MIBs Depot

CISCO-RHINO-MIB

Registered at
1.3.6.1.4.1.9.5.11
Last updated
2001-03-29 00:00
Organization
Cisco Systems, Inc.
Revisions
2001-03-29 00:00, 2001-02-15 00:00, 2000-07-20 00:00, 2000-04-11 00:00, 2000-02-07 00:00, 1999-11-30 00:00, 1999-10-04 00:00, 1999-06-29 00:00, 1999-06-17 00:00, 1999-03-12 00:00, 1998-12-02 00:00, 1998-10-26 00:00, 1998-07-13 00:00, 1997-11-20 00:00, 1997-07-22 00:00, 1997-02-04 00:00, 1996-10-02 00:00, 1995-10-02 00:00
Namespace
cisco
Source file
CISCO-RHINO-MIB
Digest
sha256:4a63b5db82d0ce0a52e42ca79a6b94219e182e48f7725d5c16b7d0fb9a396008

Description

-Added enum sixPortDS3 for ciscoLS1010SubModuleType. -Added enum nodeSwitchProcessor2ndGeneration for ciscoLS1010ModuleType. -Added enum ac175W for psType. -Added Group object for Notification objects.

Contact

Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-atm@cisco.com

Imports

FromSymbols
CISCO-SMIworkgroup
CISCO-TCUnsigned32
IF-MIBInterfaceIndex, ifIndex
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION, TimeStamp, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

CISCO-RHINO-MIB
CISCO-SMI
CISCO-TC
IANAifType-MIB
IF-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
AdminStatus
TEXTUAL-CONVENTION
Admin status of a chassis component.
current
Led
TEXTUAL-CONVENTION
LED status
current
OperStatus
TEXTUAL-CONVENTION
Operational status of a chassis component. fanAlarm(4) is only applicable to the C5500 power supply. A fault(3) supercedes a fanAlarm(4). partialFault(5) & empty(6) are used by the Cisco6400 for the fan status to indicate partial fans failure & fan not present. A fault(3) value indicates total fans failure in the C6400.
current
PcmciaType
TEXTUAL-CONVENTION
PCMCIA card type
current
PsType
TEXTUAL-CONVENTION
Power Supply type
current

