MIBs Depot

CISCOSB-BONJOUR-MIB

Registered at
1.3.6.1.4.1.9.6.1.101.114
Last updated
2009-09-21 00:00
Organization
Cisco Systems, Inc.
Revisions
2009-04-23 00:00
Namespace
cisco
Source file
CISCOSB-BONJOUR-MIB
Digest
sha256:f5c113888c312a937b0e26ae496476d7125ffce66b62f571b5fb9f1ee22ddb23

Description

The private MIB module definition for Bonjour protocol.

Contact

Postal: 170 West Tasman Drive San Jose , CA 95134-1706 USA Website: Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>

Imports

FromSymbols
CISCOSB-MIBswitch001
IF-MIBInterfaceIndex
INET-ADDRESS-MIBInetAddress, InetAddressType
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIMODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

CISCOSB-BONJOUR-MIB
CISCOSB-MIB
IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
RlBonjourOperationReason
TEXTUAL-CONVENTION
Bonjour service an L2 interface operation state.
current
RlBonjourOperationState
TEXTUAL-CONVENTION
Bonjour service an L2 interface operation state.
current
RlBonjourServiceState
TEXTUAL-CONVENTION
Bonjour service status - (per IP interface).
current

Objects

NameOIDSyntaxAccessStatus
rlBonjourPublish
OBJECT-TYPE
Enables or disables Bonjour publishing.
1.3.6.1.4.1.9.6.1.101.114.1INTEGER {enable(1), disable(2)}read-writecurrent
rlBonjourStatusTable
OBJECT-TYPE
The table listing the service bonjour status per service and IP interface. In order to keep the table sorted according to the customary lexicographical order of the rlBonjourStatusServiceName strings, rlBonjourStatusServiceName will be padded with blanks. Bonjour will truncate the padded blanks when advertising this service name. Using this MIB user can monitor actual state of a service on an IP interface
1.3.6.1.4.1.9.6.1.101.114.2not-accessiblecurrent
rlBonjourStatusEntry
OBJECT-TYPE
An entry in the rlBonjourStatusEntry.
1.3.6.1.4.1.9.6.1.101.114.2.1not-accessiblecurrent
rlBonjourStatusServiceName
OBJECT-TYPE
This variable identifies the service name.
1.3.6.1.4.1.9.6.1.101.114.2.1.1DisplayStringnot-accessiblecurrent
rlBonjourStatusIPInterfaceType
OBJECT-TYPE
This variable indicates the type of the IP interface on which the Bonjour service should be published.
1.3.6.1.4.1.9.6.1.101.114.2.1.2InetAddressTypenot-accessiblecurrent
rlBonjourStatusIPInterfaceAddr
OBJECT-TYPE
This variable indicates the address of the IP interface on which the Bonjour service should be published.
1.3.6.1.4.1.9.6.1.101.114.2.1.3InetAddressnot-accessiblecurrent
rlBonjourStatusState
OBJECT-TYPE
This variable identifies the service state on IP interface of the device.
1.3.6.1.4.1.9.6.1.101.114.2.1.4RlBonjourServiceStateread-onlycurrent
rlBonjourStateTable
OBJECT-TYPE
The table listing the service bonjour state per service and L2 interface. The services that are displayed here are only those who are supported per project. The L2 interfaces that are displayed here are either: L2 interfaces with an IP on it OR L2 interfaces listed in the table below Per each pair (service and L2 interface) table displays: state : UP - Bonjour published the service on this L2 interface Not-exclude - the L2 interface has IP address (L2 interface is in UP state) AND rlBonjourL2Table is empty AND rlBonjourL2Mode is disable include - the L2 interfaces are listed in the table rlBonjourL2Table AND rlBonjourL2Mode is enabled Down - Bonjour sent goodbye packets regarding this service on this L2 interface exclude - the L2 interface is a member of the rlBonjourL2Table AND rlBonjourL2Mode is disable Not-Include - rlBonjourL2Table is empty AND rlBonjourL2Mode is enable service disabled - service was removed due to specific request from L1 manager No IP address - the L2 interfaces is listed in the table rlBonjourL2EnableTable BUT don't have an IP on it Not-present - the L2 interfaces is listed in the table rlBonjourL2EnableTable BUT not yet defined (like vlan not created or port in an unconnected member) Bonjour disabled - rlBonjourPublish scalar is off Using this MIB user can monitor actual state of a service on an L2 interface
