6.1.4.1.9.6.1.101.47.2.13.1.7 | INTEGER {novell(1), ethernet(2), llc(3), snap(4)} | read-only | current |
| rlIpxFftStnDstMacAddress OBJECT-TYPE The MAC destination address. | 1.3.6.1.4.1.9.6.1.101.47.2.13.1.8 | PhysAddress | read-only | current |
| rlIpxFftStnSrcMacAddress OBJECT-TYPE The MAC source address. | 1.3.6.1.4.1.9.6.1.101.47.2.13.1.9 | PhysAddress | read-only | current |
| rlIpxFftStnOutIfIndex OBJECT-TYPE The value of ifIndex of output physical port. | 1.3.6.1.4.1.9.6.1.101.47.2.13.1.10 | INTEGER | read-only | current |
| rlIpxFftStnTci OBJECT-TYPE The value of TCI or 0. | 1.3.6.1.4.1.9.6.1.101.47.2.13.1.11 | INTEGER | read-only | current |
| rlIpxFftStnFacsIndex OBJECT-TYPE The value of index of the FACS Table. | 1.3.6.1.4.1.9.6.1.101.47.2.13.1.12 | INTEGER | read-only | current |
| rlIpxFftStnAge OBJECT-TYPE The age of the entry in seconds. | 1.3.6.1.4.1.9.6.1.101.47.2.13.1.13 | INTEGER | read-only | current |
| rlIpxFftSubTable OBJECT-TYPE The (conceptual) table containing IPX Fast Forwarding information per network for IPX . | 1.3.6.1.4.1.9.6.1.101.47.2.14 | not-accessible | current | |
| rlIpxFftSubEntry OBJECT-TYPE An entry (conceptual row) containing the IP fast forwarding information for IP datagrams from a particular source and destination addresses. | 1.3.6.1.4.1.9.6.1.101.47.2.14.1 | not-accessible | current | |
| rlIpxFftSubIndex OBJECT-TYPE The value of the index of the IPX FFT. | 1.3.6.1.4.1.9.6.1.101.47.2.14.1.1 | INTEGER | read-only | current |
| rlIpxFftSubDstNetid OBJECT-TYPE The destination network for which this entry contains IPX forwarding information. | 1.3.6.1.4.1.9.6.1.101.47.2.14.1.2 | NetNumber | read-only | current |
| rlIpxFftSubEncapsulation OBJECT-TYPE The encapsulation method associated with this route. | 1.3.6.1.4.1.9.6.1.101.47.2.14.1.3 | INTEGER {novell(1), ethernet(2), llc(3), snap(4)} | read-only | current |
| rlIpxFftSubDstMacAddress OBJECT-TYPE The MAC destination address. | 1.3.6.1.4.1.9.6.1.101.47.2.14.1.4 | PhysAddress | read-only | current |
| rlIpxFftSubSrcMacAddress OBJECT-TYPE The MAC source address. | 1.3.6.1.4.1.9.6.1.101.47.2.14.1.5 | PhysAddress | read-only | current |
| rlIpxFftSubOutIfIndex OBJECT-TYPE The value of ifIndex of output physical port. | 1.3.6.1.4.1.9.6.1.101.47.2.14.1.6 | INTEGER | read-only | current |
| rlIpxFftSubTci OBJECT-TYPE The value of TCI or 0. | 1.3.6.1.4.1.9.6.1.101.47.2.14.1.7 | INTEGER | read-only | current |
| rlIpxFftSubFacsIndex OBJECT-TYPE The value of index of the FACS Table. | 1.3.6.1.4.1.9.6.1.101.47.2.14.1.8 | INTEGER | read-only | current |
| rlIpxFftSubAge OBJECT-TYPE The age of the entry in seconds. | 1.3.6.1.4.1.9.6.1.101.47.2.14.1.9 | INTEGER | read-only | current |
| rlIpxFftCountersTable OBJECT-TYPE The (conceptual) table containing IPX Counters information per one IPX FFT. | 1.3.6.1.4.1.9.6.1.101.47.2.15 | not-accessible | current | |
| rlIpxFftCountersEntry OBJECT-TYPE An entry (conceptual row) containing the IP Counters information containing amount of IPX datagrams passed by certain IPX FFT. | 1.3.6.1.4.1.9.6.1.101.47.2.15.1 | not-accessible | current | |
| rlIpxFftCountersIndex OBJECT-TYPE The value of the index of the IPX FFT. | 1.3.6.1.4.1.9.6.1.101.47.2.15.1.1 | INTEGER | read-only | current |
