CISCO-WAN-BBIF-ILMI-MIB
- Registered at
- 1.3.6.1.4.1.351.110.5.2.6.1.21.3.6.1.4.1.351.110.5.2.6.4.21.3.6.1.4.1.351.150.33
- Last updated
- 2002-12-20 00:00
- Organization
- Cisco Systems, Inc.
- Revisions
- 2002-12-20 00:00
- Namespace
- cisco
- Source file
CISCO-WAN-BBIF-ILMI-MIB- Digest
sha256:b4bd7f80b161b6921467cbdc3576bb40a6cf6ace00234a08fa58fd3cbd9751e9
Description
The MIB module for ILMI configuration and ILMI statistics for broad band interface ports in PXM1 service module. PXM1 service module is supported in MGX82xx series products. The broadband interface referred to in this mib is for ATM logical ports.
Contact
Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-wanatm@cisco.com
Imports
| From | Symbols |
|---|---|
| ATM-TC-MIB | AtmIlmiNetworkPrefix |
| BASIS-MIB | bbIfCnf, bbIfCnt |
| CISCOWAN-SMI | ciscoWan |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
ATM-TC-MIB BASIS-MIB CISCO-WAN-BBIF-ILMI-MIB CISCOWAN-SMI SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| bbIfCnfSigILMIGrp OBJECT-IDENTITY | 1.3.6.1.4.1.351.110.5.2.6.1.2 | |||
| bbIfCnfSigILMIGrpTable OBJECT-TYPE This table contains ILMI configuration parameters for a broadband interface. | 1.3.6.1.4.1.351.110.5.2.6.1.2.1 | not-accessible | current | |
| bbIfCnfSigILMIGrpEntry OBJECT-TYPE An entry for a boradband interface used as a UNI port. Each entry contains ILMI configuration parameters and variables for a broadband interface. | 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1 | not-accessible | current | |
| bbIfSigPortNum OBJECT-TYPE This object refers to the broadband interface. The value for this object is same as value specified in bbIfNum object from bbIfCnfGrpTable. | 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.1 | Integer32 (1..32) | read-only | current |
| bbIfIlmiEnable OBJECT-TYPE The logical interface is a generic entity, it can be used as either a virtual trunk, or user port with UNI support. This variable is provided to enable/disable ILMI. ILMI should only be enabled on 'user ports' and not on 'virtual trunks' 1 - disable 2 - enable | 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.2 | INTEGER {disable(1), enable(2)} | read-write | current |
| bbIfSignallingProtocolType OBJECT-TYPE This will set the signalling protocol other(1) : other noSignalling(2) : noSignalling iLMI(3) : ILMI | 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.3 | INTEGER {other(1), noSignalling(2), iLMI(3)} | read-write | current |
| bbIfSignallingVpi OBJECT-TYPE This object specifies the VPI on which signalling cells received. | 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.4 | Integer32 (0..4095) | read-write | current |
| bbIfSignallingVci OBJECT-TYPE This object specifies the VPI on which signalling cells received. | 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.5 | Integer32 (0..65535) | read-write | current |
| bbIfAddrPrefix OBJECT-TYPE Network Prefix for the ATM address. | 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.6 | AtmIlmiNetworkPrefix | read-write | current |
| bbIfCustomerId OBJECT-TYPE This represents the customer Id. | 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.7 | Integer32 | read-write | current |
| bbIfProtocolRevNo OBJECT-TYPE This object represents the protocol revision number. | 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.8 | Integer32 | read-write | current |
| bbIfIlmiTrapEnable OBJECT-TYPE This object is used for enabling/disabling the sending of ILMI traps. | 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.9 | INTEGER {disable(1), enable(2)} | read-write | current |
| bbIfMinTrapInterval OBJECT-TYPE This object specifies the minimum throttling period of notification generation. The notificaton events should be suppressed by the agent until the current throttling period expires. | 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.10 | Integer32 (1..10) | read-write | current |
| bbIfKeepAlivePollingEnable OBJECT-TYPE Enable/disable Keep Alive Polling. | 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.11 | INTEGER {disable(1), enable(2)} | read-write | current |
| bbIfErrorThresholdN491 OBJECT-TYPE This object specifies Error Threshold (N491) value. The number of keep alive polls that must fail within a window of N491 polls, before the port is placed in the failed state. This attribute is applicable only when bbIfSignallingProtocolType set to iLMI(3). | 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.12 | Integer32 (1..10) | read-write | current |
| bbIfEventThresholdN492 OBJECT-TYPE This object specifies Error Threshold (N492) value. The number of keep alive polls that must fail within a window of N492 polls, before the port is placed in the failed state. This attribute is applicable only when bbIfSignallingProtocolType set to iLMI(3). | 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.13 | Integer32 (1..10) | read-write | current |
