CISCO-SNA-LLC-MIB
- Registered at
- 1.3.6.1.4.1.9.10.8
- Last updated
- 1995-05-10 00:00
- Organization
- cisco IBM engineering Working Group
- Revisions
- 1995-05-10 00:00
- Namespace
- cisco
- Source file
CISCO-SNA-LLC-MIB- Digest
sha256:849ebc2cc3cbaf112f4111434f182a38f4cd06a6a7423d0d0cfbb0a2331b7a4b
Description
This is the MIB module for objects used to manage LLC devices.
Contact
Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-snmp@cisco.com
Imports
| From | Symbols |
|---|---|
| CISCO-SMI | ciscoExperiment |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, iso |
| SNMPv2-TC | DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TimeStamp |
Imported by
1 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCO-SMI CISCO-SNA-LLC-MIB IANAifType-MIB IF-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ciscoSnaLlcMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.8.1 | |||
| llcPortGroup OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.8.1.1 | |||
| llcPortAdminTable OBJECT-TYPE This table contains objects that can be changed to manage an LLC port. Changing one of these parameters may take effect in the operating port immediately or may wait until the interface is restarted depending on the details of the implementation. | 1.3.6.1.4.1.9.10.8.1.1.1 | not-accessible | current | |
| llcPortAdminEntry OBJECT-TYPE A list of configured values for an LLC port. | 1.3.6.1.4.1.9.10.8.1.1.1.1 | not-accessible | current | |
| llcPortVirtualIndex OBJECT-TYPE This value represents a virtual LLC port. It is assigned by the agent. This value is set to 0 by the agent for interfaces identified by the ifIndex value that do not support virtual interfaces. | 1.3.6.1.4.1.9.10.8.1.1.1.1.1 | Integer32 (0..65535) | not-accessible | current |
| llcPortAdminName OBJECT-TYPE An octet string that defines the virtual port to which this interface is assigned. Its value shall be unique within the administered system. It must contain only ASCII printable characters. A write operation shall not take effect until the port is cycled inactive. | 1.3.6.1.4.1.9.10.8.1.1.1.1.2 | DisplayString (SIZE(1..8)) | read-write | current |
| llcPortAdminMaxSaps OBJECT-TYPE This parameter specifies the maximum number of SAPs that can be defined for this port. | 1.3.6.1.4.1.9.10.8.1.1.1.1.3 | Gauge32 | read-write | current |
| llcPortAdminMaxCcs OBJECT-TYPE This parameter specifies the maximum number of connection components that can be administratively defined for this port. | 1.3.6.1.4.1.9.10.8.1.1.1.1.4 | Gauge32 | read-write | current |
| llcPortAdminMaxPDUOctets OBJECT-TYPE This object denotes the default maximum I PDU size, in octets, that LLCs on this port may send to their remote LLC partners. This count is referred to as 'N1' in the IEEE 802.2 specification [5]. This port default value may be overridden by a non-zero SAP default value in the llcSapAdminMaxIPDUOctetsSend object or by a non-zero value in the llcCcAdminMaxIPDUOctetsSend object. At connection setup, the remote LLC may send, using an XID frame, the maximum I PDU size which it is prepared to receive. If so, an implementation may choose to override the administered maximum PDU size with the dynamically learned value and should reflect this in the llcCcOperMaxIPDUOctetsSend object for the connection component. The I PDU size includes all octets in a frame, excluding framing characters, the MAC header and link header. | 1.3.6.1.4.1.9.10.8.1.1.1.1.5 | Integer32 | read-write | current |
| llcPortAdminMaxUnackedIPDUsSend OBJECT-TYPE This object denotes the default maximum consecutive unacknowledged I PDU frames that LLCs on this port may send to their remote LLC partners. This count is referred to as 'k' in the IEEE 802.2 specification [5]. This port default value may be overridden by a non-zero SAP default value in the llcSapAdminMaxUnackedIPDUsSend object or by a non-zero value in the llcCcAdminMaxUnackedIPDUsSend object. At connection setup, the remote LLC may send, using an XID frame, the maximum number of unacknowledged I PDUs which it is prepared to receive. If so, an implementation may choose to override the administered maximum number of unacknowledged PDUs with the dynamically learned value and should reflect this in the llcCcOperMaxUnackedIPDUsSend object for the connection component. | 1.3.6.1.4.1.9.10.8.1.1.1.1.6 | INTEGER (1..127) | read-write | current |
| llcPortAdminMaxUnackedIPDUsRcv OBJECT-TYPE This object denotes the default maximum number of unacknowledged I PDUs that LLCs on this port can expect to receive from their remote LLC partners. This count is referred to as 'k' in the IEEE 802.2 specification [5]. This port default value may be overridden by a non-zero SAP default value in the llcSapAdminMaxUnackedIPDUsRcv object or by a non-zero value in the llcCcAdminMaxUnackedIPDUsRcvd object. At connection setup, an implementation may choose to send this value to the remote LLC, using an XID frame. | 1.3.6.1.4.1.9.10.8.1.1.1.1.7 | INTEGER (1..127) | read-write | current |
| llcPortAdminMaxRetransmits OBJECT-TYPE This object denotes the default value for the maximum number of times which LLCs on this port shall retry a PDU following the expiration of the acknowledgement timer, the P-bit timer or the reject timer. When these retries are exhausted, the link shall be declared inactive. This count is referred to as 'N2' in the IEEE 802.2 specification [5]. This port default value may be overridden by a non-zero SAP default value in the llcSapAdminMaxretransmits object or by a non-zero value in the llcCcAdminMaxRetransmits object. | 1.3.6.1.4.1.9.10.8.1.1.1.1.8 | Integer32 | read-write | current |
| llcPortAdminAckTimer OBJECT-TYPE This object denotes the default value for the time interval during which the LLCs on this port shall expect to receive either: 1) an acknowledgement to one or more outstanding I PDUs. or 2) a response PDU to an unnumbered command PDU. The expiration of this timer shall cause the unacknowledged frames to be retransmitted (up to N2 times). For Implementations that only use a single 'T1' Value (ref. IBM Token-Ring Network technical reference Chapter 11). This object will be used to control/read the value. This port default value may be overridden by a non-zero value in the llcSapAdminAckTimer object or by a non-zero value in the llcCcAdminAckTimer object. | 1.3.6.1.4.1.9.10.8.1.1.1.1.9 | TimeTicks | read-write | current |
| llcPortAdminPbitTimer OBJECT-TYPE This object denotes the default value for the time interval during which the LLCs on this port shall expect to receive a PDU with the F bit set to '1' in response to a Type 2 command with the P bit set to '1'. The expiration of this timer shall cause the command with the poll bit to be retransmitted (up to N2 times). This port default value may be overridden by a non-zero SAP default value in the llcSapAdminPbitTimer object or by a non-zero value in the llcCcAdminPbitTimer object. | 1.3.6.1.4.1.9.10.8.1.1.1.1.10 | TimeTicks | read-write | current |
| llcPortAdminRejTimer OBJECT-TYPE This object denotes the default value for the time interval during which the LLCs on this port shall expect to receive a reply to a REJ PDU. The expiration of this timer shall cause the REJ PDU to be retransmitted (up to N2 times). This port default value may be overridden by a non-zero SAP default value in the llcSapAdminRejTimer object or by a non-zero value in the llcCcAdminRejTimer object. | 1.3.6.1.4.1.9.10.8.1.1.1.1.11 | TimeTicks | read-write | current |
| llcPortAdminBusyTimer OBJECT-TYPE This object denotes the default value for the time interval during which the LLCs on this port shall expect to receive an indication that a busy condition at the remote LLC has cleared. The expiration of this timer shall cause the link to be declared inactive. This port default value may be overridden by a non-zero SAP default value in the llcSapAdminBusyTimer object or by a non-zero value in the llcCcAdminBusyTimer object. | 1.3.6.1.4.1.9.10.8.1.1.1.1.12 | TimeTicks | read-write | current |