Objects

NameOIDSyntaxAccessStatus
ciscoLS1010ChassisMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.9.5.11.1
ciscoLS1010ChassisGroup
OBJECT-IDENTITY
1.3.6.1.4.1.9.5.11.1.1
ciscoLS1010ChassisSysType
OBJECT-TYPE
The chassis system type.
1.3.6.1.4.1.9.5.11.1.1.1INTEGER {other(1), ls1010(2), c8510(3), cisco6400(4), c8540(5), tgx8750(6), wsx6302(7), c2948g(8), c4908g(9)}read-onlycurrent
ciscoLS1010ChassisBkplType
OBJECT-TYPE
The chassis backplane type.
1.3.6.1.4.1.9.5.11.1.1.2INTEGER {other(1), atm(2), c5500(3), cisco6400(4), c8510(5), c8540(6), tgx8750(7), cat6000(8), c2948g(9), c4908g(10)}read-onlycurrent
ciscoLS1010ChassisPs0Type
OBJECT-TYPE
Type of power supply number 1.
1.3.6.1.4.1.9.5.11.1.1.3PsTyperead-onlycurrent
ciscoLS1010ChassisPs0AdminStatus
OBJECT-TYPE
Enable or disable power supply 1.
1.3.6.1.4.1.9.5.11.1.1.4AdminStatusread-writecurrent
ciscoLS1010ChassisPs0Status
OBJECT-TYPE
Status of power supply number 1.
1.3.6.1.4.1.9.5.11.1.1.5OperStatusread-onlycurrent
ciscoLS1010ChassisPs0Led
OBJECT-TYPE
LED Status of power supply number 1.
1.3.6.1.4.1.9.5.11.1.1.6Ledread-onlycurrent
ciscoLS1010ChassisPs1Type
OBJECT-TYPE
Type of power supply number 2.
1.3.6.1.4.1.9.5.11.1.1.7PsTyperead-onlycurrent
ciscoLS1010ChassisPs1AdminStatus
OBJECT-TYPE
Enable or disable power supply 2.
1.3.6.1.4.1.9.5.11.1.1.8AdminStatusread-writecurrent
ciscoLS1010ChassisPs1Status
OBJECT-TYPE
Status of power supply number 2.
1.3.6.1.4.1.9.5.11.1.1.9OperStatusread-onlycurrent
ciscoLS1010ChassisPs1Led
OBJECT-TYPE
LED Status of power supply number 2.
1.3.6.1.4.1.9.5.11.1.1.10Ledread-onlycurrent
ciscoLS1010ChassisFanStatus
OBJECT-TYPE
Status of the chassis fan.
1.3.6.1.4.1.9.5.11.1.1.11OperStatusread-onlycurrent
ciscoLS1010ChassisFanLed
OBJECT-TYPE
LED Status of fan.
1.3.6.1.4.1.9.5.11.1.1.12Ledread-onlycurrent
ciscoLS1010ChassisCardStatusLed
OBJECT-TYPE
LED Status of CPU card.
1.3.6.1.4.1.9.5.11.1.1.13Ledread-onlycurrent
ciscoLS1010ChassisEnetLinkLed
OBJECT-TYPE
Ethernet link status LED of CPU card.
1.3.6.1.4.1.9.5.11.1.1.14Ledread-onlycurrent
ciscoLS1010Chassis12VoltStatus
OBJECT-TYPE
The chassis 12V status.
1.3.6.1.4.1.9.5.11.1.1.15INTEGER {ok(1), outOfTolerance(2), unknown(3)}read-onlycurrent
ciscoLS1010ChassisTempStatus
OBJECT-TYPE
The chassis temperature status. The values of minorWarning(3), majorWarning(4) and criticalWarning(5) will be primarily used by C6400 to indicate the core temperature. C6400 will never report overTemperature(2) status. In C6400 there are two temperature sensors: core and inlet. C6400 use this object to represent the core temperature and the other object ciscoLS1010ChassisInletTempStatus to represent the inlet temperature.
1.3.6.1.4.1.9.5.11.1.1.16INTEGER {ok(1), overTemperature(2), minorWarning(3), majorWarning(4), criticalWarning(5)}read-onlycurrent
ciscoLS1010ChassisPcmciaSlot0Type
OBJECT-TYPE
Type of PCMCIA slot 0 type.
1.3.6.1.4.1.9.5.11.1.1.17PcmciaTyperead-onlycurrent
ciscoLS1010ChassisPcmciaSlot1Type
OBJECT-TYPE
Type of PCMCIA slot 1 type.
1.3.6.1.4.1.9.5.11.1.1.18PcmciaTyperead-onlycurrent
ciscoLS1010ChassisNumSlots
OBJECT-TYPE
