MIBs Depot

CISCO-VISM-PORT-MIB

Registered at
1.3.6.1.4.1.351.110.5.5.2.1
1.3.6.1.4.1.351.150.92
Last updated
2003-10-16 00:00
Organization
Cisco Systems, Inc.
Revisions
2003-10-16 00:00
Namespace
cisco
Source file
CISCO-VISM-PORT-MIB
Digest
sha256:66d2f809f81ce6f24d01fb48e84e4397ebd9ba2ce3af265ce444d77a84d8301f

Description

The MIB module containing Port information for VISM service module.

Contact

Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-wanatm@cisco.com

Imports

FromSymbols
BASIS-MIBvismPort
CISCOWAN-SMIciscoWan
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIInteger32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

1 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BASIS-MIB
CISCO-VISM-PORT-MIB
CISCOWAN-SMI
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
vismPortCnfGrp
OBJECT-IDENTITY
1.3.6.1.4.1.351.110.5.5.2.1
vismPortCnfGrpTable
OBJECT-TYPE
Port configuration table for the virtual port. Only one entry is allowed in this table.
1.3.6.1.4.1.351.110.5.5.2.1.1not-accessiblecurrent
vismPortCnfGrpEntry
OBJECT-TYPE
An entry for logical port.
1.3.6.1.4.1.351.110.5.5.2.1.1.1not-accessiblecurrent
vismPortNum
OBJECT-TYPE
This is a logical port number. If PXM1 (Processor Switch Module) is the PXM used on the shelf this object should be set to 1. For PXM1E this object should be set to 255.
1.3.6.1.4.1.351.110.5.5.2.1.1.1.1Integer32 (0..2147483647)read-onlycurrent
vismPortRowStatus
OBJECT-TYPE
The object add, delete or modify a port. 'add' - add a port, a port acn only be added if the status is in 'del'. 'del' - delete a port, once a port is deleted the status is chane to 'del'. The port can only be deleted after deleting all the connections and the resource partition. 'mod' - modify a port and change status to 'mod'.
1.3.6.1.4.1.351.110.5.5.2.1.1.1.2INTEGER {add(1), del(2), mod(3)}read-createcurrent
vismPortLineNum
OBJECT-TYPE
This represents the line number to which this port is associated. Since the network port is not associated with any line, line number 0 is returned on a GET.
1.3.6.1.4.1.351.110.5.5.2.1.1.1.3Integer32 (0..8)read-createcurrent
vismPortType
OBJECT-TYPE
The value of this object is always set to 'voIP'. It indicates that network port. The same value is used even when VISM supports VoAAL1 or VoAAL2.
1.3.6.1.4.1.351.110.5.5.2.1.1.1.4INTEGER {voIP(1), userPort(2)}read-createcurrent
vismPortDs0ConfigBitMap
OBJECT-TYPE
This respesents the bit map of DS0s which is used to create this port. Bit 0 represents DS0-1. Since this object is not applicable to the network port, value 0 is returned on a GET.
1.3.6.1.4.1.351.110.5.5.2.1.1.1.5Integer32 (0..16777215)read-createcurrent
vismPortSpeed
OBJECT-TYPE
The speed of the port in cells per second. It is used by VISM card to advertise virtual port bandwidth to the controller, SVC(Switched Virtual Circuit) and PVC(Permanent Virtual Circuit) connection admission control and aggregate traffic clipping. This object can be modified only when there is no existing resource partition on the port.
1.3.6.1.4.1.351.110.5.5.2.1.1.1.6Integer32 (1..5651320)read-createcurrent
vismPortState
OBJECT-TYPE
This object indicates the state of the port.
1.3.6.1.4.1.351.110.5.5.2.1.1.1.7INTEGER {notConfigured(1), active(2)}read-onlycurrent
ciscoVismPortMIBConformance
OBJECT-IDENTITY
1.3.6.1.4.1.351.150.92.2
ciscoVismPortMIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.351.150.92.2.1
ciscoVismPortMIBCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.351.150.92.2.2

Conformance

NameOIDStatus
ciscoVismPortGroup
OBJECT-GROUP
The collection of objects which are used to represent VISM Port information.
1.3.6.1.4.1.351.150.92.2.1.1current
ciscoVismPortCompliance
MODULE-COMPLIANCE
The compliance statement for objects related to VISM Port module.
1.3.6.1.4.1.351.150.92.2.2.1current