| llcPortAdminInactTimer OBJECT-TYPE This object denotes the default value for the time interval during which the LLCs on this port shall expect to receive any PDU from the remote LLC. This function is not described in the IEEE 802.2 specification [5]. It is listed in the IBM Token-Ring Network Architecture [6] Reference as the Ti parameter and is widely implemented. The expiration of this timer shall cause the local LLC to send a PDU to the remote LLC with the P bit set to '1'. The value for llcPortAdminInactTimer must be much greater than the value for llcPortAdminDelayAckTimer. This port default value may be overridden by a non-zero SAP default value in the llcSapAdminInactTimer object or by a non-zero value in the llcCcAdminInactTimer object. Any value for this object less than or equal to the acknowledgement timer shall mean that the timer is not used. | 1.3.6.1.4.1.9.10.8.1.1.1.1.13 | TimeTicks | read-write | current |
| llcPortAdminDelayAckCount OBJECT-TYPE This object denotes the default value for the maximum number of consecutive I PDUs which the LLCs on this port shall receive during the interval defined by llcCcOperDelayTimertime without sending an immediate acknowledgement. This must be less than or equal to the value of llcCcOperMaxUnackIPDURcv. This function is not described in the IEEE 802.2 specification [5]. It is listed in the IBM Token-Ring Network Architecture Reference [6] as the N3 parameter and is widely implemented. This port default value may be overridden by a non-zero SAP default value in the llcSapAdminDelayAckCount object or by a non-zero value in the llcCcAdminDelayCount object. A value of one indicates that acknowledgments will be sent immediately and that the value of llcPortAdminDelayAckTimer shall be ignored. | 1.3.6.1.4.1.9.10.8.1.1.1.1.14 | Integer32 | read-write | current |
| llcPortAdminDelayAckTimer OBJECT-TYPE This object denotes the default value for the time interval during which the LLCs on this port shall delay acknowledgment of one or more I PDUs (up to the value of llcCcOperDelayAckCount). This function is not described in the IEEE 802.2 specification [5]. It is listed in the IBM Token-Ring Network Architecture Reference [6] as the T2 parameter and is widely implemented. The expiration of this timer shall cause the local LLC to acknowledge all unacknowledged I PDUs. This object is associated with the llcSapAdminDelayAckCount object and is only defined if that object has a value greater than one. | 1.3.6.1.4.1.9.10.8.1.1.1.1.15 | TimeTicks | read-write | current |
| llcPortAdminNw OBJECT-TYPE This object denotes the default value for the number of IPDUs that must be acknowledged before the working window size (Ww) can be incremented by 1 when the working window is not equal to the maximum transmit window size (TW). It controls the gradual incrementing of Ww in congestion situations. This function is not described in the IEEE 802.2 specification [5]. However, it is listed in the IBM Token-Ring Network Architecture Reference [6] as the Nw parameter and is widely implemented. This port default value may be overridden by a non-zero SAP default value in the llcSapAdminNw object. | 1.3.6.1.4.1.9.10.8.1.1.1.1.16 | Integer32 | read-write | current |
| llcPortOperTable OBJECT-TYPE This table contains current LLC port parameters. Many of these objects have corresponding objects in the llcPortAdminTable. | 1.3.6.1.4.1.9.10.8.1.1.2 | not-accessible | current | |
| llcPortOperEntry OBJECT-TYPE Currently set parameters for a specific LLC port. | 1.3.6.1.4.1.9.10.8.1.1.2.1 | not-accessible | current | |
| llcPortOperMacAddress OBJECT-TYPE This is the MAC Address for this local port. | 1.3.6.1.4.1.9.10.8.1.1.2.1.1 | MacAddress | read-only | current |
| llcPortOperNumSaps OBJECT-TYPE This object defines the number of SAPs on this port that are currently enabled. In other words, this object is a count of the number of instances of llcSapOperEntry that have a llcSapOperStatus value of 'active(2)'. | 1.3.6.1.4.1.9.10.8.1.1.2.1.2 | Gauge32 | read-only | current |
| llcPortOperHiWaterNumSaps OBJECT-TYPE This object reflects the highest number of SAPs active on this Port simultaneously. In other words, this object is a count of the number of instances of llcSapOperEntry on this Port. | 1.3.6.1.4.1.9.10.8.1.1.2.1.3 | Gauge32 | read-only | current |
| llcPortOperSimRim OBJECT-TYPE This object reflects support for transmission and receipt of SIM and RIM control frames for this port. SIM and RIM are not defined in the ANSI/IEEE 802.2 specification [5] nor in the IBM Token Ring Architecture Reference [6]. These control frames are used for the remote program load of IBM communications processors. | 1.3.6.1.4.1.9.10.8.1.1.2.1.4 | INTEGER {no(1), yes(2)} | read-only | current |
| llcPortOperLastModifyTime OBJECT-TYPE This object describes the value of sysUpTime when this port definition was last modified. If the port has not been modified, then this value shall be zero. | 1.3.6.1.4.1.9.10.8.1.1.2.1.5 | TimeStamp | read-only | current |
| llcPortStatsTable OBJECT-TYPE Each entry in this table contains statistics for a specific LLC port. | 1.3.6.1.4.1.9.10.8.1.1.3 | not-accessible | current | |
| llcPortStatsEntry OBJECT-TYPE A list of statistics for an LLC port. | 1.3.6.1.4.1.9.10.8.1.1.3.1 | not-accessible | current | |
| llcPortStatsPDUsIn OBJECT-TYPE This object reflects the total number of PDUs that have been received on this port. This object is initialized to zero when the port is created. | 1.3.6.1.4.1.9.10.8.1.1.3.1.1 | Counter32 | read-only | current |
| llcPortStatsPDUsOut OBJECT-TYPE This object reflects the total number of PDUs that have been transmitted on this port. This object is initialized to zero when the port is created. | 1.3.6.1.4.1.9.10.8.1.1.3.1.2 | Counter32 | read-only | current |
| llcPortStatsOctetsIn OBJECT-TYPE This object reflects the total octets received on this port. This object is initialized to zero when the port is created. | 1.3.6.1.4.1.9.10.8.1.1.3.1.3 | Counter32 | read-only | current |
| llcPortStatsOctetsOut OBJECT-TYPE This object reflects the total octets transmitted on this port. This object is initialized to zero when the port is created. | 1.3.6.1.4.1.9.10.8.1.1.3.1.4 | Counter32 | read-only | current |
| llcPortStatsTESTCommandsIn OBJECT-TYPE This object reflects the total number of TEST commands received on this port. | 1.3.6.1.4.1.9.10.8.1.1.3.1.5 | Counter32 | read-only | current |
| llcPortStatsTESTResponsesOut OBJECT-TYPE This object reflects the total number of TEST responses transmitted on this port in response to TEST commands received. | 1.3.6.1.4.1.9.10.8.1.1.3.1.6 | Counter32 | read-only | current |
| llcPortStatsLocalBusies OBJECT-TYPE This object reflects the total number of times that the local connection components on this port have entered a busy state (RNR). This object is initialized to zero when the port is created. | 1.3.6.1.4.1.9.10.8.1.1.3.1.7 | Counter32 | read-only | current |
| llcPortStatsUnknownSaps OBJECT-TYPE This object reflects the total number of times that a connection attempt, from a remote LLC station, for an unknown SAP was detected on this port. | 1.3.6.1.4.1.9.10.8.1.1.3.1.8 | Counter32 | read-only | current |
| llcSapGroup OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.8.1.2 | |||
| llcSapAdminTable OBJECT-TYPE This table contains objects that can be changed to manage a local SAP. Changing one of these parameters may take effect in the operating CC immediately or may wait until the interface is restarted depending on the details of the implementation. | 1.3.6.1.4.1.9.10.8.1.2.1 | not-accessible | current | |
