CISCO-VPDN-MGMT-MIB
- Registered at
- 1.3.6.1.4.1.9.10.24
- Last updated
- 2009-06-16 00:00
- Organization
- Cisco Systems, Inc.
- Revisions
- 2006-01-20 00:00, 2004-06-08 00:00, 2004-04-02 00:00, 2002-07-08 00:00, 2002-05-17 00:00, 2002-04-02 00:00, 2000-01-12 00:00, 1999-03-24 00:00, 1997-07-15 00:00
- Namespace
- cisco
- Source file
CISCO-VPDN-MGMT-MIB- Digest
sha256:8629c2a45ff1e9d9633cc626634c41f1b497ac8087feb37126e02b271f39378c
Description
The MIB module for VPDN. Overview of VPDN MIB MIB description This MIB is to support the Virtual Private Dialup Network (VPDN) feature of Cisco IOS. VPDN handles the forwarding of PPP links from an Internet Provider (ISP) to a Home Gateway. The VPDN MIB provides the operational information on Cisco's VPDN tunnelling implementation. The following entities are managed: 1) Global VPDN information 2) VPDN tunnel information 3) VPDN tunnel's user information 4) Failure history per user The following example configuration shows how the VPDN MIB returns VPDN information, from either CISCO A - Network Access Server (NAS) or CISCO B - Tunnel Server (TS). The User call is projected by either domain name or Dialed Number Identification Service (DNIS). The terms NAS and TS are generic terms refering to the VPDN systems. The following table shows the corresponding technology-specific terms. Network Access Server Tunnel Server ------------------------------ ------------------------- L2F Network Access Server (NAS) Home Gateway (HGW) L2TP L2TP Access Concentrator (LAC) L2TP Network Server (LNS) PPTP PPTP Access Concentrator (PAC) PPTP Network Server (PNS) (NAS) (TS) User ===== Cisco A ===== IP Network ===== Cisco B ===== Server | | +========== VPDN ==========+ 1) The VPDN global entry identifies the system wide VPDN information. 2) The VPDN tunnel table identifies the active VPDN tunnels on Cisco A and Cisco B. The table contains an entry for each active tunnel on the system. 3) The VPDN tunnel user table identifies the active users for each active tunnel on each system and provides relevant information for each user. 4) The VPDN failure history table identifies the last failure recorded per user and provides relevant information.
Contact
Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-vpdn@cisco.com
Imports
| From | Symbols |
|---|---|
| CISCO-SMI | ciscoExperiment |
| IF-MIB | InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
Imported by
1 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCO-SMI CISCO-VPDN-MGMT-MIB IANAifType-MIB IF-MIB INET-ADDRESS-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| EndpointClass TEXTUAL-CONVENTION The endpoint discriminator class supplied by the remote peer in a PPP Multilink bundle. RFC 1990 defines the following classes: none: Class 0 - Null Class. No endpoint discriminator is being used. The endpoint discriminator should contain a SnmpAdminString (SIZE (0)) value. local: Class 1 - Locally Assigned Address. This class is defined to permit a local assignment in the case where use of one of the globally unique classes is not possible. The endpoint discriminator should contain a SnmpAdminString (SIZE(1..20)) value. ipV4Address: Class 2 - Internet Protocol (IP) Address. An address in this class contains an IP host address. The endpoint discriminator should contain a InetAddressIPv4 value. macAddress: Class 3 - IEEE 802.1 Globally Assigned MAC Address. An address in this class contains an IEEE 802.1 MAC address in canonical (802.3) format. The endpoint discriminator should contain a MacAddress value. magicNumber: Class 4 - PPP Magic-Number Block. This is not an address but a block of 1 to 5 concatenated 32 bit PPP Magic-Numbers. The endpoint discriminator should contain an OCTET STRING (SIZE (4|8|12|16| 20)) value. phone: Class 5 - Public Switched Network Directory Number. An address in this class contains an octet sequence as defined by I.331 (E.164) representing an international telephone directory number suitable for use to access the endpoint via the public switched telephone network. The endpoint discriminator should contain a SnmpAdminString (SIZE(1..15)) value. | current | |||
| TunnelType TEXTUAL-CONVENTION The tunnel type. This is the tunnel protocol of a VPDN tunnel. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ciscoVpdnMgmtMIBNotifs OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.24.0 | |||
| cvpdnNotifSessionID OBJECT-TYPE This object contains the local session ID of the L2X session for which this notification has been generated. | 1.3.6.1.4.1.9.10.24.0.1 | Integer32 (0..65535) | read-only | current |
| cvpdnNotifSessionEvent OBJECT-TYPE Indicates the event that generated the L2X session notification. The events are represented as follows: up: Session has come up. down: Session has gone down. pwUp: Pseudowire associated with this session has come up. pwDown: Pseudowire associated with this session has gone down. | 1.3.6.1.4.1.9.10.24.0.2 | INTEGER {up(1), down(2), pwUp(3), pwDown(4)} | read-only | current |
| ciscoVpdnMgmtMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.24.1 | |||
| cvpdnSystemInfo OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.24.1.1 | |||
| cvpdnTunnelTotal OBJECT-TYPE The total number of VPDN tunnels that are currently active within this system. | 1.3.6.1.4.1.9.10.24.1.1.1 | Gauge32 | read-only | obsolete |
| cvpdnSessionTotal OBJECT-TYPE The total number of active users in all the active VPDN tunnels within this system. | 1.3.6.1.4.1.9.10.24.1.1.2 | Gauge32 | read-only | obsolete |
| cvpdnDeniedUsersTotal OBJECT-TYPE The total number of denied user attempts to all the active VPDN tunnels within this system. | 1.3.6.1.4.1.9.10.24.1.1.3 | Counter32 | read-only | obsolete |
| cvpdnSystemTable OBJECT-TYPE Table of information about the VPDN system for all tunnel types. | 1.3.6.1.4.1.9.10.24.1.1.4 | not-accessible | current | |
| cvpdnSystemEntry OBJECT-TYPE An entry in the table, containing information about a single type of VPDN tunnel. | 1.3.6.1.4.1.9.10.24.1.1.4.1 | not-accessible | current | |
| cvpdnSystemTunnelType OBJECT-TYPE The tunnel type. This is the tunnel protocol. | 1.3.6.1.4.1.9.10.24.1.1.4.1.1 | TunnelType | not-accessible | current |
