CISCO-WAN-CES-RSRC-PART-MIB
- Registered at
- 1.3.6.1.4.1.351.110.5.3.1.21.3.6.1.4.1.351.150.41
- Last updated
- 2002-09-03 00:00
- Organization
- Cisco Systems, Inc.
- Revisions
- 2002-09-03 00:00
- Namespace
- cisco
- Source file
CISCO-WAN-CES-RSRC-PART-MIB- Digest
sha256:1df5df918282cf11917d322f3d3beb9ef971ee1243a2dd7b367a95e71c494c88
Description
The mib module to configure the resource partition on Circuit Emulation Service(CES) ports. This is applicable for service modules providing the Circuit Emulation Services.
Contact
Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-wanatm@cisco.com
Imports
| From | Symbols |
|---|---|
| CISCO-WAN-CES-PORT-MIB | cesmPort |
| CISCOWAN-SMI | ciscoWan |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
BASIS-MIB CISCO-WAN-CES-PORT-MIB CISCO-WAN-CES-RSRC-PART-MIB CISCOWAN-SMI SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| cesmPortCnfResPartGrp OBJECT-IDENTITY | 1.3.6.1.4.1.351.110.5.3.1.2 | |||
| cesmPortCnfResPartGrpTable OBJECT-TYPE This table is for configuring the resource partition parameters. | 1.3.6.1.4.1.351.110.5.3.1.2.1 | not-accessible | current | |
| cesmPortCnfResPartGrpEntry OBJECT-TYPE An entry for a resource partition. A resource partition have to be created before connections can be added to the logical ports. | 1.3.6.1.4.1.351.110.5.3.1.2.1.1 | not-accessible | current | |
| cesmResPartPortNum OBJECT-TYPE The value of this object identifies the CES port. The value of this object must be same as the value of 'cesPortNum' from cesmPortCnfGrpTable. | 1.3.6.1.4.1.351.110.5.3.1.2.1.1.1 | Integer32 (1..2048) | read-only | current |
| cesmResPartCtrlrNum OBJECT-TYPE This object identifies the controller which can be used for accessing the resources. The possible values are : par(1) : Portable Auto Route controller. : This value is applicable in Release 1.x. pnni(2): PNNI Controller. : This value is applicable in Release 2.x. tag(3) : MPLS(Formerly known as Tag Switch)Controller | 1.3.6.1.4.1.351.110.5.3.1.2.1.1.2 | INTEGER {par(1), pnni(2), tag(3)} | read-only | current |
| cesmResPartRowStatus OBJECT-TYPE This object is used for adding/deleting/modifying resource partition on a CES port. In MGX Release 1.x: To add an entry, this object should be set to add(1), value for other objects should not be specified. In MGX Release 2.x: To add an entry, this object should be set to add(1). To delete an entry, this object has to be set to del(2). The resource partition can be deleted only after deleting all the connections (LCNs). | 1.3.6.1.4.1.351.110.5.3.1.2.1.1.3 | INTEGER {add(1), del(2), mod(3)} | read-write | current |
| cesmResPartNumOfLcnAvail OBJECT-TYPE This represents number of LCNs available for this controller and this port. In CESM-T3/E3 and 8-T1/E1,this value is 1. | 1.3.6.1.4.1.351.110.5.3.1.2.1.1.4 | Integer32 (0..2048) | read-write | current |
| cesmResPartLcnLow OBJECT-TYPE This represents low end of reserved LCN In CESM-8T1/E1 and T3/E3, this refers to the logical port. | 1.3.6.1.4.1.351.110.5.3.1.2.1.1.5 | Integer32 (1..2048) | read-write | current |
| cesmResPartLcnHigh OBJECT-TYPE This represents high end of reserved LCN In CESM-8T1/E1 and T3/E3, this refers to the logical port. | 1.3.6.1.4.1.351.110.5.3.1.2.1.1.6 | Integer32 (1..2048) | read-write | current |
| cesmResPartIngrPctBW OBJECT-TYPE The percentage of total ingress bandwidth reserved. In CESM-8T1/E1 and T3/E3, as there is only one LCN per port and it could be used by only one controller,this value is 100% for that controller. | 1.3.6.1.4.1.351.110.5.3.1.2.1.1.7 | Integer32 (0..100) | read-write | current |
| cesmResPartEgrPctBW OBJECT-TYPE The percentage of total egress bandwidth reserved In CESM-8T1/E1 and T3/E3, as there is only one LCN per port and it could be used by only one controller,this value is 100% for that controller. | 1.3.6.1.4.1.351.110.5.3.1.2.1.1.8 | Integer32 (0..100) | read-write | current |
| cesmResPartCtrlrID OBJECT-TYPE This is the controller identifier for the resource patition. The default value is set for PNNI controller. | 1.3.6.1.4.1.351.110.5.3.1.2.1.1.9 | Integer32 (1..255) | read-write | current |
| cwcRsrcPartMIBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.351.150.41.2 | |||
| cwcRsrcPartMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.351.150.41.2.1 | |||
| cwcRsrcPartMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.351.150.41.2.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| ciscoWanCesRsrcPartCompliance MODULE-COMPLIANCE The compliance statement for entities which implement the Broad band Interface Resource Partition MIB. | 1.3.6.1.4.1.351.150.41.2.1.1 | current |
| ciscoWanCesRsrcPartGroup OBJECT-GROUP A collection of objects providing the resource partition configuration on CES ports. | 1.3.6.1.4.1.351.150.41.2.2.1 | current |