CISCO-SIBU-STACKABLE-DUAL-SPEED-HUB-MIB
- Registered at
- 1.3.6.1.4.1.9.10.44
- Last updated
- 1998-10-23 00:00
- Organization
- Cisco Systems Inc.
- Revisions
- 1998-10-23 00:00
- Namespace
- cisco
- Source file
CISCO-SIBU-STACKABLE-DUAL-SPEED-HUB-MIB- Digest
sha256:e5c314a070205547007b9f6e8d1cd5d3f075721e4d54ed6f87188c5898a369eb
Description
The MIB module that extends the REPEATER-MIB to manage CISCO low end stackable repeater products. For the purpose of this mib, a hub is a repeater group and stack is collection of one or more hubs interconnected via stack bus connectors.
Contact
Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-sibu@cisco.com
Imports
| From | Symbols |
|---|---|
| CISCO-SMI | ciscoExperiment |
| SNMP-REPEATER-MIB | rptrGroupIndex, rptrPortGroupIndex, rptrPortIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCO-SIBU-STACKABLE-DUAL-SPEED-HUB-MIB CISCO-SMI IANAifType-MIB IF-MIB SNMP-REPEATER-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| HubNumber TEXTUAL-CONVENTION Represents the hub number that the system supports for stacking. The hub number represents the order in which a hub is stacked relative to other members of the stack. Lowest hub number represents the top member of the stack. This is also the number used in the command line interface. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ciscoSibuStackableDualSpeedHubMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.44.1 | |||
| cssSystem OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.44.1.1 | |||
| cssSystemLinkTraps OBJECT-TYPE Indicates whether the stack is permitted to generate linkUp/linkDown traps for both repeater port and switch module's port. The stack provides only a single global control of link traps in contrast to per interface control provided by IF-MIB. The value of all instances ifLinkUpDownTrapEnable is set to TRUE (FALSE) if this object is set to enabled (disabled). The object ifLinkUpDownTrapEnable is read-only. A linkUp/linkDown trap is generated whenever a port's link STATUS or administrative status changes. | 1.3.6.1.4.1.9.10.44.1.1.1 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| cssGroup OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.44.1.2 | |||
| cssGroupTable OBJECT-TYPE A list of member hubs in the stack. | 1.3.6.1.4.1.9.10.44.1.2.1 | not-accessible | current | |
| cssGroupEntry OBJECT-TYPE Configuration parameters for an individual hub. An entry is created by default for the master unit in the stack. A entry is created (removed) when a hub is connected to (removed from) the stack. | 1.3.6.1.4.1.9.10.44.1.2.1.1 | not-accessible | current | |
| cssGroupID OBJECT-TYPE The hub identifier of unit in a stack. | 1.3.6.1.4.1.9.10.44.1.2.1.1.1 | HubNumber | read-only | current |
| cssGroupType OBJECT-TYPE The model type of the hub unit | 1.3.6.1.4.1.9.10.44.1.2.1.1.2 | INTEGER {cisco1538MDS(1), cisco1538UDS(2), wsC412M(3), wsC412(4), wsC424M(5), wsC424(6)} | read-only | current |
| cssGroupSerialNo OBJECT-TYPE Serial number of the hardware. | 1.3.6.1.4.1.9.10.44.1.2.1.1.4 | DisplayString (SIZE(0..20)) | read-only | current |
| cssGroupBoardRevision OBJECT-TYPE Hardware version of the repeater board. | 1.3.6.1.4.1.9.10.44.1.2.1.1.5 | Integer32 (0..2147483647) | read-only | current |
| cssGroupAgentBootVersion OBJECT-TYPE Returns the version number of the dual-speed hub BOOT software residing in flash. The format is 'V1.2.3'. | 1.3.6.1.4.1.9.10.44.1.2.1.1.6 | DisplayString (SIZE(0..8)) | read-only | current |
| cssGroupAgentFirmwareVersion OBJECT-TYPE Returns the version number of the dual-speed hub firmware residing in flash. The format is 'V1.2.3'. | 1.3.6.1.4.1.9.10.44.1.2.1.1.7 | DisplayString (SIZE(0..8)) | read-only | current |
| cssGroupAgentStatus OBJECT-TYPE Status of this hub agent. Each stack allows only one SNMP primary agent. notPresent(1): The hub does not have an agent. primary(2): The agent of this hub is a primary agent. backup(3) : The agent of this hub is a backup agent. | 1.3.6.1.4.1.9.10.44.1.2.1.1.8 | INTEGER {notPresent(1), primary(2), backup(3)} | read-only | current |
| cssGroupAgentPhysAddress OBJECT-TYPE MAC address of this hub's agent | 1.3.6.1.4.1.9.10.44.1.2.1.1.9 | PhysAddress | read-only | current |
