MIBs Depot

CISCO-WAN-FR-SIGNALING-MIB

Registered at
1.3.6.1.4.1.351.110.5.1.1.1.2.1
1.3.6.1.4.1.351.110.5.1.1.1.2.2
1.3.6.1.4.1.351.110.5.1.1.2.2.1
1.3.6.1.4.1.351.110.5.1.1.2.2.2
1.3.6.1.4.1.351.150.46
Last updated
2003-03-24 00:00
Organization
Cisco Systems, Inc.
Revisions
2003-03-24 00:00, 2002-09-04 00:00
Namespace
cisco
Source file
CISCO-WAN-FR-SIGNALING-MIB
Digest
sha256:358cccfbed0e382d5a1f21311cdf6bd9a802804ea6c39de707ebd705659753e2

Description

The MIB module to configure LMI and CLLM on a frame relay ports. This mib module also contains objects to represent LMI and CLLM statistics information. The frame relay logical port is referred to as 'frame relay port' in this mib. The 'logical port' refers to frame relay port. LMI : Local Management Interface. The Frame Relay LMI is a set of enhancements to the basic Frame Relay Specification. The Key Frame Relay LMI extensions include global addressing, virtual circuit status messages and multicasting. The LMI includes support for a keepalive mechanism, which verifies that data is flowing, and a status mechanism, which provides an on-going status report on the DLCIs known to the switch. The LMI Global Addressing extension gives Frame Relay DLCI values global rather than local significance. The global addressing extension adds functionality and manageability to Frame Relay internetworks. The LMI virtual circuit messages provide communication and synchronization between Frame Relay DTE and DCE devices. These messages are periodically report on the status of PVCs, which prevents data from being sent into black holes(that, over PVCs that no longer exist). LMI UNI signaling enables subscribers to find out about the PVC status of the network, thus inhibiting the use of an unavailable PVC and supplies procedures for detecting and modifying following events: * deletion of a PVC * addition of a PVC * availability of a configured PVC * unavailability of a configured PVC * error due to LMI message sequencing ELMI : Enhanced LMI ELMI allows the router to learn QoS(Quality of Service) parameters from the switch and use them for traffic shaping, configuration or management purposes. CLLM : Consolidated Link Layer Management. The CLLM is an out-of-band mechanism to transport congestion-related information to the far end. The CLLM enables the Frame Relay network to more efficiently relay congestion notifications to the DTE(router). The CLLM congestion notification is sent on the reserved data link connection identifier(DLCI) 1023. Frame Forwarding Port: Frame Forwarding Ports are identified by portType = frame-forward(3). The signaling parameters are not applicable to these ports.

