MIBs Depot

CISCO-TELEPRESENCE-MIB

Registered at
1.3.6.1.4.1.9.9.643
Last updated
2014-11-24 00:00
Organization
Cisco Systems, Inc.
Revisions
2014-07-18 00:00, 2012-07-17 00:00, 2012-03-23 00:00, 2011-08-23 00:00, 2010-07-23 00:00, 2010-07-13 00:00, 2009-07-12 00:00, 2008-02-13 00:00, 2007-12-11 00:00
Namespace
cisco
Source file
CISCO-TELEPRESENCE-MIB
Digest
sha256:adbebbf82c5d7fe458ef6f7a7e17f1c716b5d7439c9bbe7401b78de9ac753568

Description

The MIB module defines the managed objects for a Telepresence system. Telepresence refers to a set of technologies which allow a person to feel as if they were present, to give the appearance that they were present, or to have an effect, at a location other than their true location. A complete Telepresence system includes one or more Telepresence CODECS and peripherals such as display, camera, speaker, microphone and presentation device. Peripherals are attached directly to a Telepresence CODEC via an interface. Some peripherals may have more than one interface to transmit audio and/or video data and provide a configuration and/or control access.

Contact

Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cochan@cisco.com

Imports

FromSymbols
CISCO-SMIciscoMgmt
IF-MIBInterfaceIndexOrZero
INET-ADDRESS-MIBInetAddress, InetAddressType
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIMODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION, TimeStamp, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

CISCO-SMI
CISCO-TELEPRESENCE-MIB
IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
CtpPeripheralCableCode
TEXTUAL-CONVENTION
The textual convention identifies cable status of the attached peripheral through HDMI. plugged (1) -- Peripheral cable is plugged. loose (2) -- Peripheral cable is loose. unplugged (3) -- Peripheral cable is unplugged. unknown (4) -- Cannot detect peripheral cable status. internalError (5) -- Internal error.
current
CtpPeripheralDeviceCategoryCode
TEXTUAL-CONVENTION
The textual convention identifies the peripheral type. unknown (0) -- Unknown Device other (1) -- None of the listed device uplinkDevice (2) -- Device attached to CTS uplink port ipPhone (3) -- IP phone camera (4) -- Camera display (5) -- Display secCodec (6) -- CTS secondary codec docCamera (7) -- Document camera projector (8) -- Projector dviDevice (9) -- Device attached to DVI port presentationCodec (10) -- CTS codec process presentation -- stream auxiliaryControlUnit (11) -- Auxiliary control unit audioExpansionUnit (12) -- Audio expansion unit microphone (13) -- Microphone headset (14) -- Headset positionMic (15) -- Position microphone digitalMediaSystem (16) -- Digitial Media System auxHDMIOuputDevice (17) -- Auxiliary HDMI output device uiDevice (18) -- User Interface device for CTS auxHDMIInputDevice (19) -- HDMI input enabled device bringYourOwnDevice (20) -- Bring Your Own Device, -- like PC,Laptop,Tablet etc
current
CtpPeripheralPowerCode
TEXTUAL-CONVENTION
The textual convention identifies power status of the attached peripheral through HDMI. on (1) -- Peripheral power is on. standby (2) -- Peripheral power is in standby mode. off (3) -- Peripheral power is off. unknown (4) -- Cannot detect peripheral power status. internalError (5) -- Internal error.
current
CtpPeripheralStatusCode
TEXTUAL-CONVENTION
The textual convention identifies the peripheral status. noError (0) -- Expected peripheral device is functioning through the attached port. other (1) -- None of the listed state. cableError (2) -- Expected peripheral device has cabling issue. powerError (3) -- Expected peripheral device has power issue. mgmtSysConfigError (4) -- Expected peripheral device has communications management system configuration issue. systemError (5) -- Telepresence system error. deviceError (6) -- Expected peripheral device is attached but not fully functional. linkError (7) -- Expected peripheral device has port level link issue. commError (8) -- Expected peripheral device has port level communication issue. detectionDisabled (9) -- Status detection has been disabled.
current
CtpSystemAccessProtocol
TEXTUAL-CONVENTION
The textual convention identifies supported Telepresence user access protocol. http (1) -- Hypertext Transfer Protocol (HTTP) snmp (2) -- Simple Network Management Protocol (SNMP) ssh (3) -- Secure Shell (SSH)
current
CtpSystemResetMode
TEXTUAL-CONVENTION
This textual convention identifies the system reset mode. noRestart (1) -- No operation. restartPending (2) -- Restart a system without shutting down when there is no active call; otherwise, system will be restarted after the call is terminated. resetPending (3) -- Shut down a system and bring it back up if there is no active call; otherwise, system will be reset after the call is terminated. forceReset (4) -- Shut down a system and bring it back up no matter if there is an active call or not.
current