| cvpdnSystemTunnelTotal OBJECT-TYPE The total number of VPDN tunnels that are currently active of this tunnel type. | 1.3.6.1.4.1.9.10.24.1.1.4.1.2 | Gauge32 | read-only | current |
| cvpdnSystemSessionTotal OBJECT-TYPE The total number of active sessions in all the active VPDN tunnels of this tunnel type. | 1.3.6.1.4.1.9.10.24.1.1.4.1.3 | Gauge32 | read-only | current |
| cvpdnSystemDeniedUsersTotal OBJECT-TYPE The total number of denied user attempts to all the VPDN tunnels of this tunnel type since last system re-initialization. | 1.3.6.1.4.1.9.10.24.1.1.4.1.4 | Counter32 | read-only | current |
| cvpdnSystemInitialConnReq OBJECT-TYPE The total number tunnel connection attempts on all the VPDN tunnels of this tunnel type since last system re-initialization. | 1.3.6.1.4.1.9.10.24.1.1.4.1.5 | Counter32 | read-only | current |
| cvpdnSystemSuccessConnReq OBJECT-TYPE The total number tunnel Successful connection attempts in VPDN tunnels of this tunnel type since last system re-initialization. | 1.3.6.1.4.1.9.10.24.1.1.4.1.6 | Counter32 | read-only | current |
| cvpdnSystemFailedConnReq OBJECT-TYPE The total number tunnel Failed connection attempts in VPDN tunnels of this tunnel type since last system re-initialization. | 1.3.6.1.4.1.9.10.24.1.1.4.1.7 | Counter32 | read-only | current |
| cvpdnSystemNotifSessionEnabled OBJECT-TYPE Indicates whether Layer 2 VPN session notifications are enabled. | 1.3.6.1.4.1.9.10.24.1.1.5 | TruthValue | read-only | current |
| cvpdnSystemClearSessions OBJECT-TYPE Clears all the sessions in a given tunnel type. When reading this object, the value of 'none' will always be returned. When setting these values, the following operations will be performed: none: no operation. all: clears all the sessions in all the tunnels. l2f: clears all the L2F sessions. l2tp: clears all the L2TP sessions. pptp: clears all the PPTP sessions. | 1.3.6.1.4.1.9.10.24.1.1.6 | INTEGER {none(1), all(2), l2f(3), l2tp(4), pptp(5)} | read-write | current |
| cvpdnTunnelInfo OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.24.1.2 | |||
| cvpdnTunnelTable OBJECT-TYPE Table of information about the active VPDN tunnels. | 1.3.6.1.4.1.9.10.24.1.2.1 | not-accessible | obsolete | |
| cvpdnTunnelEntry OBJECT-TYPE An entry in the table, containing information about a single active VPDN tunnel. | 1.3.6.1.4.1.9.10.24.1.2.1.1 | not-accessible | obsolete | |
| cvpdnTunnelTunnelId OBJECT-TYPE The Tunnel ID of an active VPDN tunnel. If it is the instigator of the tunnel, the ID is the HGW/LNS tunnel ID, otherwise it is the NAS/LAC tunnel ID. | 1.3.6.1.4.1.9.10.24.1.2.1.1.1 | Unsigned32 | not-accessible | obsolete |
| cvpdnTunnelRemoteTunnelId OBJECT-TYPE The remote Tunnel ID of an active VPDN tunnel. If it is the instigator of the tunnel, the ID is the NAS/LAC tunnel ID, otherwise it is the HGW/LNS tunnel ID. | 1.3.6.1.4.1.9.10.24.1.2.1.1.2 | Unsigned32 | read-only | obsolete |
| cvpdnTunnelLocalName OBJECT-TYPE The local name of an active VPDN tunnel. It will be the NAS/LAC name of the tunnel if the router serves as the NAS/LAC, or the HGW/LNS name of the tunnel if the system serves as the home gateway. Typically, the local name is the configured host name of the router. | 1.3.6.1.4.1.9.10.24.1.2.1.1.3 | DisplayString (SIZE(1..255)) | read-only | obsolete |
| cvpdnTunnelRemoteName OBJECT-TYPE The remote name of an active VPDN tunnel. It will be the home gateway name of the tunnel if the system is a NAS/LAC, or the NAS/LAC name of the tunnel if the system serves as the home gateway. | 1.3.6.1.4.1.9.10.24.1.2.1.1.4 | DisplayString (SIZE(1..255)) | read-only | obsolete |
| cvpdnTunnelRemoteEndpointName OBJECT-TYPE The remote end point name of an active VPDN tunnel. This name is either the domain name or the DNIS that this tunnel is projected with. | 1.3.6.1.4.1.9.10.24.1.2.1.1.5 | DisplayString (SIZE(1..255)) | read-only | obsolete |
| cvpdnTunnelLocalInitConnection OBJECT-TYPE This object indicates whether the tunnel was generated locally or not. | 1.3.6.1.4.1.9.10.24.1.2.1.1.6 | TruthValue | read-only | obsolete |
| cvpdnTunnelOrigCause OBJECT-TYPE The cause which originated an active VPDN tunnel. The tunnel can be projected via domain name, DNIS or a stack group (SGBP). | 1.3.6.1.4.1.9.10.24.1.2.1.1.7 | INTEGER {domain(1), dnis(2), stack(3)} | read-only | obsolete |
| cvpdnTunnelState OBJECT-TYPE The current state of an active VPDN tunnel. Each state code is explained below: unknown: The current state of the tunnel is unknown. opening: The tunnel has just been instigated and is pending for a remote end reply to complete the process. open: The tunnel is active. closing: The tunnel has just been shut down and is pending for the remote end to reply to complete the process. | 1.3.6.1.4.1.9.10.24.1.2.1.1.8 | INTEGER {unknown(1), opening(2), open(3), closing(4)} | read-only | obsolete |
| cvpdnTunnelActiveSessions OBJECT-TYPE The total number of active session currently in the tunnel. | 1.3.6.1.4.1.9.10.24.1.2.1.1.9 | Gauge32 | read-only | obsolete |
| cvpdnTunnelDeniedUsers OBJECT-TYPE A count of the accumulated total of denied users for the tunnel. | 1.3.6.1.4.1.9.10.24.1.2.1.1.10 | Counter32 | read-only | obsolete |
| cvpdnTunnelSoftshut OBJECT-TYPE A VPDN tunnel can be put into a soft shut state to prevent any new user session to be added. This object specifies whether this tunnel has been soft shut. | 1.3.6.1.4.1.9.10.24.1.2.1.1.12 | TruthValue | read-only | obsolete |
| cvpdnTunnelNetworkServiceType OBJECT-TYPE The type of network service used in the active tunnel. For now it is IP only. | 1.3.6.1.4.1.9.10.24.1.2.1.1.13 | INTEGER {ip(1)} | read-only | obsolete |
| cvpdnTunnelLocalIpAddress OBJECT-TYPE The local IP address of the tunnel. This IP address is that of the interface at the local end of the tunnel. | 1.3.6.1.4.1.9.10.24.1.2.1.1.14 | IpAddress | read-only | obsolete |
| cvpdnTunnelSourceIpAddress OBJECT-TYPE The source IP address of the tunnel. This IP address is the user configurable IP address for Stack Group Biding Protocol (SGBP) via the CLI command: vpdn source-ip | 1.3.6.1.4.1.9.10.24.1.2.1.1.15 | IpAddress | read-only | obsolete |
| cvpdnTunnelRemoteIpAddress OBJECT-TYPE The remote IP address of the tunnel. This IP address is that of the interface at the remote end of the tunnel. | 1.3.6.1.4.1.9.10.24.1.2.1.1.16 | IpAddress | read-only | obsolete |