| bbIfPollingIntervalT491 OBJECT-TYPE This object specifies Polling Interval (T491) value. The T491 value is the number of seconds between each keep alive poll transmitted by port. This attribute is applicable only when bbIfSignallingProtocolType set to iLMI(3). | 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.14 | INTEGER {v1(5), v2(10), v3(15), v4(20), v5(25), v6(30), v7(35), v8(40), v9(45), v10(50), v11(55), v12(60)} | read-write | current |
| bbIfMinEnquiryIntervalT493 OBJECT-TYPE This object specifies minimum Enquiry Interval(T493) value. The T493 value is the number of seconds between each keep alive poll transmitted by port. This attribute is applicable only when bbIfSignallingProtocolType set to iLMI(3). | 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.15 | Integer32 (1..20) | read-write | current |
| bbIfAddrRegEnable OBJECT-TYPE Enable/disable ILMI Address Registration. | 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.16 | INTEGER {disable(1), enable(2)} | read-write | current |
| bbIfCntSigILMIGrp OBJECT-IDENTITY | 1.3.6.1.4.1.351.110.5.2.6.4.2 | |||
| bbIfCntSigILMIGrpTable OBJECT-TYPE This table contains statistics related to ILMI. | 1.3.6.1.4.1.351.110.5.2.6.4.2.1 | not-accessible | current | |
| bbIfCntSigILMIGrpEntry OBJECT-TYPE An entry for a boradband interface used as a UNI port. | 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1 | not-accessible | current | |
| sigCntBbIfNum OBJECT-TYPE This object refers to the broadband interface. The value for this object is same as value specified in bbIfSigPortNum object from bbIfCnfSigILMIGrpTable. | 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.1 | Integer32 (1..32) | read-only | current |
| bbIfSnmpPduReceived OBJECT-TYPE The number of snmp packets received on this logical interface. | 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.2 | Counter32 | read-only | current |
| bbIfGetRequestReceived OBJECT-TYPE The number of get request messages received. | 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.3 | Counter32 | read-only | current |
| bbIfGetNextRequestReceived OBJECT-TYPE The number of get-next messages received. | 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.4 | Counter32 | read-only | current |
| bbIfSetRequestReceived OBJECT-TYPE The number of set messages received. | 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.5 | Counter32 | read-only | current |
| bbIfTrapReceived OBJECT-TYPE The number of traps received. | 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.6 | Counter32 | read-only | current |
| bbIfGetResponseReceived OBJECT-TYPE The number of Keep Alive response messages received. | 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.7 | Counter32 | read-only | current |
| bbIfGetResponseTransmitted OBJECT-TYPE The number of response messages transmitted. | 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.8 | Counter32 | read-only | current |
| bbIfGetRequestTransmitted OBJECT-TYPE The number of Keep Alive get request messages transmitted. | 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.9 | Counter32 | read-only | current |
| bbIfTrapTransmitted OBJECT-TYPE The number of trap messages transmitted. | 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.10 | Counter32 | read-only | current |
| bbIfInvalidPDUReceived OBJECT-TYPE The number of invalid PDUs received. | 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.11 | Counter32 | read-only | current |
| bbIfAsn1ParseError OBJECT-TYPE The number of parse errors on ASN.1. | 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.12 | Counter32 | read-only | current |
| bbIfNoSuchNameError OBJECT-TYPE The number of errors for name not present. | 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.13 | Counter32 | read-only | current |
| bbIfTooBigError OBJECT-TYPE The number of messages received with len > 484. | 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.14 | Counter32 | read-only | current |
| bbIfSigCntClrButton OBJECT-TYPE Writing a value of 2 resets all the counters from bbIfCntSigILMIGrpTable. | 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.15 | INTEGER {noAction(1), resetCounters(2)} | read-write | current |
| cwbIlmiMIBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.351.150.33.2 | |||
| cwbIlmiMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.351.150.33.2.1 | |||
| cwbIlmiMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.351.150.33.2.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| cwbIlmiConfGroup OBJECT-GROUP The collection of objects which are used for configuring ILMI on broad band interface ports. | 1.3.6.1.4.1.351.150.33.2.1.1 | current |
| cwbIlmiStatsGroup OBJECT-GROUP The collection of objects containing the ILMI statistics on broad band interface ports. | 1.3.6.1.4.1.351.150.33.2.1.2 | current |
| cwbIlmiCompliance MODULE-COMPLIANCE The compliance statement for objects related to SRM MIB. | 1.3.6.1.4.1.351.150.33.2.2.1 | current |