The number of slots in the chassis for plug-in modules.
1.3.6.1.4.1.9.5.11.1.1.19INTEGER (1..16)read-onlycurrent
ciscoLS1010ChassisLastChange
OBJECT-TYPE
The last time chassis physical content get changed.
1.3.6.1.4.1.9.5.11.1.1.20TimeStampread-onlycurrent
ciscoLS1010ChassisFailureAction
OBJECT-TYPE
The action to take when there is any chassis failure, which includes either power supply, voltage, temperature and fan failure.
1.3.6.1.4.1.9.5.11.1.1.21INTEGER {nothing(1), sendTrap(2), shutdown(3), sendTrapAndShutdown(4)}read-writecurrent
ciscoLS1010ChassisChangeAction
OBJECT-TYPE
The action to take when there is any chassis change, which includes either power supply, fan and boards.
1.3.6.1.4.1.9.5.11.1.1.22INTEGER {nothing(1), sendTrap(2)}read-writecurrent
ciscoLS1010ChassisClockingMode
OBJECT-TYPE
The clocking mode of the ls1010 system. By default, the mode is non-revertive, which means that the clock will stick to the current priority, even though higher priority clock is available.
1.3.6.1.4.1.9.5.11.1.1.23INTEGER {revertive(1), nonRevertive(2)}read-writecurrent
ciscols1010SystemClockSourceStatus
OBJECT-TYPE
The network clock source status of 'system' source: 'notSelected' indicates 'system' not selected as the network clock source. 'selected' indicates ASP freerunning(system) is selected as network clock source.
1.3.6.1.4.1.9.5.11.1.1.24INTEGER {notSelected(1), selected(2)}read-onlycurrent
ciscols1010SystemClockSourcePriority
OBJECT-TYPE
The highest priority at which 'system' is configured as a network clock source.
1.3.6.1.4.1.9.5.11.1.1.25INTEGER {priority1(1), priority2(2), priority3(3), priority4(4), priority5(5)}read-writecurrent
ciscoLS1010ChassisInletTempStatus
OBJECT-TYPE
C6400 has two temperature sensors: core and inlet. C6400 use this object to represent the inlet temperature and use the object ciscoLS1010ChassisTempStatus to represent the core temperature.
1.3.6.1.4.1.9.5.11.1.1.26INTEGER {ok(1), overTemperature(2), minorWarning(3), majorWarning(4), criticalWarning(5), unknown(6)}read-onlycurrent
ciscoLS1010ModuleGroup
OBJECT-IDENTITY
1.3.6.1.4.1.9.5.11.1.2
ciscoLS1010ModuleTable
OBJECT-TYPE
A list of module entries. The number of entries is given by the value of ciscoLS1010ChassisNumSlots.
1.3.6.1.4.1.9.5.11.1.2.1not-accessiblecurrent
ciscoLS1010ModuleEntry
OBJECT-TYPE
Entry containing information about one module in a slot of the chassis.
1.3.6.1.4.1.9.5.11.1.2.1.1not-accessiblecurrent
ciscoLS1010ModuleIndex
OBJECT-TYPE
A unique value for each module.
1.3.6.1.4.1.9.5.11.1.2.1.1.1INTEGER (0..15)not-accessiblecurrent
ciscoLS1010ModuleType
OBJECT-TYPE
The type of module.
1.3.6.1.4.1.9.5.11.1.2.1.1.2INTEGER {other(1), carrier(2), cpuSwitchAndFeature(3), cpuSwitchAndFeaturePFQ(4), superCarrier(5), cpuRoute(6), switch10GAndFC(7), switch10GNoFC(8), atmFabricIntegration(9), dualSlot(10), cmpmCarrier(11), tsCarrier(12), nodeSwitchProcessor2ndGeneration(13)}read-onlycurrent
ciscoLS1010ModuleSerialNumber
OBJECT-TYPE
The serial number of the module. Deprecated in favor of object ciscoLS1010ModuleSerialNumberString. This object returns 0 for modules using an alphanumeric numbering scheme.