| llcSapAdminEntry OBJECT-TYPE A list of configured values for a local SAP. | 1.3.6.1.4.1.9.10.8.1.2.1.1 | not-accessible | current | |
| llcSapNumber OBJECT-TYPE The address of this local SAP. | 1.3.6.1.4.1.9.10.8.1.2.1.1.1 | INTEGER (1..255) | not-accessible | current |
| llcSapAdminMaxPDUOctets OBJECT-TYPE This object denotes the default maximum I PDU size, in octets, that LLCs on this SAP may send to their remote connection component partners. This count is referred to as 'N1' in the IEEE 802.2 specification [5]. A zero value for this object indicates that the port default, llcPortAdminMaxIPDUOctetsSend, shall be used as the SAP default. This SAP default value may be overridden by a non-zero value in the llcCcAdminMaxIPDUOctetsSend object. At connection setup, the remote LLC may send, using an XID frame, the maximum I PDU size which it is prepared to receive. If so, an implementation may choose to override the administered maximum PDU size with the dynamically learned value and should reflect this in the llcCcOperMaxIPDUOctetsSend object for the connection component. The I PDU size includes all octets in a frame, excluding framing characters, the MAC header and link header. | 1.3.6.1.4.1.9.10.8.1.2.1.1.2 | Integer32 | read-write | current |
| llcSapAdminMaxUnackedIPDUsSend OBJECT-TYPE This object denotes the default maximum consecutive unacknowledged I PDU frames that LLCs on this SAP may send to their remote LLC partners. This count is referred to as 'k' in the IEEE 802.2 specification [5]. A zero value for this object indicates that the port default, llcPortAdminMaxUnackedIPDUsSend, shall be used as the SAP default. This SAP default value may be overridden by a non-zero value in the llcCcAdminMaxUnackedIPDUsSend object. At connection setup, the remote LLC may send, using an XID frame, the maximum number of unacknowledged I PDUs which it is prepared to receive. If so, an implementation may choose to override the administered maximum number of unacknowledged PDUs with the dynamically learned value and should reflect this in the llcCcOperMaxUnackedIPDUsSend object for the connection component. | 1.3.6.1.4.1.9.10.8.1.2.1.1.3 | INTEGER (0..127) | read-write | current |
| llcSapAdminMaxUnackedIPDUsRcv OBJECT-TYPE This object denotes the default maximum number of unacknowledged I PDUs that LLCs on this SAP can expect to receive from their remote LLC partners. This count is referred to as 'k' in the IEEE 802.2 specification [5]. A zero value for this object indicates that the port default, llcPortAdminMaxUnackedIPDUsRcv, shall be used as the SAP default. This SAP default value may be overridden by a non-zero value in the llcCcAdminMaxUnackedIPDUsRcv object. At connection setup, an implementation may choose to send this value to the remote LLC, using an XID frame. | 1.3.6.1.4.1.9.10.8.1.2.1.1.4 | INTEGER (0..127) | read-write | current |
| llcSapAdminMaxRetransmits OBJECT-TYPE This object denotes the default value for the maximum number of times that LLCs on this SAP shall retry PDUs following the expiration of the acknowledgement timer, the P-bit timer or the reject timer. When these retries are exhausted, the link shall be declared inactive. This count is referred to as 'N2' in the IEEE 802.2 specification [5]. A zero value for this object indicates that the port default, llcPortAdminMaxRetransmits, shall be used as the SAP default. This SAP default value may be overridden by a non-zero value in the llcCcAdminMaxRetransmits. | 1.3.6.1.4.1.9.10.8.1.2.1.1.5 | Integer32 | read-write | current |
| llcSapAdminAckTimer OBJECT-TYPE This object denotes the default value for the time interval during which the LLCs on this SAP shall expect to receive either: 1) an acknowledgement to one or more outstanding I PDUs. or 2) a response PDU to an unnumbered command PDU. The expiration of this timer shall cause the frame unacknowledged frames to be retransmitted (up to N2 times). A zero value for this object indicates that the port default, llcPortAdminAckTimer, shall be used as the SAP default. This SAP default value may be overridden by a non-zero value in the llcCcAdminAckTimer. | 1.3.6.1.4.1.9.10.8.1.2.1.1.6 | TimeTicks | read-write | current |
| llcSapAdminPbitTimer OBJECT-TYPE This object denotes the default value for the time interval during which the LLCs on this port shall expect to receive a PDU with the F bit set to '1' in response to a Type 2 command with the P bit set to '1'. The expiration of this timer shall cause the REJ PDU to be retransmitted (up to N2 times). A zero value for this object indicates that the port default, llcPortAdminPbitTimer, shall be used as the SAP default. This SAP default value may be overridden by a non-zero value in the llcCcAdminPbitTimer. | 1.3.6.1.4.1.9.10.8.1.2.1.1.7 | TimeTicks | read-write | current |
| llcSapAdminRejTimer OBJECT-TYPE This object denotes the default value for the time interval during which the LLCs on this SAP shall expect to receive a reply to a REJ PDU. The expiration of this timer shall cause the REJ PDU to be retransmitted (up to N2 times). A zero value for this object indicates that the port default, llcPortAdminRejTimer, shall be used as the SAP default. This SAP default value may be overridden by a non-zero value in the llcCcAdminRejTimer. | 1.3.6.1.4.1.9.10.8.1.2.1.1.8 | TimeTicks | read-write | current |
| llcSapAdminBusyTimer OBJECT-TYPE This object denotes the default value for the time interval during which the LLCs on this SAP shall expect to receive an indication that a busy condition at the remote LLC has cleared. The expiration of this timer shall cause the link to be declared inactive. A zero value for this object indicates that the port default, llcPortAdminBusyTimer, shall be used as the SAP default. This SAP default value may be overridden by a non-zero value in the llcCcAdminBusyTimer. | 1.3.6.1.4.1.9.10.8.1.2.1.1.9 | TimeTicks | read-write | current |
| llcSapAdminInactTimer OBJECT-TYPE This object denotes the default value for the time interval during which the LLCs on this SAP shall expect to receive any PDU from the remote LLC. This function is not described in the IEEE 802.2 specification [5] but is widely implemented. The expiration of this timer shall cause the local LLC to send a PDU to the remote LLC with the P bit set to '1'. A zero value for this object indicates that the port default, llcPortAdminInactTimer, shall be used as the SAP default. This SAP default value may be overridden by a non-zero value in the llcCcAdminInactTimer. Any value for this object less than or equal to the acknowledgement timer shall mean that the timer is not used. | 1.3.6.1.4.1.9.10.8.1.2.1.1.10 | TimeTicks | read-write | current |
| llcSapAdminDelayAckCount OBJECT-TYPE This object denotes the default value for the maximum number of consecutive I PDUs which the LLCs on this SAP shall receive during the interval defined by llcCcOperDelayTimer without sending an immediate acknowledgement. This must be less than or equal to the value of llcCcOperMaxUnackIPDURcv. This function is not described in the IEEE 802.2 specification [5] but is widely implemented. A zero value for this object indicates that the port default, llcPortAdminDelayAck, shall be used as the SAP default. This SAP default value may be overridden by a non-zero value in the llcCcAdminDelayAckCount. A value of one indicates that acknowledgments will be sent immediately and that the value of llcSapAdminDelayAckTimer shall be ignored. | 1.3.6.1.4.1.9.10.8.1.2.1.1.11 | Integer32 | read-write | current |
