CISCO-SYSTEM-EXT-MIB
- Registered at
- 1.3.6.1.4.1.9.9.305
- Last updated
- 2016-06-14 00:00
- Organization
- Cisco Systems Inc.
- Revisions
- 2016-07-19 00:00, 2016-06-07 00:00, 2015-08-19 00:00, 2007-08-06 00:00, 2006-11-29 00:00, 2006-09-25 00:00, 2005-11-09 00:00, 2005-06-14 00:00, 2004-04-19 00:00, 2003-05-02 00:00, 2003-03-02 00:00, 2002-11-19 00:00, 2002-10-04 00:00
- Namespace
- cisco
- Source file
CISCO-SYSTEM-EXT-MIB- Digest
sha256:f950d6576f65d2c9b28e9ee6cd7321fc752ebea33e35147e5ff8f40827d9ec37
Description
MIB module for monitoring High Availability, SNMP SET errors and bandwidths. This mib module also provides the information on core files that are generated in the system. GLOSSARY FIPS Federal Information Processing Standards Publication.
Contact
Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553 -NETS E-mail: cs-san@cisco.com
Imports
| From | Symbols |
|---|---|
| CISCO-SMI | ciscoMgmt |
| CISCO-TC | EntPhysicalIndexOrZero, TimeIntervalSec |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-MIB | sysName |
| SNMPv2-SMI | Gauge32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCO-SMI CISCO-SYSTEM-EXT-MIB CISCO-TC INET-ADDRESS-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| CiscoMaintModeState TEXTUAL-CONVENTION Maintenance Mode state for the system. normal (1) - normal operational state maintenance (2) - maintenance mode operational state unplannedMaint (3) - unplanned maintenance state | current | |||
| CseHaRestartReason TEXTUAL-CONVENTION Reason codes for the restart of a service. unknown (1) - ungraceful exit ungracefulExit (2) - ungraceful exit otherSignal (3) - service got some other signal sigterm (4) - received SIGTERM softwareUpgrade (5) - software upgrade configUpdate (6) - config update configRemove (7) - config removal shutdown (8) - manually shutdown aborted (9) - aborted heartbeatFailure (10) - heartbeat failure userTerminate (11) - user termination gracefulExit (12) - graceful exit failureNoCallhome (13)- service exited but it does not want a callhome message to be generated serviceTimeout (14) - service timeout | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ciscoSystemExtMIBNotifsPrefix OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.305.0 | |||
| ciscoSystemExtMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.305.1 | |||
| ciscoSysInfoGroup OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.305.1.1 | |||
| cseSysCPUUtilization OBJECT-TYPE The average utilization of CPU on the active supervisor. | 1.3.6.1.4.1.9.9.305.1.1.1 | Gauge32 (0..100) | read-only | current |
| cseSysMemoryUtilization OBJECT-TYPE The average utilization of memory on the active supervisor. | 1.3.6.1.4.1.9.9.305.1.1.2 | Gauge32 (0..100) | read-only | current |
| cseSysConfLastChange OBJECT-TYPE The local date and time when the configuration was last changed. This object will be set to zero on power cycle or on reboot of the system. Also, if the clock is changed on local system it is set to zero. | 1.3.6.1.4.1.9.9.305.1.1.3 | DateAndTime | read-only | current |
| cseSysAutoSync OBJECT-TYPE The state of the auto synchronization of images between the active and standby supervisor. Setting the value to sync when the existing value is sync, has no effect on the operation. | 1.3.6.1.4.1.9.9.305.1.1.4 | INTEGER {sync(1), noSync(2)} | read-write | current |
| cseSysAutoSyncState OBJECT-TYPE The status of the current auto synchronization process, or if no such process is in progress, then the state of the most recent one. The value 'notStarted' indicates no auto synchronization process has occurred recently. | 1.3.6.1.4.1.9.9.305.1.1.5 | INTEGER {inProgress(1), succeeded(2), failed(3), notStarted(4)} | read-only | current |