1.3.6.1.4.1.9.5.11.1.2.1.1.3Integer32read-onlydeprecated
ciscoLS1010ModuleHwVersion
OBJECT-TYPE
The hardware version of the module.
1.3.6.1.4.1.9.5.11.1.2.1.1.4Integer32read-onlycurrent
ciscoLS1010ModuleSwVersion
OBJECT-TYPE
The software version number.
1.3.6.1.4.1.9.5.11.1.2.1.1.5Integer32read-onlycurrent
ciscoLS1010ModuleDescr
OBJECT-TYPE
A descriptive string used by the agent to describe the module.
1.3.6.1.4.1.9.5.11.1.2.1.1.6DisplayStringread-onlycurrent
ciscoLS1010ModuleNumSubModules
OBJECT-TYPE
The max number of sub-modules supported by this module.
1.3.6.1.4.1.9.5.11.1.2.1.1.7INTEGER (0..255)read-onlycurrent
ciscoLS1010ModuleAdminStatus
OBJECT-TYPE
This object, when read, always returns a value of ok(1). Setting this object to one of the acceptable values gives the following results: reset: reset the module's control logic enable: enable the module disable: disable the module Setting this object to any other values results in an error.
1.3.6.1.4.1.9.5.11.1.2.1.1.8AdminStatusread-writecurrent
ciscoLS1010ModuleOperStatus
OBJECT-TYPE
Operational status of the module.
1.3.6.1.4.1.9.5.11.1.2.1.1.9OperStatusread-onlycurrent
ciscoLS1010ModuleHwVersionMinor
OBJECT-TYPE
The minor hardware version of the module.
1.3.6.1.4.1.9.5.11.1.2.1.1.10Unsigned32read-onlycurrent
ciscoLS1010ModuleSerialNumberString
OBJECT-TYPE
The serial number of the module.
1.3.6.1.4.1.9.5.11.1.2.1.1.11DisplayStringread-onlycurrent
ciscoLS1010SubModuleGroup
OBJECT-IDENTITY
1.3.6.1.4.1.9.5.11.1.3
ciscoLS1010SubModuleTable
OBJECT-TYPE
A list of sub-module entries. The number of entries is given by the value of ciscoLS1010SlotNumSubModules.
1.3.6.1.4.1.9.5.11.1.3.1not-accessiblecurrent
ciscoLS1010SubModuleEntry
OBJECT-TYPE
Entry containing information about one sub-module in a sub-slot of the module.
1.3.6.1.4.1.9.5.11.1.3.1.1not-accessiblecurrent
ciscoLS1010SubModuleIndex
OBJECT-TYPE
A unique value for each sub-module within the module. This value is determined by sub-slot number where the sub-module is inserted.
1.3.6.1.4.1.9.5.11.1.3.1.1.1INTEGER (0..15)not-accessiblecurrent
ciscoLS1010SubModuleType
OBJECT-TYPE
The type of sub-module.
1.3.6.1.4.1.9.5.11.1.3.1.1.2INTEGER {other(1), oc3Utp5(2), oc3SingleModeFiber(3), oc3MultiModeFiber(4), oc12SingleModeFiber(5), oc12MultiModeFiber(6), ds3(7), e3(8), cpuSwitch(9), featureFpga(10), featureAsic(11), t1(12), e1(13), e1bnc(14), oc3Mixed(15), cbrt1(16), cbr120e1(17), cbr75e1(18), quadDs3(19), quadE3(20), dualDs3(21), dualE3(22), oc12Mixed(23), atm25(24), featurePVC(25), routerProcessorAlpha(26), dualOC3SingleModeIRFiber(27), dualOC3MultiModeIRFiber(28), routerProcessorBeta(29), fratm1CT3(30), fratm4CE1(31), oc3SingleModeLRFiber(35), oc12SingleModeLRFiber(36), sixPortDS3(37), feUTP8p16k(40), feUTP8p64k(41), feMMF8p16k(42), feMMF8p64k(43), feUTP16p16k(44), feUTP16p64k(45), feMMF16p16k(46), feMMF16p64k(47), geF1p16k(48), geF1p64k(49), geF2p16k(50), geF2p64k(51), feBridge4p(52), feUTP8p16kFullDup(53), feUTP8p64kFullDup(54), routeProc(55), switch10GProc(56), featureNetClock(57), featureABR(58), geF8p64k(59