CISCO-WIRELESS-P2P-BPI-MIB
- Registered at
- 1.3.6.1.4.1.9.9.135
- Last updated
- 1999-05-18 12:00
- Organization
- Cisco Systems Inc.
- Namespace
- cisco
- Source file
CISCO-WIRELESS-P2P-BPI-MIB- Digest
sha256:3a8ccfbf3853245deeb9939c1b8cf24dc6bdf46e696d9941182ddc01ebfd7710
Description
This is the MIB Module for the Baseline Privacy Interface (BPI) at Point to Point Wireless Radio Card. This is a specialization on the MCNS docsBpiMib for Cisco Wireless point to point communication links.
Contact
Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-wireless@cisco.com
Imports
| From | Symbols |
|---|---|
| CISCO-SMI | ciscoMgmt |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION, TimeInterval, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCO-SMI CISCO-WIRELESS-P2P-BPI-MIB IANAifType-MIB IF-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| cwrBpiMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.135.1 | |||
| cwrBpiRsObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.135.1.1 | |||
| cwrBpiRsBaseTable OBJECT-TYPE Describes the basic and authorization-related Baseline Privacy attributes of each Slave Radio interface. | 1.3.6.1.4.1.9.9.135.1.1.1 | not-accessible | current | |
| cwrBpiRsBaseEntry OBJECT-TYPE An entry containing objects describing attributes of one Slave Radio interface. An entry in this table exists for each ifEntry with an ifType of ciscoWirelessP2P. | 1.3.6.1.4.1.9.9.135.1.1.1.1 | not-accessible | current | |
| cwrBpiRsPrivacyEnable OBJECT-TYPE This object identifies whether the Slave Radio is provisioned to use Encryption or not. | 1.3.6.1.4.1.9.9.135.1.1.1.1.1 | TruthValue | read-write | current |
| cwrBpiRsPublicKey OBJECT-TYPE Public key of the Radio Slave encoded as an ASN.1 SubjectPublicKeyInfo object as defined in the RSA Encryption Standard (PKCS #1) [RSA1]. | 1.3.6.1.4.1.9.9.135.1.1.1.1.2 | OCTET STRING (SIZE(0..126)) | read-only | current |
| cwrBpiRsAuthState OBJECT-TYPE The state of the Radio Slave authorization FSM. The start state indicates that FSM is in its initial state. | 1.3.6.1.4.1.9.9.135.1.1.1.1.3 | INTEGER {start(1), authWait(2), authorized(3), reauthWait(4), authRejectWait(5)} | read-only | current |
| cwrBpiRsAuthKeySequenceNumber OBJECT-TYPE The authorization key sequence number for this FSM. | 1.3.6.1.4.1.9.9.135.1.1.1.1.4 | INTEGER (0..15) | read-only | current |
| cwrBpiRsAuthExpires OBJECT-TYPE The number of seconds left before the current authorization for this FSM expires. If the Radio Slave does not have an active authorization, then this value is 0. | 1.3.6.1.4.1.9.9.135.1.1.1.1.5 | TimeInterval | read-only | current |
| cwrBpiRsAuthReset OBJECT-TYPE Setting this object to TRUE generates a Reauthorize event in the authorization FSM, as described in section 4.1.2.3.4 of the Baseline Privacy Interface Specification. Reading this object always returns FALSE. | 1.3.6.1.4.1.9.9.135.1.1.1.1.6 | TruthValue | read-write | current |
| cwrBpiRsAuthGraceTime OBJECT-TYPE Grace time for an authorization key. A Radio Slave is expected to start trying to get a new authorization key beginning AuthGraceTime seconds before the authorization key actually expires. The value of this object cannot be changed while the authorization state machine is running. NOTE: When installed in the field, this variable should NEVER be set below 300 which is the lower limit by standard. This variable accepts a wider range to facilitate testing. | 1.3.6.1.4.1.9.9.135.1.1.1.1.7 | INTEGER (1..1800) | read-write | current |