| cvpdnTunnelAttrTable OBJECT-TYPE Table of information about the active VPDN tunnels. An entry is added to the table when a new tunnel is initiated and removed from the table when the tunnel is terminated. | 1.3.6.1.4.1.9.10.24.1.2.2 | not-accessible | current | |
| cvpdnTunnelAttrEntry OBJECT-TYPE An entry in the table, containing information about a single active VPDN tunnel. | 1.3.6.1.4.1.9.10.24.1.2.2.1 | not-accessible | current | |
| cvpdnTunnelAttrTunnelId OBJECT-TYPE The Tunnel ID of an active VPDN tunnel. If this end is the instigator of the tunnel, the ID is the TS tunnel ID, otherwise it is the NAS tunnel ID. Two distinct tunnels with the same tunnel ID may exist, but with different tunnel types. | 1.3.6.1.4.1.9.10.24.1.2.2.1.1 | Integer32 (0..65535) | not-accessible | current |
| cvpdnTunnelAttrRemoteTunnelId OBJECT-TYPE The remote Tunnel ID of an active VPDN tunnel. If this end is the instigator of the tunnel, the ID is the NAS tunnel ID, otherwise it is the TS tunnel ID. | 1.3.6.1.4.1.9.10.24.1.2.2.1.2 | Integer32 (0..65535) | read-only | current |
| cvpdnTunnelAttrLocalName OBJECT-TYPE The local name of an active VPDN tunnel. It will be the NAS name of the tunnel if the system serves as the NAS, or the TS name of the tunnel if the system serves as the tunnel server. Typically, the local name is the configured host name of the system. | 1.3.6.1.4.1.9.10.24.1.2.2.1.3 | DisplayString (SIZE(1..255)) | read-only | current |
| cvpdnTunnelAttrRemoteName OBJECT-TYPE The remote name of an active VPDN tunnel. It will be the tunnel server name of the tunnel if the system is a NAS, or the NAS name of the tunnel if the system serves as the tunnel server. | 1.3.6.1.4.1.9.10.24.1.2.2.1.4 | DisplayString (SIZE(1..255)) | read-only | current |
| cvpdnTunnelAttrRemoteEndpointName OBJECT-TYPE The remote end point name of an active VPDN tunnel. This name is either the domain name or the DNIS that this tunnel is projected with. | 1.3.6.1.4.1.9.10.24.1.2.2.1.5 | DisplayString (SIZE(1..255)) | read-only | current |
| cvpdnTunnelAttrLocalInitConnection OBJECT-TYPE This object indicates whether the tunnel was originated locally or not. If it's true, the tunnel was originated locally. | 1.3.6.1.4.1.9.10.24.1.2.2.1.6 | TruthValue | read-only | current |
| cvpdnTunnelAttrOrigCause OBJECT-TYPE The cause which originated an active VPDN tunnel. The tunnel can be projected via domain name, DNIS, stack group, or L2 Xconnect. | 1.3.6.1.4.1.9.10.24.1.2.2.1.7 | INTEGER {domain(1), dnis(2), stack(3), xconnect(4)} | read-only | current |
| cvpdnTunnelAttrState OBJECT-TYPE The current state of an active VPDN tunnel. Tunnels of type l2f will have states with the 'l2f' prefix. Tunnels of type l2tp will have states with the 'l2tp' prefix. Tunnels of type pptp will have states with the 'pptp' prefix. Each state code is explained below: unknown: The current state of the tunnel is unknown. l2fOpening: The tunnel has just been initiated and is pending for a remote end reply to complete the process. l2fOpenWait: This end received a tunnel open request from the remote end and is waiting for the tunnel to be established. l2fOpen: The tunnel is active. l2fClosing: This end received a tunnel close request. l2fCloseWait: The tunnel has just been shut down and is pending for the remote end to reply to complete the process. l2tpIdle: No tunnel is initiated yet. l2tpWaitCtlReply: The tunnel has been initiated and is pending for a remote end reply to complete the process. l2tpEstablished: The tunnel is active. l2tpShuttingDown: The tunnel is in progress of shutting down. l2tpNoSessionLeft: There is no session left in the tunnel. pptpIdle: No tunnel is initiated yet. pptpWaitConnect: The tunnel is waiting for a TCP connection. pptpWaitCtlRequest: The tunnel has been initiated and is pending for a remote end request. pptpWaitCtlReply: The tunnel has been initiated and is pending for a remote end reply. pptpEstablished: The tunnel is active. pptpWaitStopReply: The tunnel is being shut down and is pending for a remote end reply. pptpTerminal: The tunnel has been shut down. | 1.3.6.1.4.1.9.10.24.1.2.2.1.8 | INTEGER {unknown(1), l2fOpening(2), l2fOpenWait(3), l2fOpen(4), l2fClosing(5), l2fCloseWait(6), l2tpIdle(7), l2tpWaitCtlReply(8), l2tpEstablished(9), l2tpShuttingDown(10), l2tpNoSessionLeft(11), pptpIdle(12), pptpWaitConnect(13), pptpWaitCtlRequest(14), pptpWaitCtlReply(15), pptpEstablished(16), pptpWaitStopReply(17), pptpTerminal(18)} | read-only | current |
| cvpdnTunnelAttrActiveSessions OBJECT-TYPE The total number of active session currently in the tunnel. | 1.3.6.1.4.1.9.10.24.1.2.2.1.9 | Gauge32 | read-only | current |
| cvpdnTunnelAttrDeniedUsers OBJECT-TYPE A count of the accumulated total of denied users for the tunnel. | 1.3.6.1.4.1.9.10.24.1.2.2.1.10 | Counter32 | read-only | current |
| cvpdnTunnelAttrSoftshut OBJECT-TYPE A VPDN tunnel can be put into a soft shut state to prevent any new session to be added. This object specifies whether this tunnel has been soft shut. If its true, it has been soft shut. | 1.3.6.1.4.1.9.10.24.1.2.2.1.11 | TruthValue | read-only | current |
| cvpdnTunnelAttrNetworkServiceType OBJECT-TYPE The type of network service used in the active tunnel. | 1.3.6.1.4.1.9.10.24.1.2.2.1.12 | INTEGER {ip(1)} | read-only | current |
| cvpdnTunnelAttrLocalIpAddress OBJECT-TYPE The local IP address of the tunnel. This IP address is that of the interface at the local end of the tunnel. | 1.3.6.1.4.1.9.10.24.1.2.2.1.13 | IpAddress | read-only | deprecated |
| cvpdnTunnelAttrSourceIpAddress OBJECT-TYPE The source IP address of the tunnel. This IP address is the user configurable IP address for Stack Group Biding Protocol. | 1.3.6.1.4.1.9.10.24.1.2.2.1.14 | IpAddress | read-only | deprecated |
| cvpdnTunnelAttrRemoteIpAddress OBJECT-TYPE The remote IP address of the tunnel. This IP address is that of the interface at the remote end of the tunnel. | 1.3.6.1.4.1.9.10.24.1.2.2.1.15 | IpAddress | read-only | deprecated |
| cvpdnTunnelAttrLocalInetAddressType OBJECT-TYPE Indicates the type of address contained in cvpdnTunnelAttrLocalInetAddress | 1.3.6.1.4.1.9.10.24.1.2.2.1.16 | InetAddressType | read-only | current |
