CISCO-VOICE-ATM-DIAL-CONTROL-MIB
- Registered at
- 1.3.6.1.4.1.9.10.35
- Last updated
- 2002-11-17 00:00
- Organization
- Cisco Systems, Inc.
- Revisions
- 2002-11-17 00:00, 1999-03-20 00:00
- Namespace
- cisco
- Source file
CISCO-VOICE-ATM-DIAL-CONTROL-MIB- Digest
sha256:7b12fc93a0081c47983f16f8c2e29961b6b9da2662240b4797d74805aef5923a
Description
This MIB module enhances the IETF Dial Control MIB (RFC2128) by providing ATM management information over a data network.
Contact
Cisco Systems Customer Service Postal: 170 W. Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-voice@cisco.com
Imports
| From | Symbols |
|---|---|
| CISCO-DIAL-CONTROL-MIB | cCallHistoryIndex |
| CISCO-SMI | ciscoExperiment |
| CISCO-VOICE-COMMON-DIAL-CONTROL-MIB | CvcFaxTransmitRate, CvcGUid, CvcInBandSignaling, CvcSpeechCoderRate |
| DIAL-CONTROL-MIB | callActiveIndex, callActiveSetupTime |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCO-DIAL-CONTROL-MIB CISCO-SMI CISCO-VOICE-ATM-DIAL-CONTROL-MIB CISCO-VOICE-COMMON-DIAL-CONTROL-MIB DIAL-CONTROL-MIB IANAifType-MIB IF-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| CvAtmSessionProtocol TEXTUAL-CONVENTION Represents a Session Protocol used by Voice calls between a local and remote router via the ATM backbone. other - none of the following. ciscoSwitched - cisco proprietary ATM session protocol. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ciscoVoiceAtmDialControlMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.35.1 | |||
| cvAtmCallHistory OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.35.1.1 | |||
| cvAtmCallHistoryTable OBJECT-TYPE This table is the ATM extension to the call history table of IETF Dial Control MIB. It contains ATM call leg information about specific voice over ATM call. | 1.3.6.1.4.1.9.10.35.1.1.1 | not-accessible | current | |
| cvAtmCallHistoryEntry OBJECT-TYPE The information regarding a single ATM call leg. An entry of this table is created when its associated call history entry in the IETF Dial Control MIB is created and the call history entry contains information for the call establishment to the peer on the data network backbone via a voice over ATM peer. Th the IETF Dial Control MIB is deleted. | 1.3.6.1.4.1.9.10.35.1.1.1.1 | not-accessible | current | |
| cvAtmCallHistoryConnectionId OBJECT-TYPE The global call identifier for the ATM call. | 1.3.6.1.4.1.9.10.35.1.1.1.1.1 | CvcGUid | read-only | current |
| cvAtmCallHistoryVpi OBJECT-TYPE The VPI used for this ATM connection. | 1.3.6.1.4.1.9.10.35.1.1.1.1.2 | INTEGER (0..4095) | read-only | current |
| cvAtmCallHistoryVci OBJECT-TYPE The VCI used for this ATM connection. | 1.3.6.1.4.1.9.10.35.1.1.1.1.3 | INTEGER (0..65535) | read-only | current |
| cvAtmCallHistoryLowerIfName OBJECT-TYPE The ifName of the ATM interface associated with this call. | 1.3.6.1.4.1.9.10.35.1.1.1.1.4 | DisplayString | read-only | current |
| cvAtmCallHistorySessionTarget OBJECT-TYPE The object indicates the session target of the peer that was used for the voice over ATM call. A zero length string indicates that the value is unavailable. | 1.3.6.1.4.1.9.10.35.1.1.1.1.5 | DisplayString | read-only | current |
| cvAtmCallHistorySubchannelID OBJECT-TYPE The subchannel used for this ATM connection. | 1.3.6.1.4.1.9.10.35.1.1.1.1.6 | INTEGER (0..255) | read-only | current |
| cvAtmCallHistorySessionProtocol OBJECT-TYPE Indicates the session protocol used on this call. | 1.3.6.1.4.1.9.10.35.1.1.1.1.7 | CvAtmSessionProtocol | read-only | current |
| cvAtmCallHistoryCalledNumber OBJECT-TYPE Indicates the called party number for trunk connection calls. A zero length string indicates that this data is unavailable. | 1.3.6.1.4.1.9.10.35.1.1.1.1.8 | DisplayString | read-only | current |
| cvAtmCallHistoryDtmfRelay OBJECT-TYPE Indicates if Dtmf Relay was enabled for the call. | 1.3.6.1.4.1.9.10.35.1.1.1.1.9 | TruthValue | read-only | current |
