CISCO-WAN-FEEDER-MIB
- Registered at
- 1.3.6.1.4.1.351.150.15
- Last updated
- 2003-03-27 00:00
- Organization
- Cisco Systems, Inc.
- Revisions
- 2003-03-27 00:00, 2000-10-10 00:00, 2000-04-25 00:00
- Namespace
- cisco
- Source file
CISCO-WAN-FEEDER-MIB- Digest
sha256:48b599c66e3b71dee0e21b2c378a9508695663100f9e6592aa4422cd176ff73a
Description
This MIB is used for configuring a port on an ATM switch module to be aware of feeder connection information. Terminology: AR - Auto Route, a CISCO proprietary feature, provides connection management for network with only CISCO nodes such as BPX or IGX. Feeder - An external ATM switch, which does not have PNNI feature, connected to an ATM switch that supports PNNI to provide LMI. LMI - Local Management Interface is an interface to provide a set of enhancements to Frame Relay specification for managing complex internetworks. LMI extensions include global addressing, virtual-circuit status messages, and multicasting. XLMI - The Extended LMI is a type of LMI which is implemented in an AR + PNNI network.
Contact
Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-wanatm@cisco.com
Imports
| From | Symbols |
|---|---|
| CISCOWAN-SMI | ciscoWan |
| IF-MIB | InterfaceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCO-WAN-FEEDER-MIB CISCOWAN-SMI IANAifType-MIB IF-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| cwfMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.351.150.15.1 | |||
| cwfFeeder OBJECT-IDENTITY | 1.3.6.1.4.1.351.150.15.1.1 | |||
| cwfFeederTable OBJECT-TYPE This table contains the entries for the feeders. It is used for addition or deletion of feeders and to support LMI on the feeders. The information in these entries are advertised to LMI using a system dependent implementation when an entry is created/activated. This table can also be applicable to XLMI. | 1.3.6.1.4.1.351.150.15.1.1.1 | not-accessible | current | |
| cwfFeederEntry OBJECT-TYPE An entry in cwfFeederTable. | 1.3.6.1.4.1.351.150.15.1.1.1.1 | not-accessible | current | |
| cwfFeederIfNum OBJECT-TYPE This is an unique interface number of an ATM virtual interface. The value of this object is equal to the ifIndex of the ATM virtual interface interface identified by ifType atmVirtual(149). | 1.3.6.1.4.1.351.150.15.1.1.1.1.1 | InterfaceIndex | not-accessible | current |
| cwfFeederName OBJECT-TYPE This is the name of the feeder. It contains a string of length zero, if the feeder name is not available. | 1.3.6.1.4.1.351.150.15.1.1.1.1.2 | DisplayString | read-only | current |
| cwfLanIP OBJECT-TYPE This is the LAN IP address of the feeder. This IP address is used for ethernet interface. | 1.3.6.1.4.1.351.150.15.1.1.1.1.3 | IpAddress | read-only | current |
| cwfNetIP OBJECT-TYPE This is the network IP address of the feeder. This IP address is used for ATM interface. | 1.3.6.1.4.1.351.150.15.1.1.1.1.4 | IpAddress | read-only | current |
| cwfRemoteShelf OBJECT-TYPE This is the remote shelf number of the feeder module. | 1.3.6.1.4.1.351.150.15.1.1.1.1.5 | Integer32 (1..4) | read-only | current |
| cwfRemoteSlot OBJECT-TYPE This is the remote slot number of the feeder module. | 1.3.6.1.4.1.351.150.15.1.1.1.1.6 | Integer32 (1..32) | read-only | current |
| cwfRemotePort OBJECT-TYPE This is the remote physical port(line) number of the feeder module. | 1.3.6.1.4.1.351.150.15.1.1.1.1.7 | Integer32 (1..64) | read-only | current |