Objects

NameOIDSyntaxAccessStatus
ciscoTelepresenceMIBNotifs
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.643.0
ciscoTelepresenceMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.643.1
ctpObjects
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.643.1.1
ctpPeripheralErrorNotifyEnable
OBJECT-TYPE
This object controls generation of ctpPeripheralErrorNotification. When the object is 'true(1)', generation of ctpPeripheralErrorNotification is enabled. When the object is 'false(2)', generation of ctpPeripheralErrorNotification is disabled. ctpPeripheralErrorNotifyEnable object is superseded by ctpPeriStatusChangeNotifyEnable.
1.3.6.1.4.1.9.9.643.1.1.1TruthValueread-writedeprecated
ctpSysUserAuthFailNotifyEnable
OBJECT-TYPE
This object controls generation of ctpSysUserAuthFailNotification. When the object is 'true(1)', generation of ctpSysUserAuthFailNotification is enabled. When the object is 'false(2)', generation of ctpSysUserAuthFailNotification is disabled.
1.3.6.1.4.1.9.9.643.1.1.2TruthValueread-writecurrent
ctpSystemReset
OBJECT-TYPE
This object is used to reset or restart a Telepresence system.
1.3.6.1.4.1.9.9.643.1.1.3CtpSystemResetModeread-writecurrent
ctpPeriStatusChangeNotifyEnable
OBJECT-TYPE
This object controls generation of ctpPeriStatusChangeNotification. When the object is 'true(1)', generation of ctpPeriStatusChangeNotification is enabled. When the object is 'false(2)', generation of ctpPeriStatusChangeNotification is disabled.
1.3.6.1.4.1.9.9.643.1.1.4TruthValueread-writecurrent
ctpVlanId
OBJECT-TYPE
This object specifies the Telepresence system VLAN ID.
1.3.6.1.4.1.9.9.643.1.1.5Unsigned32read-writecurrent
ctpDefaultGatewayAddrType
OBJECT-TYPE
This object specifies the type of address contained in the corresponding instance of ctpDefaultGateway.
1.3.6.1.4.1.9.9.643.1.1.6InetAddressTyperead-writecurrent
ctpDefaultGateway
OBJECT-TYPE
This object specifies the Telepresence system default gateway.
1.3.6.1.4.1.9.9.643.1.1.7InetAddressread-writecurrent
ctpPeripheralStatusObjects
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.643.1.2
ctpPeripheralStatusTable
OBJECT-TYPE
The table contains system peripheral information. An entry in this table has a corresponding entry, INDEX-ed by the same value of ctpPeripheralIndex, in the table relevant to the type of interface: ctpEtherPeripheralStatusTable for Ethernet, ctpHDMIPeripheralStatusTable for HDMI or ctpDVIPeripheralStatusTable for DVI.
1.3.6.1.4.1.9.9.643.1.2.1not-accessiblecurrent
ctpPeripheralStatusEntry
OBJECT-TYPE
An entry contains information about one peripheral which is configured or detected by a Telepresence system.
1.3.6.1.4.1.9.9.643.1.2.1.1not-accessiblecurrent
ctpPeripheralIndex
OBJECT-TYPE
This object specifies a unique index for a peripheral which is attached to a Telepresence system.
1.3.6.1.4.1.9.9.643.1.2.1.1.1Unsigned32not-accessiblecurrent
ctpPeripheralDescription
OBJECT-TYPE
This object specifies a description of the attached peripheral. Peripheral description may be the peripheral type, model and/or version information or a peripheral signal description.
1.3.6.1.4.1.9.9.643.1.2.1.1.2SnmpAdminString (SIZE(0..255))read-onlycurrent
ctpPeripheralStatus
OBJECT-TYPE
This object specifies a peripheral status.
1.3.6.1.4.1.9.9.643.1.2.1.1.3CtpPeripheralStatusCoderead-onlycurrent
ctpPeripheralDeviceCategory
OBJECT-TYPE
This object specifies a peripheral category of a device.
1.3.6.1.4.1.9.9.643.1.2.1.1.4CtpPeripheralDeviceCategoryCoderead-onlycurrent
ctpPeripheralDeviceNumber
OBJECT-TYPE
This object specifies a device number for a peripheral. Device number is unique within the same peripheral device category.