| cseWriteErase OBJECT-TYPE This object is used to initiate a write erase on the device's saved configuration file(s) from which the device loads its configuration when it restarts. If the value of this object is set to 'eraseAll', then all the saved configurations are removed. No action is taken when the this object is set to 'noOp'. When read, the value of this object is always 'noOp'. | 1.3.6.1.4.1.9.9.305.1.1.6 | INTEGER {noOp(1), eraseAll(2)} | read-write | current |
| cseSysConsolePortStatus OBJECT-TYPE This object describes the status of the console port on this device. The status 'connected' means that there is a cable attached to the console port. The status 'notConnected' means that there is no connection out of the console port. | 1.3.6.1.4.1.9.9.305.1.1.7 | INTEGER {connected(1), notConnected(2)} | read-only | current |
| cseSysTelnetServiceActivation OBJECT-TYPE Enables or disables the Telnet service on the device. In other words, it enables or disables the telneting to the device. | 1.3.6.1.4.1.9.9.305.1.1.8 | TruthValue | read-write | current |
| cseSysFIPSModeActivation OBJECT-TYPE The object to enable/disable FIPS mode on the device. FIPS 140-2 is a set of security requirements for cryptographic modules and it details the U.S. Government requirements for cryptographic modules. A module will comprise both hardware and software, eg a datacenter switching or routing module. The module is said to be in FIPS enabled mode when a request is recieved to enable the FIPS mode and a set of self-tests are successfully run in response to the request. If the self-tests fail, then an appropriate error is returned. | 1.3.6.1.4.1.9.9.305.1.1.9 | TruthValue | read-write | current |
| cseSysUpTime OBJECT-TYPE The time (in seconds) since the entire system was last re-initialized as a result of reload. The initialization being system loaded and running with a system image software on the first active supervisor (SUP). In High Availibility (HA) capable system / System that provides Supervisor module redundancy, this uptime indicates time elapsed since the first active SUP was booted. This will not change even if the active SUP goes down and stand-by takes over as active. | 1.3.6.1.4.1.9.9.305.1.1.10 | TimeIntervalSec | read-only | current |
| ciscoSysErrorGroup OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.305.1.2 | |||
| cseSnmpErrorTable OBJECT-TYPE A table containing information about the errors which have recently caused the generation of a SNMP Response PDU with a non-zero value in its error-status field for SNMP Set Response PDU. This table serves as an extension to the SNMP's error status when a SNMP Set request fails. SNMP returns only a pre-defined set of standard error codes which does not convey the specific cause for an error. Typically, there is an incumbent and sizable burden on the configuration application to determine if the configuration request failure is the result of a resource issue, a security issue, or an application error (like an object depending on some other objects). So from a user perspective, it is important that a specific error be made known. Ideally, when a 'badValue' error occurs for a given set request, an application can query the command responder for more details on the error. This table provides a framework for the command responders to provide more information on the SET errors. It is up to the implementation to create entries in this table for either only certain SNMP errors or all of the SNMP errors. Note that only most recent incarnation of an entry is kept in this table. | 1.3.6.1.4.1.9.9.305.1.2.1 | not-accessible | current | |