| cwfFeederType OBJECT-TYPE This identifies the feeeder type. fdrNON(12) is applicable when cwfLMIType is xLMI(2). Other values are applicable for cwfLMIType = feeder(1). The possible values are: fdrIPX -- Feeder is an IPX node in a routing network fdrBPX -- Feeder is an BPX node in a routing network fdrIpxAF -- Feeder is a stand-alone IPX node fdrBASIS -- Feeder is a stand-alone BASIS node fdrUNKNOWN -- Feeder is unknown fdrUNI -- Feeder is a UNI AIT (phase 0) fdrAPS -- Feeder is an APS (Adjunct Processor Shelf) fdrIGX -- Feeder is an IGX node in a routing network fdrIgxAF -- Feeder is a stand-alone IGX node fdrVSI -- Feeder is an VSI Controller fdrPAR -- Feeder is a PAR fdrNON -- Non-feeder type | 1.3.6.1.4.1.351.150.15.1.1.1.1.8 | INTEGER {fdrIPX(1), fdrBPX(2), fdrIpxAF(3), fdrBASIS(4), fdrUNKNOWN(5), fdrUNI(6), fdrAPS(7), fdrIGX(8), fdrIgxAF(9), fdrVSI(10), fdrPAR(11), fdrNON(12)} | read-only | current |
| cwfModelNumber OBJECT-TYPE This identifies the feeder model number. | 1.3.6.1.4.1.351.150.15.1.1.1.1.9 | Integer32 (1..2147483647) | read-only | current |
| cwfLMIAdminStatus OBJECT-TYPE This provides the feeder LMI admin state configuration capabilities for the desired state of interface. The value of this object is ignored during row creation. | 1.3.6.1.4.1.351.150.15.1.1.1.1.10 | INTEGER {up(1), down(2)} | read-create | current |
| cwfLMIOperStatus OBJECT-TYPE This provides the operational state of the LMI connection. | 1.3.6.1.4.1.351.150.15.1.1.1.1.11 | INTEGER {up(1), down(2)} | read-only | current |
| cwfFeederNodeAlarm OBJECT-TYPE This identifies the feeder node alarm status. It provides the alarm status in hierarchical order where by if there are no feeder node alarms, it is signified by <clear>. If minor alarms, with no major alarms, it is signified by <minor>. If the node has one or more major alarms, irrespective of the minor alarm status, then it is signified by <major>. | 1.3.6.1.4.1.351.150.15.1.1.1.1.12 | INTEGER {clear(1), minor(2), major(3), critical(4), unknown(5)} | read-only | current |
| cwfFeederRowStatus OBJECT-TYPE This is used for adding or deleting a feeder entry. The row can be created by setting this object to 'createAndGo(4)'. The row can be deleted by setting this object to 'destroy(6)'. No other values are supported. | 1.3.6.1.4.1.351.150.15.1.1.1.1.13 | RowStatus | read-create | current |
| cwfLMIType OBJECT-TYPE This identifies the LMI type. It identifies the type of network to which the LMI port is connected to. | 1.3.6.1.4.1.351.150.15.1.1.1.1.14 | INTEGER {feeder(1), xLMI(2)} | read-create | current |
| cwfMIBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.351.150.15.3 | |||
| cwfMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.351.150.15.3.1 | |||
| cwfMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.351.150.15.3.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| cwfMIBCompliance MODULE-COMPLIANCE The compliance statement for feeder group. | 1.3.6.1.4.1.351.150.15.3.1.1 | deprecated |
| cwfMIBCompliance2 MODULE-COMPLIANCE The Compliance statement for feeder group. | 1.3.6.1.4.1.351.150.15.3.1.2 | current |
| cwfFeederGroup OBJECT-GROUP The objects related to configuring a feeder. | 1.3.6.1.4.1.351.150.15.3.2.1 | deprecated |
| cwfFeederGroup2 OBJECT-GROUP The objects related to configuring feeder and non-feeder(XLMI). | 1.3.6.1.4.1.351.150.15.3.2.2 | current |