MIBs Depot

CISCOSB-POE-MIB

Registered at
1.3.6.1.4.1.9.6.1.101.108
Last updated
2009-11-26 00:00
Organization
Cisco Systems, Inc.
Revisions
2010-06-02 00:00, 2009-11-26 00:00
Namespace
cisco
Source file
CISCOSB-POE-MIB
Digest
sha256:3df52154514f55c191a7a570b2c2983e00b6eb1ffa8f5bab00ad2bc5d8508a33

Description

Add a new field in the PoE MIB to indicate Max power allocation allowed

Contact

Postal: 170 West Tasman Drive San Jose , CA 95134-1706 USA Website: Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>

Imports

FromSymbols
CISCOSB-MIBswitch001
IF-MIBInterfaceIndex, InterfaceIndexOrZero
Q-BRIDGE-MIBPortList
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIMODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BRIDGE-MIB
CISCOSB-MIB
CISCOSB-POE-MIB
IANAifType-MIB
IF-MIB
P-BRIDGE-MIB
Q-BRIDGE-MIB
RFC1158-MIB
RFC1271-MIB
RMON-MIB
RMON2-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
TOKEN-RING-RMON-MIB

Textual conventions

NameOIDSyntaxAccessStatus
RlPoeType
TEXTUAL-CONVENTION
PoE types: 1 - none: no PoE, unknown type; 2 - PoE: Standard AF PoE 3 - PoE Plus: Standard AT PoE 4 - 60 W: 60W poe port 5 - PoE BT: 802.3BT standard
current