1.3.6.1.4.1.9.9.643.1.2.1.1.5Unsigned32read-onlycurrent
ctpEtherPeripheralStatusTable
OBJECT-TYPE
The table contains information about all peripherals connected to the system via Ethernet port.
1.3.6.1.4.1.9.9.643.1.2.2not-accessiblecurrent
ctpEtherPeripheralStatusEntry
OBJECT-TYPE
An entry contains information about one peripheral attached to the Telepresence system via Ethernet.
1.3.6.1.4.1.9.9.643.1.2.2.1not-accessiblecurrent
ctpEtherPeripheralIndex
OBJECT-TYPE
This object specifies a unique number for a peripheral Ethernet interface. If no peripheral has more than one Ethernet interface, this object will have value '1'.
1.3.6.1.4.1.9.9.643.1.2.2.1.1Unsigned32not-accessiblecurrent
ctpEtherPeripheralIfIndex
OBJECT-TYPE
The object specifies an index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex. If this entry doesn't have corresponding ifIndex, then this value will have value '0'.
1.3.6.1.4.1.9.9.643.1.2.2.1.2InterfaceIndexOrZeroread-onlycurrent
ctpEtherPeripheralAddrType
OBJECT-TYPE
This object specifies the type of address contained in the corresponding instance of ctpEtherPeripheralAddr.
1.3.6.1.4.1.9.9.643.1.2.2.1.3InetAddressTyperead-onlycurrent
ctpEtherPeripheralAddr
OBJECT-TYPE
This object specifies the address of the attached peripheral in the format given by the corresponding instance of ctpEtherPeripheralAddrType.
1.3.6.1.4.1.9.9.643.1.2.2.1.4InetAddressread-onlycurrent
ctpEtherPeripheralStatus
OBJECT-TYPE
This object specifies attached peripheral status retrieved via Ethernet port.
1.3.6.1.4.1.9.9.643.1.2.2.1.5CtpPeripheralStatusCoderead-onlycurrent
ctpHDMIPeripheralStatusTable
OBJECT-TYPE
The table contains information about all peripherals connected to the system via HDMI.
1.3.6.1.4.1.9.9.643.1.2.3not-accessiblecurrent
ctpHDMIPeripheralStatusEntry
OBJECT-TYPE
An entry contains information about one Telepresence HDMI peripheral.
1.3.6.1.4.1.9.9.643.1.2.3.1not-accessiblecurrent
ctpHDMIPeripheralIndex
OBJECT-TYPE
This object specifies a unique number for a peripheral HDMI. If no peripheral has more than one HDMI, this object will have value '1'.
1.3.6.1.4.1.9.9.643.1.2.3.1.1Unsigned32not-accessiblecurrent
ctpHDMIPeripheralCableStatus
OBJECT-TYPE
This object specifies cable status of an attached peripheral. This object is set to 'loose' if system detects cable is 'unplugged' but power is 'on'.
1.3.6.1.4.1.9.9.643.1.2.3.1.2CtpPeripheralCableCoderead-onlycurrent
ctpHDMIPeripheralPowerStatus
OBJECT-TYPE
This object specifies power status of an attached peripheral. This object is set to 'unknown' if system detects cable is 'unplugged'.
1.3.6.1.4.1.9.9.643.1.2.3.1.3CtpPeripheralPowerCoderead-onlycurrent
ctpDVIPeripheralStatusTable
OBJECT-TYPE
The table contains information about all peripherals connected to the system via DVI.
1.3.6.1.4.1.9.9.643.1.2.4not-accessiblecurrent
ctpDVIPeripheralStatusEntry
OBJECT-TYPE
An entry contains information about one peripheral attached to the Telepresence system via DVI.
1.3.6.1.4.1.9.9.643.1.2.4.1not-accessiblecurrent
ctpDVIPeripheralIndex
OBJECT-TYPE
This object specifies a unique number for a peripheral DVI. If no peripheral has more than one DVI, this object will have value '1'. Note that some Telepresence systems have no DVI port and some Telepresence systems have only one DVI port.
1.3.6.1.4.1.9.9.643.1.2.4.1.1Unsigned32not-accessiblecurrent
ctpDVIPeripheralCableStatus
OBJECT-TYPE
This object specifies attached device cable status reported by DVI.
1.3.6.1.4.1.9.9.643.1.2.4.1.2CtpPeripheralCableCoderead-onlycurrent
ctpRS232PeripheralStatusTable
OBJECT-TYPE
The table contains information about all peripherals connected to the system via RS-232.
1.3.6.1.4.1.9.9.643.1.2.5not-accessiblecurrent
