MIBs Depot

CISCO-P2P-IF-MIB

Registered at
1.3.6.1.4.1.9.9.668
Last updated
2008-08-12 00:00
Organization
Cisco Systems, Inc.
Revisions
2008-08-12 00:00
Namespace
cisco
Source file
CISCO-P2P-IF-MIB
Digest
sha256:8eb0c2f4f8b32c8fd6d098b10b2ac059e8304c361b54c31aab2a4a83eef4f99c

Description

The Point to Point Interface MIB module. This MIB manages the generic objects for Serial link or SONET/SDH like point to point network interfaces with the encapsulations of PPP (Point to Point Protocol), HDLC (High Level Data Link Control) or cHDLC (CIsco extension to High Level Data Link Control) framing. Acronyms and terms: FCS - Frame Check Sequence. The frame check sequence is used to ensure that the data received is actually the data sent. CRC - Cyclic Redundancy Check. The transmitting system processes the frame check sequence portion of the frame through an algorithm called a CRC (Cyclic Redundancy Check). One of the usages of CRC is in the following PPP/HLDC over SONET/SDH example. +----+ | PPP| FCS Bit SONET/SDH |HDLC|=> Generation => Stuffing => Scrambling => Framing +----+ CRC 16,32

Contact

Cisco Systems Customer Service Postal: 170 W. Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: q-snmp@cisco.com

Imports

FromSymbols
CISCO-SMIciscoMgmt
IF-MIBifIndex
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

CISCO-P2P-IF-MIB
CISCO-SMI
IANAifType-MIB
IF-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
Cp2pIfCrcMode
TEXTUAL-CONVENTION
Specifies the CRC mode of Cyclic Redundancy Check. crc16 - 16-bit CRC. crc32 - 32-bit CRC.
current
Cp2pIfScramblingMode
TEXTUAL-CONVENTION
An enumerated value of the Scrambling encryption mode of an interface. on - scrambling encryption enabled. off - scrambling encryption disabled.
current

Objects

NameOIDSyntaxAccessStatus
ciscoP2PIfMIBNotifs
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.668.0
ciscoP2PIfMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.668.1
cp2pIfGeneralObjects
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.668.1.1
cp2pIfCfgTable
OBJECT-TYPE
The Point to Point generic Configuration Table. It contains the standard configuration information of the Point to Point interface.
1.3.6.1.4.1.9.9.668.1.1.1not-accessiblecurrent
cp2pIfCfgEntry
OBJECT-TYPE
An entry in the configuration table for each Point to Point interface. The entry is created when the Point to Point related interface is created in ifTable. The possible ifType of point to point interface are listed as follows: [1] ppp(23) [2] hdlc(118) [3] propPointToPointSerial(22)
1.3.6.1.4.1.9.9.668.1.1.1.1not-accessiblecurrent
cp2pIfCfgCrcMode
OBJECT-TYPE
Specifies the CRC mode for the FCS generation of a packet sending via the Point to point interface.
1.3.6.1.4.1.9.9.668.1.1.1.1.1Cp2pIfCrcModeread-writecurrent
cp2pIfCfgScramblingMode
OBJECT-TYPE
Specifies the scrambling encryption mode of the point to point interface.
1.3.6.1.4.1.9.9.668.1.1.1.1.2Cp2pIfScramblingModeread-writecurrent
cp2pIfCfgTransmitDelay
OBJECT-TYPE
Specified the minimum delay after sending a packet via the point to point interface. The value of '0' indicates the transmit delay of packet is disabled.
1.3.6.1.4.1.9.9.668.1.1.1.1.3Unsigned32 (0..18000)read-writecurrent
cp2pIfStatsTable
OBJECT-TYPE
The Point to Point Interface Statistics Table. It contains statistics information of a Point to Point interface including the error statistics.
1.3.6.1.4.1.9.9.668.1.1.2not-accessiblecurrent
cp2pIfStatsEntry
OBJECT-TYPE
An entry in the statistics table for each Point to Point interface.
1.3.6.1.4.1.9.9.668.1.1.2.1not-accessiblecurrent
cp2pIfStatsInCrcErrors
OBJECT-TYPE
Accumulated number of CRC errors that are detected on the received packets via the Point to Point interface since system startup.
1.3.6.1.4.1.9.9.668.1.1.2.1.1Counter32read-onlycurrent
ciscoP2PIfMIBConformance
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.668.3
ciscoP2PIfMIBCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.668.3.1
ciscoP2PIfMIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.668.3.2

Conformance

NameOIDStatus
ciscoP2PIfMIBCompliance
MODULE-COMPLIANCE
The compliance statement for entities which implement the Cisco Point to Point interface MIB
1.3.6.1.4.1.9.9.668.3.1.1current
ciscoP2PIfMIBGeneralGroup
OBJECT-GROUP
The collection of objects providing general information about the Cisco Point to Point interfaces.
1.3.6.1.4.1.9.9.668.3.2.1current