| cvAtmCallHistoryUseSeqNumbers OBJECT-TYPE Indicates if Sequence Numbers were used on the voice data packets. | 1.3.6.1.4.1.9.10.35.1.1.1.1.10 | TruthValue | read-only | current |
| cvAtmCallActive OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.35.1.2 | |||
| cvAtmCallActiveTable OBJECT-TYPE This table is the ATM extension to the active call table of IETF Dial Control MIB. It contains ATM call leg information about specific voice over ATM call. | 1.3.6.1.4.1.9.10.35.1.2.1 | not-accessible | current | |
| cvAtmCallActiveEntry OBJECT-TYPE The information regarding a single ATM call leg. An entry of this table is created when its associated call active entry in the IETF Dial Control MIB is created. The call active entry contains information for the call establishment to the peer on the data network backbone via a voice over ATM peer. The entry is deleted when its associated call active entry in the IETF Dial Control MIB is deleted. | 1.3.6.1.4.1.9.10.35.1.2.1.1 | not-accessible | current | |
| cvAtmCallActiveConnectionId OBJECT-TYPE The global call identifier for the ATM call. | 1.3.6.1.4.1.9.10.35.1.2.1.1.1 | CvcGUid | read-only | current |
| cvAtmCallActiveVpi OBJECT-TYPE The VPI used for this ATM connection. | 1.3.6.1.4.1.9.10.35.1.2.1.1.2 | INTEGER (0..4095) | read-only | current |
| cvAtmCallActiveVci OBJECT-TYPE The VCI used for this ATM connection. | 1.3.6.1.4.1.9.10.35.1.2.1.1.3 | INTEGER (0..65535) | read-only | current |
| cvAtmCallActiveLowerIfName OBJECT-TYPE The ifName of the ATM interface associated with this call. | 1.3.6.1.4.1.9.10.35.1.2.1.1.4 | DisplayString | read-only | current |
| cvAtmCallActiveSessionTarget OBJECT-TYPE The object indicates the session target of the peer that is used for the voice over ATM call. A null string indicates that the value is unavailable. | 1.3.6.1.4.1.9.10.35.1.2.1.1.5 | DisplayString | read-only | current |
| cvAtmCallActiveSubchannelID OBJECT-TYPE The subchannel used for this ATM connection. | 1.3.6.1.4.1.9.10.35.1.2.1.1.6 | INTEGER (0..255) | read-only | current |
| cvAtmCallActiveSessionProtocol OBJECT-TYPE Indicates the session protocol being used on this call. | 1.3.6.1.4.1.9.10.35.1.2.1.1.7 | CvAtmSessionProtocol | read-only | current |
| cvAtmCallActiveCalledNumber OBJECT-TYPE Indicates the called party number for trunk connection calls. A null string indicates that this data is unavailable. | 1.3.6.1.4.1.9.10.35.1.2.1.1.8 | DisplayString | read-only | current |
| cvAtmCallActiveDtmfRelay OBJECT-TYPE Indicates if Dtmf Relay is enabled for the call. | 1.3.6.1.4.1.9.10.35.1.2.1.1.9 | TruthValue | read-only | current |
| cvAtmCallActiveUseSeqNumbers OBJECT-TYPE Indicates if Sequence Numbers are used on the voice data packets. | 1.3.6.1.4.1.9.10.35.1.2.1.1.10 | TruthValue | read-only | current |
| cvAtmDialPeer OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.35.1.3 | |||
| cvAtmPeerCfgTable OBJECT-TYPE The table contains the Voice over ATM (ATM) peer specific information that is required to accept or place voice calls via the ATM backbone with the session protocol specified in cvAtmPeerCfgSessionProtocol. | 1.3.6.1.4.1.9.10.35.1.3.1 | not-accessible | current | |
| cvAtmPeerCfgEntry OBJECT-TYPE A single ATM specific Peer. One entry per ATM encapsulation. The entry is created when its associated 'voiceOverATM(152)' encapsulation ifEntry is created. This entry is deleted when its associated ifEntry is deleted. | 1.3.6.1.4.1.9.10.35.1.3.1.1 | not-accessible | current | |
| cvAtmPeerCfgSessionProtocol OBJECT-TYPE The object specifies the session protocol to be used for Internet call between local and remote router via ATM backbone. | 1.3.6.1.4.1.9.10.35.1.3.1.1.1 | CvAtmSessionProtocol | read-write | current |