| cvpdnTunnelAttrLocalInetAddress OBJECT-TYPE The local IP address of the tunnel. This IP address is that of the interface at the local end of the tunnel. The type of this address is determined by the value of cvpdnTunnelAttrLocalInetAddressType. | 1.3.6.1.4.1.9.10.24.1.2.2.1.17 | InetAddress | read-only | current |
| cvpdnTunnelAttrSourceInetAddressType OBJECT-TYPE Indicates the type of address contained in cvpdnTunnelAttrSourceInetAddress | 1.3.6.1.4.1.9.10.24.1.2.2.1.18 | InetAddressType | read-only | current |
| cvpdnTunnelAttrSourceInetAddress OBJECT-TYPE The source IP address of the tunnel. This IP address is the user configurable IP address for Stack Group Biding Protocol. The type of this address is determined by the value of cvpdnTunnelAttrSourceInetAddressType. | 1.3.6.1.4.1.9.10.24.1.2.2.1.19 | InetAddress | read-only | current |
| cvpdnTunnelAttrRemoteInetAddressType OBJECT-TYPE Indicates the type of address contained in cvpdnTunnelAttrRemoteInetAddress | 1.3.6.1.4.1.9.10.24.1.2.2.1.20 | InetAddressType | read-only | current |
| cvpdnTunnelAttrRemoteInetAddress OBJECT-TYPE The remote IP address of the tunnel. This IP address is that of the interface at the remote end of the tunnel. The type of this address is determined by the value of cvpdnTunnelAttrRemoteInetAddressType. | 1.3.6.1.4.1.9.10.24.1.2.2.1.21 | InetAddress | read-only | current |
| cvpdnTunnelSessionInfo OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.24.1.3 | |||
| cvpdnTunnelSessionTable OBJECT-TYPE Table of information about individual user sessions within the active tunnels. Entry is added to the table when new user session is initiated and be removed from the table when the user session is terminated. | 1.3.6.1.4.1.9.10.24.1.3.1 | not-accessible | obsolete | |
| cvpdnTunnelSessionEntry OBJECT-TYPE An entry in the table, containing information about a single user session within the tunnel. | 1.3.6.1.4.1.9.10.24.1.3.1.1 | not-accessible | obsolete | |
| cvpdnTunnelSessionId OBJECT-TYPE The ID of an active VPDN tunnel user session. | 1.3.6.1.4.1.9.10.24.1.3.1.1.1 | Unsigned32 | not-accessible | obsolete |
| cvpdnTunnelSessionUserName OBJECT-TYPE The name of the user of the user session. | 1.3.6.1.4.1.9.10.24.1.3.1.1.2 | DisplayString (SIZE(1..255)) | read-only | obsolete |
| cvpdnTunnelSessionState OBJECT-TYPE The current state of an active user session. Each state code is explained below: unknown: The current state of the tunnel's session is unknown. opening: The user session has just been initiated through a tunnel and is pending for the remote end reply to complete the process. open: The user session is active. closing: The user session has just been closed and is pending for the remote end reply to complete the process. waitingForTunnel: The user session is in this state when the tunnel which this session is going through is still in CLOSED state. It waits for the tunnel to become OPEN before the session is allow to be fully established. | 1.3.6.1.4.1.9.10.24.1.3.1.1.3 | INTEGER {unknown(1), opening(2), open(3), closing(4), waitingForTunnel(5)} | read-only | obsolete |
| cvpdnTunnelSessionCallDuration OBJECT-TYPE This object specifies the call duration of the current active user session in value of system uptime. | 1.3.6.1.4.1.9.10.24.1.3.1.1.4 | TimeTicks | read-only | obsolete |
| cvpdnTunnelSessionPacketsOut OBJECT-TYPE The total number of output packets through this active user session. | 1.3.6.1.4.1.9.10.24.1.3.1.1.5 | Counter32 | read-only | obsolete |
| cvpdnTunnelSessionBytesOut OBJECT-TYPE The total number of output bytes through this active user session. | 1.3.6.1.4.1.9.10.24.1.3.1.1.6 | Counter32 | read-only | obsolete |
| cvpdnTunnelSessionPacketsIn OBJECT-TYPE The total number of input packets through this active user session. | 1.3.6.1.4.1.9.10.24.1.3.1.1.7 | Counter32 | read-only | obsolete |
| cvpdnTunnelSessionBytesIn OBJECT-TYPE The total number of input bytes through this active user session. | 1.3.6.1.4.1.9.10.24.1.3.1.1.8 | Counter32 | read-only | obsolete |
| cvpdnTunnelSessionDeviceType OBJECT-TYPE The type of physical devices that this user session is attached to for the local end of the tunnel. The meaning of each device type is explained below: other: Any device that has not been defined. asyncInternalModem: Modem Pool device of an access server. async: A regular asynchronous serial interface. sync: A regular synchronous serial interface. bchan: An ISDN call. xdsl: Future application with xDSL devices. cable: Future application with Cable modem devices. | 1.3.6.1.4.1.9.10.24.1.3.1.1.9 | INTEGER {other(1), asyncInternalModem(2), async(3), bchan(4), sync(5), virtualAccess(6), xdsl(7), cable(8)} | read-only | obsolete |
| cvpdnTunnelSessionDeviceCallerId OBJECT-TYPE The incoming caller identification of the user. It is the originating number that called into the device that initiates the user session. This object can be empty since not all dial device can provide caller ID information. | 1.3.6.1.4.1.9.10.24.1.3.1.1.10 | DisplayString | read-only | obsolete |
| cvpdnTunnelSessionDevicePhyId OBJECT-TYPE The device ID of the physical interface for the user session. The object is the the interface index which points to the ifTable. For virtual interface that is not in the ifTable, it will have zero value. | 1.3.6.1.4.1.9.10.24.1.3.1.1.11 | InterfaceIndexOrZero | read-only | obsolete |
| cvpdnTunnelSessionMultilink OBJECT-TYPE This object indicates whether the session is part of a multilink or not. | 1.3.6.1.4.1.9.10.24.1.3.1.1.12 | TruthValue | read-only | obsolete |
| cvpdnTunnelSessionModemSlotIndex OBJECT-TYPE The Modem Pool database slot index if it is associated with this user session. Only a session with device of type asyncInternalModem will have a valid value for this object. | 1.3.6.1.4.1.9.10.24.1.3.1.1.13 | Unsigned32 | read-only | obsolete |
| cvpdnTunnelSessionModemPortIndex OBJECT-TYPE The Modem Pool database port index if it is associated with this user session. Only a session with a device of type asyncInternalModem will have a valid value for this object. | 1.3.6.1.4.1.9.10.24.1.3.1.1.14 | Unsigned32 | read-only | obsolete |
