CISCO-VISM-CONN-STAT-MIB
- Registered at
- 1.3.6.1.4.1.351.110.5.5.3.31.3.6.1.4.1.351.150.89
- Last updated
- 2005-09-26 00:00
- Organization
- Cisco Systems, Inc.
- Revisions
- 2005-09-26 00:00, 2004-04-22 00:00, 2003-12-12 00:00, 2003-10-15 00:00
- Namespace
- cisco
- Source file
CISCO-VISM-CONN-STAT-MIB- Digest
sha256:ca84f541e2445a8c3fa7a4398e4233791c587628ce4a5066a393e00a56c49086
Description
The MIB module contain VISM channel counters information.
Contact
Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-wanatm@cisco.com
Imports
| From | Symbols |
|---|---|
| BASIS-MIB | vismChanGrp |
| CISCOWAN-SMI | ciscoWan |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
BASIS-MIB CISCO-VISM-CONN-STAT-MIB CISCOWAN-SMI SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| vismChanCntGrp OBJECT-IDENTITY | 1.3.6.1.4.1.351.110.5.5.3.3 | |||
| vismChanCntGrpTable OBJECT-TYPE vismChanCntGrpTable contains VISM channels counters. | 1.3.6.1.4.1.351.110.5.5.3.3.1 | not-accessible | current | |
| vismChanCntGrpEntry OBJECT-TYPE An entry for each voice channel. | 1.3.6.1.4.1.351.110.5.5.3.3.1.1 | not-accessible | current | |
| vismCntChanNum OBJECT-TYPE This object identifies the LCN(Logical Channel Number) on the VISM. | 1.3.6.1.4.1.351.110.5.5.3.3.1.1.1 | Integer32 (131..510) | read-only | current |
| vismCntClrButton OBJECT-TYPE This object is use to either reset counters or perform no action(do not clear counters). | 1.3.6.1.4.1.351.110.5.5.3.3.1.1.10 | INTEGER {noAction(1), resetcounters(2)} | read-only | current |
| vismChanAal2HecErrors OBJECT-TYPE This object keep count of egress AAL2(ATM Adaptation layer 2) CPS(Common Part Sub-layer) PDU(Protocol Data Unit) dropped due to HEC(Header Error Control) error. | 1.3.6.1.4.1.351.110.5.5.3.3.1.1.11 | Counter32 | read-only | current |
| vismChanAal2CrcErrors OBJECT-TYPE This object keeps track of egress AAL2 Type3 CPS PDUs dropped due to invalid CRC-10(Cyclic redundancy check) error. CRC validation is for Type 3 packets only. Type 1 packets are not subjected to CRC-10 error validation. Also this counter keeps track of CRC-10 errors for the Type 3 packets which are generated by the the datamover CPU only. It does not take into account of Type 3 packets generated by the DSP(Digital Signal Processing). | 1.3.6.1.4.1.351.110.5.5.3.3.1.1.12 | Counter32 | read-only | current |
| vismChanAal2OamLpbLostCells OBJECT-TYPE This object keeps track of the number of OAM(Operation and management) loopback cells lost. OAM loopback cells are sent on a periodic basis (1 sec) on each PVC(Permanent Virtual Circuit) to monitor the health of the PVC. | 1.3.6.1.4.1.351.110.5.5.3.3.1.1.13 | Counter32 | read-only | current |
| vismChanAal2InvOsfCells OBJECT-TYPE This object keeps track of the number AAL2 cells dropped due to invalid OSF (OffSet Field) in the egress direction. | 1.3.6.1.4.1.351.110.5.5.3.3.1.1.14 | Counter32 | read-only | current |
| vismChanAal2InvParCells OBJECT-TYPE This object keeps track of the number of AAL2 cells dropped due to invalid Parity bit field in the egress direction. | 1.3.6.1.4.1.351.110.5.5.3.3.1.1.15 | Counter32 | read-only | current |
| vismChanAal2CpsSentPkts OBJECT-TYPE This object keeps track of the number of AAL2 CPS packets sent to the network. | 1.3.6.1.4.1.351.110.5.5.3.3.1.1.16 | Counter32 | read-only | current |
| vismChanAal2CpsRcvdPkts OBJECT-TYPE This object keeps track of AAL2 CPS packets received from the network. This does not include the packets which are counted as error packets. | 1.3.6.1.4.1.351.110.5.5.3.3.1.1.17 | Counter32 | read-only | current |
| vismChanAal2CpsInvCidPkts OBJECT-TYPE This object keeps track of AAL2 CPS packets dropped in the egress direction due to invalid CID(Channel Identifier). The CID may be considered as invalid if it is out of range or not configured. | 1.3.6.1.4.1.351.110.5.5.3.3.1.1.18 | Counter32 | read-only | current |