| cseSnmpErrorEntry OBJECT-TYPE An entry (conceptual row) in the cseSnmpErrorTable, containing information about an error which has recently caused a SNMP SetRequest to fail. An entry is created by the agent on the occurrence of an error, and is deleted approximately 5 minutes later. The reasons for this are : - to prevent old entries clogging the table. - optimal utilization of the resources like memory. | 1.3.6.1.4.1.9.9.305.1.2.1.1 | not-accessible | current | |
| cseSnmpErrorAddressType OBJECT-TYPE The type of address from which the error-ed SetRequest originated. | 1.3.6.1.4.1.9.9.305.1.2.1.1.1 | InetAddressType | not-accessible | current |
| cseSnmpErrorAddress OBJECT-TYPE The address from which the error-ed SetRequest originated. | 1.3.6.1.4.1.9.9.305.1.2.1.1.2 | InetAddress | not-accessible | current |
| cseSnmpErrorRequestId OBJECT-TYPE The request-id of the error-ed SetRequest. | 1.3.6.1.4.1.9.9.305.1.2.1.1.3 | Unsigned32 | not-accessible | current |
| cseSnmpErrorCode OBJECT-TYPE The code for the Mib object specific error which caused a SetRequest to fail. This error code is platform-specific and for debugging purposes only. For information on this code, the corresponding instance of cseSnmpErrorDescription must be used. This code is not the same as the value contained in the error-status field of SNMP Response PDU. | 1.3.6.1.4.1.9.9.305.1.2.1.1.4 | Unsigned32 | read-only | current |
| cseSnmpErrorDescription OBJECT-TYPE The error description for the error happened for the SetRequest. | 1.3.6.1.4.1.9.9.305.1.2.1.1.5 | SnmpAdminString | read-only | current |
| ciscoHaGroup OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.305.1.3 | |||
| cseHaRestartReason OBJECT-TYPE The reason for most recent restart of a service on the 'active' supervisor. | 1.3.6.1.4.1.9.9.305.1.3.2 | CseHaRestartReason | accessible-for-notify | current |
| cseHaRestartStateless OBJECT-TYPE Tells if the most recent restart of a service on the 'active' supervisor was 'stateless' or not. A 'stateless' restart of a service is where no runtime information is preserved while restarting the service. | 1.3.6.1.4.1.9.9.305.1.3.3 | TruthValue | accessible-for-notify | current |
| cseHaRestartService OBJECT-TYPE Name of the service (or process) that was restarted on the 'active' supervisor. | 1.3.6.1.4.1.9.9.305.1.3.4 | SnmpAdminString (SIZE(0..255)) | accessible-for-notify | current |
| cseHaNotification OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.305.1.3.5 | |||
| cseHaNotificationPrefix OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.305.1.3.5.0 | |||
| cseHaShutDownReason OBJECT-TYPE The description of the reason as to why the system is going to go down. | 1.3.6.1.4.1.9.9.305.1.3.6 | SnmpAdminString (SIZE(0..255)) | accessible-for-notify | current |
| ciscoSwFailureGroup OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.305.1.4 | |||
| cseSwCorePath OBJECT-TYPE Provides the path where the software cores are stored on the system. The management application can use this path to copy the cores from the system using CISCO-FLASH-MIB. | 1.3.6.1.4.1.9.9.305.1.4.1 | SnmpAdminString (SIZE(0..255)) | read-only | current |
| cseSwCoresTable OBJECT-TYPE A table containing information about the system cores that have been generated as an effect of some system failures. | 1.3.6.1.4.1.9.9.305.1.4.2 | not-accessible | current | |
| cseSwCoresEntry OBJECT-TYPE An entry (conceptual row) in the cseSwCoresTable, containing information about cores that have been generated. | 1.3.6.1.4.1.9.9.305.1.4.2.1 | not-accessible | current | |
| cseSwCoresModule OBJECT-TYPE The physical module on which the process crashed. | 1.3.6.1.4.1.9.9.305.1.4.2.1.1 | EntPhysicalIndexOrZero | not-accessible | current |