| llcSapAdminDelayAckTimer OBJECT-TYPE This object denotes the default value for the time interval during which the LLCs on this SAP shall delay acknowledgment of one or more I PDUs (up to the value of llcCcOperDelayAckCount). This function is not described in the IEEE 802.2 specification [5]. It is listed in the IBM Token-Ring Network Architecture Reference [6] as the T2 parameter and is widely implemented. The expiration of this timer shall cause the local LLC to acknowledge all unacknowledged I PDUs. This object is associated with the llcSapAdminDelayAckCount object and is only defined if that object has a value greater than one. | 1.3.6.1.4.1.9.10.8.1.2.1.1.12 | TimeTicks | read-write | current |
| llcSapAdminNw OBJECT-TYPE This object denotes the default value for the number of IPDUs that must be acknowledged before the working window size (Ww) can be incremented by 1 when the working window is not equal to the maximum transmit window size (TW). It controls the gradual incrementing of Ww in congestion situations. This function is not described in the IEEE 802.2 specification [5]. However, it is listed in the IBM Token-Ring Network Architecture Reference [6] as the Nw parameter and is widely implemented. This SAP default value may be overridden by a non-zero Cc default value in the llcCcAdminNw object. | 1.3.6.1.4.1.9.10.8.1.2.1.1.13 | Integer32 | read-write | current |
| llcSapOperTable OBJECT-TYPE This table contains objects that reflect the current operational parameters of a local SAP. | 1.3.6.1.4.1.9.10.8.1.2.2 | not-accessible | current | |
| llcSapOperEntry OBJECT-TYPE A list of configured values for a local SAP. | 1.3.6.1.4.1.9.10.8.1.2.2.1 | not-accessible | current | |
| llcSapOperStatus OBJECT-TYPE This parameter describes the actual state of this local SAP. | 1.3.6.1.4.1.9.10.8.1.2.2.1.1 | INTEGER {inactive(1), active(2)} | read-only | current |
| llcSapOperNumCcs OBJECT-TYPE This object defines the number of connection components on this SAP that are currently in one of the 'connected' states. In other words, this object is a count of the number of instances of llcCcOperEntry that have a llcCcOperState value greater than or equal to 'normal(3)'. | 1.3.6.1.4.1.9.10.8.1.2.2.1.2 | Integer32 | read-only | current |
| llcSapOperHiWaterNumCcs OBJECT-TYPE This object reflects the highest number of connection components on this SAP simultaneously in one of the 'connected' states. In other words, this object is a count of the number of instances of llcCcOperEntry that have a llcCcOperState value greater than or equal to 'normal(3)' concurrently on this SAP. | 1.3.6.1.4.1.9.10.8.1.2.2.1.3 | Gauge32 | read-only | current |
| llcSapOperLlc2Support OBJECT-TYPE This parameter describes whether or not the LLC implementation supports LLC2 connection components. | 1.3.6.1.4.1.9.10.8.1.2.2.1.4 | INTEGER {no(1), yes(2)} | read-only | current |
| llcSapStatsTable OBJECT-TYPE This table contains objects that reflect the current operational parameters of a local SAP. | 1.3.6.1.4.1.9.10.8.1.2.3 | not-accessible | current | |
| llcSapStatsEntry OBJECT-TYPE A list of configured values for a local SAP. | 1.3.6.1.4.1.9.10.8.1.2.3.1 | not-accessible | current | |
| llcSapStatsLocalBusies OBJECT-TYPE This object reflects the total number of times that the local connection components on this SAP have entered a busy state (RNR). This object is initialized to zero when the SAP is created. | 1.3.6.1.4.1.9.10.8.1.2.3.1.1 | Counter32 | read-only | current |
| llcSapStatsRemoteBusies OBJECT-TYPE This object reflects the total number of times that the adjacent (i.e. remote) connection components on this SAP have entered a busy state (RNR). This object is initialized to zero when the SAP is created. | 1.3.6.1.4.1.9.10.8.1.2.3.1.2 | Counter32 | read-only | current |
| llcSapStatsIFramesIn OBJECT-TYPE This object reflects the total number of I-Frames that have been received by connection components on this SAP. This object is initialized to zero when the SAP is created. | 1.3.6.1.4.1.9.10.8.1.2.3.1.3 | Counter32 | read-only | current |
| llcSapStatsIFramesOut OBJECT-TYPE This object reflects the total number of I-Frames that have been transmitted by connection components on this SAP. This object is initialized to zero when the SAP is created. | 1.3.6.1.4.1.9.10.8.1.2.3.1.4 | Counter32 | read-only | current |
| llcSapStatsIOctetsIn OBJECT-TYPE This object reflects the total octets received from adjacent connection components on this SAP. This object covers the address, control, and information field of I-Frames only. This object is initialized to zero when the SAP is created. | 1.3.6.1.4.1.9.10.8.1.2.3.1.5 | Counter32 | read-only | current |
| llcSapStatsIOctetsOut OBJECT-TYPE This object reflects the total octets transmitted to adjacent connection components on this SAP. This object covers the address, control, and information field of I-Frames only. This object is initialized to zero when the SAP is created. | 1.3.6.1.4.1.9.10.8.1.2.3.1.6 | Counter32 | read-only | current |
| llcSapStatsSFramesIn OBJECT-TYPE This object reflects the total number of S-Frames that have been received by connection components on this SAP. This object is initialized to zero when the SAP is created. Note - the ratio of the number of I-Frames to S-Frames might serve as a measure of link efficiency and, for instance, could be used to tune the acknowledgement timer. | 1.3.6.1.4.1.9.10.8.1.2.3.1.7 | Counter32 | read-only | current |
| llcSapStatsSFramesOut OBJECT-TYPE This object reflects the total number of S-Frames that have been transmitted by connection components on this SAP. This object is initialized to zero when the SAP is created. Note - the ratio of the number of I-Frames to S-Frames might serve as a measure of link efficiency and, for instance, could be used to tune the acknowledgement timer. | 1.3.6.1.4.1.9.10.8.1.2.3.1.8 | Counter32 | read-only | current |
| llcSapStatsRetransmitsOut OBJECT-TYPE This object reflects the total number of I-Frames retransmitted by all local connection components on this SAP. This object is initialized to zero when the SAP is created. | 1.3.6.1.4.1.9.10.8.1.2.3.1.9 | Counter32 | read-only | current |
| llcSapStatsREJsIn OBJECT-TYPE This object reflects the total REJ frames received from all adjacent LLC connection components on this SAP since it was created. | 1.3.6.1.4.1.9.10.8.1.2.3.1.10 | Counter32 | read-only | current |
| llcSapStatsREJsOut OBJECT-TYPE This object reflects the total REJ frames transmitted to an adjacent LLC connection components on this SAP since it was created. | 1.3.6.1.4.1.9.10.8.1.2.3.1.11 | Counter32 | read-only | current |
| llcSapStatsWwCount OBJECT-TYPE This object reflects the total number of times, since this SAP was created, that the dynamic window algorithm has been invoked to reduce the value of Ww on any of the connection components of this SAP. This object is initialized to zero when the SAP is created. This function is not described in the IEEE 802.2 specification [5], but is widely implemented. | 1.3.6.1.4.1.9.10.8.1.2.3.1.12 | Counter32 | read-only | current |
| llcSapStatsTESTCommandsIn OBJECT-TYPE This object denotes the number of TEST commands this SAP has received and is a measure of the number of stations in the network trying to connect up. This object is initialized to zero when the SAP is created. | 1.3.6.1.4.1.9.10.8.1.2.3.1.13 | Counter32 | read-only | current |
| llcSapStatsTESTCommandsOut OBJECT-TYPE This object denotes the number of TEST commands this SAP has sent and is a measure of the number of other stations we are trying to connect to. This object is initialized to zero when the SAP is created. | 1.3.6.1.4.1.9.10.8.1.2.3.1.14 | Counter32 | read-only | current |
| llcSapStatsTESTResponsesIn OBJECT-TYPE This object denotes the number of TEST responses this SAP has received and is a measure of the number of stations in the network responding to TEST commands this SAP has sent. This object is initialized to zero when the SAP is created. | 1.3.6.1.4.1.9.10.8.1.2.3.1.15 | Counter32 | read-only | current |
