CISCOSB-BRGMACSWITCH-MIB
- Registered at
- 1.3.6.1.4.1.9.6.1.101.50
- Last updated
- 2007-01-02 00:00
- Organization
- Cisco Systems, Inc.
- Revisions
- 2007-01-02 00:00
- Namespace
- cisco
- Source file
CISCOSB-BRGMACSWITCH-MIB- Digest
sha256:870d4bf9fef95e12343b042781e1c4e7664de1811d83aedde7050bb758bd2172
Description
This private MIB module defines Switching Parameters private MIBs.
Contact
Postal: 170 West Tasman Drive San Jose , CA 95134-1706 USA Website: Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>
Imports
| From | Symbols |
|---|---|
| CISCOSB-MIB | switch001 |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCOSB-BRGMACSWITCH-MIB CISCOSB-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| rlBrgMacSwVersion OBJECT-TYPE MIB's version, the current version is 2. | 1.3.6.1.4.1.9.6.1.101.50.1 | INTEGER | read-only | current |
| rlBrgMacSwMaxTableNumber OBJECT-TYPE Maximum number of MAC Tables supported by the device. | 1.3.6.1.4.1.9.6.1.101.50.2 | INTEGER | read-only | current |
| rlBrgMacSwDynamicTables OBJECT-TYPE Specifies whether the device supports port dynamic MAC tables. | 1.3.6.1.4.1.9.6.1.101.50.3 | INTEGER {supported(1), unsupported(2)} | read-only | current |
| rlBrgMacSwOldEntryDeleteMode OBJECT-TYPE The method used to delete old unused entries refresh_flag: The high level sets a flag when it adds or updates an entry, the Switch clears the flag each time, when it learns the station once more. aging_flag: The high level clears a flag when it adds or updates an entry, the Switch sets the flag each time, when it learns the station once more. aging_time: The high level defines a timeout, the Switch sends a message to the high level each time when the station doesn't send messages during interval between timeout and 2*timeout. Boundaries: The Switch doesn't support any mechanism, and the high level uses two boundaries: red and yellow. When the number of entries exceeds the red boundary, the high level deletes the oldest entries. | 1.3.6.1.4.1.9.6.1.101.50.5 | INTEGER {refreshFlag(1), agingFlag(2), agingTime(3), boundaries(4)} | read-only | current |
| rlBrgMacSwSpanningTree OBJECT-TYPE Specifies whether the device supports port the Spanning Tree Protocol. | 1.3.6.1.4.1.9.6.1.101.50.6 | INTEGER {supported(1), unsupported(2)} | read-only | current |
| rlBrgMacSwKeyType OBJECT-TYPE Specified the used MAC Address Table kye format: macOnly: One global MAC Address Table per device (leaky VLANs). tagAndMac: MAC Address Table per each VLAN (strick VLANs). | 1.3.6.1.4.1.9.6.1.101.50.7 | INTEGER {macOnly(1), tagAndMac(2)} | read-only | current |
| rlBrgMacSwYellowBoundary OBJECT-TYPE The yellow boundary. | 1.3.6.1.4.1.9.6.1.101.50.8 | INTEGER | read-write | current |
| rlBrgMacSwRedBoundary OBJECT-TYPE The yellow boundary. | 1.3.6.1.4.1.9.6.1.101.50.9 | INTEGER | read-write | current |
| rlBrgMacSwTrapEnable OBJECT-TYPE This variable indicates whether to create a SNMP trap if adding dynamic mac failed due to full hash chain. | 1.3.6.1.4.1.9.6.1.101.50.10 | TruthValue | read-write | current |
| rlBrgMacSwOperTrapCount OBJECT-TYPE This variable indicates the trap counter status (i.e. number of received MAC addresses since the last trap sent that haven't been inserted into the hash). It is relevant only when trap is enabled. | 1.3.6.1.4.1.9.6.1.101.50.11 | INTEGER | read-only | current |
| rlBrgMacSwAdminTrapFrequency OBJECT-TYPE This variable indicates the minimal frequency (in seconds) of sending a trap. It is relevant only when trap is enabled. | 1.3.6.1.4.1.9.6.1.101.50.12 | INTEGER (1..86400) | read-write | current |