| vismChanAal2CpsInvUuiPkts OBJECT-TYPE This object keeps track of AAL2 CPS packets dropped in the egress direction due to invalid UUI (User-to-User Information) field. | 1.3.6.1.4.1.351.110.5.5.3.3.1.1.19 | Counter32 | read-only | current |
| vismChanAal2CpsInvLenPkts OBJECT-TYPE This object keeps track of AAL2 CPS packets dropped in the egress direction due to invalid length field. | 1.3.6.1.4.1.351.110.5.5.3.3.1.1.20 | Counter32 | read-only | current |
| vismChanAal5InvCpiPdus OBJECT-TYPE This object counts the number of AAL5 PDUs dropped in the egress direction due to invalid CPI(Common Part Indicator) field in the AAL5 PDU trailer. This is applicable only to the PVCs configured as AAL5 PVCs (VoIP(Voice Over IP) PVCs or CCS(Common Channel Signaling) PVCs in the case of VoAAL2 application. | 1.3.6.1.4.1.351.110.5.5.3.3.1.1.21 | Counter32 | read-only | current |
| vismChanAal5OversizedSdusRcvdPdus OBJECT-TYPE This object counts the number AAL5 PDUs dropped due to the SDU(Service Data Unit) size bigger than the configured value. This is applicable for AAL5 PVCs only. | 1.3.6.1.4.1.351.110.5.5.3.3.1.1.22 | Counter32 | read-only | current |
| vismChanAal5InvLenPdus OBJECT-TYPE This object counts the number of AAL5 PDUs dropped due to the length violations. This is applicable to the CCS PVCs. The HDLC(High Level Data Link Control) frames should have a minimum frame size in order for the proper interpretation by the upper layer protocol. | 1.3.6.1.4.1.351.110.5.5.3.3.1.1.23 | Counter32 | read-only | current |
| vismChanAal5Crc32ErrorPdus OBJECT-TYPE This object counts the number of AAL5 PDUs dropped in the egress direction due to CRC-32 errors detected by the SAR(Segmentation and Reassembly). | 1.3.6.1.4.1.351.110.5.5.3.3.1.1.24 | Counter32 | read-only | current |
| vismChanAal5ReassemTimerExpiryPdus OBJECT-TYPE This object counts of AAL5 PDU reassembly timer expirations. The timers are maintained in the egress direction for building an AAL5 PDU from the cells. | 1.3.6.1.4.1.351.110.5.5.3.3.1.1.25 | Counter32 | read-only | current |
| vismChan24HrPeakXmtCellRate OBJECT-TYPE This object counts the peak transmit cell rate (cells per second) for the channel since midnight with reference to node time; the peak cell rate counter gets reset to 0 every 24 hours at midnight. If the node time is changed, the counter will continue to gather data until the next time midnight is reached. | 1.3.6.1.4.1.351.110.5.5.3.3.1.1.26 | Counter32 | read-only | current |
| vismChanCurrentXmtCellRate OBJECT-TYPE This object counts the current transmit cell rate (cells per second) for the channel. | 1.3.6.1.4.1.351.110.5.5.3.3.1.1.27 | Counter32 | read-only | current |
| vismChan24HrPeakRcvCellRate OBJECT-TYPE This object counts the peak receive cell rate (cells per second) for the channel since midnight with reference to node time; the peak cell rate counter gets reset to 0 every 24 hours at midnight. If the node time is changed, the counter will continue to gather data until the next time midnight is reached. | 1.3.6.1.4.1.351.110.5.5.3.3.1.1.28 | Counter32 | read-only | current |
| vismChanCurrentRcvCellRate OBJECT-TYPE This object counts the current receive cell rate (cells per second) for the channel. | 1.3.6.1.4.1.351.110.5.5.3.3.1.1.29 | Counter32 | read-only | current |
| vismChanAisSuppressCount OBJECT-TYPE This object holds the number of times that ATM network alarms were successfully suppressed and prevented from propagating onto the TDM side for this PVC. | 1.3.6.1.4.1.351.110.5.5.3.3.1.1.30 | Counter32 | read-only | current |
| vismChanXmtAisCnts OBJECT-TYPE The number of instances that an ATM AIS alarm was transmitted. | 1.3.6.1.4.1.351.110.5.5.3.3.1.1.31 | Counter32 | read-only | current |