| cwrBpiRsTEKGraceTime OBJECT-TYPE Grace time for a TEK. A Radio Slave is expected to start trying to get a new TEK beginning TEKGraceTime seconds before the TEK actually expires. The value of this object cannot be changed while the authorization state machine is running. NOTE: When installed in the field, this variable should NEVER be set below 300 which is the lower limit by standard. This variable accepts a wider range to facilitate testing. | 1.3.6.1.4.1.9.9.135.1.1.1.1.8 | INTEGER (1..1800) | read-write | current |
| cwrBpiRsAuthWaitTimeout OBJECT-TYPE Authorize Wait Timeout. The value of this object cannot be changed while the authorization state machine is running. | 1.3.6.1.4.1.9.9.135.1.1.1.1.9 | INTEGER (2..30) | read-write | current |
| cwrBpiRsReauthWaitTimeout OBJECT-TYPE Reauthorize Wait Timeout in seconds. The value of this object cannot be changed while the authorization state machine is running. | 1.3.6.1.4.1.9.9.135.1.1.1.1.10 | INTEGER (2..30) | read-write | current |
| cwrBpiRsOpWaitTimeout OBJECT-TYPE Operational Wait Timeout in seconds. The value of this object cannot be changed while the authorization state machine is running. | 1.3.6.1.4.1.9.9.135.1.1.1.1.11 | INTEGER (1..10) | read-write | current |
| cwrBpiRsRekeyWaitTimeout OBJECT-TYPE Rekey Wait Timeout in seconds. The value of this object cannot be changed while the authorization state machine is running. | 1.3.6.1.4.1.9.9.135.1.1.1.1.12 | INTEGER (1..10) | read-write | current |
| cwrBpiRsAuthRequests OBJECT-TYPE Count of times the Radio Slave has transmitted an Authorization Request message. | 1.3.6.1.4.1.9.9.135.1.1.1.1.13 | Counter32 | read-only | current |
| cwrBpiRsAuthReplies OBJECT-TYPE Count of times the Radio Slave has received an Authorization Reply message. | 1.3.6.1.4.1.9.9.135.1.1.1.1.14 | Counter32 | read-only | current |
| cwrBpiRsAuthInvalids OBJECT-TYPE Count of times the Radio Slave has received an Authorization Invalid message. | 1.3.6.1.4.1.9.9.135.1.1.1.1.15 | Counter32 | read-only | current |
| cwrBpiRsAuthInvalidErrorCode OBJECT-TYPE Error-Code in most recent Authorization Invalid message received by the Radio Slave. On bootup, this has value no-information(0). At all other times, this object reflects the error code received | 1.3.6.1.4.1.9.9.135.1.1.1.1.16 | INTEGER {noInformation(0), unauthorizedSlave(1), undefined(2), unsolicited(3), invalidKeySequence(4), keyRequestAuthenticationFailure(5)} | read-only | current |
| cwrBpiRsAuthInvalidErrorString OBJECT-TYPE Display-String in most recent Authorization Invalid message received by the Radio Slave. This is a zero length string if no Authorization Invalid message has been received since reboot. | 1.3.6.1.4.1.9.9.135.1.1.1.1.17 | DisplayString | read-only | current |
| cwrBpiRsTEKTable OBJECT-TYPE Describes the attributes of each Radio Slave Traffic Encryption Key (TEK) Service. | 1.3.6.1.4.1.9.9.135.1.1.2 | not-accessible | current | |
| cwrBpiRsTEKEntry OBJECT-TYPE An entry containing objects describing the TEK attributes of one instantiated TEK service. There will be one such entry for every Radio Slave of a P2P link. | 1.3.6.1.4.1.9.9.135.1.1.2.1 | not-accessible | current | |
| cwrBpiRsTEKEncryptionNegotiated OBJECT-TYPE This identifies whether this TEK service is using encryption or not. Encryption may not be in use even though cwrBpiRsPrivacyEnable is provisioned. This is possible if the remote is not configured for privacy or it's not running an encryption capable image. | 1.3.6.1.4.1.9.9.135.1.1.2.1.1 | TruthValue | read-only | current |