), featureLite(60), s16pOC3MM(61), s16pOC3SM(62), s4pOC12MM(63), s4pOC12SM(64), atmIma8pT1(65), atmIma8pE1(66), atm25m4p(67), s1pOC48cSM(68), s1pOC48cSMLR(69), atmFIMBridge(70), atmFIMoc12MM(71), arm1p64k(80), arm2p64k(81), xpif1pGE16k(82), xpif1pGE64k(83), xpif1pGE256k(84), xpifAtm1pOC12SMIR64k(85), xpifAtm1pOC12SMIR256k(86), xpifAtm1pOC12MM64k(87), xpifAtm1pOC12MM256k(88), xpifAtm1pOC3SMIR64k(89), xpifAtm1pOC3SMIR256k(90), xpifAtm1pOC3MM64k(91), xpifAtm1pOC3MM256k(92), xpifPos1pOC12SMIR64k(93), xpifPos1pOC12SMIR256k(94), xpifPos1pOC12SMLR64k(95), xpifPos1pOC12SMLR256k(96), xpifArm2p256k(97), aclDaughter(98)}read-onlycurrent
ciscoLS1010SubModuleSerialNumber
OBJECT-TYPE
The serial number of the sub-module. Deprecated in favor of object ciscoLS1010SubModuleSerialNumberString. This object returns 0 for submodules using an alphanumeric numbering scheme.
1.3.6.1.4.1.9.5.11.1.3.1.1.3Integer32read-onlydeprecated
ciscoLS1010SubModuleHwVersion
OBJECT-TYPE
The major hardware version of the sub-module. Together with ciscoLS1010SubModuleHwVersionMinor, this completely specifies the hardware version of the sub-module.
1.3.6.1.4.1.9.5.11.1.3.1.1.4Integer32read-onlycurrent
ciscoLS1010SubModuleSwVersion
OBJECT-TYPE
The software version number.
1.3.6.1.4.1.9.5.11.1.3.1.1.5Integer32read-onlycurrent
ciscoLS1010SubModuleDescr
OBJECT-TYPE
A descriptive string used by the agent to describe the module.
1.3.6.1.4.1.9.5.11.1.3.1.1.6DisplayStringread-onlycurrent
ciscoLS1010SubModuleNumPorts
OBJECT-TYPE
The maximum number of ports supported by this sub-module.
1.3.6.1.4.1.9.5.11.1.3.1.1.7INTEGER (0..255)read-onlycurrent
ciscoLS1010SubModuleAdminStatus
OBJECT-TYPE
This object can be read/written as reset or ok.
1.3.6.1.4.1.9.5.11.1.3.1.1.8INTEGER {reset(1), ok(2)}read-writecurrent
ciscoLS1010SubModuleHwVersionMinor
OBJECT-TYPE
The minor hardware version of the sub-module. Together with ciscoLS1010SubModuleHwVersion, this completely specifies the hardware version of the sub-module.
1.3.6.1.4.1.9.5.11.1.3.1.1.9Integer32read-onlycurrent
ciscoLS1010SubModuleOperStatus
OBJECT-TYPE
Operational status of the submodule.
1.3.6.1.4.1.9.5.11.1.3.1.1.10OperStatusread-onlycurrent
ciscoLS1010SubModuleSerialNumberString
OBJECT-TYPE
The serial number of the sub-module.
1.3.6.1.4.1.9.5.11.1.3.1.1.11DisplayStringread-onlycurrent
ciscoLS1010PortGroup
OBJECT-IDENTITY
1.3.6.1.4.1.9.5.11.1.4
ciscoLS1010PortTable
OBJECT-TYPE
A list of port entries. The number of entries is determined by the number of modules in the chassis, the number of sub-module in the module and the number of ports on each sub-module.
1.3.6.1.4.1.9.5.11.1.4.1not-accessiblecurrent
ciscoLS1010PortEntry
OBJECT-TYPE
Entry containing information for a particular port on a sub-module.
1.3.6.1.4.1.9.5.11.1.4.1.1not-accessiblecurrent
ciscoLS1010PortIndex
OBJECT-TYPE
An index value that uniquely identifies this port within a sub-module. The value is determined by the location of the port on the sub-module. Valid entries are 1 to the value of subModuleNumPorts for this sub-module.
1.3.6.1.4.1.9.5.11.1.4.1.1.1INTEGER (0..255)not-accessiblecurrent