Objects

NameOIDSyntaxAccessStatus
rlPethPsePortTable
OBJECT-TYPE
The table listing additional information for Power Over Ethernet ports.
1.3.6.1.4.1.9.6.1.101.108.1not-accessiblecurrent
rlPethPsePortEntry
OBJECT-TYPE
An entry in the rlPethPsePortTable.
1.3.6.1.4.1.9.6.1.101.108.1.1not-accessiblecurrent
rlPethPsePortGroupIndex
OBJECT-TYPE
This variable uniquely identifies the group containing the port to which a power Ethernet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for non-modular devices. Furthermore, the same value MUST be used in this variable, pethMainPseGroupIndex, and pethNotificationControlGroupIndex to refer to a given box in a stack or module in the rack.
1.3.6.1.4.1.9.6.1.101.108.1.1.1INTEGER (1..2147483647)not-accessiblecurrent
rlPethPsePortIndex
OBJECT-TYPE
This variable uniquely identifies the power Ethernet PSE port within group pethPsePortGroupIndex to which the power Ethernet PSE entry is connected.
1.3.6.1.4.1.9.6.1.101.108.1.1.2INTEGER (1..2147483647)not-accessiblecurrent
rlPethPsePortOutputVoltage
OBJECT-TYPE
This variable indicates on the output voltage level in milli volts from rlPethPsePortIndex.
1.3.6.1.4.1.9.6.1.101.108.1.1.3INTEGER (0..2147483647)read-onlycurrent
rlPethPsePortOutputCurrent
OBJECT-TYPE
This variable indicates on the output current level in milli amper from rlPethPsePortIndex.
1.3.6.1.4.1.9.6.1.101.108.1.1.4INTEGER (0..2147483647)read-onlycurrent
rlPethPsePortOutputPower
OBJECT-TYPE
This variable indicates on the output power level in milli watts from rlPethPsePortIndex.
1.3.6.1.4.1.9.6.1.101.108.1.1.5INTEGER (0..2147483647)read-onlycurrent
rlPethPsePortPowerLimit
OBJECT-TYPE
This variable indicates on the user configured power level in milli watts which is available from rlPethPsePortIndex.
1.3.6.1.4.1.9.6.1.101.108.1.1.6INTEGER (0..2147483647)read-writecurrent
rlPethPsePortStatus
OBJECT-TYPE
This variable indicates on the hardware status of rlPethPsePortIndex.
1.3.6.1.4.1.9.6.1.101.108.1.1.7INTEGER (0..2147483647)read-onlycurrent
rlPethPsePortStatusDescription
OBJECT-TYPE
This variable indicates the description of the hardware status of rlPethPsePortIndex.
1.3.6.1.4.1.9.6.1.101.108.1.1.8DisplayString (SIZE(0..120))read-onlycurrent
rlPethPsePortOperPowerLimit
OBJECT-TYPE
This variable indicates the maximum power level in milli watts which is available from rlPethPsePortIndex.
1.3.6.1.4.1.9.6.1.101.108.1.1.9INTEGER (0..2147483647)read-onlycurrent
rlPethPsePortTimeRangeName
OBJECT-TYPE
This variable is used to bind PoE port to time range.
1.3.6.1.4.1.9.6.1.101.108.1.1.10DisplayString (SIZE(0..32))read-writecurrent
rlPethPsePortOperStatus
OBJECT-TYPE
This Read-Only variable indicates PoE port current status affected by time range active/inactive and admin status.
1.3.6.1.4.1.9.6.1.101.108.1.1.11TruthValueread-onlycurrent
rlPethPsePortMaxPowerAllocAllowed
OBJECT-TYPE
This variable indicates the maximum power allocation allowed per port (including wire power loses) in milli-watts which is available from rlPethPsePortIndex.
1.3.6.1.4.1.9.6.1.101.108.1.1.12INTEGER (0..2147483647)read-onlycurrent
rlPethPsePortSupportPoeType
OBJECT-TYPE
This variable indicates the supported type of the PoE port
1.3.6.1.4.1.9.6.1.101.108.1.1.13RlPoeTyperead-onlycurrent
rlPethPsePortLinkPartnerPoeType
OBJECT-TYPE
This variable indicates the link partner PoE type.
1.3.6.1.4.1.9.6.1.101.108.1.1.14RlPoeTyperead-onlycurrent
rlPethPsePortFourPairForced
OBJECT-TYPE
This variable enabled the spare pair ALT_B in 60W port to force 4 pair enable.
1.3.6.1.4.1.9.6.1.101.108.1.1.15INTEGER {forcedEnable(0), forcedDisable(1)}read-writecurrent
rlPethPsePortFourPairEnabled
OBJECT-TYPE
This variable indicates that spare pair ALT_B is enable.
1.3.6.1.4.1.9.6.1.101.108.1.1.16INTEGER {fourPairEnable(1), fourPairDisable(2)}read-onlycurrent