| cwrBpiRsTEKState OBJECT-TYPE The state of the indicated TEK FSM. The start(1) state indicates that FSM is in its initial state. | 1.3.6.1.4.1.9.9.135.1.1.2.1.2 | INTEGER {start(1), opWait(2), opReauthWait(3), operational(4), rekeyWait(5), rekeyReauthWait(6)} | read-only | current |
| cwrBpiRsTEKExpiresOld OBJECT-TYPE The number of seconds left to expire for the oldest active key for this FSM. If this FSM has no active keys then this value will be zero. | 1.3.6.1.4.1.9.9.135.1.1.2.1.3 | TimeInterval | read-only | current |
| cwrBpiRsTEKExpiresNew OBJECT-TYPE The number of seconds left to expire for the newest active key for this FSM. If this FSM has no active keys then this value will be zero. | 1.3.6.1.4.1.9.9.135.1.1.2.1.4 | TimeInterval | read-only | current |
| cwrBpiRsTEKKeyRequests OBJECT-TYPE Count of times the this TEK Service has transmitted a Key Request message. | 1.3.6.1.4.1.9.9.135.1.1.2.1.5 | Counter32 | read-only | current |
| cwrBpiRsTEKKeyReplies OBJECT-TYPE Count of times this TEK Service has received a Key Reply message. | 1.3.6.1.4.1.9.9.135.1.1.2.1.6 | Counter32 | read-only | current |
| cwrBpiRsTEKInvalids OBJECT-TYPE Count of times this TEK Service has received a TEK Invalid message. | 1.3.6.1.4.1.9.9.135.1.1.2.1.7 | Counter32 | read-only | current |
| cwrBpiRsTEKAuthPends OBJECT-TYPE Count of times an Authorization Pending (Auth Pend) event occurred in this TEK Serivce FSM. | 1.3.6.1.4.1.9.9.135.1.1.2.1.8 | Counter32 | read-only | current |
| cwrBpiRsTEKInvalidErrorCode OBJECT-TYPE Error-Code in most recent TEK Invalid message received by this TEK service. On bootup, this has value no-information(0). At all other times, this object reflects the error code received | 1.3.6.1.4.1.9.9.135.1.1.2.1.9 | INTEGER {noInformation(0), unauthorizedSlave(1), undefined(2), unsolicited(3), invalidKeySequence(4), keyRequestAuthenticationFailure(5)} | read-only | current |
| cwrBpiRsTEKInvalidErrorString OBJECT-TYPE Display-String in most recent TEK Invalid message received by this TEK Service. This is a zero length string if no TEK Invalid message has been received since this TEK Service was started. | 1.3.6.1.4.1.9.9.135.1.1.2.1.10 | DisplayString | read-only | current |
| cwrBpiRmObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.135.1.2 | |||
| cwrBpiRmAuthTable OBJECT-TYPE Describes the attributes of each Radio Master authorization association. The Radio master maintains one authorization association with each Baseline Privacy-enabled Radio Slave on each Radio Master MAC interface. | 1.3.6.1.4.1.9.9.135.1.2.1 | not-accessible | current | |
| cwrBpiRmAuthEntry OBJECT-TYPE An entry containing objects describing attributes of one authorization association. The Radio master MUST create one entry per Radio Slave per MAC interface, based on the receipt of an Authorization Request message, and MUST not delete the entry before the Radio Slave authorization permanently expires. | 1.3.6.1.4.1.9.9.135.1.2.1.1 | not-accessible | current | |
| cwrBpiRmAuthPrivacyEnable OBJECT-TYPE This object identifies whether the Master Radio is provisioned to use Encryption or not. | 1.3.6.1.4.1.9.9.135.1.2.1.1.1 | TruthValue | read-write | current |
| cwrBpiRmAuthRsPublicKey OBJECT-TYPE Public key of the Radio Slave encoded as an ASN.1 SubjectPublicKeyInfo object as defined in the RSA Encryption Standard (PKCS #1) [RSA1]. This is a zero-length string if the Radio Master does not retain the public key. | 1.3.6.1.4.1.9.9.135.1.2.1.1.2 | OCTET STRING (SIZE(0..126)) | read-only | current |