ciscoLS1010PortIfIndex
OBJECT-TYPE
The ifIndex value assigned to this port.
1.3.6.1.4.1.9.5.11.1.4.1.1.2InterfaceIndexread-onlycurrent
ciscoLS1010CpuSwitchGroup
OBJECT-IDENTITY
1.3.6.1.4.1.9.5.11.1.5
ciscoAtmCpuAdminStatus
OBJECT-TYPE
Reset will reload the CPU board.
1.3.6.1.4.1.9.5.11.1.5.1INTEGER {reset(1), ok(2)}read-writecurrent
ciscoAtmSwitchTotalBuffer
OBJECT-TYPE
The total cell buffer count in switch's shared memory.
1.3.6.1.4.1.9.5.11.1.5.2Integer32read-onlycurrent
ciscoAtmSwitchFreeBuffer
OBJECT-TYPE
The free cell buffer count in switch's shared memory.
1.3.6.1.4.1.9.5.11.1.5.3Gauge32read-onlycurrent
ciscoAtmSwitchDiscardCells
OBJECT-TYPE
The total discarded cells of the switch.
1.3.6.1.4.1.9.5.11.1.5.4Counter32read-onlycurrent
ciscoAtmSwitchInvalidCells
OBJECT-TYPE
The total invalid cells of the switch.
1.3.6.1.4.1.9.5.11.1.5.5Counter32read-onlycurrent
ciscoAtmSwitchInvalidCellHeaderTable
OBJECT-TYPE
A list of invalid cell header entries.
1.3.6.1.4.1.9.5.11.1.5.6not-accessiblecurrent
ciscoAtmSwitchInvalidCellHeaderEntry
OBJECT-TYPE
a entry of invalid cell header.
1.3.6.1.4.1.9.5.11.1.5.6.1not-accessiblecurrent
ciscoAtmSwitchInvalidCellHeaderIndex
OBJECT-TYPE
A sequence number that identifies a invalid cell header entry in the table.
1.3.6.1.4.1.9.5.11.1.5.6.1.1INTEGER (1..64)not-accessiblecurrent
ciscoAtmSwitchInvalidCellHeader
OBJECT-TYPE
The most recently received invalid cells header. octet 0 is port number (0-32), octet 1 bit 7-5 is PTI, octet 1 bit 4 is CLP, octet 1 bit 3-0 is GFC, octet 2 is VPI, octet 3 is high byte of VCI octet 4 is low byte of VCI.
1.3.6.1.4.1.9.5.11.1.5.6.1.2OCTET STRING (SIZE(5))read-onlycurrent
ciscoAtmCpuTerminateOamFlow
OBJECT-TYPE
Terminate all the incoming OAM cells to the CPU port.
1.3.6.1.4.1.9.5.11.1.5.7TruthValueread-writeobsolete
ciscoAtmInterceptEndToEndOamFlow
OBJECT-TYPE
Indicates whether incoming end-to-end OAM flow cells are sent to the switch CPU. If the value is 'true', all incoming end-to-end OAM flow cells, including those on transit connections, are sent to the switch CPU. This value may be modified at any time. The modified value will apply to all existing connections. Note that if the value is 'false', the switch can not use the ATM PING application for end-to-end loopback on transit connections, since the end-to-end OAM cells on such connections will not be seen by the switch CPU.
1.3.6.1.4.1.9.5.11.1.5.8TruthValueread-writecurrent
clsEnetPortGroup
OBJECT-IDENTITY
1.3.6.1.4.1.9.5.11.1.6
clsEnetPortTable
OBJECT-TYPE
A list of ethernet port entries. This table is mainly to support ethernet port only.
1.3.6.1.4.1.9.5.11.1.6.1not-accessiblecurrent
clsEnetPortEntry
OBJECT-TYPE
Entry contains information of a particular ethernet port.
1.3.6.1.4.1.9.5.11.1.6.1.1not-accessiblecurrent
clsEnetPortDuplex
OBJECT-TYPE
Indicates whether the port is operating in half-duplex, full-duplex, or auto mode. If the port could not agree with the far end on port duplex, the port will be in auto(2) mode. Unknown(1) indicates either the port does not support duplex mode, or the duplex mode is none of the defined.