| cvpdnTunnelSessionDS1SlotIndex OBJECT-TYPE The DS1 database slot index if it is associated with this user session. Only a session with a device of type asyncInternalModem will have a valid value for this object. | 1.3.6.1.4.1.9.10.24.1.3.1.1.15 | Unsigned32 | read-only | obsolete |
| cvpdnTunnelSessionDS1PortIndex OBJECT-TYPE The DS1 database port index if it is associated with this user session. Only a session with a device of type asyncInternalModem will have a a valid value for this object. | 1.3.6.1.4.1.9.10.24.1.3.1.1.16 | Unsigned32 | read-only | obsolete |
| cvpdnTunnelSessionDS1ChannelIndex OBJECT-TYPE The DS1 database channel index if it is associated with this user session. Only a session over a device of type asyncInternalModem will have a valid value for this object. | 1.3.6.1.4.1.9.10.24.1.3.1.1.17 | Unsigned32 | read-only | obsolete |
| cvpdnTunnelSessionModemCallStartTime OBJECT-TYPE The start time of the current modem call. Only a session with a device of type asyncInternalModem will have a valid value for this object. | 1.3.6.1.4.1.9.10.24.1.3.1.1.18 | TimeStamp | read-only | obsolete |
| cvpdnTunnelSessionModemCallStartIndex OBJECT-TYPE Arbitrary small integer to distinguish modem calls that occurred at the same time tick. Only session over device asyncInternalModem will have a valid value for this object. | 1.3.6.1.4.1.9.10.24.1.3.1.1.19 | Unsigned32 | read-only | obsolete |
| cvpdnSessionAttrTable OBJECT-TYPE Table of information about individual sessions within the active tunnels. An entry is added to the table when a new session is initiated and removed from the table when the session is terminated. | 1.3.6.1.4.1.9.10.24.1.3.2 | not-accessible | current | |
| cvpdnSessionAttrEntry OBJECT-TYPE An entry in the table, containing information about a single session within the tunnel. | 1.3.6.1.4.1.9.10.24.1.3.2.1 | not-accessible | current | |
| cvpdnSessionAttrSessionId OBJECT-TYPE The ID of an active VPDN session. | 1.3.6.1.4.1.9.10.24.1.3.2.1.1 | Integer32 (0..65535) | not-accessible | current |
| cvpdnSessionAttrUserName OBJECT-TYPE The name of the user of the session. | 1.3.6.1.4.1.9.10.24.1.3.2.1.2 | DisplayString (SIZE(1..255)) | read-only | current |
| cvpdnSessionAttrState OBJECT-TYPE The current state of a tunnel session. L2F tunnel sessions will have states with the 'l2f' prefix. L2TP tunnel sessions will have states with the 'l2tp' prefix. Each state code is explained below: unknown: The current state of the tunnel's session is unknown. l2fOpening: The session has just been initiated through a tunnel and is pending for the remote end reply to complete the process. l2fOpen: The session is active. l2fCloseWait: The session has just been closed and is pending for the remote end reply to complete the process. l2fWaitingForTunnel: The session is in this state when the tunnel which this session is going through is still in CLOSED state. It waits for the tunnel to become OPEN before the session is allowed to be fully established. l2tpIdle: No session is initiated yet. l2tpWaitingTunnel: The session is waiting for the tunnel to be established. l2tpWaitReply: The session has been initiated and is pending for the remote end reply to complete the process. l2tpWaitConnect: This end has acknowledged a connection request and is waiting for the remote end to connect. l2tpEstablished: The session is active. l2tpShuttingDown: The session is in progress of shutting down. pptpWaitVAccess: The session is waiting for the creation of a virtual access interface. pptpPacEstablished: The session is active. pptpWaitTunnel: The session is waiting for the tunnel to be established. pptpWaitOCRP: The session has been initiated and is pending for the remote end reply to complete the process. pptpPnsEstablished: The session is active. pptpWaitCallDisc: Session shutdown is in progress. | 1.3.6.1.4.1.9.10.24.1.3.2.1.3 | INTEGER {unknown(1), l2fOpening(2), l2fOpen(3), l2fCloseWait(4), l2fWaitingForTunnel(5), l2tpIdle(6), l2tpWaitingTunnel(7), l2tpWaitReply(8), l2tpWaitConnect(9), l2tpEstablished(10), l2tpShuttingDown(11), pptpWaitVAccess(12), pptpPacEstablished(13), pptpWaitTunnel(14), pptpWaitOCRP(15), pptpPnsEstablished(16), pptpWaitCallDisc(17), pptpTerminal(18)} | read-only | current |
| cvpdnSessionAttrCallDuration OBJECT-TYPE This object specifies the call duration of the current active session. | 1.3.6.1.4.1.9.10.24.1.3.2.1.4 | TimeTicks | read-only | current |
| cvpdnSessionAttrPacketsOut OBJECT-TYPE The total number of output packets through this active session. | 1.3.6.1.4.1.9.10.24.1.3.2.1.5 | Counter32 | read-only | current |
| cvpdnSessionAttrBytesOut OBJECT-TYPE The total number of output bytes through this active session. | 1.3.6.1.4.1.9.10.24.1.3.2.1.6 | Counter32 | read-only | current |
| cvpdnSessionAttrPacketsIn OBJECT-TYPE The total number of input packets through this active session. | 1.3.6.1.4.1.9.10.24.1.3.2.1.7 | Counter32 | read-only | current |
| cvpdnSessionAttrBytesIn OBJECT-TYPE The total number of input bytes through this active session. | 1.3.6.1.4.1.9.10.24.1.3.2.1.8 | Counter32 | read-only | current |
| cvpdnSessionAttrDeviceType OBJECT-TYPE The type of physical devices that this session is attached to for the local end of the tunnel. The meaning of each device type is explained below: other: Any device that has not been defined. asyncInternalModem: Modem Pool device of an access server. async: A regular asynchronous serial interface. sync: A regular synchronous serial interface. bchan: An ISDN call. xdsl: xDSL interface. cable: cable modem interface. | 1.3.6.1.4.1.9.10.24.1.3.2.1.9 | INTEGER {other(1), asyncInternalModem(2), async(3), bchan(4), sync(5), virtualAccess(6), xdsl(7), cable(8)} | read-only | current |
| cvpdnSessionAttrDeviceCallerId OBJECT-TYPE The incoming caller identification of the user. It is the originating number that called into the device that initiates the session. This object can be empty since not all dial devices can provide caller ID information. | 1.3.6.1.4.1.9.10.24.1.3.2.1.10 | DisplayString | read-only | current |
| cvpdnSessionAttrDevicePhyId OBJECT-TYPE The device ID of the physical interface for the session. The object is the the interface index which points to the ifTable. For virtual interfaces that are not in the ifTable, the value will be zero. | 1.3.6.1.4.1.9.10.24.1.3.2.1.11 | InterfaceIndexOrZero | read-only | current |