| cvAtmPeerCfgInterfaceName OBJECT-TYPE The object specifies the ifName on which the call will go out. A zero length string indicates that no interface has been assigned. | 1.3.6.1.4.1.9.10.35.1.3.1.1.2 | DisplayString | read-write | current |
| cvAtmPeerCfgVpi OBJECT-TYPE The VPI used for this ATM connection. | 1.3.6.1.4.1.9.10.35.1.3.1.1.3 | INTEGER (0..4095) | read-write | current |
| cvAtmPeerCfgVci OBJECT-TYPE The VCI used for this ATM connection. | 1.3.6.1.4.1.9.10.35.1.3.1.1.4 | INTEGER (0..65535) | read-write | current |
| cvAtmPeerCfgVcName OBJECT-TYPE The VC Name used for this ATM connection. | 1.3.6.1.4.1.9.10.35.1.3.1.1.5 | DisplayString | read-write | current |
| cvAtmPeerCfgCoderRate OBJECT-TYPE This object specifies the default voice coder rate of speech for the ATM peer. | 1.3.6.1.4.1.9.10.35.1.3.1.1.6 | CvcSpeechCoderRate | read-write | current |
| cvAtmPeerCfgCodecBytes OBJECT-TYPE This object specifies the payload size for the voice packets to be transmitted during the call. | 1.3.6.1.4.1.9.10.35.1.3.1.1.7 | INTEGER (0..240) | read-write | current |
| cvAtmPeerCfgFaxRate OBJECT-TYPE This object specifies the default transmit rate of FAX for the ATM peer. If the value of this object is 'none', then the Fax relay feature is disabled; otherwise the Fax relay feature is enabled. | 1.3.6.1.4.1.9.10.35.1.3.1.1.8 | CvcFaxTransmitRate | read-write | current |
| cvAtmPeerCfgFaxBytes OBJECT-TYPE This object specifies the payload size for the fax packets to be transmitted during the call. | 1.3.6.1.4.1.9.10.35.1.3.1.1.9 | INTEGER (0..240) | read-write | current |
| cvAtmPeerCfgInBandSignaling OBJECT-TYPE This object specifies the type of in-band signaling used between the two end points of the call and is used by the router to determine how to interpret the ABCD signaling bits sent as part of the voice payload data. | 1.3.6.1.4.1.9.10.35.1.3.1.1.10 | CvcInBandSignaling | read-write | current |
| cvAtmPeerCfgVADEnable OBJECT-TYPE This object specifies whether or not VAD (Voice Activity Detection) is enabled. If the object value is 'false', then the voice data is continuously transmitted to ATM backbone. | 1.3.6.1.4.1.9.10.35.1.3.1.1.11 | TruthValue | read-write | current |
| cvAtmPeerCfgUseSeqNumbers OBJECT-TYPE This object specifies whether or not Sequence Numbers are generated on voice packets. | 1.3.6.1.4.1.9.10.35.1.3.1.1.12 | TruthValue | read-write | current |
| cvAtmPeerCfgDtmfRelay OBJECT-TYPE This object specifies whether or not Dtmf Relay is enabled. If it is then dtmf digits are transported as FRF11 Annex C packets, instead of being encoded as speech. | 1.3.6.1.4.1.9.10.35.1.3.1.1.13 | TruthValue | read-write | current |
| ciscoVoiceAtmDialControlMIBNotificationPrefix OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.35.2 | |||
| ciscoVoiceAtmDialControlMIBNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.35.2.0 | |||
| ciscoVoiceAtmDialControlMIBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.35.3 | |||
| ciscoVoiceAtmDialControlMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.35.3.1 | |||
| ciscoVoiceAtmDialControlMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.35.3.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| ciscoVoiceAtmDialControlMIBCompliance MODULE-COMPLIANCE The compliance statement for entities which implement the CISCO VOICE ATM DIAL CONTROL MIB | 1.3.6.1.4.1.9.10.35.3.1.1 | current |
| cvAtmCallHistoryGroup OBJECT-GROUP A collection of objects providing the ATM Call History entry capability. | 1.3.6.1.4.1.9.10.35.3.2.1 | current |
| cvAtmCallActiveGroup OBJECT-GROUP A collection of objects providing the ATM Call Active entry capability. | 1.3.6.1.4.1.9.10.35.3.2.2 | current |
| cvAtmPeerCfgGroup OBJECT-GROUP A collection of objects providing the ATM Dialpeer capability. These objects have been implemented as read-only. | 1.3.6.1.4.1.9.10.35.3.2.3 | current |