| rlIpxFftInReceives OBJECT-TYPE The amount of received IPX datagrams | 1.3.6.1.4.1.9.6.1.101.47.2.15.1.2 | INTEGER | read-only | current |
| rlIpxFftForwDatagrams OBJECT-TYPE The amount of forwarded IPX datagrams | 1.3.6.1.4.1.9.6.1.101.47.2.15.1.3 | INTEGER | read-only | current |
| rlIpxFftInDiscards OBJECT-TYPE The amount of discarded IPX datagrams | 1.3.6.1.4.1.9.6.1.101.47.2.15.1.4 | INTEGER | read-only | current |
| rlIpmFFT OBJECT-IDENTITY | 1.3.6.1.4.1.9.6.1.101.47.3 | |||
| rlIpmFftMibVersion OBJECT-TYPE MIB's version, the current version is 1. | 1.3.6.1.4.1.9.6.1.101.47.3.1 | INTEGER | read-only | current |
| rlIpmMaxFftNumber OBJECT-TYPE The maximun number of IPM FFTs. NT_IPM gets a number from Host Parameters | 1.3.6.1.4.1.9.6.1.101.47.3.2 | INTEGER | read-only | current |
| rlIpmFftDynamicSupported OBJECT-TYPE Specifies whether dynamic IPM FFTs are supported. An NT_IPM gets a number from Host Parameters | 1.3.6.1.4.1.9.6.1.101.47.3.3 | INTEGER {supported(1), unsupported(2)} | read-only | current |
| rlIpmFftUnknownAddrMsgUsed OBJECT-TYPE Specifies whether the 3SW uses the unknown address message. An NT_IPM gets a number from Host Parameters | 1.3.6.1.4.1.9.6.1.101.47.3.4 | INTEGER {used(1), unused(2)} | read-only | current |
| rlIpmFftUserAgingTimeout OBJECT-TYPE The aging timeout in seconds. SNMP user writes. There is a default value of aging timeout. | 1.3.6.1.4.1.9.6.1.101.47.3.5 | Unsigned32 | read-write | current |
| rlIpmFftRouterAgingTimeout OBJECT-TYPE The aging timeout in seconds. NT_IPM keeps value that Router level gave. This is high priority value for aging timeout. | 1.3.6.1.4.1.9.6.1.101.47.3.6 | INTEGER | read-only | current |
| rlIpmFftNumTable OBJECT-TYPE The (conceptual) table containing number routes of the IPM Fast Forwarding Table. | 1.3.6.1.4.1.9.6.1.101.47.3.8 | not-accessible | current | |
| rlIpmFftNumEntry OBJECT-TYPE An entry (conceptual row) containing the containing number routes of an IPM FFT. | 1.3.6.1.4.1.9.6.1.101.47.3.8.1 | not-accessible | current | |
| rlIpmFftNumIndex OBJECT-TYPE The value of the index of the IPM FFT. | 1.3.6.1.4.1.9.6.1.101.47.3.8.1.1 | INTEGER | read-only | current |
| rlIpmFftNumRoutesNumber OBJECT-TYPE The number of routes containing in the IPM FFT. | 1.3.6.1.4.1.9.6.1.101.47.3.8.1.2 | INTEGER | read-only | current |
| rlIpmFftTable OBJECT-TYPE The (conceptual) table containing IPM Fast Forwarding information for IPM datagrams. | 1.3.6.1.4.1.9.6.1.101.47.3.9 | not-accessible | current | |
| rlIpmFftEntry OBJECT-TYPE An entry (conceptual row) containing the IPM fast forwarding information for IP datagrams from a particular source and destination addresses. | 1.3.6.1.4.1.9.6.1.101.47.3.9.1 | not-accessible | current | |
| rlIpmFftIndex OBJECT-TYPE The value of the index of the IPM FFT. | 1.3.6.1.4.1.9.6.1.101.47.3.9.1.1 | INTEGER | read-only | current |
| rlIpmFftSrcIpAddress OBJECT-TYPE The IP source address for which this entry contains IPM forwarding information. | 1.3.6.1.4.1.9.6.1.101.47.3.9.1.2 | IpAddress | read-only | current |
| rlIpmFftDstIpAddress OBJECT-TYPE The IPM destination address for which this entry contains IPM forwarding information. | 1.3.6.1.4.1.9.6.1.101.47.3.9.1.3 | IpAddress | read-only | current |
