MIBs Depot

CISCO-SYSLOG-EVENT-EXT-MIB

Registered at
1.3.6.1.4.1.9.9.270
Last updated
2002-02-12 00:00
Organization
Cisco System Inc.
Revisions
2002-02-12 00:00
Namespace
cisco
Source file
CISCO-SYSLOG-EVENT-EXT-MIB
Digest
sha256:a1e4d6abc77cf132383eb00b35f5df3937eedcc1af05b8a6feee612905e35b3a

Description

This MIB module extends the Cisco Syslog MIB and provides network management support to handle and process Syslog messages as device events.

Contact

Cisco Systems Customer Service Postal: 170 West Tasman Drive, San Jose CA 95134-1706. USA Tel: +1 800 553-NETS E-mail: cs-snmp@cisco.com

Imports

FromSymbols
CISCO-SMIciscoMgmt
CISCO-SYSLOG-MIBSyslogSeverity
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

CISCO-SMI
CISCO-SYSLOG-EVENT-EXT-MIB
CISCO-SYSLOG-MIB
INET-ADDRESS-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
CslogEventDisposition
TEXTUAL-CONVENTION
This definition specifies the manner in which a Syslog message should be handled by the system as a device event. Events are first recorded by the Syslog subsystem, and then they can be counted, displayed on the console, or forward to external device. The four disposition mechanisms are: none(0) - Record only, no further handling. count(1) - All Syslog messages received after this bit is set will be counted according to their corresponding event types. display(2) - All Syslog messages received after this bit is set will be displayed on the device console, HTML console or WEB pages (pending on severity level configuration of each display types). notify(3) - All Syslog messages received after this bit is set will cause notification to be sent.
current

Objects

NameOIDSyntaxAccessStatus
ciscoSyslogEventExtMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.270.1
cslogEventConfig
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.270.1.1
cslogEventDetailDefault
OBJECT-TYPE
This object defines the detail level at which Syslog messages are displayed on the console or HTML user interface. Detail level classifications are: noDisplay(1) - No display at all. sparseDetail(2) - Minimum detail. normalDetail(3) - General detail. verboseDetail(4) - Verbose detail. exhaustiveDetail(5) - Full detail.
1.3.6.1.4.1.9.9.270.1.1.1INTEGER {noDisplay(1), sparseDetail(2), normalDetail(3), verboseDetail(4), exhaustiveDetail(5)}read-writecurrent
cslogEventSeverityDispConsole
OBJECT-TYPE
This object indicates which syslog severity level messages can be displayed on the console. A high severity value implies a low severity. If the display bit on the object cslogEventDisposition is set for this severity, all messages have severity values less than or equal to clogMaxSeverity and this object will be displayed on the console.
1.3.6.1.4.1.9.9.270.1.1.2SyslogSeverityread-writecurrent
cslogEventSeverityDispHtmlGUI
OBJECT-TYPE
This object indicates which syslog severity level messages can be displayed on the event log GUI. A high severity value implies a low severity. If the display bit on the object cslogEventDisposition is set for this severity, all messages have severity values less than or equal to clogMaxSeverity and this object will be displayed on the event log GUI web pages.
1.3.6.1.4.1.9.9.270.1.1.3SyslogSeverityread-writecurrent
cslogEventSeverityDispHtmlConsol
OBJECT-TYPE
This object indicates which syslog severity level messages can be displayed on the HTML event log console. A high severity value implies a low severity. If the display bit on the object cslogEventDisposition is set for this severity, all messages have severity values less than or equal to clogMaxSeverity and this object will be displayed on the GUI browser console page.
1.3.6.1.4.1.9.9.270.1.1.4SyslogSeverityread-writecurrent
cslogEventDispositionTable
OBJECT-TYPE
This table contains parameters to configure Syslog message disposition mechanisms and keep message counts.
1.3.6.1.4.1.9.9.270.1.1.5not-accessiblecurrent
cslogEventDispositionEntry
OBJECT-TYPE
There is one entry per Syslog severity in the cslogEventDispositionTable. Each entry contains parameters for message disposition and count.
1.3.6.1.4.1.9.9.270.1.1.5.1not-accessiblecurrent
cslogEventDispositionSeverity
OBJECT-TYPE
This object defines the Syslog serverity.
1.3.6.1.4.1.9.9.270.1.1.5.1.1SyslogSeveritynot-accessiblecurrent
cslogEventDisposition
OBJECT-TYPE
This object defines the disposition method for Syslog messages of a specific severity.
1.3.6.1.4.1.9.9.270.1.1.5.1.2CslogEventDispositionread-writecurrent
cslogEventDispositionCount
OBJECT-TYPE
This is the number of Syslog messages of a specific severity.
1.3.6.1.4.1.9.9.270.1.1.5.1.3Counter32read-onlycurrent
ciscoSlogEventExtMIBConformance
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.270.2
ciscoSlogEventExtMIBCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.270.2.1
ciscoSlogEventExtMIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.270.2.2

Conformance

NameOIDStatus
ciscoSlogEventExtCompliance
MODULE-COMPLIANCE
The compliance statement for the cslogEventExt groups.
1.3.6.1.4.1.9.9.270.2.1.1current
ciscoSlogEventExtConfigGroup
OBJECT-GROUP
These are objects supporting Syslog event configuration.
1.3.6.1.4.1.9.9.270.2.2.1current
ciscoSlogEventExtStatsGroup
OBJECT-GROUP
These are objects to provide Syslog event statistics.
1.3.6.1.4.1.9.9.270.2.2.2current