MIBs Depot

CISCO-PRP-MIB

Registered at
1.3.6.1.4.1.9.9.866
Last updated
2019-09-11 00:00
Organization
Cisco Systems, Inc.
Revisions
2019-09-11 00:00
Namespace
cisco
Source file
CISCO-PRP-MIB
Digest
sha256:b907178174e9d974929aac96dbb46173a69799b83b8de66433da36e3cae95a68

Description

Parallel Redundancy Protocol (PRP) is defined in the International Standard IEC 62439-3. PRP is designed to provide hitless redundancy (zero recovery time after failures) in Ethernet networks. PRP uses a scheme, where the end nodes implement redundancy (instead of network elements) by connecting two network interfaces to two independent, disjointed, parallel networks (LAN-A and LAN-B). Each of these Dually Attached Nodes (DANs) then have redundant paths to all other DANs in the network.

Contact

Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-<list>@cisco.com

Imports

FromSymbols
CISCO-SMIciscoMgmt
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIMODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

CISCO-PRP-MIB
CISCO-SMI
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
PrpStatus
TEXTUAL-CONVENTION
Operational status of the DLR Device. undefined(0) Value is not valid. stateUp(1) PRP channel or LAN state UP. stateDown(2) PRP channel or LAN state DOWN. state
current

Objects

NameOIDSyntaxAccessStatus
ciscoPrpMIBNotifs
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.866.0
ciscoPrpMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.866.1
ciscoPrpChannelTable
OBJECT-TYPE
Every entry in the table specifies information about the PRP channel.
1.3.6.1.4.1.9.9.866.1.1not-accessiblecurrent
ciscoPrpChannelEntry
OBJECT-TYPE
An entry in the prpChannelTable.
1.3.6.1.4.1.9.9.866.1.1.1not-accessiblecurrent
ciscoPrpChannelIndex
OBJECT-TYPE
Prp table entry index value.
1.3.6.1.4.1.9.9.866.1.1.1.1Unsigned32not-accessiblecurrent
ciscoPrpChannelId
OBJECT-TYPE
Specifies the PRP channel id.
1.3.6.1.4.1.9.9.866.1.1.1.2Unsigned32read-onlycurrent
ciscoPrpChannelName
OBJECT-TYPE
PRP channel name.
1.3.6.1.4.1.9.9.866.1.1.1.3DisplayStringread-onlycurrent
ciscoPrpChannelStatus
OBJECT-TYPE
Operational status of the PRP channel.
1.3.6.1.4.1.9.9.866.1.1.1.4PrpStatusread-onlycurrent
ciscoPrpChannelLanAStatus
OBJECT-TYPE
Operational status of the PRP Lan A connection status.
1.3.6.1.4.1.9.9.866.1.1.1.5PrpStatusread-onlycurrent
ciscoPrpChannelLanBStatus
OBJECT-TYPE
A ciscoPrpLanBStateChange notification is generated when the value of ciscoPrpChannelLanBStatus is changed to Up or Down. The notification contains information of ciscoPrpChannelId, ciscoPrpChannelName, ciscoPrpChannelLanBStatus.
1.3.6.1.4.1.9.9.866.1.1.1.6PrpStatusread-onlycurrent
ciscoPrpMIBConform
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.866.2
ciscoPrpMIBCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.866.2.1
ciscoPrpMIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.866.2.2

Notifications

NameOIDStatus
ciscoPrpChannelStateChange
NOTIFICATION-TYPE
A ciscoPrpChannelStateChange notification is generated when the value of ciscoPrpChannelStatus is changed to Up or Down. The notification contains information of ciscoPrpChannelId, ciscoPrpChannelName, ciscoPrpChannelStatus.
1.3.6.1.4.1.9.9.866.0.1current
ciscoPrpLanAStateChange
NOTIFICATION-TYPE
A ciscoPrpLanAStateChange notification is generated when the value of ciscoPrpChannelLanAStatus is changed to Up or Down. The notification contains information of ciscoPrpChannelId, ciscoPrpChannelName, ciscoPrpChannelLanAStatus.
1.3.6.1.4.1.9.9.866.0.2current
ciscoPrpLanBStateChange
NOTIFICATION-TYPE
Object to notify change in Lan B status of a PRP channel.
1.3.6.1.4.1.9.9.866.0.3current

Conformance

NameOIDStatus
ciscoPrpMIBCompliance
MODULE-COMPLIANCE
This is a default module-compliance containing default object groups.
1.3.6.1.4.1.9.9.866.2.1.1current
ciscoPrpMIBMainObjectGroup
OBJECT-GROUP
Object group for PRP channel table entries.
1.3.6.1.4.1.9.9.866.2.2.1current
ciscoPrpMIBNotificationGroup
NOTIFICATION-GROUP
Notification group which indicates state changes of a PRP channel.
1.3.6.1.4.1.9.9.866.2.2.2current