| cvpdnSessionAttrMultilink OBJECT-TYPE This object indicates whether the session is part of a multilink PPP bundle, even if there is only one link or session in the bundle. If it is multilink PPP, the value is true. | 1.3.6.1.4.1.9.10.24.1.3.2.1.12 | TruthValue | read-only | current |
| cvpdnSessionAttrModemSlotIndex OBJECT-TYPE The Modem Pool database slot index if it is associated with this session. Only a session with device of type 'asyncInternalModem' will have a valid value for this object; otherwise, it is not instantiated. | 1.3.6.1.4.1.9.10.24.1.3.2.1.13 | Unsigned32 | read-only | current |
| cvpdnSessionAttrModemPortIndex OBJECT-TYPE The Modem Pool database port index if it is associated with this session. Only a session with a device of type 'asyncInternalModem' will have a valid value for this object; otherwise, it is not instantiated. | 1.3.6.1.4.1.9.10.24.1.3.2.1.14 | Unsigned32 | read-only | current |
| cvpdnSessionAttrDS1SlotIndex OBJECT-TYPE The DS1 database slot index if it is associated with this session. Only a session with a device of type 'asyncInternalModem' will have a valid value for this object; otherwise it is not instantiated. | 1.3.6.1.4.1.9.10.24.1.3.2.1.15 | Unsigned32 | read-only | current |
| cvpdnSessionAttrDS1PortIndex OBJECT-TYPE The DS1 database port index if it is associated with this session. Only a session with a device of type 'asyncInternalModem' will have a valid value for this object; otherwise it is not instantiated. | 1.3.6.1.4.1.9.10.24.1.3.2.1.16 | Unsigned32 | read-only | current |
| cvpdnSessionAttrDS1ChannelIndex OBJECT-TYPE The DS1 database channel index if it is associated with this session. Only a session over a device of type 'asyncInternalModem' will have a valid value for this object; otherwise it is not instantiated. | 1.3.6.1.4.1.9.10.24.1.3.2.1.17 | Unsigned32 | read-only | current |
| cvpdnSessionAttrModemCallStartTime OBJECT-TYPE The start time of the current modem call. Only a session with a device of type 'asyncInternalModem' will have a valid value for this object; otherwise, it is not instantiated. | 1.3.6.1.4.1.9.10.24.1.3.2.1.18 | TimeStamp | read-only | current |
| cvpdnSessionAttrModemCallStartIndex OBJECT-TYPE Arbitrary small integer to distinguish modem calls that occurred at the same time tick. Only session over device 'asyncInternalModem' will have a valid value for this object; otherwise, it is not instantiated. | 1.3.6.1.4.1.9.10.24.1.3.2.1.19 | Unsigned32 | read-only | current |
| cvpdnSessionAttrVirtualCircuitID OBJECT-TYPE The virtual circuit ID of an active Layer 2 VPN session. | 1.3.6.1.4.1.9.10.24.1.3.2.1.20 | Unsigned32 | read-only | current |
| cvpdnSessionAttrSentPktsDropped OBJECT-TYPE The total number of dropped packets that could not be sent into this active session. | 1.3.6.1.4.1.9.10.24.1.3.2.1.21 | Counter32 | read-only | current |
| cvpdnSessionAttrRecvPktsDropped OBJECT-TYPE The total number of dropped packets that were received from this active session. | 1.3.6.1.4.1.9.10.24.1.3.2.1.22 | Counter32 | read-only | current |
| cvpdnSessionAttrMultilinkBundle OBJECT-TYPE This object specifies the name of the multilink bundle to which this session belongs. The value of this object is only valid when the value of cvpdnSessionAttrMultilink is 'true'. If the value of cvpdnSessionAttrMultilink is 'false', then the value of this object will be the empty string. | 1.3.6.1.4.1.9.10.24.1.3.2.1.23 | SnmpAdminString (SIZE(0..255)) | read-only | current |
| cvpdnSessionAttrMultilinkIfIndex OBJECT-TYPE This object specifies the ifIndex of the multilink bundle to which this session belongs. The value of this object is only valid when the value of cvpdnSessionAttrMultilink is 'true'. If the value of cvpdnSessionAttrMultilink is 'false', then the value of this object will be zero. | 1.3.6.1.4.1.9.10.24.1.3.2.1.24 | InterfaceIndexOrZero | read-only | current |
| cvpdnUserToFailHistInfo OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.24.1.4 | |||
| cvpdnUserToFailHistInfoTable OBJECT-TYPE Table of the record of failure objects which can be referenced by an user name. Only a name that has a valid item in the Cisco IOS VPDN failure history table will yield a valid entry in this table. The table has a maximum size of 50 entries. Only the newest 50 entries will be kept in the table. | 1.3.6.1.4.1.9.10.24.1.4.1 | not-accessible | current | |
| cvpdnUserToFailHistInfoEntry OBJECT-TYPE An entry in the table, containing failure history relevant to an user name. | 1.3.6.1.4.1.9.10.24.1.4.1.1 | not-accessible | current | |
| cvpdnUnameToFailHistUname OBJECT-TYPE The user name for this failure entry. | 1.3.6.1.4.1.9.10.24.1.4.1.1.1 | DisplayString (SIZE(1..255)) | not-accessible | current |
| cvpdnUnameToFailHistTunnelId OBJECT-TYPE The Tunnel ID for this failure entry. If it is the instigator of the tunnel, the ID is the TS tunnel ID, otherwise it is the NAS tunnel ID. | 1.3.6.1.4.1.9.10.24.1.4.1.1.2 | Unsigned32 | not-accessible | current |
| cvpdnUnameToFailHistUserId OBJECT-TYPE The user ID of this failure entry. | 1.3.6.1.4.1.9.10.24.1.4.1.1.3 | Unsigned32 | read-only | current |
| cvpdnUnameToFailHistLocalInitConn OBJECT-TYPE This object indicates whether the tunnel in which the failure occurred was generated locally or not. | 1.3.6.1.4.1.9.10.24.1.4.1.1.4 | TruthValue | read-only | current |
| cvpdnUnameToFailHistLocalName OBJECT-TYPE The local name of the VPDN tunnel in which the failure occurred. It will be the NAS name of the tunnel if the system serves as the NAS, or the TS name of the tunnel if the system serves as the tunnel server. The local name is the configured host name of the system. This object can be empty if the failure occurred prior to successful tunnel projection, thus no source name will be available. | 1.3.6.1.4.1.9.10.24.1.4.1.1.5 | DisplayString | read-only | current |
| cvpdnUnameToFailHistRemoteName OBJECT-TYPE The remote name of the VPDN tunnel in which the failure occurred. It will be the tunnel server name of the tunnel if the system is a NAS, or the NAS name of the tunnel if the system serves as the tunnel server. This object can be empty if the failure occurred prior to successful tunnel projection, thus no source name will be available. | 1.3.6.1.4.1.9.10.24.1.4.1.1.6 | DisplayString | read-only | current |
