CISCOSB-TRUNK-MIB
- Registered at
- 1.3.6.1.4.1.9.6.1.101.65
- Last updated
- 2006-12-02 00:00
- Organization
- Cisco Systems, Inc.
- Revisions
- 2006-12-02 00:00
- Namespace
- cisco
- Source file
CISCOSB-TRUNK-MIB- Digest
sha256:38e9c28c5016e6f05ada59cc2913b5343f345589a634220ed6960fd69c5de039
Description
The private MIB module definition for trunk support in CISCOSB devices.
Contact
Postal: 170 West Tasman Drive San Jose , CA 95134-1706 USA Website: Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>
Imports
| From | Symbols |
|---|---|
| CISCOSB-MIB | switch001 |
| IEEE8023-LAG-MIB | dot3adAggIndex, dot3adAggPortIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
BRIDGE-MIB CISCOSB-MIB CISCOSB-TRUNK-MIB IANAifType-MIB IEEE8023-LAG-MIB IF-MIB P-BRIDGE-MIB Q-BRIDGE-MIB RFC1158-MIB RFC1271-MIB RMON-MIB RMON2-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC TOKEN-RING-RMON-MIB
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| rlDot3adAggMibVersion OBJECT-TYPE MIB's version, the current version is 1. | 1.3.6.1.4.1.9.6.1.101.65.1 | INTEGER | read-only | current |
| rlDot3adAggBalanceTable OBJECT-TYPE An entry of this table specifies a balancing criterion used for the corresponding dot3adAggIndex. | 1.3.6.1.4.1.9.6.1.101.65.2 | not-accessible | current | |
| rlDot3adAggBalanceEntry OBJECT-TYPE A list of information for each dot3adAggIndex. | 1.3.6.1.4.1.9.6.1.101.65.2.1 | not-accessible | current | |
| rlDot3adAggBalanceForwardType OBJECT-TYPE A Forwarding type: Bridging or Routing. | 1.3.6.1.4.1.9.6.1.101.65.2.1.1 | INTEGER {bridging(1), routing(2)} | read-only | current |
| rlDot3adAggBalanceLayer OBJECT-TYPE A Network Layer Number, may have the following values: 2, 3 or 4. The default value is: Bridging: 2 Routing: 3. | 1.3.6.1.4.1.9.6.1.101.65.2.1.2 | INTEGER | read-write | current |
| rlDot3adAggBalanceUsedAddresses OBJECT-TYPE Specifies the Network Layer addresses used for Balancing of unicast frames. The function sets the criterion (by layer and used address in it). | 1.3.6.1.4.1.9.6.1.101.65.2.1.3 | INTEGER {notApplied(0), dstAddr(1), srcAddr(2), dstAndSrcAddr(3), vlanId(4), ethType(5)} | read-write | current |
| rlDot3adAggBalanceBroadcastType OBJECT-TYPE Specifies a balancing criterion used for L2 broadcast and unknown frames: common: a link allocated for broadcast and unknown frames is used for unicast frames too dedicated: a link allocated for broadcast and unknown frames is not used for unicast frames | 1.3.6.1.4.1.9.6.1.101.65.2.1.4 | INTEGER {common(0), dedicated(1)} | read-write | current |
| rlDot3adAggNumOfTrunks OBJECT-TYPE The number of trunks supported by the device. | 1.3.6.1.4.1.9.6.1.101.65.3 | INTEGER | read-only | current |
| rlDot3adAggMaxPortsInTrunks OBJECT-TYPE The maximun number of ports in a trunk. | 1.3.6.1.4.1.9.6.1.101.65.4 | INTEGER | read-only | current |
| rlDot3adAggTrunkCreationSupport OBJECT-TYPE Specifies if there is support to rldot3adAggCreationTable, and the type of the support: supportedTrunkOrLacp - ports that are members in some trunk are belongs to it by manual configuration or by lacp, but not togther. notSupported - there is not support to rldot3adAggCreationTable. | 1.3.6.1.4.1.9.6.1.101.65.5 | INTEGER {notSupported(0), supportsTrunkOrLacp(1)} | read-write | current |
| rlDot3adAggCreationTable OBJECT-TYPE An entry of this table is for creation of an aggregator for the corresponding dot3adAggIndex, when the value of the rlDot3adAggCreationSupport is diffrent from notSupported. | 1.3.6.1.4.1.9.6.1.101.65.6 | not-accessible | current | |
| rlDot3adAggCreationEntry OBJECT-TYPE An information for each dot3adAggIndex. | 1.3.6.1.4.1.9.6.1.101.65.6.1 | not-accessible | current | |
| rlDot3adAggCreationTrunk OBJECT-TYPE The aggregator can aggregate ports in manual configuration. | 1.3.6.1.4.1.9.6.1.101.65.6.1.1 | TruthValue | read-write | current |