Contact

Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-wanatm@cisco.com

Imports

FromSymbols
BASIS-MIBfrPortCnfSig, frPortCntSig
CISCOWAN-SMIciscoWan
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BASIS-MIB
CISCO-WAN-FR-SIGNALING-MIB
CISCOWAN-SMI
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
frPortCnfSigLMIGrp
OBJECT-IDENTITY
1.3.6.1.4.1.351.110.5.1.1.1.2.1
frPortCnfSigLMIGrpTable
OBJECT-TYPE
This table is for configuration of singaling(LMI) on frame relay ports.
1.3.6.1.4.1.351.110.5.1.1.1.2.1.1not-accessiblecurrent
frPortCnfSigLMIGrpEntry
OBJECT-TYPE
An entry for each frame relay port. The entries are applicable only for following ports: portType = frame-relay(1), portType = frFUNI(2). This table is not applicable for Frame Forwarding ports,i.e portType = frame-forward(3).
1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1not-accessiblecurrent
lmiCnfPortNum
OBJECT-TYPE
The value of this object identifies the frame relay port. The value of this object must be same as the value of 'portNum' from frPortCnfPortGrpTable. The Frame Forwarding Port value is not valid for this object.
1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.1Integer32 (1..2147483647)read-onlycurrent
signallingProtocolType
OBJECT-TYPE
The value of this object is used for configuring the LMI signaling protocol type. 1 - other. Not a valid value for SET request. 2 - noSignalling 3 - strataLMI 4 - annexAUNI 5 - annexDUNI 6 - annexANNI 7 - annexDNNI The ports with portType = frame-forward(3) can be set to noSingalling(2) only. The value strataLMI(3) is not supported for portHeaderLen = fourOctets(2).
1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.2INTEGER {other(1), noSignalling(2), strataLMI(3), annexAUNI(4), annexDUNI(5), annexANNI(6), annexDNNI(7)}read-writecurrent
asynchronousUpdates
OBJECT-TYPE
This object is used for configuring asynchronous updates. The possible values are : disable(1) : disable Asynchronous Status Updates & Unsolicited Full Status enable(2) : enable Asynchronous Status Updates fsenable(3) : enable Unsolicited Full Status updfsenable(4) : enable Asynchronous Status Updates & Unsolicited Full Status.
1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.3INTEGER {disable(1), enable(2), fsenable(3), updfsenable(4)}read-writecurrent
t391LinkIntegrityTimer
OBJECT-TYPE
The value of this object identifies the desired User-side T391 link integrity verification polling timer value for this UNI/NNI logical port.
1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.4Integer32 (5..30)read-writecurrent
t392PollingVerificationTimer
OBJECT-TYPE
The value of this object identifies the desired Network-side T392 polling verification timer value (nT2 for LMI) for this UNI/NNI logical port. This is the length of time the network should wait between Status Inquiry Messages.
1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.5Integer32 (5..30)read-writecurrent
n391FullStatusPollingCounter
OBJECT-TYPE
The value of this object identifies the User-Side 391 full status polling cycle value for this UNI/NNI logical port.
1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.6Integer32 (1..255)read-writecurrent
n392ErrorThreshold
OBJECT-TYPE
The value of this object identifies the desired User-side/Network-side N392 error threshold value for this UNI/NNI logical port.
1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.7Integer32 (1..10)read-writecurrent
n393MonitoredEventCount
OBJECT-TYPE
The value of this object identifies the desired User-side/Network-side N393 monitored events count value for this UNI/NNI logical port.
1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.8Integer32 (1..10)read-writecurrent
enhancedLmi
OBJECT-TYPE
This object enables/disables the Enhanced LMI (ELMI) on the frame relay port.
1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.9INTEGER {disable(1), enable(2)}read-writecurrent
