CISCOSB-LBD-MIB
- Registered at
- 1.3.6.1.4.1.9.6.1.101.127
- Last updated
- 2007-11-07 00:00
- Organization
- Cisco Systems, Inc.
- Revisions
- 2007-11-07 00:00
- Namespace
- cisco
- Source file
CISCOSB-LBD-MIB- Digest
sha256:ebbc5ab8e191ccb9cbc87776162c6bbb6497733edbaacf026a1d77ba6bd43cc0
Description
The private MIB module definition for Loopback Detection MIB.
Contact
Postal: 170 West Tasman Drive San Jose , CA 95134-1706 USA Website: Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>
Imports
| From | Symbols |
|---|---|
| CISCOSB-MIB | switch001 |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCOSB-LBD-MIB CISCOSB-MIB IANAifType-MIB IF-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| rlLbdEnable OBJECT-TYPE Enable/Disable Loopback Detection in the switch. | 1.3.6.1.4.1.9.6.1.101.127.1 | TruthValue | read-write | current |
| rlLbdDetectionInterval OBJECT-TYPE The time in seconds that should pass between unicast LBD packets. | 1.3.6.1.4.1.9.6.1.101.127.2 | INTEGER (5..60) | read-write | current |
| rlLbdMode OBJECT-TYPE Loopback detection mode. | 1.3.6.1.4.1.9.6.1.101.127.3 | INTEGER {source-mac-addr(1), base-mac-addr(2), broadcast-mac-addr(3), predefined-multicast-mac-addr(4), user-defined-mac-addr(5)} | read-write | current |
| rlLbdPortTable OBJECT-TYPE The table contains Admin configuration and operational status per port. | 1.3.6.1.4.1.9.6.1.101.127.4 | not-accessible | current | |
| rlLbdPortEntry OBJECT-TYPE Each entry represent a port. Per port contains LBD Admin configuration (SET) and status (GET), LBD Operational status and LBD Vlan configuration (SET) and status (GET). | 1.3.6.1.4.1.9.6.1.101.127.4.1 | not-accessible | current | |
| rlLbdPortAdminStatus OBJECT-TYPE Enable/Disable Loopback Detection on port | 1.3.6.1.4.1.9.6.1.101.127.4.1.1 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| rlLbdPortOperStatus OBJECT-TYPE Indicates Loopback Detection operational status on port. 'inactive' means that the port is not working in loop-detected operational state; 'active' means that the port is Up and working in state of loop-detecting; 'loop-detected' means that the system has detected loop on the port. | 1.3.6.1.4.1.9.6.1.101.127.4.1.2 | INTEGER {inactive(1), active(2), loopDetected(3)} | read-only | current |