CISCO-OPTICAL-MONITORING-MIB
- Registered at
- 1.3.6.1.4.1.9.10.83
- Last updated
- 2001-12-04 11:30
- Organization
- Cisco Systems, Inc.
- Revisions
- 2001-12-04 11:30
- Namespace
- cisco
- Source file
CISCO-OPTICAL-MONITORING-MIB- Digest
sha256:4a8bc6f2d988b9240f09e175e5cb8e8ceb78e521bab8ff52963f96838c342361
Description
This MIB module is used to monitor optical parameters of a network element.This MIB deals with the operating parameters of the optical layer. The optical layer is a term that defines all the devices/systems that deal with the conversion of data in it's electrical form to optical form, transmission of the optical data, reception, and finally re-conversion to electrical signals.
Contact
Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 Tel: +1 800 553-NETS E-mail: gsr-netman@cisco.com
Imports
| From | Symbols |
|---|---|
| CISCO-SMI | ciscoExperiment |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCO-OPTICAL-MONITORING-MIB CISCO-SMI IANAifType-MIB IF-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ciscoOpticalMonMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.83.1 | |||
| comParameters OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.83.1.1 | |||
| comParametersTable OBJECT-TYPE This table lists the instrumented parameters of all interfaces on the network element whose optical parameters are to be monitored. | 1.3.6.1.4.1.9.10.83.1.1.1 | not-accessible | current | |
| comParametersEntry OBJECT-TYPE Only the ifIndices of optical interfaces whose parameters need to be monitored will be used to index this table. | 1.3.6.1.4.1.9.10.83.1.1.1.1 | not-accessible | current | |
| comTxBiasCurrent OBJECT-TYPE This holds the value of the laser diode forward bias current for the interface being instrumented, and is an indication of the Tx optical power. | 1.3.6.1.4.1.9.10.83.1.1.1.1.1 | Integer32 (0..100000) | read-only | current |
| comTxPowerSupported OBJECT-TYPE Boolean to indicate if the interface being instrumented supports comTxPower. comTxPowerSupported is set to true if the interface supports the comTxPower object, and set to false otherwise. | 1.3.6.1.4.1.9.10.83.1.1.1.1.2 | TruthValue | read-only | current |
| comTxPower OBJECT-TYPE This object holds the value of the transmitter optical power for the interface being instrumented. The optical is proportional to the laser diode current. This object makes sense only if comTxPowerSupported is true. All values must be converted to microWatts. | 1.3.6.1.4.1.9.10.83.1.1.1.1.3 | Integer32 (0..2147483647) | read-only | current |
| comTxLaserTempSupported OBJECT-TYPE Boolean to indicate if the interface being instrumented supports comTxLaserTemp. comTxLaserTempSupported is set to true if the interface supports the comTxLaserTemp object, and set to false otherwise. | 1.3.6.1.4.1.9.10.83.1.1.1.1.4 | TruthValue | read-only | current |
| comTxLaserTemp OBJECT-TYPE This object holds the value of the transmitter laser diode temperature for the interface being instrumented. This object indicates the health of the transmitter. | 1.3.6.1.4.1.9.10.83.1.1.1.1.5 | Integer32 (-253..200) | read-only | current |
| comRxPowerACDC OBJECT-TYPE This object holds the value of the total power (AC + DC) at the optical Rx of the interface. All values must be converted to microWatts. | 1.3.6.1.4.1.9.10.83.1.1.1.1.6 | Integer32 (0..2147483647) | read-only | current |
| comRxPowerACSupported OBJECT-TYPE Boolean to indicate if comRxPowerAC is supported by the interface being instrumented. comRxPowerACSupported is set to true if the interface supports the comRxPowerAC object,and set to false otherwise. | 1.3.6.1.4.1.9.10.83.1.1.1.1.7 | TruthValue | read-only | current |
| comRxPowerAC OBJECT-TYPE This object holds the value of the AC power at the optical Receiver of the interface. Not all interfaces support this object.This object makes sense only if comRxPowerACSupported is true. All values must be converted to microWatts. | 1.3.6.1.4.1.9.10.83.1.1.1.1.8 | Integer32 (0..2147483647) | read-only | current |
| ciscoOpticalMonMIBNotifPrefix OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.83.2 | |||
| ciscoOpticalMonMIBNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.83.2.0 | |||
| ciscoOpticalMonMIBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.83.3 | |||
| ciscoOpticalMonMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.83.3.1 | |||
| ciscoOpticalMonMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.83.3.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| ciscoOpticalMonMIBCompliance MODULE-COMPLIANCE The compliance statement for entities which implement the Cisco Optical Monitoring MIB. | 1.3.6.1.4.1.9.10.83.3.1.1 | current |
| ciscoOpticalMonMIBParamGroup OBJECT-GROUP Parameters of the optical interfaces. | 1.3.6.1.4.1.9.10.83.3.2.1 | current |