rlPethPsePortNegotiationAllocatedPower
OBJECT-TYPE
This variable indicates the power allocation in milli watts from power negotiation
1.3.6.1.4.1.9.6.1.101.108.1.1.17INTEGER (0..2147483647)read-onlycurrent
rlPethPsePortNegotiationProtocolOwner
OBJECT-TYPE
This variable indicates the protocol owner on power management negotiation protocol
1.3.6.1.4.1.9.6.1.101.108.1.1.18INTEGER {protocolOwnerNone(0), protocolOwnerCDP(1), protocolOwnerLLDP(2), protocolOwnerCDPExpired(3), protocolOwnerLLDPExpired(4)}read-onlycurrent
rlPethPsePortLegacySupport
OBJECT-TYPE
This variable identifies poe Legacy per port configuration mode
1.3.6.1.4.1.9.6.1.101.108.1.1.19INTEGER {not-relevant(0), enabled(1), disabled(2)}read-writecurrent
rlPethPsePortHighPowerModeEnable
OBJECT-TYPE
This variable identifies poe port high power configuration mode
1.3.6.1.4.1.9.6.1.101.108.1.1.20INTEGER {not-relevant(0), enabled(1), disabled(2)}read-writecurrent
rlPethPsePortMenagementMode
OBJECT-TYPE
This variable identifies poe power management mode configuration mode
1.3.6.1.4.1.9.6.1.101.108.1.1.21INTEGER {not-relevant(0), dynamic(1), static(2)}read-writecurrent
rlPethPsePortStaticPowerAllocation
OBJECT-TYPE
This variable indicates PoE Static power allocation. Static power allocation can be configured by setting rlPethPsePortMenagementMode
1.3.6.1.4.1.9.6.1.101.108.1.1.22INTEGER (0..2147483647)read-onlycurrent
rlPethPsePortHighPowerOpStatus
OBJECT-TYPE
This variable identifies the poe port high power status
1.3.6.1.4.1.9.6.1.101.108.1.1.23INTEGER {not-relevant(0), enabled(1), disabled(2)}read-onlycurrent
rlPethMainPseTable
OBJECT-TYPE
The table listing additional read - only information for Power Over Ethernet.
1.3.6.1.4.1.9.6.1.101.108.2not-accessiblecurrent
rlPethMainPseEntry
OBJECT-TYPE
An entry in the rlPethMainPseTable.
1.3.6.1.4.1.9.6.1.101.108.2.1not-accessiblecurrent
rlPethMainPseGroupIndex
OBJECT-TYPE
This variable uniquely identifies the group containing the port to which a power Ethernet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for non-modular devices. Furthermore, the same value MUST be used in this variable, pethMainPseGroupIndex, and pethNotificationControlGroupIndex to refer to a given box in a stack or module in the rack.
1.3.6.1.4.1.9.6.1.101.108.2.1.1INTEGER (1..2147483647)not-accessiblecurrent
rlPethMainPseSwVersion
OBJECT-TYPE
This variable identifies the MCU SW version.
1.3.6.1.4.1.9.6.1.101.108.2.1.2DisplayString (SIZE(0..20))read-onlycurrent
rlPethMainPseHwVersion
OBJECT-TYPE
This variable identifies the MCU HW version.
1.3.6.1.4.1.9.6.1.101.108.2.1.3DisplayString (SIZE(0..20))read-onlyobsolete
rlPethMainPseHwType
OBJECT-TYPE
This variable identifies the MCU HW type (enhanced, plus, none).
1.3.6.1.4.1.9.6.1.101.108.2.1.4INTEGER {enhanced(1), plus(2), auto(3), nonPoe(4), enhancedPlus(5), poe60w(6), poeBT(7)}read-onlycurrent
rlPethMainPsePowerGuardBand
OBJECT-TYPE
This variable identifies the guard band in [W] for not connecting additional ports.
1.3.6.1.4.1.9.6.1.101.108.2.1.5INTEGER (0..254)read-writecurrent
rlPethMainPsePowerManagementMode
OBJECT-TYPE
This variable identifies power management mode.
1.3.6.1.4.1.9.6.1.101.108.2.1.6INTEGER {portlimit(0), classlimit(5), maxlimit(6)}read-writecurrent
rlPethMainPsedisconnectMethod
OBJECT-TYPE
This variable identifies disconnect method.
1.3.6.1.4.1.9.6.1.101.108.2.1.7INTEGER {lowestpriority(0), nextport(1)}read-writecurrent
rlPethMainPseTemperatureSensor
OBJECT-TYPE
This variable identifies the pd temperature sensor.
1.3.6.1.4.1.9.6.1.101.108.2.1.8INTEGER (-200..200)read-onlycurrent
rlPethMainPseInrushTestEnabled
OBJECT-TYPE
This variable identifies if HW inrush test will be disabled. by default HW inrush test is enabled.
1.3.6.1.4.1.9.6.1.101.108.2.1.9INTEGER {enabled(0), disabled(1)}read-writecurrent
rlPethMainPseLegacyDisabled