ctpRS232PeripheralStatusEntry
OBJECT-TYPE
An entry contains information about one peripheral attached to the Telepresence system via RS-232.
1.3.6.1.4.1.9.9.643.1.2.5.1not-accessiblecurrent
ctpRS232PeripheralIndex
OBJECT-TYPE
This object specifies a unique number for a peripheral RS-232. If no peripheral has more than one RS-232, this object will have value '1'. Note that some Telepresence systems have no RS-232 port.
1.3.6.1.4.1.9.9.643.1.2.5.1.1Unsigned32not-accessiblecurrent
ctpRS232PortIndex
OBJECT-TYPE
The object specifies an index value that uniquely identifies the RS-232 port to which this entry is applicable. Its value is the same as RS-232-MIB's rs232PortIndex for the port. If RS-232-MIB is not supported by the agent, then this value will have value '0'.
1.3.6.1.4.1.9.9.643.1.2.5.1.2InterfaceIndexOrZeroread-onlycurrent
ctpRS232PeripheralConnStatus
OBJECT-TYPE
This object specifies peripheral which is connected via RS232. When the object is 'connected(1)', peripheral connection via RS232 is working properly. When the object is 'unknown(2)', peripheral connection via RS232 is not working properly. It may due to device problem or connection problem.
1.3.6.1.4.1.9.9.643.1.2.5.1.3INTEGER {connected(1), unknown(2)}read-onlycurrent
ctpPeripheralAttributeTable
OBJECT-TYPE
The table contains information about attributes for the peripherals which are connected to the system. Peripheral attribute may specify peripheral's component information, for example, an entry may specify lifetime of a lamp on a presentation device.
1.3.6.1.4.1.9.9.643.1.2.6not-accessiblecurrent
ctpPeripheralAttributeEntry
OBJECT-TYPE
An entry contains information about one peripheral attribute related to the peripheral specified by ctpPeripheralIndex.
1.3.6.1.4.1.9.9.643.1.2.6.1not-accessiblecurrent
ctpPeripheralAttributeIndex
OBJECT-TYPE
This object specifies a unique number for a peripheral attribute. If no peripheral has more than one attribute, this object will have value '1'.
1.3.6.1.4.1.9.9.643.1.2.6.1.1Unsigned32not-accessiblecurrent
ctpPeripheralAttributeDescr
OBJECT-TYPE
This object specifies description of a attribute. The supported attributes are lampOperTime(1) -- indicate the lamp operating time of a peripheral lampState(2) -- indicate the lamp state powerSwitchState(3) -- indicate the power on/off state of a peripheral Note that not all peripheral contains all the supported attributes. Agent reports whatever is available.
1.3.6.1.4.1.9.9.643.1.2.6.1.2INTEGER {lampOperTime(1), lampState(2), powerSwitchState(3)}read-onlycurrent
ctpPeripheralAttributeValue
OBJECT-TYPE
This object specifies value of the attribute corresponding to ctpPeripheralAttributeDescr. The possible value of the supported attributes is listed as the following: Attribute Unit SYNTAX ----------------------------------------------------------- lampOperTime hours Unsigned32(0..4294967295) lampState INTEGER { on(1), off(2), failure(3), unknown(4) } powerSwitchState INTEGER { on(1), off(2), unknown(3) }
1.3.6.1.4.1.9.9.643.1.2.6.1.3Unsigned32read-onlycurrent
ctpUSBPeripheralStatusTable
OBJECT-TYPE
This table contains information about all the peripherals connected to the system via USB.
1.3.6.1.4.1.9.9.643.1.2.7not-accessiblecurrent
ctpUSBPeripheralStatusEntry
OBJECT-TYPE
An entry drescribes a peripheral connected to the Telepresence system through USB.
1.3.6.1.4.1.9.9.643.1.2.7.1not-accessiblecurrent
ctpUSBPeripheralIndex
OBJECT-TYPE
This object indicates an arbitrary positive, integer-value that uniquely identifies the USB peripheral.
1.3.6.1.4.1.9.9.643.1.2.7.1.1Unsigned32not-accessiblecurrent
ctpUSBPeripheralCableStatus
OBJECT-TYPE