| cseSwCoresProcName OBJECT-TYPE The name of the process that crashed and generated core. | 1.3.6.1.4.1.9.9.305.1.4.2.1.2 | SnmpAdminString (SIZE(1..64)) | not-accessible | current |
| cseSwCoresInstance OBJECT-TYPE The instance of the core for a process identified by cseSwCoresProcName and on the module identified by cseSwCoresModule. To uniquely identify a core, the module number and process name are not sufficient as there could be multiple cores for the same module number and process name. | 1.3.6.1.4.1.9.9.305.1.4.2.1.3 | Unsigned32 | not-accessible | current |
| cseSwCoresPID OBJECT-TYPE The process identifier of the process that dumped the core. | 1.3.6.1.4.1.9.9.305.1.4.2.1.4 | Unsigned32 | read-only | current |
| cseSwCoresTimeCreated OBJECT-TYPE The time at which the core was created. | 1.3.6.1.4.1.9.9.305.1.4.2.1.5 | DateAndTime | read-only | current |
| cseSwCoresSlotNum OBJECT-TYPE The slot number corresponding to the cseSwCoresModule in this chassis. | 1.3.6.1.4.1.9.9.305.1.4.2.1.6 | Unsigned32 | read-only | current |
| cseSwCoresFileName OBJECT-TYPE This object contains the core file-name(including the path, relative to the value in the cseSwCorePath object). If the cseSwCorePath contains zero length octet string, then this object will contain the filename with absolute path. If this object contains zero length octet string, then the core file is available in path identified in cseSwCorePath. | 1.3.6.1.4.1.9.9.305.1.4.2.1.7 | SnmpAdminString | read-only | current |
| cseFailNotification OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.305.1.4.3 | |||
| cseFailNotificationPrefix OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.305.1.4.3.0 | |||
| ciscoSwFailureNotifControl OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.305.1.5 | |||
| ciscoSwFailureNotifEnable OBJECT-TYPE This object is used for administratively enabling/disabling the cseFailSwCoreNotify or cseFailSwCoreNotifyExtended notifications. | 1.3.6.1.4.1.9.9.305.1.5.1 | TruthValue | read-write | current |
| ciscoSystemSwitchingModeGroup OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.305.1.6 | |||
| ciscoSystemSwitchingModeAdmin OBJECT-TYPE Object to specify system's switching mode. 'other' - any other state not covered by below enumerations 'notApplicable' - switching mode configuration is not applicable for this system 'nexus3000' - system switching mode is configured as Nexus 3000 'nexus9000' - system switching mode is configured as Nexus 9000. | 1.3.6.1.4.1.9.9.305.1.6.1 | INTEGER {other(1), notApplicable(2), nexus3000(3), nexus9000(4)} | read-write | current |
| ciscoSystemSwitchingModeOper OBJECT-TYPE Object indicate system's operational switching mode. 'other' - any other state not covered by below enumerations 'notApplicable' - switching mode configuration is not applicable for this system 'nexus3000' - system is opeerating in Nexus 3000 mode 'nexus9000' - system is opeerating in Nexus 9000 mode. | 1.3.6.1.4.1.9.9.305.1.6.2 | INTEGER {other(1), notApplicable(2), nexus3000(3), nexus9000(4)} | read-only | current |
| ciscoSystemMaintModeGroup OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.305.1.7 | |||
| cseMaintModeState OBJECT-TYPE The maintenance mode operational state for the system. | 1.3.6.1.4.1.9.9.305.1.7.1 | CiscoMaintModeState | read-only | current |
| cseMaintModeNotification OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.305.1.7.2 | |||
| cseMaintModeNotificationPrefix OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.305.1.7.2.0 | |||
| ciscoSystemMaintModeNotifControl OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.305.1.8 | |||
