CISCOSB-Redistribute
- Registered at
- 1.3.6.1.4.1.9.6.1.101.26.27
- Namespace
- cisco
- Source file
CISCOSB-Redistribute- Digest
sha256:8d21eaccf41e5028ce804d26eb3438adbbbd555bc39b3061fd9a527c33c3fd7a
Imports
| From | Symbols |
|---|---|
| CISCOSB-IP | ipSpec |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCOSB-IP CISCOSB-MIB CISCOSB-Redistribute IANA-RTPROTO-MIB IANAifType-MIB IF-MIB INET-ADDRESS-MIB IP-FORWARD-MIB IP-MIB RIPv2-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| RlRedistDstProtocol TEXTUAL-CONVENTION Destination Protocol | current | |||
| RlRedistMatchType TEXTUAL-CONVENTION Match Type Bit Map that defines the criteria by which OSPF routes are redistributed into other routing domains. | current | |||
| RlRedistMetricType TEXTUAL-CONVENTION Metric Type | current | |||
| RlRedistSrcProtocol TEXTUAL-CONVENTION Source Protocol this defines the list of sources that redistribute their routes | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| rlRedistribute OBJECT-IDENTITY | 1.3.6.1.4.1.9.6.1.101.26.27 | |||
| rlRedistTable OBJECT-TYPE Using a routing protocol to advertise routes that are learned by some other means, such as by another routing protocol, static routes, or directly connected routes, is called redistribution. This table is used to configure under which conditions will redistribution occur and which actions (if any) should be done on redistributed route. | 1.3.6.1.4.1.9.6.1.101.26.27.1 | not-accessible | current | |
| rlRedistEntry OBJECT-TYPE . | 1.3.6.1.4.1.9.6.1.101.26.27.1.1 | not-accessible | current | |
| rlRedistDstProtocol OBJECT-TYPE The protocol to which the routes are exported to | 1.3.6.1.4.1.9.6.1.101.26.27.1.1.1 | RlRedistDstProtocol | not-accessible | current |
| rlRedistSrcProtocol OBJECT-TYPE The protocol from which the routes are imported from | 1.3.6.1.4.1.9.6.1.101.26.27.1.1.2 | RlRedistSrcProtocol | not-accessible | current |
| rlRedistDstProcessId OBJECT-TYPE Parameter semantic differs according to rlRedistDstProtocol. in OSPF this is an appropriate OSPF process ID to which routes are to be redistributed | 1.3.6.1.4.1.9.6.1.101.26.27.1.1.3 | INTEGER (0..65535) | not-accessible | current |
| rlRedistSrcProcessId OBJECT-TYPE Parameter semantic differs according to rlRedistSrcProtocol. in BGP and EIGRP keyword, this is an autonomous system number, in range 1 to 65535.. in OSPF, this is an appropriate OSPF process ID from which routes are to be redistributed. 0 means no process ID | 1.3.6.1.4.1.9.6.1.101.26.27.1.1.4 | INTEGER (0..65535) | not-accessible | current |
| rlRedistMatchType OBJECT-TYPE Applicable only when rlRedistSrcProtocol is OSPF defines the criteria by which OSPF routes are redistributed into other routing domains. It can be one of the following: rlRedistMatchTypeInternal - Routes that are internal to a specific autonomous system. rlRedistMatchTypeExternalTwo - Routes that are external to the autonomous system, but are imported into OSPF as Type 2 external route. rlRedistMatchTypeExternalOne - Routes that are external to the autonomous system, but are imported into OSPF as Type 1 external route. | 1.3.6.1.4.1.9.6.1.101.26.27.1.1.5 | RlRedistMatchType | not-accessible | current |
| rlRedistRoutMapName OBJECT-TYPE Specifies the route map that should be interrogated to filter the importation of routes from this source routing protocol to the current routing protocol. If not specified, all routes are redistributed. If this keyword is specified, but no route map tags are listed, no routes will be imported. | 1.3.6.1.4.1.9.6.1.101.26.27.1.1.6 | DisplayString (SIZE(0..32)) | not-accessible | current |
| rlRedistAsNumber OBJECT-TYPE Autonomous system number for the redistributed route. Number in range from 1 to 65535. 0 means no AS number defined | 1.3.6.1.4.1.9.6.1.101.26.27.1.1.7 | INTEGER (0..65535) | read-write | current |
| rlRedistMetricTransparent OBJECT-TYPE Redistribute routes without changing the metric | 1.3.6.1.4.1.9.6.1.101.26.27.1.1.8 | TruthValue | read-write | current |
| rlRedistMetricValue OBJECT-TYPE When redistributing from one OSPF process to another OSPF process on the same router, the metric will be carried through from one process to the other if no metric value is specified. When redistributing other processes to an OSPF process, the default metric is 20 when no metric value is specified. | 1.3.6.1.4.1.9.6.1.101.26.27.1.1.9 | INTEGER | read-write | current |
| rlRedistMetricType OBJECT-TYPE Parameter semantic differs according to rlRedistSrcProtocol. In OSPF specifies the external link type associated with the default route advertised into the OSPF routing domain. It can be one of two values: 1 - Type 1 external route 2 - Type 2 external route | 1.3.6.1.4.1.9.6.1.101.26.27.1.1.10 | RlRedistMetricType | read-write | current |
| rlRedistSubnets OBJECT-TYPE For redistributing routes into OSPF, the scope of redistribution for the specified protocol | 1.3.6.1.4.1.9.6.1.101.26.27.1.1.11 | TruthValue | read-write | current |
| rlRedistOnlyNSSA OBJECT-TYPE Sets the nssa-only attribute for all routes redistributed into OSPF. | 1.3.6.1.4.1.9.6.1.101.26.27.1.1.12 | TruthValue | read-write | current |
| rlRedistRowStatus OBJECT-TYPE Row Status | 1.3.6.1.4.1.9.6.1.101.26.27.1.1.13 | RowStatus | read-create | current |