| cssGroupInternalPowerState OBJECT-TYPE Indicates the state of the internal power supply. off : The internal power supply is off. on : The internal power supply is on. | 1.3.6.1.4.1.9.10.44.1.2.1.1.12 | INTEGER {off(1), on(2)} | read-only | current |
| cssGroupRedundantPowerState OBJECT-TYPE Indicates the state of the external/backup power supply. off : the switch is not connected to a redundant power source. healthy : a redundant power source is connected to the switch and the power source is operating correctly. faulty : a redundant power source is connected to the switch but a failure exists in the power system. | 1.3.6.1.4.1.9.10.44.1.2.1.1.13 | INTEGER {off(1), healthy(2), faulty(3)} | read-only | current |
| cssGroupReset OBJECT-TYPE Setting this object to reset(2) causes a complete reset of both hardware and software, but does not run the POST (Power On Self Test). Setting this object to noReset(1) has no effect. The switch always returns the value noReset(1) when this object is read. | 1.3.6.1.4.1.9.10.44.1.2.1.1.14 | INTEGER {noReset(1), reset(2)} | read-write | current |
| cssGroupConfigDefaultReset OBJECT-TYPE Setting this object to reset(2) causes a complete reset of both hardware and software, but does not run the POST (Power On Self Test). All configuration parameters will revert to their factory default settings. Setting this object to noReset(1) has no effect. The switch always returns the value noReset(1) when this object is read. | 1.3.6.1.4.1.9.10.44.1.2.1.1.15 | INTEGER {noReset(1), reset(2)} | read-write | current |
| cssGroupIsolatedState OBJECT-TYPE Setting this object to isolated(1) causes this hub to be isolated from the back plane bus. Setting this object to attached(2) causes this hub to be attached to the back plane bus. | 1.3.6.1.4.1.9.10.44.1.2.1.1.16 | INTEGER {isolated(1), attached(2)} | read-write | current |
| cssRepeaterPort OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.44.1.3 | |||
| cssRepeaterPortTable OBJECT-TYPE The list of repeater port configurations on each hub unit. | 1.3.6.1.4.1.9.10.44.1.3.1 | not-accessible | current | |
| cssRepeaterPortEntry OBJECT-TYPE Configuration parameters for an individual repeater port on a hub. The value of rptrPortIndex also indicates the physical port number of the port in the hub. An entry is created for each repeater port in a hub when the hub is connected to the stack. The corresponding entries are removed when the hub is removed from the stack. | 1.3.6.1.4.1.9.10.44.1.3.1.1 | not-accessible | current | |
| cssRepeaterPortName OBJECT-TYPE A descriptive string of up to 20 characters used by the network administrator to name a port. | 1.3.6.1.4.1.9.10.44.1.3.1.1.1 | DisplayString (SIZE(0..20)) | read-write | current |
| cssRepeaterPortControllerRevision OBJECT-TYPE Returns the revision number of the port controller. | 1.3.6.1.4.1.9.10.44.1.3.1.1.2 | Integer32 (0..2147483647) | read-only | current |
| cssRepeaterPortSpeedAdmin OBJECT-TYPE Set to tenMbps(1) to operate in 10Mbps speed mode. Set to oneHundredMbps(2) to operate in 100Mbps speed mode. Set to autoNegotiate(3) to allow the switch to negotiate with the other end of the connection. The actual operating speed of the port is given by cssRepeaterPortSpeedStatus. | 1.3.6.1.4.1.9.10.44.1.3.1.1.3 | INTEGER {tenMbps(1), oneHundredMbps(2), autoNegotiate(3)} | read-write | current |
| cssRepeaterPortSpeedStatus OBJECT-TYPE The operating speed of the port. | 1.3.6.1.4.1.9.10.44.1.3.1.1.4 | INTEGER {tenMbps(1), oneHundredMbps(2)} | read-write | current |
| cssRepeaterPortLinkStatus OBJECT-TYPE The current port link status. | 1.3.6.1.4.1.9.10.44.1.3.1.1.5 | INTEGER {link(1), noLink(2)} | read-only | current |
| cssSwitchPort OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.44.1.4 | |||
| cssSwitchPortTable OBJECT-TYPE A list of switched ports on extension module on a each hub unit in the stack. | 1.3.6.1.4.1.9.10.44.1.4.1 | not-accessible | current | |
| cssSwitchPortEntry OBJECT-TYPE Configuration parameters for an individual switch module port. An entry is created for each switch port on a module is inserted into a hub in the stack. The corresponding entries are removed when the module is removed from the hub in the stack, or if the hub is removed from the stack. | 1.3.6.1.4.1.9.10.44.1.4.1.1 | not-accessible | current | |
| cssSwitchPortModuleID OBJECT-TYPE Unique ID number of a module unit in a hub as used in the command line interface. | 1.3.6.1.4.1.9.10.44.1.4.1.1.1 | Integer32 (1..2147483647) | read-only | current |