| cwrBpiRmAuthRsKeySequenceNumber OBJECT-TYPE The authorization key sequence number for this Radio Slave. | 1.3.6.1.4.1.9.9.135.1.2.1.1.3 | INTEGER (0..15) | read-only | current |
| cwrBpiRmAuthRsExpires OBJECT-TYPE The number of seconds left before the current authorization for this Radio Slave expires. If this Radio Slave does not have an active authorization, then the value is zero. | 1.3.6.1.4.1.9.9.135.1.2.1.1.4 | TimeInterval | read-only | current |
| cwrBpiRmAuthRsLifetime OBJECT-TYPE Lifetime, in seconds, the Radio Master assigns to an authorization key for this Radio Slave. NOTE: When installed in the field, this variable should NEVER be set below 86400 which is the lower limit by standard. This variable accepts a wider range to facilitate testing. | 1.3.6.1.4.1.9.9.135.1.2.1.1.5 | INTEGER (1..6048000) | read-write | current |
| cwrBpiRmAuthRsReset OBJECT-TYPE Setting this object to True(1) causes the Radio Master to invalidate the current Radio Slave authorization key, to transmit an Authorization Invalid message to the Radio Slave, and to invalidate the unicast TEK associated with this Radio Slave authorization. Reading this object always returns False | 1.3.6.1.4.1.9.9.135.1.2.1.1.6 | TruthValue | read-write | current |
| cwrBpiRmAuthRsRequests OBJECT-TYPE Count of times the Radio Master has received an Authorization Request message from this Radio Slave. | 1.3.6.1.4.1.9.9.135.1.2.1.1.7 | Counter32 | read-only | current |
| cwrBpiRmAuthRsReplies OBJECT-TYPE Count of times the Radio master has transmitted an Authorization Reply message to this Radio Slave. | 1.3.6.1.4.1.9.9.135.1.2.1.1.8 | Counter32 | read-only | current |
| cwrBpiRmAuthRsInvalids OBJECT-TYPE Count of times the Radio Master has transmitted an Authorization Invalid message to this Radio Slave. | 1.3.6.1.4.1.9.9.135.1.2.1.1.9 | Counter32 | read-only | current |
| cwrBpiRmAuthInvalidErrorCode OBJECT-TYPE Error-Code in most recent Authorization Invalid message transmitted to the Radio Slave. On bootup, this has value no-information(0). At all other times, this object reflects the error code transmitted | 1.3.6.1.4.1.9.9.135.1.2.1.1.10 | INTEGER {noInformation(0), unauthorizedSlave(1), undefined(2), unsolicited(3), invalidKeySequence(4), keyRequestAuthenticationFailure(5)} | read-only | current |
| cwrBpiRmAuthInvalidErrorString OBJECT-TYPE Display-String in most recent Authorization Invalid message transmitted to the Radio Slave. This is a zero length string if no Authorization Invalid message has been transmitted to the Radio Slave. | 1.3.6.1.4.1.9.9.135.1.2.1.1.11 | DisplayString | read-only | current |
| cwrBpiRmTEKTable OBJECT-TYPE Describes the attributes of each Radio Slave Traffic Encryption Key (TEK) association. The Radio master maintains one TEK association for the Radio Slave. | 1.3.6.1.4.1.9.9.135.1.2.2 | not-accessible | current | |
| cwrBpiRmTEKEntry OBJECT-TYPE An entry containing objects describing attributes of one TEK service on a particular Radio Master MAC interface. The Radio Master MUST create one entry per TEK Service per MAC interface, based on the receipt of an Key Request message, and MUST not delete the entry before the Radio Slave authorization for that TEK Service permanently expires. | 1.3.6.1.4.1.9.9.135.1.2.2.1 | not-accessible | current | |