| rlDot3adAggCreationLacp OBJECT-TYPE The aggregator can aggregate ports by lacp. | 1.3.6.1.4.1.9.6.1.101.65.6.1.2 | TruthValue | read-write | current |
| rlDot3adAggLoadBalancingPerTrunk OBJECT-TYPE Specifies if load balancing is defined per trunk or per device. | 1.3.6.1.4.1.9.6.1.101.65.7 | TruthValue | read-only | current |
| rlDot3adAggPortLacpTable OBJECT-TYPE An entry of this table specifies lacp protocol state and statistics for the corresponding dot3adAggPortIndex. | 1.3.6.1.4.1.9.6.1.101.65.8 | not-accessible | current | |
| rlDot3adAggPortLacpEntry OBJECT-TYPE A list of information for each dot3adAggPortIndex. | 1.3.6.1.4.1.9.6.1.101.65.8.1 | not-accessible | current | |
| rlDot3adAggPortLacpPdusRx OBJECT-TYPE The number of valid LACPDUs received on this Aggregation Port. This value is read-only. | 1.3.6.1.4.1.9.6.1.101.65.8.1.1 | Counter32 | read-only | current |
| rlDot3adAggPortLacpPDUsTx OBJECT-TYPE The number of LACPDUs transmitted on this Aggregation Port. This value is read-only. | 1.3.6.1.4.1.9.6.1.101.65.8.1.2 | Counter32 | read-only | current |
| rlDot3adAggPortLacpRxState OBJECT-TYPE This attribute holds the value 'current' if the Receive state machine for the Aggregation Port is in the CURRENT state, 'expired' if the Receive state machine is in the EXPIRED state, 'defaulted' if the Receive state machine is in the DEFAULTED state, 'initialize' if the Receive state machine is in the INITIALIZE state, 'portDisabled' if the Receive state machine is in the PORT_DISABLED state, or 'lacpDisabled' if the Receive state machine is in the LACP_DISABLED state. This value is read-only. | 1.3.6.1.4.1.9.6.1.101.65.8.1.3 | INTEGER {current(1), expired(2), defaulted(3), initialize(4), portDisabled(5), lacpDisabled(6)} | read-only | current |
| rlDot3adAggPortLacpMuxState OBJECT-TYPE This attribute holds the value 'detached' if the Mux state machine for the Aggregation Port is in the DETACHED state, 'waiting' if the Mux state machine is in the WAITING state, 'attached' if the Mux state machine for the Aggregation Port is in the ATTACHED state, 'collecting' if the Mux state machine for the Aggregation Port is in the COLLECTING state, 'distributing' if the Mux state machine for the Aggregation Port is in the DISTRIBUTING state, and 'collecting_ distributing' if the Mux state machine for the Aggregation Port is in the COLLECTING_DISTRIBUTING state. This value is read-only. | 1.3.6.1.4.1.9.6.1.101.65.8.1.4 | INTEGER {detached(1), waiting(2), attached(3), collecting(4), distributing(5), collectingDistributing(6)} | read-only | current |
| rlDot3adAggPortLacpPeriodicState OBJECT-TYPE This attribute holds the value 'noPeriodic' if the Periodic state machine for the Aggregation Port is in the NO_PERIODIC state, 'fastPeriodic' if the Mux state machine is in the FAST_PERIODIC state, 'slowPeriodic' if the Mux state machine for the Aggregation Port is in the SLOW_PERIODIC state, or 'periodicTx' if the Periodic state machine for the Aggregation Port is in the PERIODIC_TX state. This value is read-only. | 1.3.6.1.4.1.9.6.1.101.65.8.1.5 | INTEGER {noPeriodic(1), fastPeriodic(2), slowPeriodic(3), periodicTx(4)} | read-only | current |
| rlDot3adAggPortLacpSelected OBJECT-TYPE This attribute holds the value 'unselected' if the Selected variable for the Aggregation Port is set to UNSELECTED, 'selected' if the Selected variable for the Aggregation Port is set to SELECTED, or 'waiting' if the Selected variable for the Aggregation Port is set to WAITING. This value is read-only. | 1.3.6.1.4.1.9.6.1.101.65.8.1.6 | INTEGER {unselected(1), selected(2), waiting(3)} | read-only | current |
