MIBs Depot

CISCOSB-IP-SLA

Registered at
1.3.6.1.4.1.9.6.1.101.231
Last updated
2011-01-05 00:00
Organization
Cisco Systems, Inc.
Revisions
2016-02-28 00:00
Namespace
cisco
Source file
CISCOSB-IP-SLA
Digest
sha256:5e3da24863c2a2dc100cbbab1448a7d9171f7d2b1a95ca13341cf49d86f5d811

Description

This private MIB module is used for definition of Service Level Agreements

Contact

Postal: 170 West Tasman Drive San Jose , CA 95134-1706 USA Website: Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>

Imports

FromSymbols
CISCOSB-MIBswitch001
INET-ADDRESS-MIBInetAddress, InetAddressType
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIIpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

CISCOSB-IP-SLA
CISCOSB-MIB
INET-ADDRESS-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
rlSLAOperTable
OBJECT-TYPE
This table contains configured ip SLA operations
1.3.6.1.4.1.9.6.1.101.231.1not-accessiblecurrent
rlSLAOperEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.9.6.1.101.231.1.1not-accessiblecurrent
rlSLAOperId
OBJECT-TYPE
IP SLA operation index
1.3.6.1.4.1.9.6.1.101.231.1.1.1Unsigned32not-accessiblecurrent
rlSLAOperType
OBJECT-TYPE
The IP SLA operation type.
1.3.6.1.4.1.9.6.1.101.231.1.1.2INTEGER {icmp-echo(1)}read-writecurrent
rlSLAOperState
OBJECT-TYPE
The IP SLA operation state.
1.3.6.1.4.1.9.6.1.101.231.1.1.3INTEGER {pending(0), scheduled(1)}read-writecurrent
rlSLAOperTimeout
OBJECT-TYPE
The time in milliseconds an IP SLA operation waits for a response.
1.3.6.1.4.1.9.6.1.101.231.1.1.4Unsigned32read-writecurrent
rlSLAOperFrequency
OBJECT-TYPE
The rate (in seconds) at which a specified operation repeats.
1.3.6.1.4.1.9.6.1.101.231.1.1.5Unsigned32read-writecurrent
rlSLAOperReqDataSize
OBJECT-TYPE
The payload size of the request packet of the IP SLA operation.
1.3.6.1.4.1.9.6.1.101.231.1.1.6Unsigned32 (28..1472)read-writecurrent
rlSLAOperReturnCode
OBJECT-TYPE
The IP SLA operation return code.
1.3.6.1.4.1.9.6.1.101.231.1.1.7INTEGER {success(0), error(1)}read-onlycurrent
rlSLAOperDestAddrType
OBJECT-TYPE
The inet type of destination address
1.3.6.1.4.1.9.6.1.101.231.1.1.8InetAddressTyperead-writecurrent
rlSLAOperDestAddr
OBJECT-TYPE
The destination address of operation (i.e. icmp-echo)
1.3.6.1.4.1.9.6.1.101.231.1.1.9InetAddressread-writecurrent
rlSLAOperSrcAddr
OBJECT-TYPE
The source ip address of operation
1.3.6.1.4.1.9.6.1.101.231.1.1.10IpAddressread-writecurrent
rlSLAOperSuccessCounter
OBJECT-TYPE
The IP SLA operation success counter.
1.3.6.1.4.1.9.6.1.101.231.1.1.11Unsigned32read-onlycurrent
rlSLAOperFailureCounter
OBJECT-TYPE
The IP SLA operation failure counter.
1.3.6.1.4.1.9.6.1.101.231.1.1.12Unsigned32read-onlycurrent
rlSLAICMPEchoRequestCounter
OBJECT-TYPE
The IP SLA operation ICMP-echo request counter.
1.3.6.1.4.1.9.6.1.101.231.1.1.13Unsigned32read-onlycurrent
rlSLAICMPEchoReplyCounter
OBJECT-TYPE
The IP SLA operation ICMP-echo reply counter.
1.3.6.1.4.1.9.6.1.101.231.1.1.14Unsigned32read-onlycurrent
rlSLAICMPErrorCounter
OBJECT-TYPE
The IP SLA operation ICMP-echo error counter.
1.3.6.1.4.1.9.6.1.101.231.1.1.15Unsigned32read-onlycurrent
rlSLARowStatus
OBJECT-TYPE
This variable displays the validity or invalidity of the entry. Setting it to 'destroy' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
1.3.6.1.4.1.9.6.1.101.231.1.1.16RowStatusread-createcurrent
rlSLAOperNextHopAddr
OBJECT-TYPE
The next hop ip address
1.3.6.1.4.1.9.6.1.101.231.1.1.17IpAddressread-writecurrent
rlSLAICMPEchoHostUnreachCounter
OBJECT-TYPE
The ICMP-echo host unreachable counter.
1.3.6.1.4.1.9.6.1.101.231.1.1.18Unsigned32read-onlycurrent
rlSLAICMPEchoNonHostUnreachCounter
OBJECT-TYPE
The ICMP-echo non host unreachable error counter.
1.3.6.1.4.1.9.6.1.101.231.1.1.19Unsigned32read-onlycurrent
rlSLATrackTable
OBJECT-TYPE
Table of ip SLA operations track objects
1.3.6.1.4.1.9.6.1.101.231.2not-accessiblecurrent
rlSLATrackEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.9.6.1.101.231.2.1not-accessiblecurrent
rlSLATrackObj
OBJECT-TYPE
IP SLA track object identifier
1.3.6.1.4.1.9.6.1.101.231.2.1.1Unsigned32not-accessiblecurrent
rlSLATrackOperId
OBJECT-TYPE
IP SLA operation index
1.3.6.1.4.1.9.6.1.101.231.2.1.2Unsigned32read-writecurrent
rlSLAUpDelay
OBJECT-TYPE
Delay time moving from down state to up state
1.3.6.1.4.1.9.6.1.101.231.2.1.3Unsigned32read-writecurrent
rlSLADownDelay
OBJECT-TYPE
Delay time moving from up state to down state
1.3.6.1.4.1.9.6.1.101.231.2.1.4Unsigned32read-writecurrent
rlSLADelayReminder
OBJECT-TYPE
Delay time moving from up state to down state
1.3.6.1.4.1.9.6.1.101.231.2.1.5Unsigned32read-onlycurrent
rlSLATrackObjState
OBJECT-TYPE
The track object current state (Up or Down, default is: Up).
1.3.6.1.4.1.9.6.1.101.231.2.1.6INTEGER {up(0), down(1)}read-onlycurrent
rlSLATrackRowStatus
OBJECT-TYPE
This variable displays the validity or invalidity of the entry. Setting it to 'destroy' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
1.3.6.1.4.1.9.6.1.101.231.2.1.7RowStatusread-createcurrent
rlSLAClearCounters
OBJECT-TYPE
Clear SLA counters. Setting a value of zero clears counters of all operations. Setting a non-zero value clears the specific operation counters.
1.3.6.1.4.1.9.6.1.101.231.3INTEGER (-1..64)read-writecurrent