| cssSwitchPortPortID OBJECT-TYPE The unique ID identifying a port on an extension module on a hub as used in the command line interface. | 1.3.6.1.4.1.9.10.44.1.4.1.1.2 | Integer32 (1..2147483647) | read-only | current |
| cssSwitchPortName OBJECT-TYPE A descriptive string of up to 20 characters used by the network administrator to name a switch port. | 1.3.6.1.4.1.9.10.44.1.4.1.1.3 | DisplayString (SIZE(0..20)) | read-write | current |
| cssSwitchPortType OBJECT-TYPE Type of switch module in this hub. | 1.3.6.1.4.1.9.10.44.1.4.1.1.4 | INTEGER {wsX4001(1), wsX4002(2)} | read-only | current |
| cssSwitchPortControllerRevision OBJECT-TYPE The revision number of the port controller. | 1.3.6.1.4.1.9.10.44.1.4.1.1.5 | Integer32 (0..2147483647) | read-only | current |
| cssSwitchPortState OBJECT-TYPE Setting this object to enabled(1) enables the port. Setting this object to disabled(2) disables the port. | 1.3.6.1.4.1.9.10.44.1.4.1.1.6 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| cssSwitchPortDuplexAdmin OBJECT-TYPE Set to fullDuplex(1) to operate in full duplex mode: port will allow simultaneous transmit and receive which can double its bandwidth. Set to halfDuplex(2) to operate in normal mode. Set to autoNegotiate(3) to allow the switch to negotiate the duplex status with the other end of the connection. | 1.3.6.1.4.1.9.10.44.1.4.1.1.7 | INTEGER {fullDuplex(1), halfDuplex(2), autoNegotiate(3)} | read-write | current |
| cssSwitchPortDuplexStatus OBJECT-TYPE The operating duplex mode of the switched port. | 1.3.6.1.4.1.9.10.44.1.4.1.1.8 | INTEGER {fullDuplex(1), halfDuplex(2)} | read-only | current |
| cssSwitchPortSpeedAdmin OBJECT-TYPE Set to tenMbps(1) to operate in 10Mbps speed mode. Set to oneHundredMbps(2) to operate in 100Mbps speed mode. Set to autoNegotiate(3) to allow the switch to negotiate the operating speed with the other end of the connection. If the value of object cssSwitchPortType is WS-X4002(2), this object will be read-only, because FX module only supports 100Mbps speed. | 1.3.6.1.4.1.9.10.44.1.4.1.1.9 | INTEGER {tenMbps(1), oneHundredMbps(2), autoNegotiate(3)} | read-write | current |
| cssSwitchPortSpeedStatus OBJECT-TYPE The operating speed of the switched port. | 1.3.6.1.4.1.9.10.44.1.4.1.1.10 | INTEGER {tenMbps(1), oneHundredMbps(2)} | read-only | current |
| cssSwitchPortLinkStatus OBJECT-TYPE Indicates the link STATUS of switch port. | 1.3.6.1.4.1.9.10.44.1.4.1.1.11 | INTEGER {link(1), noLink(2)} | read-only | current |
| ciscoSibuStackableDualSpeedHubNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.44.2 | |||
| ciscoSibuStackableDualSpeedHubNotificationsPrefix OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.44.2.0 | |||
| ciscoSibuStackableDualSpeedHubMIBComformance OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.44.3 | |||
| ciscoSibuStackableDualSpeedHubMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.44.3.1 | |||
| ciscoSibuStackableDualSpeedHubMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.44.3.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| ciscoSibuStackableDualSpeedHubRptrPortLinkChange NOTIFICATION-TYPE This trap is generated whenever the value of cssRepeaterPortLinkStatus changes for a repeater port. | 1.3.6.1.4.1.9.10.44.2.0.1 | current |
| ciscoSibuStackableDualSpeedHubSwitchPortLinkChange NOTIFICATION-TYPE This trap is generated whenever the value of cssSwitchPortLinkStatus changes for a switch port on an extension module. | 1.3.6.1.4.1.9.10.44.2.0.2 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| ciscoSibuStackableDualSpeedHubCompliance MODULE-COMPLIANCE The compliance statement for the Cisco Stackable Dual-Speed Hub products. | 1.3.6.1.4.1.9.10.44.3.1.1 | current |
| ciscoSibuStackableDualSpeedHubGroup OBJECT-GROUP A collection of group objects for use with the Cisco Stackable Dual-Speed Hub products. | 1.3.6.1.4.1.9.10.44.3.2.1 | current |
| ciscoSibuStackableDualSpeedHubRepeaterPortGroup OBJECT-GROUP A collection of repeater port objects for use with the Cisco Stackable Dual-Speed Hub products. | 1.3.6.1.4.1.9.10.44.3.2.2 | current |
| ciscoSibuStackableDualSpeedHubSwitchPortGroup OBJECT-GROUP A collection of switch module port objects for use with the Cisco Stackable Dual-Speed Hub products. | 1.3.6.1.4.1.9.10.44.3.2.3 | current |