This object indicates the status of the cable attaching the USB peripheral.
1.3.6.1.4.1.9.9.643.1.2.7.1.2CtpPeripheralCableCoderead-onlycurrent
ctpUSBPeripheralPowerStatus
OBJECT-TYPE
This object indicates the source of power for the attached USB peripheral: 'unknown' - The source of power is unknown. 'self' - The USB peripheral is externally powered. 'bus' - The USB peripheral is powered by the USB bus. 'both' - The USB peripheral can be powered by both the USB bus or self
1.3.6.1.4.1.9.9.643.1.2.7.1.3INTEGER {unknown(1), self(2), bus(3), both(4)}read-onlycurrent
ctpUSBPeripheralPortType
OBJECT-TYPE
This object indicates the type of device connected to the USB port: 'host' - no device os connected to the port 'device' - a usb device is connected to the port 'hub' - a usb hub is connected to the port
1.3.6.1.4.1.9.9.643.1.2.7.1.4INTEGER {host(1), device(2), hub(3)}read-onlycurrent
ctpUSBPeripheralPortRate
OBJECT-TYPE
This object indicates the current operational rate of the USB peripheral: 'unknown' - The USB port rate is unknown 'low' - The USB port rate is at 1.5 Mbps. 'full' - The USB port rate is at 12 Mbps. 'high' - The USB port rate is at 480 Mbps.
1.3.6.1.4.1.9.9.643.1.2.7.1.5INTEGER {low(1), full(2), high(3)}read-onlycurrent
ctp802dot11PeripheralStatusTable
OBJECT-TYPE
The table contains information about all peripherals connected to the system via 802dot11.
1.3.6.1.4.1.9.9.643.1.2.8not-accessiblecurrent
ctp802dot11PeripheralStatusEntry
OBJECT-TYPE
An entry describes one Telepresence 802dot11 peripheral.
1.3.6.1.4.1.9.9.643.1.2.8.1not-accessiblecurrent
ctp802dot11PeripheralIndex
OBJECT-TYPE
This object indicates an arbitrary positive, integer-value that uniquely identifies the IEEE 802.11 peripheral.
1.3.6.1.4.1.9.9.643.1.2.8.1.1Unsigned32not-accessiblecurrent
ctp802dot11PeripheralIfIndex
OBJECT-TYPE
This object indicates an index value that uniquely identifies the interface to which this entry is applicable. If this entry doesn't have corresponding ifIndex, then this value will have value '0'.
1.3.6.1.4.1.9.9.643.1.2.8.1.2InterfaceIndexOrZeroread-onlycurrent
ctp802dot11PeripheralAddrType
OBJECT-TYPE
This object indicates the type of address indicated by the corresponding instance of ctp802dot11PeripheralAddr.
1.3.6.1.4.1.9.9.643.1.2.8.1.3InetAddressTyperead-onlycurrent
ctp802dot11PeripheralAddr
OBJECT-TYPE
This object indicates the address of the attached peripheral in the format indicated by the corresponding instance of ctp802dot11PeripheralAddrType.
1.3.6.1.4.1.9.9.643.1.2.8.1.4InetAddressread-onlycurrent
ctp802dot11PeripheralLinkStrength
OBJECT-TYPE
This object indicates the link strength of an IEEE 802.11 link for a peripheral. A return value of 0 indicates the link is not connected. A return value between 1 - 5 indicates the strength of the link, with 1 being the weakest and 5 being the strongest.
1.3.6.1.4.1.9.9.643.1.2.8.1.5Unsigned32read-onlycurrent
ctp802dot11PeripheralLinkStatus
OBJECT-TYPE
This object indicates the link status of the attached peripheral via IEEE 802.11 link.
1.3.6.1.4.1.9.9.643.1.2.8.1.6CtpPeripheralCableCoderead-onlycurrent
ctpDPPeripheralStatusTable
OBJECT-TYPE
The table contains information about all peripherals connected to the system via DP.
1.3.6.1.4.1.9.9.643.1.2.9not-accessiblecurrent
ctpDPPeripheralStatusEntry
OBJECT-TYPE
An entry contains information about one Telepresence DP peripheral.
1.3.6.1.4.1.9.9.643.1.2.9.1not-accessiblecurrent
ctpDPPeripheralIndex
OBJECT-TYPE
This object indicates a unique number for a peripheral DP. If no peripheral has more than one DP, this object will have value '1'.
1.3.6.1.4.1.9.9.643.1.2.9.1.1Unsigned32not-accessiblecurrent
ctpDPPeripheralCableStatus