| llcSapStatsTESTResponsesOut OBJECT-TYPE This object denotes the number of TEST responses this SAP has sent and is a measure of the number of other stations trying to connect to this SAP. This object is initialized to zero when the SAP is created. | 1.3.6.1.4.1.9.10.8.1.2.3.1.16 | Counter32 | read-only | current |
| llcSapStatsXIDCommandsIn OBJECT-TYPE This object denotes the number of XID commands this SAP has received and is a measure of the number of stations in the network trying to connect to this SAP. This object is a count of all XIDs, including SNA XID, IEEE XID, null XID, and non-activation XIDs. This object is initialized to zero when the SAP is created. | 1.3.6.1.4.1.9.10.8.1.2.3.1.17 | Counter32 | read-only | current |
| llcSapStatsXIDCommandsOut OBJECT-TYPE This object denotes the number of XID commands this SAP has sent and is a measure of the number of other stations this SAP is trying to connect to. This object is a count of all XIDs, including SNA XID, IEEE XID, null XID, and non-activation XIDs. This object is initialized to zero when the SAP is created. | 1.3.6.1.4.1.9.10.8.1.2.3.1.18 | Counter32 | read-only | current |
| llcSapStatsXIDResponsesIn OBJECT-TYPE This object denotes the number of XID responses this SAP has received and is a measure of the number of stations in the network responding to TEST commands this SAP has sent. This object is a count of all XIDs, including SNA XID, IEEE XID, null XID, and non-activation XIDs. This object is initialized to zero when the SAP is created. | 1.3.6.1.4.1.9.10.8.1.2.3.1.19 | Counter32 | read-only | current |
| llcSapStatsXIDResponsesOut OBJECT-TYPE This object denotes the number of XID responses this SAP has sent and is a measure of the number of other stations trying to connect to this SAP. This object is a count of all XIDs, including SNA XID, IEEE XID, null XID, and non-activation XIDs. This object is initialized to zero when the SAP is created. | 1.3.6.1.4.1.9.10.8.1.2.3.1.20 | Counter32 | read-only | current |
| llcSapStatsUIFramesIn OBJECT-TYPE This object reflects the total number of unnumbered information (UI) frames received on a local SAP. | 1.3.6.1.4.1.9.10.8.1.2.3.1.21 | Counter32 | read-only | current |
| llcSapStatsUIFramesOut OBJECT-TYPE This object reflects the total number of unnumbered information (UI) frames sent on a local SAP. | 1.3.6.1.4.1.9.10.8.1.2.3.1.22 | Counter32 | read-only | current |
| llcSapStatsUIOctetsIn OBJECT-TYPE This object reflects the total octets received from adjacent connection components on this SAP. This object covers the address, control, and information field of UI-Frames only. This object is initialized to zero when the SAP is created. | 1.3.6.1.4.1.9.10.8.1.2.3.1.23 | Counter32 | read-only | current |
| llcSapStatsUIOctetsOut OBJECT-TYPE This object reflects the total octets transmitted to adjacent connection components on this SAP. This object covers the address, control, and information field of UI-Frames only. This object is initialized to zero when the SAP is created. | 1.3.6.1.4.1.9.10.8.1.2.3.1.24 | Counter32 | read-only | current |
| llcSapStatsConnectOk OBJECT-TYPE This object reflects the total number of successful connections that have been established on this SAP since the SAP was created. A successful connection is indicated by a successful SABME/UA exchange. | 1.3.6.1.4.1.9.10.8.1.2.3.1.25 | Counter32 | read-only | current |
| llcSapStatsConnectFail OBJECT-TYPE This object reflects the total number of unsuccessful connections that have been attempted on this SAP since the SAP was created. An unsuccessful connection attempt is indicated by a SABME/DM exchange or a SABME/timeout. | 1.3.6.1.4.1.9.10.8.1.2.3.1.26 | Counter32 | read-only | current |
| llcSapStatsDisconnect OBJECT-TYPE This object reflects the total number of normal disconnections that have been performed on this SAP since the SAP was created. A normal disconnection is indicated by a successful DISC/UA exchange or merely a DISC sent or received. | 1.3.6.1.4.1.9.10.8.1.2.3.1.27 | Counter32 | read-only | current |
| llcSapStatsDisconnectFRMRSend OBJECT-TYPE This object reflects the total number of abnormal disconnections (resulting from a FRMR being sent) that have been performed on this SAP since the SAP was created. | 1.3.6.1.4.1.9.10.8.1.2.3.1.28 | Counter32 | read-only | current |
| llcSapStatsDisconnectFRMRRcv OBJECT-TYPE This object reflects the total number of abnormal disconnections (resulting from a FRMR being received) that have been performed on this SAP since the SAP was created. | 1.3.6.1.4.1.9.10.8.1.2.3.1.29 | Counter32 | read-only | current |
| llcSapStatsDisconnectTimer OBJECT-TYPE This object reflects the total number of abnormal disconnections (resulting from a timer expiration) that have been performed on this SAP since the SAP was created. | 1.3.6.1.4.1.9.10.8.1.2.3.1.30 | Counter32 | read-only | current |
| llcSapStatsDMsInABM OBJECT-TYPE This object reflects the total number of Disconnect Mode responses that have been received for CCs in ABM mode on this SAP since the SAP was created. | 1.3.6.1.4.1.9.10.8.1.2.3.1.31 | Counter32 | read-only | current |
| llcSapStatsSABMEsInABM OBJECT-TYPE This object reflects the total number of SABMEs that have been received for CCs in already in ABM mode on this SAP since the SAP was created. | 1.3.6.1.4.1.9.10.8.1.2.3.1.32 | Counter32 | read-only | current |
| llcCcGroup OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.8.1.3 | |||
| llcCcAdminTable OBJECT-TYPE This table contains objects that can be changed to manage an LLC connection component. Changing one of these parameters may take effect in the operating link immediately or may wait until the link is restarted depending on the details of the implementation. The entries in llcCcAdminTable can be created either by an agent or a management station. The management station can create an entry in llcCcAdminTable by setting the appropriate value in llcCcAdminRowStatus. Most of the objects in this read-create table have corresponding read-only objects in the llcCcOperTable that reflect the current operating value. The operating values may be different from these configured values if changed by XID negotiation or if a configured parameter was changed after the link was started. | 1.3.6.1.4.1.9.10.8.1.3.1 | not-accessible | current | |
| llcCcAdminEntry OBJECT-TYPE A list of configured values for an LLC connection component. | 1.3.6.1.4.1.9.10.8.1.3.1.1 | not-accessible | current | |
| llcCcRMac OBJECT-TYPE This value is the remote MAC address for this Connection Component. This value is provided by the SNMP agent. | 1.3.6.1.4.1.9.10.8.1.3.1.1.1 | MacAddress | not-accessible | current |
| llcCcRSap OBJECT-TYPE This value is the address of the remote SAP for this Connection Component. This value is provided by the SNMP agent. | 1.3.6.1.4.1.9.10.8.1.3.1.1.2 | INTEGER (1..255) | not-accessible | current |
| llcCcAdminBounce OBJECT-TYPE This object controls the resetting of the connection component. Setting this value to yes(2) results in the connection component being reset, llcCcOperState transitioning to a value of aDm(1), and the value of llcCcAdminBounce being set back to no(1). | 1.3.6.1.4.1.9.10.8.1.3.1.1.3 | INTEGER {no(1), yes(2)} | read-create | current |