| vismChanRcvAisCnts OBJECT-TYPE The number of instances that an ATM AIS alarm was received. | 1.3.6.1.4.1.351.110.5.5.3.3.1.1.32 | Counter32 | read-only | current |
| vismChanXmtFerfCnts OBJECT-TYPE The number of instances that an ATM FERF alarm was transmitted. | 1.3.6.1.4.1.351.110.5.5.3.3.1.1.33 | Counter32 | read-only | current |
| vismChanRcvFerfCnts OBJECT-TYPE The number of instances that an ATM FERF alarm was received. | 1.3.6.1.4.1.351.110.5.5.3.3.1.1.34 | Counter32 | read-only | current |
| vismChanAal5PduSentPkts OBJECT-TYPE This object counts the number of AAL5 PDUs transmitted to the network. This is only applicable to the PVCs configured as AAL5 PVCs, VoIP (Voice Over IP) PVCs or CCS (Common Channel Signaling) PVCs in the case of VoAAL2 applications. | 1.3.6.1.4.1.351.110.5.5.3.3.1.1.35 | Counter32 | read-only | current |
| vismChanAal5PduRcvdPkts OBJECT-TYPE This object counts the number of AAL5 PDUs received from the network. This is only applicable to the PVCs configured as AAL5 PVCs, VoIP (Voice Over IP) PVCs or CCS (Common Channel Signaling) PVCs in the case of VoAAL2 applications. | 1.3.6.1.4.1.351.110.5.5.3.3.1.1.36 | Counter32 | read-only | current |
| vismChanAisDelayLeft OBJECT-TYPE The real-time number of seconds remaining for the AIS delay timer after which the ATM alarm will be propagated to the TDM side. This object is tied to the vismChanAisDelayTime object in the CISCO-VISM-CONN-MIB. vismChanAisDelayTime will store the configurable AIS delay timer. The delay time left (vismChanAisDelayLeft) will be equal to the delay time in vismChanAisDelayTime until an AIS alarm is received at which point it starts to decrement and could go down to 0 and propagate the alarm to the TDM side. | 1.3.6.1.4.1.351.110.5.5.3.3.1.1.37 | Unsigned32 | read-only | current |
| vismChanOamLpbkTimeoutCnts OBJECT-TYPE The number of instances that OAM loopback timeout alarm has occurred since the system was last re-initialized. | 1.3.6.1.4.1.351.110.5.5.3.3.1.1.38 | Counter32 | read-only | current |
| vismChanOamLpbkTimeoutDuration OBJECT-TYPE The total duration of OAM loopback timeout alarms since the system was last re-initialized. | 1.3.6.1.4.1.351.110.5.5.3.3.1.1.39 | Unsigned32 | read-only | current |
| ciscoVismConnStatMIBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.351.150.89.2 | |||
| ciscoVismConnStatMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.351.150.89.2.1 | |||
| ciscoVismConnStatMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.351.150.89.2.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| ciscoVismConnStatGroup OBJECT-GROUP The collection of objects which are used to represent VISM channel counter group. | 1.3.6.1.4.1.351.150.89.2.1.1 | deprecated |
| ciscoVismConnStatGroup1 OBJECT-GROUP The collection of objects which are used to represent VISM channel counter group. | 1.3.6.1.4.1.351.150.89.2.1.2 | deprecated |
| ciscoVismConnStatGroup2 OBJECT-GROUP The collection of objects which are used to represent VISM channel counter group. | 1.3.6.1.4.1.351.150.89.2.1.3 | deprecated |
| ciscoVismConnStatGroup3 OBJECT-GROUP The collection of objects which are used to represent VISM channel counter group. | 1.3.6.1.4.1.351.150.89.2.1.4 | current |
| ciscoVismConnStatCompliance MODULE-COMPLIANCE The compliance statement for objects related to VISM channel counters. | 1.3.6.1.4.1.351.150.89.2.2.1 | deprecated |
| ciscoVismConnStatCompliance1 MODULE-COMPLIANCE The compliance statement for objects related to VISM channel counters. | 1.3.6.1.4.1.351.150.89.2.2.2 | deprecated |
| ciscoVismConnStatCompliance2 MODULE-COMPLIANCE The compliance statement for objects related to VISM channel counters. | 1.3.6.1.4.1.351.150.89.2.2.3 | deprecated |
| ciscoVismConnStatCompliance3 MODULE-COMPLIANCE The compliance statement for objects related to VISM channel counters. | 1.3.6.1.4.1.351.150.89.2.2.4 | current |