OBJECT-TYPE
This object indicates the cable status of a peripheral which is attached to the system via Display Port interface. This object returns 'loose' if system detects cable is 'unplugged' but power is 'on'.
1.3.6.1.4.1.9.9.643.1.2.9.1.2CtpPeripheralCableCoderead-onlycurrent
ctpDPPeripheralPowerStatus
OBJECT-TYPE
This object indicates the power status of a peripheral which is attached to the system via Display Port interface. This object returns 'unknown' if system detects cable is 'unplugged'.
1.3.6.1.4.1.9.9.643.1.2.9.1.3CtpPeripheralPowerCoderead-onlycurrent
ctpEventHistory
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.643.1.3
ctpPeripheralErrorHistTableSize
OBJECT-TYPE
This object specifies the maximum number of entries that the ctpPeripheralErrorHistTable can contain. When the capacity of the ctpPeripheralErrorHistTable has reached the value specified by this object, then the agent deletes the oldest entity in order to accommodate the new entry. A value of '0' prevents any history from being retained. Some agents restrict the value of this object to be less than 500.
1.3.6.1.4.1.9.9.643.1.3.1Unsigned32 (0..500)read-writecurrent
ctpPeripheralErrorHistLastIndex
OBJECT-TYPE
This object specifies the value of the ctpPeripheralErrorHistIndex object corresponding to the last entry added to the table by the agent. If the management application uses the notifications defined by this module, then it can poll this object to determine whether it has missed a notification sent by the agent.
1.3.6.1.4.1.9.9.643.1.3.2Unsigned32 (0..4294967295)read-onlycurrent
ctpPeripheralErrorHistoryTable
OBJECT-TYPE
This table contains a history of the detected peripheral status changes. After a management agent restart, when sysUpTime is reset to zero, this table records all notifications until such time as it becomes full. Thereafter, it remains full by retaining the number of most recent notifications specified in ctpPeripheralErrorHistTableSize.
1.3.6.1.4.1.9.9.643.1.3.3not-accessiblecurrent
ctpPeripheralErrorHistoryEntry
OBJECT-TYPE
An entry contains information about a Telepresence peripheral status changes.
1.3.6.1.4.1.9.9.643.1.3.3.1not-accessiblecurrent
ctpPeripheralErrorHistoryIndex
OBJECT-TYPE
A unique non-zero integer value that identifies a CtpPeripheralErrorHistoryEntry in the table. The value of this index starts from '1' and monotonically increases for each peripheral error known to the agent. If the value of this object is '4294967295', the agent will use '1' as the value of the next detected peripheral status change.
1.3.6.1.4.1.9.9.643.1.3.3.1.1Unsigned32 (1..4294967295)not-accessiblecurrent
ctpPeripheralErrorIndex
OBJECT-TYPE
The object specifies the value of ctpPeripheralIndex of a peripheral which is in error state. This object is deprecated in favor of ctpPeripheralErrorDeviceCategory and ctpPeripheralErrorDeviceNumber.
1.3.6.1.4.1.9.9.643.1.3.3.1.2Unsigned32read-onlycurrent
ctpPeripheralErrorStatus
OBJECT-TYPE
This object specifies the peripheral status after its status changed.
1.3.6.1.4.1.9.9.643.1.3.3.1.3CtpPeripheralStatusCoderead-onlycurrent
ctpPeripheralErrorTimeStamp
OBJECT-TYPE
This object specifies the value of the sysUpTime object at the time the notification was generated.
1.3.6.1.4.1.9.9.643.1.3.3.1.4TimeStampread-onlycurrent
ctpPeripheralErrorDeviceCategory
OBJECT-TYPE
The object specifies peripheral device category after its status changed.
1.3.6.1.4.1.9.9.643.1.3.3.1.5CtpPeripheralDeviceCategoryCoderead-onlycurrent
ctpPeripheralErrorDeviceNumber
OBJECT-TYPE
The object specifies peripheral device number after its status changed. Device number is unique within the same peripheral device category.