| llcCcAdminMaxPDUOctets OBJECT-TYPE This object denotes the maximum I PDU size, in octets, that this LLC SAP may send to its remote connection component partner. This count is referred to as 'N1' in the IEEE 802.2 specification [5]. This object contains an administrative value which will be applied the next time this connection is established. A zero value for this object indicates that the SAP default, llcSapAdminMaxIPDUOctetsSend, shall be used. At connection setup, the remote LLC may send, using an XID frame, the maximum I PDU size which it is prepared to receive. If so, an implementation may choose to override the administered maximum PDU size with the dynamically learned value and should reflect this in the llcCcOperMaxIPDUOctetsSend object for the connection component. The I PDU size includes all octets in a frame, excluding framing characters, the MAC header and link header. | 1.3.6.1.4.1.9.10.8.1.3.1.1.4 | Integer32 | read-create | current |
| llcCcAdminMaxUnackedIPDUsSend OBJECT-TYPE This object denotes the maximum consecutive unacknowledged I PDU frames that this LLC may send to its remote LLC partner. This count is referred to as 'k' in the IEEE 802.2 specification [5]. This object contains an administrative value which will be applied the next time this connection is established. A zero value for this object indicates that the SAP default, llcSapAdminMaxUnackedIPDUsSend, shall be used. At connection setup, the remote LLC may send, using an XID frame, the maximum number of unacknowledged I PDUs which it is prepared to receive. If so, an implementation may choose to override the administered maximum number of unacknowledged PDUs with the dynamically learned value and should reflect this in the llcCcOperMaxUnackedIPDUsSend object for the connection component. | 1.3.6.1.4.1.9.10.8.1.3.1.1.5 | INTEGER (0..127) | read-create | current |
| llcCcAdminMaxUnackedIPDUsRcv OBJECT-TYPE This object denotes the maximum number of unacknowledged I PDUs that this LLC can expect to receive from its remote LLC partner. This count is referred to as 'k' in the IEEE 802.2 specification [5]. This object contains an administrative value which will be applied the next time this connection is established. A zero value for this object indicates that the SAP default, llcSapAdminMaxUnackedIPDUsRcv, shall be used. At connection setup, an implementation may choose to send this value to the remote LLC, using an XID frame. | 1.3.6.1.4.1.9.10.8.1.3.1.1.6 | INTEGER (0..127) | read-create | current |
| llcCcAdminMaxRetransmits OBJECT-TYPE This object denotes the value for the maximum number of times that this LLC shall retry PDUs following the expiration of the acknowledgement timer, the P-bit timer or the reject timer. When these retries are exhausted, the link shall be declared inactive. This count is referred to as 'N2' in the IEEE 802.2 specification [5]. This object contains an administrative value which will be applied the next time this connection is established. A zero value for this object indicates that the SAP default, llcSapAdminMaxRetransmits, shall be used. | 1.3.6.1.4.1.9.10.8.1.3.1.1.7 | Integer32 | read-create | current |
| llcCcAdminAckTimer OBJECT-TYPE This object denotes the value for the time interval during which this LLC shall expect to receive either: 1) an acknowledgement to one or more outstanding I PDUs. or 2) a response PDU to an unnumbered command PDU. The expiration of this timer shall cause the frame unacknowledged frames to be retransmitted (up to N2 times). This object contains an administrative value which will be applied the next time this connection is established. A zero value for this object indicates that the SAP default, llcSapAdminAckTimer, shall be used. | 1.3.6.1.4.1.9.10.8.1.3.1.1.8 | TimeTicks | read-create | current |
| llcCcAdminPbitTimer OBJECT-TYPE This object denotes the value for the time interval during which this LLC shall expect to receive a PDU with the F bit set to '1' in response to a Type 2 command with the P bit set to '1'. The expiration of this timer shall cause the REJ PDU to be retransmitted (up to N2 times). This object contains an administrative value which will be applied the next time this connection is established. A zero value for this object indicates that the SAP default, llcSapAdminPbitTimer, shall be used. | 1.3.6.1.4.1.9.10.8.1.3.1.1.9 | TimeTicks | read-create | current |
| llcCcAdminRejTimer OBJECT-TYPE This object denotes the value for the time interval during which this LLC shall expect to receive a reply to a REJ PDU. The expiration of this timer shall cause the REJ PDU to be retransmitted (up to N2 times). This object contains an administrative value which will be applied the next time this connection is established. A zero value for this object indicates that the SAP default, llcSapAdminRejTimer, shall be used. | 1.3.6.1.4.1.9.10.8.1.3.1.1.10 | TimeTicks | read-create | current |
| llcCcAdminBusyTimer OBJECT-TYPE This object denotes the value for the time interval during which this LLC shall expect to receive an indication that a busy condition at the remote LLC has cleared. The expiration of this timer shall cause the link to be declared inactive. This object contains an administrative value which will be applied the next time this connection is established. A zero value for this object indicates that the SAP default, llcSapAdminBusyTimer, shall be used. | 1.3.6.1.4.1.9.10.8.1.3.1.1.11 | TimeTicks | read-create | current |
| llcCcAdminInactTimer OBJECT-TYPE This object denotes the value for the time interval during which this LLC shall expect to receive any PDU from the remote LLC. This function is not described in the IEEE 802.2 specification [5] but is widely implemented. The expiration of this timer shall cause the local LLC to send a PDU to the remote LLC with the P bit set to '1'. This object contains an administrative value which will be applied the next time this connection is established. A zero value for this object indicates that the SAP default, llcSapAdminInactTimer, shall be used. Any value for this object less than or equal to the acknowledgement timer shall mean that the timer is not used. | 1.3.6.1.4.1.9.10.8.1.3.1.1.12 | TimeTicks | read-create | current |
| llcCcAdminDelayAckCount OBJECT-TYPE This object denotes the value for the maximum number of consecutive I PDUs which this LLC shall receive during the interval defined by llcCcOperDelayTimer without sending an immediate acknowledgement. This must be less than or equal to the value of llcCcOperMaxUnackIPDURcv. This function is not described in the IEEE 802.2 specification [5] but is widely implemented. This object contains an administrative value which will be applied the next time this connection is established. A zero value for this object indicates that the SAP default, llcSapAdminDelayAck, shall be used. A value of one indicates that acknowledgments will be sent immediately and that the value of llcCcAdminDelayAckTimer shall be ignored. | 1.3.6.1.4.1.9.10.8.1.3.1.1.13 | Integer32 | read-create | current |
| llcCcAdminDelayAckTimer OBJECT-TYPE This object denotes the value for the time interval during which this LLC shall delay acknowledgment of one or more I PDUs (up to the value of llcCcOperDelayAckCount). This function is not described in the IEEE 802.2 specification [5]. It is listed in the IBM Token-Ring Network Architecture Reference [6] as the T2 parameter and is widely implemented. The expiration of this timer shall cause the local LLC to acknowledge all unacknowledged I PDUs. This object contains an administrative value which will be applied the next time this connection is established. This object is associated with the llcCcAdminDelayAckCount object and is only defined if that object has a value greater than one. | 1.3.6.1.4.1.9.10.8.1.3.1.1.14 | TimeTicks | read-create | current |
| llcCcAdminNw OBJECT-TYPE This object denotes the value for the number of IPDUs that must be acknowledged before the working window size (Ww) can be incremented by 1 when the working window is not equal to the maximum transmit window size (TW). It controls the gradual incrementing of Ww in congestion situations. This function is not described in the IEEE 802.2 specification [5]. However, it is listed in the IBM Token-Ring Network Architecture Reference [6] as the Nw parameter and is widely implemented. | 1.3.6.1.4.1.9.10.8.1.3.1.1.15 | Integer32 | read-create | current |