1.3.6.1.4.1.9.5.11.1.6.1.1.1INTEGER {unknown(1), auto(2), half(3), full(4)}read-writecurrent
clsEnetPortAdminSpeed
OBJECT-TYPE
Indicates the desired speed of the port in bits per second. The current operational speed of the port is determined by ifSpeed. If the port could not agree with the far end on port speed, the port will be in auto(2) mode, which will force the port to transmit in speed whichever is lower. Unknown(1) indicates either the port does not support admin speed, or the admin speed is none of the defined.
1.3.6.1.4.1.9.5.11.1.6.1.1.2INTEGER {unknown(1), auto(2), e10Mbps(3), e100Mbps(4), e1000Mbps(5)}read-writecurrent
clsEnetPortType
OBJECT-TYPE
The type of physical layer medium-dependent interface on the port. unknown(1) indicates that the port type is none of those defined. empty(6) indicates that the port is not present.
1.3.6.1.4.1.9.5.11.1.6.1.1.3INTEGER {unknown(1), e100BaseTX(2), e100BaseFX(3), e1000BaseLX(4), e1000BaseSX(5), empty(6)}read-onlycurrent
clsEnetPortLinkStatus
OBJECT-TYPE
This object indicates how the link status of the port came up. autoNegotiate(2) -- the port will try to negotiate the link with the partner port. If successful, the link will come up, otherwise the link will remain down. forceUp(3) -- the port will force the link up irrespective of its partner port. This will bring up the link in full duplex only. Default is autoNegotiate(2).
1.3.6.1.4.1.9.5.11.1.6.1.1.4INTEGER {unknown(1), autoNegotiate(2), forceUp(3)}read-writecurrent
clsPortLedGroup
OBJECT-IDENTITY
1.3.6.1.4.1.9.5.11.1.7
clsPortLedTable
OBJECT-TYPE
A list of LED entries associated with a port.
1.3.6.1.4.1.9.5.11.1.7.1not-accessiblecurrent
clsPortLedEntry
OBJECT-TYPE
Entry contains information of a particular LED associated with a particular port which is identified by ifIndex.
1.3.6.1.4.1.9.5.11.1.7.1.1not-accessiblecurrent
clsPortLedIndex
OBJECT-TYPE
An index that uniquely identifies this LED among all the LEDs associated with the port identified by ifIndex. This value is related to the physical location of the LED, and is in ascending order from top to bottom, left to right.
1.3.6.1.4.1.9.5.11.1.7.1.1.1INTEGER (1..255)not-accessiblecurrent
clsPortLedType
OBJECT-TYPE
Indicates the type or label of the LED.
1.3.6.1.4.1.9.5.11.1.7.1.1.2INTEGER {ledTx(1), ledRx(2), ledLink(3), led100Mbps(4), ledRxLoss(5), ledRxFullOut(6), ledRxSync(7), ledFullDuplex(8), ledOptDetect(9)}read-onlycurrent
clsPortLedStatus
OBJECT-TYPE
Indicates the status of the LED. Unknown(1) indicates either the LED status is not supported or the status is none of the defined.
1.3.6.1.4.1.9.5.11.1.7.1.1.3INTEGER {unknown(1), on(2), off(3)}read-onlycurrent
ciscoLS1010ChassisMIBNotificationPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.9.5.11.2
ciscoLS1010ChassisMIBNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.9.5.11.2.0
ciscoLS1010ChassisMIBConformance
OBJECT-IDENTITY
1.3.6.1.4.1.9.5.11.3
ciscoLS1010ChassisMIBCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.9.5.11.3.1
ciscoLS1010ChassisMIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.9.5.11.3.2