1.3.6.1.4.1.9.9.643.1.3.3.1.6Unsigned32read-onlycurrent
ctpSysUserAuthFailHistTableSize
OBJECT-TYPE
This object specifies the number of entries that the ctpSysUserAuthFailHistTable can contain. When the capacity of the ctpSysUserAuthFailHistTable has reached the value specified by this object, then the agent deletes the oldest entity in order to accommodate the new entry. A value of '0' prevents any history from being retained. Some agents restrict the value of this object to be less than 500.
1.3.6.1.4.1.9.9.643.1.3.4Unsigned32 (0..500)read-writecurrent
ctpSysUserAuthFailHistLastIndex
OBJECT-TYPE
This object specifies the value of the ctpSysUserAuthFailHistIndex object corresponding to the last entry added to the table by the agent. If the management application uses the notifications defined by this module, then it can poll this object to determine whether it has missed a notification sent by the agent.
1.3.6.1.4.1.9.9.643.1.3.5Unsigned32 (0..4294967295)read-onlycurrent
ctpSysUserAuthFailHistoryTable
OBJECT-TYPE
This table contains a history of detected user authentication failures. After a management agent restart, when sysUpTime is reset to zero, this table records all user authentication failure notifications until such time as it becomes full. Thereafter, it remains full by retaining the number of most recent notifications specified in ctpSysUserAuthFailHistTableSize.
1.3.6.1.4.1.9.9.643.1.3.6not-accessiblecurrent
ctpSysUserAuthFailHistoryEntry
OBJECT-TYPE
An entry contains information about a Telepresence system user authentication failure.
1.3.6.1.4.1.9.9.643.1.3.6.1not-accessiblecurrent
ctpSysUserAuthFailHistoryIndex
OBJECT-TYPE
A unique non-zero integer value that identifies a CtpSysUserAuthFailHistoryEntry in the table. The value of this index starts from '1' and monotonically increases for each system authentication failure event known to the agent. If the value of this object is '4294967295', the agent will use '1' as the value of the next user authentication failure event.
1.3.6.1.4.1.9.9.643.1.3.6.1.1Unsigned32 (1..4294967295)not-accessiblecurrent
ctpSysUserAuthFailSourceAddrType
OBJECT-TYPE
The object specifies the type of address contained in the corresponding instance of ctpSysUserAuthFailSourceAddr.
1.3.6.1.4.1.9.9.643.1.3.6.1.2InetAddressTyperead-onlycurrent
ctpSysUserAuthFailSourceAddr
OBJECT-TYPE
The object specifies the source address when the user authentication failure occurred, in the format given by the corresponding instance of ctpSysUserAuthFailSourceAddrType.
1.3.6.1.4.1.9.9.643.1.3.6.1.3InetAddressread-onlycurrent
ctpSysUserAuthFailSourcePort
OBJECT-TYPE
The object specifies the source TCP/UDP port number when a user authentication failure occurred.
1.3.6.1.4.1.9.9.643.1.3.6.1.4Unsigned32read-onlycurrent
ctpSysUserAuthFailUserName
OBJECT-TYPE
The object specifies the user name which was used to gain system access when authentication failure occurred.
1.3.6.1.4.1.9.9.643.1.3.6.1.5SnmpAdminString (SIZE(1..32))read-onlycurrent
ctpSysUserAuthFailAccessProtocol
OBJECT-TYPE
This object specifies the access protocol when a user authentication failure occurred.
1.3.6.1.4.1.9.9.643.1.3.6.1.6CtpSystemAccessProtocolread-onlycurrent
ctpSysUserAuthFailTimeStamp
OBJECT-TYPE
This object specifies the value of the sysUpTime object at the time the notification was generated.
1.3.6.1.4.1.9.9.643.1.3.6.1.7TimeStampread-onlycurrent
ciscoTelepresenceMIBConform
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.643.2
ciscoTelepresenceCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.643.2.1
ciscoTelepresenceMIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.643.2.2