| llcCcAdminRowStatus OBJECT-TYPE This object is used by a management station to create or delete the row entry in llcCcAdminTable following the RowStatus textual convention. Upon successful creation of the row, an agent automatically creates a corresponding entry in the llcCcOperTable with llcCcOperState equal to 'aDM (1)'. | 1.3.6.1.4.1.9.10.8.1.3.1.1.16 | RowStatus | read-create | current |
| llcCcOperTable OBJECT-TYPE This table contains current LLC link parameters. Many of these objects have corresponding objects in the llcCcAdminTable. | 1.3.6.1.4.1.9.10.8.1.3.2 | not-accessible | current | |
| llcCcOperEntry OBJECT-TYPE A list of status and control values for an LLC connection component. | 1.3.6.1.4.1.9.10.8.1.3.2.1 | not-accessible | current | |
| llcCcOperState OBJECT-TYPE This object describes the operational state of the LLC connection. If the connection component is disabled, llcCcOperState will transition to aDM(1). If the connection component is enabled, llcCcOperState will transition to normal(3). | 1.3.6.1.4.1.9.10.8.1.3.2.1.1 | INTEGER {aDM(1), setup(2), normal(3), busy(4), reject(5), await(6), awaitBusy(7), awaitReject(8), dConn(9), reset(10), error(11), conn(12), resetCheck(13), resetWait(14)} | read-only | current |
| llcCcOperMaxIPDUOctetsSend OBJECT-TYPE This object denotes the maximum I PDU size, in octets, that this LLC SAP may send to its remote connection component partner. This count is referred to as 'N1' in the IEEE 802.2 specification [5]. At connection setup, the remote LLC may send, using an XID frame, the maximum I PDU size which it is prepared to receive. If so, an implementation may choose to override the administered maximum PDU size with the dynamically learned value and should reflect that in this object. The I PDU size includes all octets in a frame, excluding framing characters, the MAC header and link header. | 1.3.6.1.4.1.9.10.8.1.3.2.1.2 | Integer32 | read-only | current |
| llcCcOperMaxIPDUOctetsRcv OBJECT-TYPE This object denotes the maximum I PDU size, in octets, that this LLC can expect to receive from its remote LLC partner. This count is referred to as 'N1' in the IEEE 802.2 specification [5] The I PDU size includes all octets in a frame with the exception of the framing characters, the MAC header and the link header. | 1.3.6.1.4.1.9.10.8.1.3.2.1.3 | Integer32 | read-only | current |
| llcCcOperMaxUnackedIPDUsSend OBJECT-TYPE This object denotes the maximum consecutive unacknowledged I PDU frames that this LLC may send to its remote LLC partner. This count is referred to as 'k' in the IEEE 802.2 specification [5]. At connection setup, the remote LLC may send, using an XID frame, the maximum number of unacknowledged I PDUs which it is prepared to receive. If so, an implementation may choose to override the administered maximum number of unacknowledged PDUs with the dynamically learned value and should reflect that in this object. | 1.3.6.1.4.1.9.10.8.1.3.2.1.4 | INTEGER (1..127) | read-only | current |
| llcCcOperMaxUnackedIPDUsRcv OBJECT-TYPE This object denotes the maximum number of unacknowledged I PDUs that this LLC can expect to receive from its remote LLC partner. This count is referred to as 'k' in the IEEE 802.2 specification [5]. | 1.3.6.1.4.1.9.10.8.1.3.2.1.5 | INTEGER (1..127) | read-only | current |
| llcCcOperMaxRetransmits OBJECT-TYPE This object denotes the value for the maximum number of times that this LLC shall retry PDUs following the expiration of the acknowledgement timer, the P-bit timer or the reject timer. When these retries are exhausted, the link shall be declared inactive. This count is referred to as 'N2' in the IEEE 802.2 specification [5]. | 1.3.6.1.4.1.9.10.8.1.3.2.1.6 | Integer32 | read-only | current |
| llcCcOperAckTimer OBJECT-TYPE This object denotes the value for the time interval during which this LLC shall expect to receive either: 1) an acknowledgement to one or more outstanding I PDUs. or 2) a response PDU to an unnumbered command PDU. The expiration of this timer shall cause the frame unacknowledged frames to be retransmitted (up to N2 times). | 1.3.6.1.4.1.9.10.8.1.3.2.1.7 | TimeTicks | read-only | current |
| llcCcOperPbitTimer OBJECT-TYPE This object denotes the value for the time interval during which this LLC shall expect to receive a PDU with the F bit set to '1' in response to a Type 2 command with the P bit set to '1'. The expiration of this timer shall cause the REJ PDU to be retransmitted (up to N2 times). | 1.3.6.1.4.1.9.10.8.1.3.2.1.8 | TimeTicks | read-only | current |
| llcCcOperRejTimer OBJECT-TYPE This object denotes the value for the time interval during which this LLC shall expect to receive a reply to a REJ PDU. The expiration of this timer shall cause the REJ PDU to be retransmitted (up to N2 times). | 1.3.6.1.4.1.9.10.8.1.3.2.1.9 | TimeTicks | read-only | current |
| llcCcOperBusyTimer OBJECT-TYPE This object denotes the value for the time interval during which this LLC shall expect to receive an indication that a busy condition at the remote LLC has cleared. The expiration of this timer shall cause the link to be declared inactive. | 1.3.6.1.4.1.9.10.8.1.3.2.1.10 | TimeTicks | read-only | current |
| llcCcOperInactTimer OBJECT-TYPE This object denotes the value for the time interval during which this LLC shall expect to receive any PDU from the remote LLC. This function is not described in the IEEE 802.2 specification [5] but is widely implemented. The expiration of this timer shall cause the local LLC to send a PDU to the remote LLC with the P bit set to '1'. Any value for this object less than or equal to the acknowledgement timer shall mean that the timer is not used. | 1.3.6.1.4.1.9.10.8.1.3.2.1.11 | TimeTicks | read-only | current |
| llcCcOperDelayAckCount OBJECT-TYPE This object denotes the value for the maximum number of consecutive I PDUs which this LLC shall receive during the interval defined by llcCcOperDelayTimer without sending an immediate acknowledgement. This must be less than or equal to the value of llcCcOperMaxUnackIPDURcv. This function is not described in the IEEE 802.2 specification [5] but is widely implemented. A value of one indicates that acknowledgments will be sent immediately and that the value of llcCcOperDelayAckTimer should be ignored. | 1.3.6.1.4.1.9.10.8.1.3.2.1.12 | Integer32 | read-only | current |
| llcCcOperDelayAckTimer OBJECT-TYPE This object denotes the value for the time interval during which this LLC shall delay acknowledgment of one or more I PDUs (up to the value of llcCcOperDelayAckCount). This function is not described in the IEEE 802.2 specification [5] but is widely implemented. The expiration of this timer shall cause the local LLC to acknowledge all unacknowledged I PDUs. This object is associated with the llcCcOperDelayAckCount object and only has meaning if that object has a value greater than one. | 1.3.6.1.4.1.9.10.8.1.3.2.1.13 | TimeTicks | read-only | current |
| llcCcOperNw OBJECT-TYPE This object denotes the value for the number of IPDUs that must be acknowledged before the working window size (Ww) can be incremented by 1 when the working window is not equal to the maximum transmit window size (TW). It controls the gradual incrementing of Ww in congestion situations. This function is not described in the IEEE 802.2 specification [5], but is widely implemented. | 1.3.6.1.4.1.9.10.8.1.3.2.1.14 | Integer32 | read-only | current |