Notifications

NameOIDStatus
ciscoLS1010ChassisFailureNotification
NOTIFICATION-TYPE
Agent detects a change in the status of ps0, ps1, fan, 12V line, and/or chassis temperature. This notification will be generated when the status changes from no-fault to fault, and also when the status changes from fault to no-fault.
1.3.6.1.4.1.9.5.11.2.0.1current
ciscoLS1010ChassisChangeNotification
NOTIFICATION-TYPE
Agent detects any hot-swap component change or changes in the chassis.
1.3.6.1.4.1.9.5.11.2.0.2current

Conformance

NameOIDStatus
ciscoLS1010ChassisMIBCompliance
MODULE-COMPLIANCE
The compliance statement for entities which implement the Cisco LS1010 Chassis MIB. This statement was obsoleted by ciscoLS1010ChassisMIBComplianceRev1.
1.3.6.1.4.1.9.5.11.3.1.1obsolete
ciscoLS1010ChassisMIBComplianceRev1
MODULE-COMPLIANCE
The compliance statement for entities which implement the Cisco LS1010 Chassis MIB. This statement was obsoleted by ciscoLS1010ChassisMIBComplianceRev2.
1.3.6.1.4.1.9.5.11.3.1.2obsolete
ciscoLS1010ChassisMIBComplianceRev2
MODULE-COMPLIANCE
The compliance statement for entities which implement the Cisco LS1010 Chassis MIB
1.3.6.1.4.1.9.5.11.3.1.3obsolete
ciscoLS1010ChassisMIBComplianceRev3
MODULE-COMPLIANCE
The compliance statement for entities which implement the Cisco LS1010 Chassis MIB.
1.3.6.1.4.1.9.5.11.3.1.4obsolete
ciscoLS1010ChassisMIBComplianceRev4
MODULE-COMPLIANCE
The compliance statement for entities which implement the Cisco LS1010 Chassis MIB.
1.3.6.1.4.1.9.5.11.3.1.5obsolete
ciscoLS1010ChassisMIBComplianceRev5
MODULE-COMPLIANCE
The compliance statement for the Cisco 6400 product.
1.3.6.1.4.1.9.5.11.3.1.6obsolete
ciscoLS1010ChassisMIBComplianceRev6
MODULE-COMPLIANCE
The compliance statement for this MIB.
1.3.6.1.4.1.9.5.11.3.1.7current
ciscoLS1010ChassisMIBGroup
OBJECT-GROUP
A collection of objects providing rhino chassis information
1.3.6.1.4.1.9.5.11.3.2.1obsolete
ciscoLS1010ChassisMIBObsoleteGroup
OBJECT-GROUP
A collection of objects providing rhino chassis information which are obsolete.
1.3.6.1.4.1.9.5.11.3.2.2obsolete
ciscoLS1010ChassisMIBRev1Group
OBJECT-GROUP
A collection of objects useful for reporting the hardware version of sub-modules in the chassis.
1.3.6.1.4.1.9.5.11.3.2.3current
ciscoLS1010ChassisMIBClockingGroup
OBJECT-GROUP
A collection of objects useful for managing clocking.
1.3.6.1.4.1.9.5.11.3.2.4current
ciscoLS1010ChassisMIBGroup1
OBJECT-GROUP
A collection of objects for managing the LS1010 chassis.
1.3.6.1.4.1.9.5.11.3.2.5obsolete
clsEnetPortGroup1
OBJECT-GROUP
A collection of objects for managing ethernet ports.
1.3.6.1.4.1.9.5.11.3.2.6current
clsPortLedGroup1
OBJECT-GROUP
A collection of objects for showing port LEDs.
1.3.6.1.4.1.9.5.11.3.2.7current
clsOperStatusGroup
OBJECT-GROUP
A collection of objects for displaying operational status of modules and sub-modules in the chassis.
1.3.6.1.4.1.9.5.11.3.2.8current
clsInletTempGroup
OBJECT-GROUP
A collection of objects for reporting inlet temperature.
1.3.6.1.4.1.9.5.11.3.2.9current
ciscoLS1010ChassisMIBGroup2
OBJECT-GROUP
A collection of objects for managing the LS1010 chassis.
1.3.6.1.4.1.9.5.11.3.2.10current
ciscoLS1010ChassisMIBDeprecatedGroup
OBJECT-GROUP
A collection of objects providing rhino chassis information which are obsolete.
1.3.6.1.4.1.9.5.11.3.2.11deprecated
ciscoLS1010ChassisMIBNotificationGroup
NOTIFICATION-GROUP
A collection of notifications supported by LS1010 chassis.
1.3.6.1.4.1.9.5.11.3.2.12current