| ciscoSystemNormalModeNotifEnable OBJECT-TYPE This object is used for administratively enabling/disabling the cseNormalModeChangeNotify. | 1.3.6.1.4.1.9.9.305.1.8.1 | TruthValue | read-write | current |
| ciscoSystemMaintModeNotifEnable OBJECT-TYPE This object is used for administratively enabling/disabling the cseMaintModeChangeNotify. | 1.3.6.1.4.1.9.9.305.1.8.2 | TruthValue | read-write | current |
| ciscoSystemReloadGroup OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.305.1.9 | |||
| cseSystemReloadPending OBJECT-TYPE This object is used to indicate if a system reload is needed to make feature configuration change effective. The object returns 'true' if a system reload is required; it returns 'false' if no system reload is required. | 1.3.6.1.4.1.9.9.305.1.9.1 | TruthValue | read-only | current |
| ciscoSystemExtMIBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.305.2 | |||
| ciscoSystemExtMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.305.2.1 | |||
| ciscoSystemExtMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.305.2.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| cseHaRestartNotify NOTIFICATION-TYPE A service restart notification is generated whenever a service (or a process) on the 'active' supervisor is restarted. | 1.3.6.1.4.1.9.9.305.1.3.5.0.1 | current |
| cseShutDownNotify NOTIFICATION-TYPE A system shutdown notification is generated whenever a system is going to shut down. The cseHaShutDownReason, describes the reason as to why the system is going to go down. | 1.3.6.1.4.1.9.9.305.1.3.5.0.2 | current |
| cseFailSwCoreNotify NOTIFICATION-TYPE A notification is generated whenever a software crash occurs and a core file is generated. | 1.3.6.1.4.1.9.9.305.1.4.3.0.1 | current |
| cseFailSwCoreNotifyExtended NOTIFICATION-TYPE A notification is generated whenever a software crash occurs and a core file is generated. | 1.3.6.1.4.1.9.9.305.1.4.3.0.2 | current |
| cseNormalModeChangeNotify NOTIFICATION-TYPE A normal mode state change is generated when the system is changed from maintenance mode to normal mode. | 1.3.6.1.4.1.9.9.305.1.7.2.0.1 | current |
| cseMaintModeChangeNotify NOTIFICATION-TYPE A maintenance mode state change is generated when the system is changed from normal mode to maintenance mode. | 1.3.6.1.4.1.9.9.305.1.7.2.0.2 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| ciscoSystemExtMIBCompliance MODULE-COMPLIANCE The compliance statement for entities which implement the CISCO-SYTEM-EXT-MIB. | 1.3.6.1.4.1.9.9.305.2.1.1 | deprecated |
| ciscoSystemExtMIBComplianceRev1 MODULE-COMPLIANCE The compliance statement for entities which implement the CISCO-SYTEM-EXT-MIB. | 1.3.6.1.4.1.9.9.305.2.1.2 | deprecated |
| ciscoSystemExtMIBComplianceRev2 MODULE-COMPLIANCE The compliance statement for entities which implement the CISCO-SYTEM-EXT-MIB. | 1.3.6.1.4.1.9.9.305.2.1.3 | deprecated |
| ciscoSystemExtMIBComplianceRev3 MODULE-COMPLIANCE The compliance statement for entities which implement the CISCO-SYTEM-EXT-MIB. | 1.3.6.1.4.1.9.9.305.2.1.4 | deprecated |
| ciscoSystemExtMIBComplianceRev4 MODULE-COMPLIANCE The compliance statement for entities which implement the CISCO-SYTEM-EXT-MIB. | 1.3.6.1.4.1.9.9.305.2.1.5 | deprecated |
| ciscoSystemExtMIBComplianceRev5 MODULE-COMPLIANCE The compliance statement for entities which implement the CISCO-SYTEM-EXT-MIB. | 1.3.6.1.4.1.9.9.305.2.1.6 | deprecated |
| ciscoSystemExtMIBComplianceRev6 MODULE-COMPLIANCE The compliance statement for entities which implement the CISCO-SYTEM-EXT-MIB. | 1.3.6.1.4.1.9.9.305.2.1.7 | deprecated |
| ciscoSystemExtMIBComplianceRev7 MODULE-COMPLIANCE The compliance statement for entities which implement the CISCO-SYTEM-EXT-MIB. | 1.3.6.1.4.1.9.9.305.2.1.8 | deprecated |