OBJECT-TYPE
This variable identifies poe Legacy global configuration mode
1.3.6.1.4.1.9.6.1.101.108.2.1.10INTEGER {enabled(0), disabled(1)}read-writecurrent
rlPethMainBanksValues
OBJECT-TYPE
This variable returns 16 power-banks of a specific switch
1.3.6.1.4.1.9.6.1.101.108.2.1.11OCTET STRINGread-onlycurrent
rlPethMainBanksActivePowerBank
OBJECT-TYPE
This variable returns the active power-bank of a specific switch
1.3.6.1.4.1.9.6.1.101.108.2.1.12INTEGERread-onlycurrent
rlPethPowerPseTable
OBJECT-TYPE
The table listing additional read-write information for Power Over Ethernet - PSE side.
1.3.6.1.4.1.9.6.1.101.108.3not-accessiblecurrent
rlPethPowerPseEntry
OBJECT-TYPE
An entry in the rlPethPowerPseTable.
1.3.6.1.4.1.9.6.1.101.108.3.1not-accessiblecurrent
rlPethPowerPseGroupIndex
OBJECT-TYPE
This variable uniquely identifies the group containing the port to which a power Ethernet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for non-modular devices. Furthermore, the same value MUST be used in this variable, PethPowerPseGroupIndex, and pethNotificationControlGroupIndex to refer to a given box in a stack or module in the rack.
1.3.6.1.4.1.9.6.1.101.108.3.1.1INTEGER (1..8)not-accessiblecurrent
rlPethPowerPsePower
OBJECT-TYPE
This variable identifies the maximum power in [W] supplied by PSE.
1.3.6.1.4.1.9.6.1.101.108.3.1.2INTEGER {none(0), ps1(1), ps2(2), ps3(3)}read-writecurrent
rlPethPowerPseRpsPower
OBJECT-TYPE
This variable identifies the maximum power in [W] supplied by PSE + RPS.
1.3.6.1.4.1.9.6.1.101.108.3.1.3INTEGER {none(0), rps1(1), rps2(2), rps3(3)}read-writecurrent
rlPethPowerPsePowerManagementMode
OBJECT-TYPE
This variable identifies power management mode.
1.3.6.1.4.1.9.6.1.101.108.3.1.4INTEGER {portlimit(0), classlimit(5), maxlimit(6)}read-writecurrent
rlPethPowerPsedisconnectMethod
OBJECT-TYPE
This variable identifies disconnect method.
1.3.6.1.4.1.9.6.1.101.108.3.1.5INTEGER {lowestpriority(0), nextport(1)}read-writecurrent
rlPethPowerPseTemperatureSensor
OBJECT-TYPE
This variable identifies the pd temperature sensor.
1.3.6.1.4.1.9.6.1.101.108.3.1.6INTEGER (-200..200)read-onlycurrent
rlPethPowerPseInrushTestEnabled
OBJECT-TYPE
This variable identifies if HW inrush test will be disabled. by default HW inrush test is enabled.
1.3.6.1.4.1.9.6.1.101.108.3.1.7INTEGER {enabled(0), disabled(1)}read-writecurrent
rlPethPowerPseLegacyDisabled
OBJECT-TYPE
This variable identifies poe Legacy global configuration mode
1.3.6.1.4.1.9.6.1.101.108.3.1.8INTEGER {enabled(0), disabled(1)}read-writecurrent
rlPethPowerBanksValues
OBJECT-TYPE
This variable returns 16 power-banks of a specific switch
1.3.6.1.4.1.9.6.1.101.108.3.1.9OCTET STRINGread-onlycurrent
rlPethPowerBanksActivePowerBank
OBJECT-TYPE
This variable returns the active power-bank of a specific switch
1.3.6.1.4.1.9.6.1.101.108.3.1.10INTEGERread-onlycurrent
rlPethPdPortTable
OBJECT-TYPE
The table listing additional read-write information for Power Over Ethernet - PD side.
1.3.6.1.4.1.9.6.1.101.108.4not-accessiblecurrent
rlPethPdPortEntry
OBJECT-TYPE
An entry in the rlPethPdPortTable.
1.3.6.1.4.1.9.6.1.101.108.4.1not-accessiblecurrent
rlPethPdPortIndex
OBJECT-TYPE
This variable uniquely identifies the power Ethernet PD port within group rlPethPdPortGroupIndex to which the power Ethernet PSE entry is connected.
1.3.6.1.4.1.9.6.1.101.108.4.1.1InterfaceIndexnot-accessiblecurrent
rlPethPdPortSupportPoeType
OBJECT-TYPE
This variable indicates the PoE type of the PD port (AF/AT/60W)
1.3.6.1.4.1.9.6.1.101.108.4.1.2RlPoeTyperead-onlycurrent
rlPethPdPortOperPoeType
OBJECT-TYPE
This variable indicates the operational PoE status of the PD port
1.3.6.1.4.1.9.6.1.101.108.4.1.3RlPoeTyperead-onlycurrent
rlPethPdPortPowerRequest
OBJECT-TYPE
This variable indicates the requested power the PD port request from the PSE in mili-Watts