Notifications

NameOIDStatus
ctpPeripheralErrorNotification
NOTIFICATION-TYPE
This notification is sent when a peripheral error is detected. This notification is deprecated in favor of ctpPeriStatusChangeNotification. ctpPeripheralErrorNotification object is superseded by ctpPeriStatusChangeNotification.
1.3.6.1.4.1.9.9.643.0.1deprecated
ctpSysUserAuthFailNotification
NOTIFICATION-TYPE
This notification is sent when a user authentication failure via a Telepresence supported access protocol is detected.
1.3.6.1.4.1.9.9.643.0.2current
ctpPeriStatusChangeNotification
NOTIFICATION-TYPE
This notification is sent when a peripheral status is changed.
1.3.6.1.4.1.9.9.643.0.3current

Conformance

NameOIDStatus
ciscoTelepresenceCompliance
MODULE-COMPLIANCE
The compliance statement for entities which implement the Cisco Telepresence MIB.
1.3.6.1.4.1.9.9.643.2.1.1deprecated
ciscoTelepresenceComplianceR01
MODULE-COMPLIANCE
The compliance statement for entities which implement the Cisco Telepresence MIB.
1.3.6.1.4.1.9.9.643.2.1.2deprecated
ciscoTelepresenceComplianceR02
MODULE-COMPLIANCE
The compliance statement for entities which implement the Cisco Telepresence MIB.
1.3.6.1.4.1.9.9.643.2.1.3deprecated
ciscoTelepresenceComplianceR03
MODULE-COMPLIANCE
The compliance statement for entities which implement the Cisco Telepresence MIB.
1.3.6.1.4.1.9.9.643.2.1.4deprecated
ciscoTelepresenceComplianceR04
MODULE-COMPLIANCE
The compliance statement for entities which implement the Cisco Telepresence MIB.
1.3.6.1.4.1.9.9.643.2.1.5deprecated
ciscoTelepresenceComplianceR05
MODULE-COMPLIANCE
The compliance statement for entities which implement the Cisco Telepresence MIB.
1.3.6.1.4.1.9.9.643.2.1.6current
ciscoTpConfigurationGroup
OBJECT-GROUP
A collection of objects providing the notification configuration and system reset. ciscoTpConfigurationGroup object is superseded by ciscoTpConfigurationGroupR01.
1.3.6.1.4.1.9.9.643.2.2.1deprecated
ciscoTpPeripheralStatusGroup
OBJECT-GROUP
A collection of objects providing the Telepresence peripheral information. ciscoTpPeripheralStatusGroup object is superseded by ciscoTpPeripheralStatusGroupR01.
1.3.6.1.4.1.9.9.643.2.2.2deprecated
ciscoTpEventHistoryGroup
OBJECT-GROUP
A collection of managed objects providing notification event history information. ciscoTpEventHistoryGroup object is superseded by ciscoTpEventHistoryGroupR01.
1.3.6.1.4.1.9.9.643.2.2.3deprecated
ciscoTpNotificationGroup
NOTIFICATION-GROUP
A collection of Telepresence system notifications. ciscoTpNotificationGroup object is superseded by ciscoTpNotificationGroupR01.
1.3.6.1.4.1.9.9.643.2.2.4deprecated
ciscoTpRS232PeripheralStatusGroup
OBJECT-GROUP
A collection of objects providing the information about Telepresence peripheral which is connected via RS232.
1.3.6.1.4.1.9.9.643.2.2.5current
ciscoTpPeripheralAttributeGroup
OBJECT-GROUP
A collection of managed objects providing peripheral attribute information.
1.3.6.1.4.1.9.9.643.2.2.6current
ciscoTpPeripheralStatusGroupR01
OBJECT-GROUP
A collection of objects providing the Telepresence peripheral information. ciscoTpPeripheralStatusGroupR01 object is superseded by ciscoTpPeripheralStatusGroupR02.
1.3.6.1.4.1.9.9.643.2.2.7deprecated
ciscoTpEventHistoryGroupR01
OBJECT-GROUP
A collection of managed objects providing notification event history information.
1.3.6.1.4.1.9.9.643.2.2.8current
ciscoTpNotificationGroupR01
NOTIFICATION-GROUP
A collection of Telepresence system notifications.
1.3.6.1.4.1.9.9.643.2.2.9current
ciscoTpConfigurationGroupR01
OBJECT-GROUP
A collection of objects providing the notification configuration and system reset.
1.3.6.1.4.1.9.9.643.2.2.10current
ciscoTpPeripheralStatusGroupR02
OBJECT-GROUP
A collection of objects providing the Telepresence peripheral information.
1.3.6.1.4.1.9.9.643.2.2.11current
ciscoTpConfigurationGroupR02
OBJECT-GROUP
A collection of objects providing network configurations.
1.3.6.1.4.1.9.9.643.2.2.12current
ciscoTpDPPeripheralStatusGroup
OBJECT-GROUP
A collection of objects providing the information about Telepresence peripheral which is connected via Display Port.
1.3.6.1.4.1.9.9.643.2.2.13current