| cvpdnUnameToFailHistSourceIp OBJECT-TYPE The source IP address of the tunnel in which the failure occurred. This IP address is that of the interface at the instigator end of the tunnel. | 1.3.6.1.4.1.9.10.24.1.4.1.1.7 | IpAddress | read-only | deprecated |
| cvpdnUnameToFailHistDestIp OBJECT-TYPE The destination IP address of the tunnel in which the failure occurred. This IP address is that of the interface at the receiver end of the tunnel. | 1.3.6.1.4.1.9.10.24.1.4.1.1.8 | IpAddress | read-only | deprecated |
| cvpdnUnameToFailHistCount OBJECT-TYPE This object is incremented when multiple failures has been experienced by this user on this tunnel. Seeing a delta of >1 is an indication that the current failure record is the latest of a series of failures that has been recorded. | 1.3.6.1.4.1.9.10.24.1.4.1.1.9 | Counter32 | read-only | current |
| cvpdnUnameToFailHistFailTime OBJECT-TYPE This object specifies the time when the failure is occurred. | 1.3.6.1.4.1.9.10.24.1.4.1.1.10 | TimeStamp | read-only | current |
| cvpdnUnameToFailHistFailType OBJECT-TYPE The type of failure for the current failure record. It comes in a form of a an ASCII string which describes the type of failure. | 1.3.6.1.4.1.9.10.24.1.4.1.1.11 | DisplayString (SIZE(1..255)) | read-only | current |
| cvpdnUnameToFailHistFailReason OBJECT-TYPE The reason of failure for the current failure record. | 1.3.6.1.4.1.9.10.24.1.4.1.1.12 | DisplayString (SIZE(1..255)) | read-only | current |
| cvpdnUnameToFailHistSourceInetType OBJECT-TYPE Indicates the type of address contained in cvpdnUnameToFailHistSourceInetAddr. | 1.3.6.1.4.1.9.10.24.1.4.1.1.13 | InetAddressType | read-only | current |
| cvpdnUnameToFailHistSourceInetAddr OBJECT-TYPE The source IP address of the tunnel in which the failure occurred. This IP address is that of the interface at the instigator end of the tunnel. The instigator end is the peer which initiates the tunnel estalishment. The type of this address is determined by the value of cvpdnUnameToFailHistSourceInetType. | 1.3.6.1.4.1.9.10.24.1.4.1.1.14 | InetAddress | read-only | current |
| cvpdnUnameToFailHistDestInetType OBJECT-TYPE Indicates the type of address contained in cvpdnUnameToFailHistDestInetAddr. | 1.3.6.1.4.1.9.10.24.1.4.1.1.15 | InetAddressType | read-only | current |
| cvpdnUnameToFailHistDestInetAddr OBJECT-TYPE The destination IP address of the tunnel in which the failure occurred. This IP address is that of the interface at the receiver end of the tunnel. The type of this address is determined by the value of cvpdnUnameToFailHistDestInetType. | 1.3.6.1.4.1.9.10.24.1.4.1.1.16 | InetAddress | read-only | current |
| cvpdnTemplateInfo OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.24.1.5 | |||
| cvpdnTemplateTable OBJECT-TYPE Table of information about the VPDN templates. The VPDN template is a grouping mechanism that allows configuration settings to be shared among multiple VPDN groups. One such setting is a limit on the number of active sessions across all VPDN groups associated with the template. The template table allows customers to monitor template-wide information such as tracking the allocation of sessions across templates. | 1.3.6.1.4.1.9.10.24.1.5.1 | not-accessible | current | |
| cvpdnTemplateEntry OBJECT-TYPE An entry in the table, containing information about a single VPDN template. | 1.3.6.1.4.1.9.10.24.1.5.1.1 | not-accessible | current | |
| cvpdnTemplateName OBJECT-TYPE The name of the VPDN template. | 1.3.6.1.4.1.9.10.24.1.5.1.1.1 | SnmpAdminString (SIZE(1..255)) | not-accessible | current |
| cvpdnTemplateActiveSessions OBJECT-TYPE The total number of active session in all groups associated with the template. | 1.3.6.1.4.1.9.10.24.1.5.1.1.2 | Gauge32 | read-only | current |
| cvpdnMultilinkInfo OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.24.1.6 | |||
| cvpdnBundlesWithOneLink OBJECT-TYPE The total number of bundles comprised of a single link. | 1.3.6.1.4.1.9.10.24.1.6.1 | Gauge32 | read-only | current |
| cvpdnBundlesWithTwoLinks OBJECT-TYPE The total number of bundles comprised of two links. | 1.3.6.1.4.1.9.10.24.1.6.2 | Gauge32 | read-only | current |
| cvpdnBundlesWithMoreThanTwoLinks OBJECT-TYPE The total number of bundles comprised of more than two links. | 1.3.6.1.4.1.9.10.24.1.6.3 | Gauge32 | read-only | current |
| cvpdnBundleTable OBJECT-TYPE Table that describes the multilink PPP attributes of the active VPDN sessions. | 1.3.6.1.4.1.9.10.24.1.6.4 | not-accessible | current | |
| cvpdnBundleEntry OBJECT-TYPE An entry in this table represents an active multilink PPP bundle that belongs to a VPDN tunnel. | 1.3.6.1.4.1.9.10.24.1.6.4.1 | not-accessible | current | |
| cvpdnBundleName OBJECT-TYPE The name of the multilink PPP bundle associated with a VPDN tunnel. | 1.3.6.1.4.1.9.10.24.1.6.4.1.1 | SnmpAdminString (SIZE(1..64)) | not-accessible | current |
| cvpdnBundleLinkCount OBJECT-TYPE The total number of active links in a multilink PPP bundle associated with a VPDN tunnel. | 1.3.6.1.4.1.9.10.24.1.6.4.1.2 | Gauge32 | read-only | current |
| cvpdnBundleEndpointType OBJECT-TYPE The multilink PPP bundle discriminator type associated with a VPDN tunnel. The value of this object represents the type of discriminator used in cvpdnBundleEndpoint. none: No endpoint discriminator was supplied, the default value is being used. hostname: The router's hostname is being used as discriminator. string: User specified string is being used as discriminator. macAddress: A MAC address as defined by the MacAddress textual convention is being used as discriminator. ipV4Address: An IP address as defined by the InetAddressIPv4 textual convention is being used as discriminator. ipV6Address: An IP address as defined by the InetAddressIPv6 textual convention is being used as discriminator. phone: The PSTN phone number is being used as discriminator. magicNumber: A magic number is being used as discriminator. | 1.3.6.1.4.1.9.10.24.1.6.4.1.3 | INTEGER {none(1), hostname(2), string(3), macAddress(4), ipV4Address(5), ipV6Address(6), phone(7), magicNumber(8)} | read-only | deprecated |