| ciscoSystemExtMIBComplianceRev8 MODULE-COMPLIANCE The compliance statement for entities which implement the CISCO-SYTEM-EXT-MIB. | 1.3.6.1.4.1.9.9.305.2.1.9 | deprecated |
| ciscoSystemExtMIBComplianceRev9 MODULE-COMPLIANCE The compliance statement for entities which implement the CISCO-SYTEM-EXT-MIB. | 1.3.6.1.4.1.9.9.305.2.1.11 | deprecated |
| ciscoSystemExtMIBComplianceRev10 MODULE-COMPLIANCE The compliance statement for entities which implement the CISCO-SYTEM-EXT-MIB. | 1.3.6.1.4.1.9.9.305.2.1.12 | current |
| ciscoSystemExtInfoGroup OBJECT-GROUP A collection of objects for system information. ciscoSystemExtInfoGroup object is superseded by ciscoSystemExtInfoGroupRev1. | 1.3.6.1.4.1.9.9.305.2.2.1 | deprecated |
| ciscoSystemExtErrorGroup OBJECT-GROUP A collection of objects for logging SNMP set error. | 1.3.6.1.4.1.9.9.305.2.2.2 | current |
| ciscoSystemExtHaGroup OBJECT-GROUP A collection of objects for High Availability. | 1.3.6.1.4.1.9.9.305.2.2.3 | current |
| ciscoSystemExtNotificationGroup NOTIFICATION-GROUP A collection of notifications for the High Availability. | 1.3.6.1.4.1.9.9.305.2.2.4 | current |
| ciscoSystemExtInfoGroupRev1 OBJECT-GROUP A collection of objects for system information. ciscoSystemExtInfoGroupRev1 object is superseded by ciscoSystemExtInfoGroupRev3. | 1.3.6.1.4.1.9.9.305.2.2.5 | deprecated |
| ciscoSystemExtInfoGroupOptional OBJECT-GROUP A collection of objects for system information which are optional. | 1.3.6.1.4.1.9.9.305.2.2.6 | current |
| ciscoSystemExtSwFailureGroup OBJECT-GROUP A collection of objects for system software failure information which are optional. | 1.3.6.1.4.1.9.9.305.2.2.7 | current |
| ciscoSystemExtInfoGroupRev2 OBJECT-GROUP A collection of objects for system information. | 1.3.6.1.4.1.9.9.305.2.2.8 | current |
| ciscoSystemExtSwFailureGroup2 OBJECT-GROUP A collection of objects for system software failure information which are optional. | 1.3.6.1.4.1.9.9.305.2.2.9 | current |
| ciscoSystemExtNotificationGroupSup1 NOTIFICATION-GROUP A collection of notifications for the system MIB. | 1.3.6.1.4.1.9.9.305.2.2.10 | current |
| ciscoSystemExtHaGroupRev1 OBJECT-GROUP A collection of objects for High Availability. | 1.3.6.1.4.1.9.9.305.2.2.11 | current |
| ciscoSystemExtInfoTelnetGroup OBJECT-GROUP A collection of objects related to telnet support to the device. | 1.3.6.1.4.1.9.9.305.2.2.12 | current |
| ciscoSystemExtNotificationGroupSup2 NOTIFICATION-GROUP A collection of notification related to core file creation. | 1.3.6.1.4.1.9.9.305.2.2.13 | current |
| ciscoSystemExtSwFailureGroup3 OBJECT-GROUP A collection of objects related to the core file. | 1.3.6.1.4.1.9.9.305.2.2.14 | current |
| ciscoSystemExtSwFailureControlGroup OBJECT-GROUP This group of objects controls the sending of notifications defined in this MIB module. | 1.3.6.1.4.1.9.9.305.2.2.15 | current |
| ciscoSystemExtInfoFIPSGroup OBJECT-GROUP A collection of objects related to FIPS support to the device. | 1.3.6.1.4.1.9.9.305.2.2.16 | current |
| ciscoSystemExtInfoGroupRev3 OBJECT-GROUP A collection of objects for system information. | 1.3.6.1.4.1.9.9.305.2.2.17 | current |
| ciscoSystemSwitchingModeObjectsGroup OBJECT-GROUP A collection of objects to support Switching Mode feature. | 1.3.6.1.4.1.9.9.305.2.2.18 | current |
| ciscoSystemMaintModeObjectsGroup OBJECT-GROUP A collection of objects to support Maint mode state feature. | 1.3.6.1.4.1.9.9.305.2.2.19 | current |
| ciscoSystemMaintModeNotificationGroup NOTIFICATION-GROUP A collection of notification related to core file creation. | 1.3.6.1.4.1.9.9.305.2.2.20 | current |
| ciscoSystemReloadObjectsGroup OBJECT-GROUP A collection of objects to support system reload. | 1.3.6.1.4.1.9.9.305.2.2.21 | current |