1.3.6.1.4.1.9.6.1.101.108.4.1.4Unsigned32read-onlycurrent
rlPethPdPortPowerAvailable
OBJECT-TYPE
This variable indicates the available power the PSE port offers to the PD port in mili-Watts
1.3.6.1.4.1.9.6.1.101.108.4.1.5Unsigned32read-onlycurrent
rlPethPdPortForcedMode
OBJECT-TYPE
This variable indicates the powered PD port forced mode
1.3.6.1.4.1.9.6.1.101.108.4.1.6RlPoeTyperead-writecurrent
rlPethPdPortNegotiationProtocolOwner
OBJECT-TYPE
This variable indicates the protocol owner on power management negotiation protocol
1.3.6.1.4.1.9.6.1.101.108.4.1.7INTEGER {protocolOwnerNone(0), protocolOwnerCDP(1), protocolOwnerLLDP(2), protocolOwnerCDPExpired(3), protocolOwnerLLDPExpired(4)}read-onlycurrent
rlPethPseUnitTable
OBJECT-TYPE
The table listing additional read-write information for Power Over Ethernet unit capabilities.
1.3.6.1.4.1.9.6.1.101.108.5not-accessiblecurrent
rlPethPseUnitEntry
OBJECT-TYPE
An entry in the rlPethPseUnitTable.
1.3.6.1.4.1.9.6.1.101.108.5.1not-accessiblecurrent
rlPethUnitIndex
OBJECT-TYPE
This variable uniquely identifies the unit id. It means box in the stack, module in a rack and the value 1 MUST be used for non-modular devices. Furthermore, the same value MUST be used in this variable, PethPowerPseGroupIndex, and pethNotificationControlGroupIndex to refer to a given box in a stack or module in the rack.
1.3.6.1.4.1.9.6.1.101.108.5.1.1INTEGER (1..8)not-accessiblecurrent
rlPethUnitType
OBJECT-TYPE
This variable identifies the unit type (PSE/PD/Both/None).
1.3.6.1.4.1.9.6.1.101.108.5.1.2INTEGER {unitTypeNone(0), unitTypePSE(1), unitTypePD(2), unitTypePSEPD(3)}read-onlycurrent
rlPethUnitColor
OBJECT-TYPE
This variable identifies the unit PSE status (color can be green,yellow,red).
1.3.6.1.4.1.9.6.1.101.108.5.1.3INTEGER {unitColorNone(0), unitColorGreen(1), unitColorYellow(2), unitColorRed(3)}read-onlycurrent
rlPethPseCountersClear
OBJECT-TYPE
Clear poe port counter. By setting the MIB to 0x0FFFFFFF, all poe ports counters are set to zero. by Setting to port index, all specific poe port counters are set to zero
1.3.6.1.4.1.9.6.1.101.108.6InterfaceIndexOrZeroread-writecurrent
rlPoeClassErrorDetectionStatus
OBJECT-TYPE
Specifies if class detection error is enabled (true) or disabled (false)
1.3.6.1.4.1.9.6.1.101.108.8TruthValueread-writecurrent
rlPethPerPseTable
OBJECT-TYPE
The table listing additional information for Power Over Ethernet ports per PSE device.
1.3.6.1.4.1.9.6.1.101.108.9not-accessiblecurrent
rlPethPerPseEntry
OBJECT-TYPE
An entry in the rlPethPerPseTable.
1.3.6.1.4.1.9.6.1.101.108.9.1not-accessiblecurrent
rlPethPerPseGroupIndex
OBJECT-TYPE
This variable uniquely identifies the group containing the port to which a power Ethernet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for non-modular devices.
1.3.6.1.4.1.9.6.1.101.108.9.1.1INTEGER (1..8)not-accessiblecurrent
rlPethPerPseDeviceIndex
OBJECT-TYPE
This variable uniquely identifies the PSE device within the group.
1.3.6.1.4.1.9.6.1.101.108.9.1.2INTEGER (0..7)not-accessiblecurrent
rlPethPerPseTemperatureValue
OBJECT-TYPE
This variable represents temperature reported from PSE device.
1.3.6.1.4.1.9.6.1.101.108.9.1.3INTEGER (-200..200)read-onlycurrent
rlPethPerPseHwRevision
OBJECT-TYPE
This variable identifies the MCU HW version.
1.3.6.1.4.1.9.6.1.101.108.9.1.4DisplayString (SIZE(0..20))read-onlycurrent
rlPethPerPseVopStatus
OBJECT-TYPE
Specifies status of VoP problem in PoE device
1.3.6.1.4.1.9.6.1.101.108.9.1.5INTEGER {deviceOk(0), detectionError(1), classificationError(2), legacyError(3), undefinedState(4)}read-onlycurrent
rlPethPsePortReactivate
OBJECT-TYPE
Action MIB scalar. In case the ports in the port-list are disabled due to PoE HW error, the PoE mechanism will try to re-activate them.
1.3.6.1.4.1.9.6.1.101.108.10PortListread-writecurrent