1.3.6.1.4.1.9.6.1.101.114.3not-accessiblecurrent
rlBonjourStateEntry
OBJECT-TYPE
An entry in the rlBonjourStatusEntry.
1.3.6.1.4.1.9.6.1.101.114.3.1not-accessiblecurrent
rlBonjourStateServiceName
OBJECT-TYPE
This variable identifies the service name.
1.3.6.1.4.1.9.6.1.101.114.3.1.1DisplayStringnot-accessiblecurrent
rlBonjourStateL2Interface
OBJECT-TYPE
This variable indicates the L2 interface on which the Bonjour service should be published.
1.3.6.1.4.1.9.6.1.101.114.3.1.2InterfaceIndexnot-accessiblecurrent
rlBonjourStateOperationMode
OBJECT-TYPE
This variable indicates whether Bonjour over IPv4 is operational on the pair (service + L2 interface).
1.3.6.1.4.1.9.6.1.101.114.3.1.3RlBonjourOperationStateread-onlycurrent
rlBonjourStateOperationReason
OBJECT-TYPE
This variable specifies the reason for the value of rlBonjourStateOperationMode.
1.3.6.1.4.1.9.6.1.101.114.3.1.4RlBonjourOperationReasonread-onlycurrent
rlBonjourStateIPv6OperationMode
OBJECT-TYPE
This variable indicates whether Bonjour over IPv4 is operational on the pair (service + L2 interface).
1.3.6.1.4.1.9.6.1.101.114.3.1.5RlBonjourOperationStateread-onlycurrent
rlBonjourStateIPv6OperationReason
OBJECT-TYPE
This variable specifies the reason for the value of rlBonjourStateIPv6OperationMode
1.3.6.1.4.1.9.6.1.101.114.3.1.6RlBonjourOperationReasonread-onlycurrent
rlBonjourL2Table
OBJECT-TYPE
The table listing the L2 interfaces on which the user wishes to enable OR disable Bonjour with respect to rlBonjourL2Mode. If rlBonjourL2Mode is set to include AND L2 interface is in this table it does not ensure Bonjour WILL publish services on it. Publication is also dependent on these fundemental conditions: rlBonjourPublish must be on at least one service should be enabled L2 must be present and UP have at least one IP on it If this table is empty AND rlBonjourL2Mode is set to include Bonjour won't operate at all. If rlBonjourL2Mode is set to exclude, and rlBonjourL2Table is empty Bonjour will be published on ALL L2 interfaces answering to the fundemental conditions specified above. If rlBonjourL2Table is NOT empty then Bonjour will operate on ALL L2 interfaces answering to the fundemental conditions specified above BUT NOT members of this list.
1.3.6.1.4.1.9.6.1.101.114.4not-accessiblecurrent
rlBonjourL2Entry
OBJECT-TYPE
An entry in the rlBonjourL2Entry.
1.3.6.1.4.1.9.6.1.101.114.4.1not-accessiblecurrent
rlBonjourL2Ifindex
OBJECT-TYPE
This variable identifies the L2 interface.
1.3.6.1.4.1.9.6.1.101.114.4.1.1InterfaceIndexnot-accessiblecurrent
rlBonjourL2RowStatus
OBJECT-TYPE
This variable identifies the L2 interface status manager.
1.3.6.1.4.1.9.6.1.101.114.4.1.2RowStatusread-writecurrent
rlBonjourL2Mode
OBJECT-TYPE
specify whether the L2 interfaces listed in rlBonjourL2Table means include bonjour on these L2 interfaces once they: rlBonjourPublish must be on at least one service should be enabled L2 must be present and UP have at least one IP on it OR exclude bonjour on these L2 interfaces even if they answer to all the conditions above.
1.3.6.1.4.1.9.6.1.101.114.5INTEGER {include(1), exclude(2)}read-writecurrent
rlBonjourInstanceName
OBJECT-TYPE
Instance Name is given to Bonjour driver by the project part (L1Manager) When a conflict occurs: found another station with the same instance name. Bonjour driver is required to append _m to the given name while m is an incremental integer, increasing on each conflict
1.3.6.1.4.1.9.6.1.101.114.6INTEGERread-onlycurrent
rlBonjourHostName
OBJECT-TYPE
Host Name is given to Bonjour driver by the project part (L1Manager) When a conflict occurs: found another station with the same host name. Bonjour driver is required to append _m to the given name while m is an incremental integer, increasing on each conflict
1.3.6.1.4.1.9.6.1.101.114.7INTEGERread-onlycurrent