portFRF1Dot2Support
OBJECT-TYPE
This object enables/disables the FRF 1.2 feature. This object is added for FRSM12. This object is not applicable to MGX Release 1.x
1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.10INTEGER {enable(1), disable(2)}read-writecurrent
portLmiSigConfMethod
OBJECT-TYPE
This object enables/disables the port LMI signalling autosense. Setting this object to autosense(2) enables the port to autodetect and configure port LMI signalling type. signallingProtocolType mib should be set to noSignalling while this object is being set to autosense(2). If signallingProtocolType mib is set to a value other than noSignalling while this object is being set to autosense(2), the set request fails. When this object is set to manual(1), user needs to manually configure the port LMI signalling type using the signallingProtocolType mib. signallingProtocolType can be configured to any valid value including noSignalling when this object is set to manual(1).
1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.11INTEGER {manual(1), autosense(2)}read-writecurrent
frPortCnfSigCLLMGrp
OBJECT-IDENTITY
1.3.6.1.4.1.351.110.5.1.1.1.2.2
frPortCnfSigCLLMGrpTable
OBJECT-TYPE
This table is configuring the CLLM on frame relay ports. This table is not applicable for Frame Forwarding ports.
1.3.6.1.4.1.351.110.5.1.1.1.2.2.1not-accessiblecurrent
frPortCnfSigCLLMGrpEntry
OBJECT-TYPE
An entry for each frame relay port. The entries are applicable only for following ports: portType = frame-relay(1), portType = frFUNI(2). This table is not applicable for Frame Forwarding ports,i.e portType = frame-forward(3).
1.3.6.1.4.1.351.110.5.1.1.1.2.2.1.1not-accessiblecurrent
cllmCnfPortNum
OBJECT-TYPE
The value of this object identifies the frame relay port. The value of this object must be same as the value of 'portNum' from frPortCnfPortGrpTable. The Frame Forwarding Port value is not valid for this object.
1.3.6.1.4.1.351.110.5.1.1.1.2.2.1.1.1Integer32 (1..2147483647)read-onlycurrent
cllmEnable
OBJECT-TYPE
This object is used for enabling/disabling CLLM on frame relay port. When set to 'disabled', CLLM is disabled. When set to 'enabled', CLLM is enabled.
1.3.6.1.4.1.351.110.5.1.1.1.2.2.1.1.2INTEGER {disable(1), enable(2)}read-writecurrent
xmtCLLMStatusTimer
OBJECT-TYPE
Interval in milliseconds for CLLM to send CLLM updates.
1.3.6.1.4.1.351.110.5.1.1.1.2.2.1.1.3Integer32 (40..5000)read-writecurrent
rcvCLLMStatusTimer
OBJECT-TYPE
Timeout value for receiving CLLM updates.
1.3.6.1.4.1.351.110.5.1.1.1.2.2.1.1.4INTEGER {rcvCLLMTimerValue(1000)}read-onlycurrent
frPortCntSigLMIGrp
OBJECT-IDENTITY
1.3.6.1.4.1.351.110.5.1.1.2.2.1
frPortCntSigLMIGrpTable
OBJECT-TYPE
This table contains the LMI statistics of frame relay ports.
1.3.6.1.4.1.351.110.5.1.1.2.2.1.1not-accessiblecurrent
frPortCntSigLMIGrpEntry
OBJECT-TYPE
An entry for each frame relay port. Each entry identifies the LMI statistics supported on a frame relay port. The entries are applicable only for following ports: portType = frame-relay(1), portType = frFUNI(2). This table is not applicable for Frame Forwarding ports,i.e portType = frame-forward(3).
1.3.6.1.4.1.351.110.5.1.1.2.2.1.1.1not-accessiblecurrent
lmiSigPortNum
OBJECT-TYPE
The value of this object refers to the frame relay port. The value for this object must be same as the 'portNum' object defined in frPortCnfPortGrpTable. The frame forwarding port value is not valid for this object.
1.3.6.1.4.1.351.110.5.1.1.2.2.1.1.1.1Integer32 (1..2147483647)read-onlycurrent
rcvStatusInquiry
OBJECT-TYPE
The number of Status Inquiry messages received.
1.3.6.1.4.1.351.110.5.1.1.2.2.1.1.1.2Counter32read-onlycurrent
rcvInvalidRequest
OBJECT-TYPE
The number of Invalid Request messages received.
1.3.6.1.4.1.351.110.5.1.1.2.2.1.1.1.3Counter32read-onlycurrent
rcvUNISeqMismatch
OBJECT-TYPE
The number of times UNI messages with sequence number mismatches were received.
