MIBs Depot

CISCO-WAN-SRM-MIB

Registered at
1.3.6.1.4.1.351.110.3.10
1.3.6.1.4.1.351.110.3.22
1.3.6.1.4.1.351.150.30
Last updated
2002-08-26 00:00
Organization
Cisco Systems, Inc.
Revisions
2002-08-26 00:00
Namespace
cisco
Source file
CISCO-WAN-SRM-MIB
Digest
sha256:67ff261dd5d1c864f53ce89afa21897da5fee38e66aea8e7eabe71fb11ec351e

Description

The MIB module for configuration of bulk distribution (de-multiplexing of traffic from higher-bandwidth to lower-bandwidth interfaces). This is used for configuring bulk distribution of T3 interfaces on T1 modules supported in MGX82xx series. Some of the T1 modules are AUSM, FRSM,CESM. This MIB module also contains info. on configuring bulk distribution of SONET interfaces(VT interfaces) on T1 Modules. SRM - Service Resource Module SRME - Service Resource Module Enhanced.

Contact

Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-wanatm@cisco.com

Imports

FromSymbols
BASIS-MIBcardSpecific
CISCOWAN-SMIciscoWan
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIInteger32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BASIS-MIB
CISCO-WAN-SRM-MIB
CISCOWAN-SMI
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
srm3T3CnfGrp
OBJECT-IDENTITY
1.3.6.1.4.1.351.110.3.10
srm3T3CnfGrpTable
OBJECT-TYPE
The SRM 3T3 configuration table, it is the distribution of a T3 line.
1.3.6.1.4.1.351.110.3.10.1not-accessiblecurrent
srm3T3CnfGrpEntry
OBJECT-TYPE
an entry in the T3 configuration table
1.3.6.1.4.1.351.110.3.10.1.1not-accessiblecurrent
srmT3LineNum
OBJECT-TYPE
Select T3 line number. There is no default value for this object.
1.3.6.1.4.1.351.110.3.10.1.1.1Integer32 (1..3)read-onlycurrent
srmStartT1LineNum
OBJECT-TYPE
The start T1 number to be affected. There is no default value for this object.
1.3.6.1.4.1.351.110.3.10.1.1.2Integer32 (1..28)read-onlycurrent
srmT1RowStatus
OBJECT-TYPE
a command is used to add, delete, or modify one or more DS1 mapping. Default value is delete.
1.3.6.1.4.1.351.110.3.10.1.1.3INTEGER {add(1), delete(2), modify(3)}read-writecurrent
srmTargetSlotNum
OBJECT-TYPE
specify the target slot number to be linked. There is no default value for this object. For MGX8850: SRM01 services slots 1 - 6 and 9 - 14, SRM02 services slots 17 - 22 and 25 - 30 For MGX8220: SYNTAX Integer32 (5 ..14)
1.3.6.1.4.1.351.110.3.10.1.1.4Integer32 (1..32)read-writecurrent
srmTargetSlotLineNum
OBJECT-TYPE
0 means not assigned. There is no default value for this object.
1.3.6.1.4.1.351.110.3.10.1.1.5Integer32 (0..8)read-writecurrent
srmeCnfGrp
OBJECT-IDENTITY
1.3.6.1.4.1.351.110.3.22
srmeCnfGrpTable
OBJECT-TYPE
The SRME configuration table for bulk distribution of SRME lines.
1.3.6.1.4.1.351.110.3.22.1not-accessiblecurrent
srmeCnfGrpEntry
OBJECT-TYPE
an entry in the SRME Distribution configuration table
1.3.6.1.4.1.351.110.3.22.1.1not-accessiblecurrent
srmeLineNum
OBJECT-TYPE
This object identifies the SRME line number. For OC3/STM1: SYNTAX Integer32 1 There is no default value for this object.
1.3.6.1.4.1.351.110.3.22.1.1.1Integer32 (1..3)read-onlycurrent
srmeStartVtNum
OBJECT-TYPE
The start T1 or E1 number (virtual tributary) to be affected. For OC3 with T1 tributaries: SYNTAX Integer32 (1 .. 84) For STM1 with E1 tributaries: SYNTAX Integer32 (1 .. 63) There is no default value for this object.
1.3.6.1.4.1.351.110.3.22.1.1.2Integer32 (1..84)read-onlycurrent
srmeRowStatus
OBJECT-TYPE
Command used to add, delete, or modify one or more T1 or E1 mappings. Only the srmeVtFramingType object can be modified once the distribution link is added. To modify all other objects, user should first delete the link and add it again. Default value is modify(3).
1.3.6.1.4.1.351.110.3.22.1.1.3INTEGER {add(1), delete(2), modify(3)}read-writecurrent
srmeTargetSlotNum
OBJECT-TYPE
This object specifies the target slot number to be linked. There is no default value for this object. For MGX8x50: SRM01 services slots 1 - 6 and 9 - 14, SRM02 services slots 17 - 22 and 25 - 30 For MGX8x30: service slots 3-6 and 10-13.
1.3.6.1.4.1.351.110.3.22.1.1.4Integer32 (1..32)read-writecurrent
srmeTargetSlotLineNum
OBJECT-TYPE
Specify the target slot's line to be linked. The value zero means, the target line number is not assigned. There is no default value for this object.
1.3.6.1.4.1.351.110.3.22.1.1.5Integer32 (0..8)read-writecurrent
srmeVtFramingType
OBJECT-TYPE
Specifies the Framing Type of the target slot line. This is applicable only if the target module is a T1 Service Module and byte sync mapping is used on SRME. Not applicable to E1 Service Modules. sf: Superframe or D4 esf: Extended Superframe. Default is 'esf' if SRME lines are configured for byte-synchronous mapping, Else, the default is notApplicable.
1.3.6.1.4.1.351.110.3.22.1.1.6INTEGER {notApplicable(1), sf(2), esf(3)}read-writecurrent
ciscoWanSrmMIBConformance
OBJECT-IDENTITY
1.3.6.1.4.1.351.150.30.2
ciscoWanSrmMIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.351.150.30.2.1
ciscoWanSrmMIBCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.351.150.30.2.2

Conformance

NameOIDStatus
ciscoWanSrmConfGroup
OBJECT-GROUP
The collection of objects which are used for configuring bulk distribution for SRM module.
1.3.6.1.4.1.351.150.30.2.1.1current
ciscoWanSrmeConfGroup
OBJECT-GROUP
The collection of objects which are used for configuring bulk distribution for SRM-E module.
1.3.6.1.4.1.351.150.30.2.1.2current
ciscoWanSrmCompliance
MODULE-COMPLIANCE
The compliance statement for objects related to SRM MIB.
1.3.6.1.4.1.351.150.30.2.2.1current