| cvpdnBundleEndpoint OBJECT-TYPE Indicates the discriminator used in this bundle that is associated with a VPDN tunnel. | 1.3.6.1.4.1.9.10.24.1.6.4.1.4 | OCTET STRING (SIZE(0..255)) | read-only | current |
| cvpdnBundlePeerIpAddrType OBJECT-TYPE Indicates the type of address contained in cvpdnBundlePeerIpAddr. | 1.3.6.1.4.1.9.10.24.1.6.4.1.5 | InetAddressType | read-only | current |
| cvpdnBundlePeerIpAddr OBJECT-TYPE The IP address of the multilink PPP peer in a VPDN tunnel. | 1.3.6.1.4.1.9.10.24.1.6.4.1.6 | InetAddress | read-only | current |
| cvpdnBundleEndpointClass OBJECT-TYPE The multilink PPP bundle discriminator class associated with a VPDN tunnel. The value of this object represents the type of discriminator used in cvpdnBundleEndpoint. | 1.3.6.1.4.1.9.10.24.1.6.4.1.7 | EndpointClass | read-only | current |
| cvpdnBundleLastChanged OBJECT-TYPE The value of the sysUpTime object when the contents of cvpdnBundleTable last changed. | 1.3.6.1.4.1.9.10.24.1.6.5 | TimeStamp | read-only | current |
| cvpdnBundleChildTable OBJECT-TYPE A table that exposes the containment relationship between a multilink PPP bundle and a VPDN tunnel. | 1.3.6.1.4.1.9.10.24.1.6.6 | not-accessible | current | |
| cvpdnBundleChildEntry OBJECT-TYPE An entry in this table represents a session that belongs to a VPDN tunnel and to a multilink PPP bundle. | 1.3.6.1.4.1.9.10.24.1.6.6.1 | not-accessible | current | |
| cvpdnBundleChildTunnelType OBJECT-TYPE The tunnel type. This is the tunnel protocol of an active VPDN session that is associated with a multilink PPP bundle. | 1.3.6.1.4.1.9.10.24.1.6.6.1.1 | TunnelType | not-accessible | current |
| cvpdnBundleChildTunnelId OBJECT-TYPE The Tunnel ID of an active VPDN session that is associated with a multilink PPP bundle. | 1.3.6.1.4.1.9.10.24.1.6.6.1.2 | Unsigned32 | not-accessible | current |
| cvpdnBundleChildSessionId OBJECT-TYPE The ID of an active VPDN session that is associated with a multilink PPP bundle. | 1.3.6.1.4.1.9.10.24.1.6.6.1.3 | Unsigned32 | read-only | current |
| ciscoVpdnMgmtMIBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.24.3 | |||
| ciscoVpdnMgmtMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.24.3.1 | |||
| ciscoVpdnMgmtMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.24.3.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| cvpdnNotifSession NOTIFICATION-TYPE Conveys an event regarding the L2X session with the indicated session ID and Xconnect VCID. | 1.3.6.1.4.1.9.10.24.0.3 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| ciscoVpdnMgmtMIBCompliance MODULE-COMPLIANCE The compliance statement for entities which implement the Cisco VPDN Management MIB | 1.3.6.1.4.1.9.10.24.3.1.1 | obsolete |
| ciscoVpdnMgmtMIBComplianceRev1 MODULE-COMPLIANCE The compliance statement for entities which implement the Cisco VPDN Management MIB | 1.3.6.1.4.1.9.10.24.3.1.2 | obsolete |
| ciscoVpdnMgmtMIBComplianceRev2 MODULE-COMPLIANCE The compliance statement for entities which implement the Cisco VPDN Management MIB | 1.3.6.1.4.1.9.10.24.3.1.3 | deprecated |
| ciscoVpdnMgmtMIBComplianceRev3 MODULE-COMPLIANCE The compliance statement for entities which implement the Cisco VPDN Management MIB | 1.3.6.1.4.1.9.10.24.3.1.4 | deprecated |
| ciscoVpdnMgmtMIBComplianceRev4 MODULE-COMPLIANCE The compliance statement for entities which implement the Cisco VPDN Management MIB | 1.3.6.1.4.1.9.10.24.3.1.5 | deprecated |
| ciscoVpdnMgmtMIBComplianceRev5 MODULE-COMPLIANCE The compliance statement for entities which implement the Cisco VPDN Management MIB | 1.3.6.1.4.1.9.10.24.3.1.6 | current |
| cvpdnSystemInfoGroup OBJECT-GROUP A collection of objects providing VPDN system status information. | 1.3.6.1.4.1.9.10.24.3.2.1 | obsolete |
| cvpdnTunnelInfoGroup OBJECT-GROUP A collection of objects providing VPDN tunnel status information. | 1.3.6.1.4.1.9.10.24.3.2.2 | obsolete |
| cvpdnTunnelSessionInfoGroup OBJECT-GROUP A collection of objects providing session information of VPDN tunnel. | 1.3.6.1.4.1.9.10.24.3.2.3 | obsolete |
| cvpdnUserToFailHistInfoGroup OBJECT-GROUP A collection of objects providing user failure information of VPDN system. | 1.3.6.1.4.1.9.10.24.3.2.4 | deprecated |
| cvpdnSystemGroup OBJECT-GROUP A collection of objects providing VPDN system status information for multiple tunnel types. | 1.3.6.1.4.1.9.10.24.3.2.5 | current |
| cvpdnTunnelAttrGroup OBJECT-GROUP A collection of objects providing VPDN tunnel attribute information for multiple tunnel types. | 1.3.6.1.4.1.9.10.24.3.2.6 | deprecated |
| cvpdnSessionAttrGroup OBJECT-GROUP A collection of objects providing session attributed information for multiple tunnel types. | 1.3.6.1.4.1.9.10.24.3.2.7 | deprecated |
| cvpdnSessionAttrGroupRev1 OBJECT-GROUP A collection of objects providing session attributed information for multiple tunnel types. | 1.3.6.1.4.1.9.10.24.3.2.8 | current |
| cvpdnNotifEnabledGroup OBJECT-GROUP A collection of objects indicating whether Layer 2 VPN notifications are enabled. | 1.3.6.1.4.1.9.10.24.3.2.9 | current |
| cvpdnSessionNotifGroup NOTIFICATION-GROUP A collection of objects providing basic Layer 2 VPN session notifications. | 1.3.6.1.4.1.9.10.24.3.2.10 | current |
| cvpdnTemplateGroup OBJECT-GROUP A collection of objects providing VPDN template information. | 1.3.6.1.4.1.9.10.24.3.2.11 | current |
| cvpdnConfigGroup OBJECT-GROUP A collection of objects providing VPDN system configuration. | 1.3.6.1.4.1.9.10.24.3.2.12 | current |
| cvpdnMultilinkGroup OBJECT-GROUP A collection of objects providing information about PPP multilink bundles associates with a VPDN tunnel. | 1.3.6.1.4.1.9.10.24.3.2.13 | deprecated |
| cvpdnMultilinkGroupRev1 OBJECT-GROUP A collection of objects providing information about PPP multilink bundles associates with a VPDN tunnel. | 1.3.6.1.4.1.9.10.24.3.2.14 | current |
| cvpdnUserToFailHistInfoGroupRev1 OBJECT-GROUP A collection of objects providing user failure information of VPDN system. | 1.3.6.1.4.1.9.10.24.3.2.15 | current |
| cvpdnTunnelAttrGroupRev1 OBJECT-GROUP A collection of objects providing VPDN tunnel attribute information for multiple tunnel types. | 1.3.6.1.4.1.9.10.24.3.2.16 | current |