| rlDot3adAggPortLacpReady OBJECT-TYPE A read-only Boolean value indicating whether the Aggregation Port is in the WAITING state in the Mux state machine and its wait_while_timer has expired ('TRUE'). otherwise, its valus is 'FALSE'. | 1.3.6.1.4.1.9.6.1.101.65.8.1.7 | TruthValue | read-only | current |
| rlDot3adAggPortLacpPortMoved OBJECT-TYPE A read-only Boolean value indicating whether the Partner_Oper_System or Partner_Oper_Port_Number in use by the Aggregation Port has been changed in an incoming LACPDU ('TRUE'). otherwise, its valus is 'FALSE'. | 1.3.6.1.4.1.9.6.1.101.65.8.1.8 | TruthValue | read-only | current |
| rlDot3adAggPortLacpNNT OBJECT-TYPE A read-only Boolean value indicating whether there is a new protocol information that should be transmitted on the link, or that the Partner needs to be reminded of the old information. otherwise, its valus is 'FALSE'. | 1.3.6.1.4.1.9.6.1.101.65.8.1.9 | TruthValue | read-only | current |
| rlDot3adAggPortLacpPeriodicTxTimer OBJECT-TYPE The amount of time in seconds remaining before the Periodeic Tx timer will expire. This value is read-only. | 1.3.6.1.4.1.9.6.1.101.65.8.1.10 | INTEGER | read-only | current |
| rlDot3adAggPortLacpCurrentWhileTimer OBJECT-TYPE The amount of time in seconds remaining before the Current While timer will expire. This value is read-only. | 1.3.6.1.4.1.9.6.1.101.65.8.1.11 | INTEGER | read-only | current |
| rlDot3adAggPortLacpWaitWhileTimer OBJECT-TYPE The amount of time in seconds remaining before the Wait While timer will expire. This value is read-only. | 1.3.6.1.4.1.9.6.1.101.65.8.1.12 | INTEGER | read-only | current |
| rlDot3adAggLacpMembershipRestrictionsSupport OBJECT-TYPE Specifies if there is support to rlDot3adAggLacpMembershipRestrictionsTable. | 1.3.6.1.4.1.9.6.1.101.65.9 | TruthValue | read-write | current |
| rlDot3adAggLacpMembershipRestrictionsTable OBJECT-TYPE An entry of this table specifies membership restrictions for ports that lacp is enbaled on them, and try to attach to the corresponding dot3adAggIndex. | 1.3.6.1.4.1.9.6.1.101.65.10 | not-accessible | current | |
| rlDot3adAggLacpMembershipRestrictionsEntry OBJECT-TYPE A list of information for each dot3adAggIndex. | 1.3.6.1.4.1.9.6.1.101.65.10.1 | not-accessible | current | |
| rlDot3adAggLacpMembershipRestrictionsPartnerAdminKey OBJECT-TYPE This variable specifies the administrative key of the remote LACP aggregator. A value of 0 is returned if the value of the variable hasn't been set. | 1.3.6.1.4.1.9.6.1.101.65.10.1.1 | Unsigned32 (0..65535) | read-write | current |
| rlDot3adAggLacpMembershipRestrictionsSpeedAdminMode OBJECT-TYPE This variable specifies the required speed of the LACP aggregator in bits per second. A value of 10 is returned for 10G. A value of 0 is returned if the value of the variable hasn't been set. | 1.3.6.1.4.1.9.6.1.101.65.10.1.2 | Unsigned32 | read-write | current |
| rlDot3adAggLacpMembershipRestrictionsPartnerAdminSystemId OBJECT-TYPE This variable specifies the administrative MAC Address of the remote LACP aggregator. A null mac address is returned if the value of the variable hasn't been set. | 1.3.6.1.4.1.9.6.1.101.65.10.1.3 | PhysAddress | read-write | current |
| rlDot3adAggLacpMembershipRestrictionsPartnerAdminSystemPriority OBJECT-TYPE This variable specifies the administrative System Priority of the remote LACP aggregator. A value of 0 is returned if the value of the variable hasn't been set. | 1.3.6.1.4.1.9.6.1.101.65.10.1.4 | Unsigned32 (0..65535) | read-write | current |
| rlDot3adAggLacpMembershipRestrictionsIndividualAggregator OBJECT-TYPE This variable specifies if the lacp aggregator represents an Aggregate ('FALSE') or an Individual link ('TRUE'). | 1.3.6.1.4.1.9.6.1.101.65.10.1.5 | TruthValue | read-write | current |
| rlDot3adAggLacpSystemPriority OBJECT-TYPE indicates the system priority value of ports and trunk in LACP. | 1.3.6.1.4.1.9.6.1.101.65.11 | INTEGER (1..65535) | read-write | current |