| llcCcOperWw OBJECT-TYPE Maximum number of sequentially numbered IPDUs that the connection component may have outstanding (unacknowledged) at any given time. Ww is initialized to the value of llcCcOperMaxUnackedIPDUsSend when the link is established. When the dynamic window algorithm is invoked, Ww varies from 1 up to llcCcOperMaxUnackedIPDUsSend. Each time the llcCcOperWw value is decreased, the reason is recorded in llcCcOperLastWwCause, and llcCcStatWwCount is incremented by 1. This function is not described in the IEEE 802.2 specification [5], but is widely implemented. | 1.3.6.1.4.1.9.10.8.1.3.2.1.15 | INTEGER (1..127) | read-only | current |
| llcCcOperCreateTime OBJECT-TYPE This object describes the value of sysUpTime when this connection was created. | 1.3.6.1.4.1.9.10.8.1.3.2.1.16 | TimeStamp | read-only | current |
| llcCcOperLastModifyTime OBJECT-TYPE This object describes the value of sysUpTime the last time this connection component was modified. If the connection has not been modified, then this value shall be zero. | 1.3.6.1.4.1.9.10.8.1.3.2.1.17 | TimeStamp | read-only | current |
| llcCcOperLastFailTime OBJECT-TYPE This object describes the value of sysUpTime when this LLC connection component last failed. If the connection component has not failed, then this value shall be zero. | 1.3.6.1.4.1.9.10.8.1.3.2.1.18 | TimeStamp | read-only | current |
| llcCcOperLastFailCause OBJECT-TYPE This enumerated object reflects the cause of the last failure of this LLC connection component. If the connection component has not failed, then this object will have a value of undefined(1). | 1.3.6.1.4.1.9.10.8.1.3.2.1.19 | INTEGER {undefined(1), rxFRMR(2), txFRMR(3), discReceived(4), discSent(5), retriesExpired(6), forcedShutdown(7)} | read-only | current |
| llcCcOperLastFailFRMRInfo OBJECT-TYPE This object reflects the information field of the FRMR frame if the last failure for this LLC connection component was as a result of an invalid frame. Otherwise, this field has no meaning. | 1.3.6.1.4.1.9.10.8.1.3.2.1.20 | OCTET STRING (SIZE(3)) | read-only | current |
| llcCcOperLastWwCause OBJECT-TYPE This object indicates the reason that the llcCcOperWw was reduced the last time this occurred. | 1.3.6.1.4.1.9.10.8.1.3.2.1.21 | INTEGER {neverInvoked(1), lostData(2), macLayerCongestion(3), other(4)} | read-only | current |
| llcCcStatsTable OBJECT-TYPE Each entry in this table contains statistics for a specific LLC connection component. | 1.3.6.1.4.1.9.10.8.1.3.3 | not-accessible | current | |
| llcCcStatsEntry OBJECT-TYPE A list of statistics for an LLC connection component. | 1.3.6.1.4.1.9.10.8.1.3.3.1 | not-accessible | current | |
| llcCcStatsLocalBusies OBJECT-TYPE This object reflects the total number of times that the local connection component has entered a busy state (RNR). This object is initialized to zero when the connection component is created. | 1.3.6.1.4.1.9.10.8.1.3.3.1.1 | Counter32 | read-only | current |
| llcCcStatsRemoteBusies OBJECT-TYPE This object reflects the total number of times that the adjacent (i.e. remote) connection component has entered a busy state (RNR). This object is initialized to zero when the connection component is created. | 1.3.6.1.4.1.9.10.8.1.3.3.1.2 | Counter32 | read-only | current |
| llcCcStatsIFramesIn OBJECT-TYPE This object reflects the total number of I-Frames that have been received by the connection component. This object is initialized to zero when the connection component is created. | 1.3.6.1.4.1.9.10.8.1.3.3.1.3 | Counter32 | read-only | current |
| llcCcStatsIFramesOut OBJECT-TYPE This object reflects the total number of I-Frames that have been transmitted by this connection component. This object is initialized to zero when the connection component is created. | 1.3.6.1.4.1.9.10.8.1.3.3.1.4 | Counter32 | read-only | current |
| llcCcStatsIOctetsIn OBJECT-TYPE This object reflects the total octets received from the adjacent connection component. This object covers the address, control, and information field of I-Frames only. This object is initialized to zero when the connection component is created. | 1.3.6.1.4.1.9.10.8.1.3.3.1.5 | Counter32 | read-only | current |
| llcCcStatsIOctetsOut OBJECT-TYPE This object reflects the total octets transmitted to the adjacent connection component. This object covers the address, control, and information field of I-Frames only. This object is initialized to zero when the connection component is created. | 1.3.6.1.4.1.9.10.8.1.3.3.1.6 | Counter32 | read-only | current |
| llcCcStatsSFramesIn OBJECT-TYPE This object reflects the total number of S-Frames that have been received by this connection component. This object is initialized to zero when the connection component is created. Note - the ratio of the number of I-Frames to S-Frames might serve as a measure of link efficiency and, for instance, could be used to tune the acknowledgement timer. | 1.3.6.1.4.1.9.10.8.1.3.3.1.7 | Counter32 | read-only | current |
| llcCcStatsSFramesOut OBJECT-TYPE This object reflects the total number of S-Frames that have been transmitted by this connection component. This object is initialized to zero when the connection component is created. Note - the ratio of the number of I-Frames to S-Frames might serve as a measure of link efficiency and, for instance, could be used to tune the acknowledgement timer. | 1.3.6.1.4.1.9.10.8.1.3.3.1.8 | Counter32 | read-only | current |
| llcCcStatsRetransmitsOut OBJECT-TYPE This object reflects the total number of I-Frames retransmitted the local connection component. This object is initialized to zero when the connection component is created. | 1.3.6.1.4.1.9.10.8.1.3.3.1.9 | Counter32 | read-only | current |
| llcCcStatsREJsIn OBJECT-TYPE This object reflects the total REJ frames received from an adjacent LLC connection component since connection component startup. | 1.3.6.1.4.1.9.10.8.1.3.3.1.10 | Counter32 | read-only | current |
| llcCcStatsREJsOut OBJECT-TYPE This object reflects the total REJ frames transmitted to an adjacent LLC connection component since connection component startup. | 1.3.6.1.4.1.9.10.8.1.3.3.1.11 | Counter32 | read-only | current |
| llcCcStatsWwCount OBJECT-TYPE This object reflects the total number of times, since connection component startup, that the dynamic window algorithm has been invoked to reduce the value of Ww. At connection component startupm this object must be initialized to zero. This function is not described in the IEEE 802.2 specification [5], but is widely implemented. | 1.3.6.1.4.1.9.10.8.1.3.3.1.12 | Counter32 | read-only | current |
| snaLlcMIBNotificationPrefix OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.8.2 | |||
| snaLlcMIBNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.8.2.0 | |||
| snaLlcMIBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.8.3 | |||
| snaLlcMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.8.3.1 | |||
| snaLlcMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.8.3.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| llcCcStatusChange NOTIFICATION-TYPE This trap indicates that the state of an LLC connection component has transitioned to normal(3) or aDM(1). | 1.3.6.1.4.1.9.10.8.2.0.1 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| llcCoreCompliance MODULE-COMPLIANCE The core compliance statement for all LLC nodes. | 1.3.6.1.4.1.9.10.8.3.1.1 | current |
| llcCorePortGroup OBJECT-GROUP The llcCorePortGroup defines objects which are common to the LLC Port of all compliant connections. | 1.3.6.1.4.1.9.10.8.3.2.1 | current |
| llcCoreSapGroup OBJECT-GROUP The llcCoreSapGroup defines objects which are common to the LLC SAP of all compliant connections. | 1.3.6.1.4.1.9.10.8.3.2.2 | current |
| llcCoreCcGroup OBJECT-GROUP The llcCoreCcGroup defines objects which are common to the LLC CC of all compliant connections. | 1.3.6.1.4.1.9.10.8.3.2.3 | current |