1.3.6.1.4.1.351.110.5.1.1.2.2.1.1.1.4Counter32read-onlycurrent
xmtStatus
OBJECT-TYPE
The number of times Status response messages transmitted.
1.3.6.1.4.1.351.110.5.1.1.2.2.1.1.1.5Counter32read-onlycurrent
xmtAsynchUpdate
OBJECT-TYPE
The number of times Asynch Status messages transmitted.
1.3.6.1.4.1.351.110.5.1.1.2.2.1.1.1.6Counter32read-onlycurrent
uniSignalingTimeout
OBJECT-TYPE
The number of times UNI Status requests were not received.
1.3.6.1.4.1.351.110.5.1.1.2.2.1.1.1.7Counter32read-onlycurrent
xmtStatusInquiry
OBJECT-TYPE
The number of Status Inquiry messages transmitted.
1.3.6.1.4.1.351.110.5.1.1.2.2.1.1.1.8Counter32read-onlycurrent
rcvStatus
OBJECT-TYPE
The number of times Status response messages received.
1.3.6.1.4.1.351.110.5.1.1.2.2.1.1.1.9Counter32read-onlycurrent
rcvAsynchUpdate
OBJECT-TYPE
The number of times Asynch Status messages received
1.3.6.1.4.1.351.110.5.1.1.2.2.1.1.1.10Counter32read-onlycurrent
rcvNNISeqMismatch
OBJECT-TYPE
The number of times NNI messages with sequence number mismatches were received.
1.3.6.1.4.1.351.110.5.1.1.2.2.1.1.1.11Counter32read-onlycurrent
nniSignalingTimeout
OBJECT-TYPE
The number of times NNI Status requests were not received.
1.3.6.1.4.1.351.110.5.1.1.2.2.1.1.1.12Counter32read-onlycurrent
frPortCntSigCLLMGrp
OBJECT-IDENTITY
1.3.6.1.4.1.351.110.5.1.1.2.2.2
frPortCntSigCLLMGrpTable
OBJECT-TYPE
This table is for CLLM statistics for frame relay ports.
1.3.6.1.4.1.351.110.5.1.1.2.2.2.1not-accessiblecurrent
frPortCntSigCLLMGrpEntry
OBJECT-TYPE
An entry for frame relay port. The entries are applicable only for following ports: portType = frame-relay(1), portType = frFUNI(2). This table is not applicable for Frame Forwarding ports,i.e portType = frame-forward(3).
1.3.6.1.4.1.351.110.5.1.1.2.2.2.1.1not-accessiblecurrent
cllmSigPortNum
OBJECT-TYPE
The value of this object identifies the frame relay port. The value of this object must be same as the value of 'portNum' from frPortCnfPortGrpTable. The Frame Forwarding Port value is not valid for this object.
1.3.6.1.4.1.351.110.5.1.1.2.2.2.1.1.1Integer32 (1..2147483647)read-onlycurrent
rcvFramesCLLM
OBJECT-TYPE
The number of CLLM frames received.
1.3.6.1.4.1.351.110.5.1.1.2.2.2.1.1.2Counter32read-onlycurrent
rcvBytesCLLM
OBJECT-TYPE
The number of CLLM bytes received.
1.3.6.1.4.1.351.110.5.1.1.2.2.2.1.1.3Counter32read-onlycurrent
xmtFramesCLLM
OBJECT-TYPE
The number of CLLM frames transmitted.
1.3.6.1.4.1.351.110.5.1.1.2.2.2.1.1.4Counter32read-onlycurrent
xmtBytesCLLM
OBJECT-TYPE
The number of CLLM bytes transmitted.
1.3.6.1.4.1.351.110.5.1.1.2.2.2.1.1.5Counter32read-onlycurrent
cllmFailures
OBJECT-TYPE
The number of times an expected CLLM message was not received.
1.3.6.1.4.1.351.110.5.1.1.2.2.2.1.1.6Counter32read-onlycurrent
cwfSignalingMIBConformance
OBJECT-IDENTITY
1.3.6.1.4.1.351.150.46.2
cwfSignalingMIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.351.150.46.2.1
cwfSignalingMIBCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.351.150.46.2.2

Conformance

NameOIDStatus
ciscoWanFrLmiConfigGroup
OBJECT-GROUP
A collection of objects providing information applicable to Frame Relay Logical Ports (Frame Relay Ports).
1.3.6.1.4.1.351.150.46.2.1.1current
ciscoWanFrLmiStatsGroup
OBJECT-GROUP
A collection of objects providing information applicable to LMI statistics on Frame Relay Ports.
1.3.6.1.4.1.351.150.46.2.1.2current
ciscoWanFrCllmGroup
OBJECT-GROUP
A collection of objects providing information on CLLM applicable to Frame Relay Ports.
1.3.6.1.4.1.351.150.46.2.1.3current
ciscoWanFrCllmStatsGroup
OBJECT-GROUP
A collection of objects providing information applicable to CLLMI statistics on Frame Relay Ports.
1.3.6.1.4.1.351.150.46.2.1.4current
cwfSignalingMIBCompliance
MODULE-COMPLIANCE
The compliance statement for SNMP entities which have network interfaces.
1.3.6.1.4.1.351.150.46.2.2.1current