| cwrBpiRmTEKEncryptionNegotiated OBJECT-TYPE This identifies whether this TEK service is using encryption or not. Encryption may not be in use even though cwrBpiRmAuthPrivacyEnable is provisioned. This is possible if the master is not configured for privacy or it's not running an encryption capable image. | 1.3.6.1.4.1.9.9.135.1.2.2.1.1 | TruthValue | read-only | current |
| cwrBpiRmTEKLifetime OBJECT-TYPE Lifetime, in seconds, the Radio Master assigns to keys for this TEK association. NOTE: When installed in the field, this variable should NEVER be set below 1800 which is the lower limit by standard. This variable accepts a wider range to facilitate testing. | 1.3.6.1.4.1.9.9.135.1.2.2.1.2 | INTEGER (1..604800) | read-write | current |
| cwrBpiRmTEKExpiresOld OBJECT-TYPE The number of seconds left to expire for the oldest active key for this TEK association. If this TEK associateion has no active key then the value will be zero. | 1.3.6.1.4.1.9.9.135.1.2.2.1.3 | TimeInterval | read-only | current |
| cwrBpiRmTEKExpiresNew OBJECT-TYPE The number of seconds left to expire for the newest active key for this TEK association. If this TEK association has no active keys then this value will be zero. | 1.3.6.1.4.1.9.9.135.1.2.2.1.4 | TimeInterval | read-only | current |
| cwrBpiRmTEKReset OBJECT-TYPE Setting this object to TRUE causes the Radio Master to invalidate the current active TEK(s) (plural due to key transition periods), and to generate a new TEK. Reading this object always returns FALSE. | 1.3.6.1.4.1.9.9.135.1.2.2.1.5 | TruthValue | read-write | current |
| cwrBpiRmKeyRequests OBJECT-TYPE Count of times the Radio Master has received a Key Request message. | 1.3.6.1.4.1.9.9.135.1.2.2.1.6 | Counter32 | read-only | current |
| cwrBpiRmKeyReplies OBJECT-TYPE Count of times the Radio master has transmitted a Key Reply message. | 1.3.6.1.4.1.9.9.135.1.2.2.1.7 | Counter32 | read-only | current |
| cwrBpiRmTEKInvalids OBJECT-TYPE Count of times the Radio Master has transmitted a TEK Invalid message. | 1.3.6.1.4.1.9.9.135.1.2.2.1.8 | Counter32 | read-only | current |
| cwrBpiRmTEKInvalidErrorCode OBJECT-TYPE Error-Code in most recent TEK Invalid message sent in association with this TEK service. On bootup, this has value no-information(0). At all other times, this object reflects the error code received | 1.3.6.1.4.1.9.9.135.1.2.2.1.9 | INTEGER {noInformation(0), unauthorizedSlave(1), undefined(2), unsolicited(3), invalidKeySequence(4), keyRequestAuthenticationFailure(5)} | read-only | current |
| cwrBpiRmTEKInvalidErrorString OBJECT-TYPE Display-String in the most recent TEK Invalid message sent in ssociation with this BPI TEK service. This is a zero length string if no TEK Invalid message has been received since reboot. | 1.3.6.1.4.1.9.9.135.1.2.2.1.10 | DisplayString | read-only | current |
| cwrBpiNotification OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.135.2 | |||
| cwrBpiConformance OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.135.3 | |||
| cwrBpiCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.135.3.1 | |||
| cwrBpiGroups OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.135.3.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| cwrBpiBasicCompliance MODULE-COMPLIANCE The compliance statement for devices which implement the Cisco Wireless Radio point to point Baseline Privacy Interface. | 1.3.6.1.4.1.9.9.135.3.1.1 | current |
| cwrBpiRsGroup OBJECT-GROUP A collection of objects providing Radio Slave BPI status and control. | 1.3.6.1.4.1.9.9.135.3.2.1 | current |
| cwrBpiRmGroup OBJECT-GROUP A collection of objects providing Radio Master BPI status and control. | 1.3.6.1.4.1.9.9.135.3.2.2 | current |