| rlIpmFftSrcIpMask OBJECT-TYPE The IP source mask for which this entry contains IP forwarding information. | 1.3.6.1.4.1.9.6.1.101.47.3.9.1.4 | IpAddress | read-only | current |
| rlIpmFftInputIfIndex OBJECT-TYPE The input ifIndex for which this entry contains IPM forwarding information. | 1.3.6.1.4.1.9.6.1.101.47.3.9.1.5 | INTEGER | read-only | current |
| rlIpmFftInputVlanTag OBJECT-TYPE The input Vlan tag together with input ifIndex defines pair (ifIndex, tag) | 1.3.6.1.4.1.9.6.1.101.47.3.9.1.6 | INTEGER | read-only | current |
| rlIpmFftForwardAction OBJECT-TYPE The IPM forward action. | 1.3.6.1.4.1.9.6.1.101.47.3.9.1.7 | INTEGER {forward(1), discard(2)} | read-only | current |
| rlIpmFftInportAction OBJECT-TYPE The IPM illegal input port action. | 1.3.6.1.4.1.9.6.1.101.47.3.9.1.8 | INTEGER {sentToCPU(1), discard(2)} | read-only | current |
| rlIpmFftAge OBJECT-TYPE The age of the entry in seconds from the moment of inserting. | 1.3.6.1.4.1.9.6.1.101.47.3.9.1.9 | INTEGER | read-only | current |
| rlIpmFftPortTagTable OBJECT-TYPE The (conceptual) table containing IPM FFT output port tag information for IPM datagrams. | 1.3.6.1.4.1.9.6.1.101.47.3.10 | not-accessible | current | |
| rlIpmFftPortTagEntry OBJECT-TYPE An entry (conceptual row) containing the IPM FFT output port tag information for IP datagrams from a particular source and destination addresses. | 1.3.6.1.4.1.9.6.1.101.47.3.10.1 | not-accessible | current | |
| rlIpmFftPortIndex OBJECT-TYPE The value of the index of the IPM FFT. | 1.3.6.1.4.1.9.6.1.101.47.3.10.1.1 | INTEGER | read-only | current |
| rlIpmFftPortSrcIpAddress OBJECT-TYPE The IP source address for which this entry contains IPM output port tag information. | 1.3.6.1.4.1.9.6.1.101.47.3.10.1.2 | IpAddress | read-only | current |
| rlIpmFftPortDstIpAddress OBJECT-TYPE The IPM destination address for which this entry contains IPM port tag information. | 1.3.6.1.4.1.9.6.1.101.47.3.10.1.3 | IpAddress | read-only | current |
| rlIpmFftPortOutputifIndex OBJECT-TYPE The output ifIndex | 1.3.6.1.4.1.9.6.1.101.47.3.10.1.4 | INTEGER | read-only | current |
| rlIpmFftPortOutputTag OBJECT-TYPE The output Vlan tag together with output ifIndex defines pair (ifIndex, tag) | 1.3.6.1.4.1.9.6.1.101.47.3.10.1.5 | INTEGER | read-only | current |
| rlIpmFftCountersTable OBJECT-TYPE The (conceptual) table containing IPM Counters information per FFT number. | 1.3.6.1.4.1.9.6.1.101.47.3.11 | not-accessible | current | |
| rlIpmFftCountersEntry OBJECT-TYPE An entry (conceptual row) containing the IPM Counters information containing amount of IPM datagrams passed by certain FFT. | 1.3.6.1.4.1.9.6.1.101.47.3.11.1 | not-accessible | current | |
| rlIpmFftCountersIndex OBJECT-TYPE The value of the index of the IPM FFT. | 1.3.6.1.4.1.9.6.1.101.47.3.11.1.1 | INTEGER | read-only | current |
| rlIpmFftInReceives OBJECT-TYPE The amount of received IPM datagrams | 1.3.6.1.4.1.9.6.1.101.47.3.11.1.2 | INTEGER | read-only | current |
| rlIpmFftForwDatagrams OBJECT-TYPE The amount of forwarded IPM datagrams | 1.3.6.1.4.1.9.6.1.101.47.3.11.1.3 | INTEGER | read-only | current |
| rlIpmFftInDiscards OBJECT-TYPE The amount of discarded IPM datagrams | 1.3.6.1.4.1.9.6.1.101.47.3.11.1.4 | INTEGER | read-only | current |