CISCO-MPLS-LSR-EXT-STD-MIB
- Registered at
- 1.3.6.1.4.1.9.10.145
- Last updated
- 2012-04-30 00:00
- Organization
- Multiprotocol Label Switching (MPLS) Working Group
- Revisions
- 2012-02-22 00:00
- Namespace
- cisco
- Source file
CISCO-MPLS-LSR-EXT-STD-MIB- Digest
sha256:8ae8b44970ddf27f3fff271220e4c0ca9e470fa1c65c0fc6e2e0448bbafd4eb4
Description
Copyright (c) 2012 IETF Trust and the persons identified as the document authors. All rights reserved. This MIB module contains generic object definitions for MPLS LSR in transport networks.
Contact
Venkatesan Mahalingam Dell Inc, 350 Holger way, San Jose, CA, USA Email: venkat.mahalingams@gmail.com Kannan KV Sampath Aricent, India Email: Kannan.Sampath@aricent.com Sam Aldrin Huawei Technologies 2330 Central Express Way, Santa Clara, CA 95051, USA Email: aldrin.ietf@gmail.com Thomas D. Nadeau CA Technologies 273 Corporate Drive, Portsmouth, NH, USA Email: thomas.nadeau@ca.com
Imports
| From | Symbols |
|---|---|
| CISCO-SMI | ciscoExperiment |
| MPLS-LSR-STD-MIB | mplsInSegmentGroup, mplsLsrNotificationGroup, mplsOutSegmentGroup, mplsPerfGroup, mplsXCGroup, mplsXCInSegmentIndex, mplsXCIndex, mplsXCOutSegmentIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, RowPointer, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCO-MPLS-LSR-EXT-STD-MIB CISCO-SMI IANA-ADDRESS-FAMILY-NUMBERS-MIB IANAifType-MIB IF-MIB INET-ADDRESS-MIB MPLS-LSR-STD-MIB MPLS-TC-STD-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| cmplsLsrExtNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.145.0 | |||
| cmplsLsrExtObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.145.1 | |||
| cmplsXCExtTable OBJECT-TYPE This table sparse augments the mplsXCTable of MPLS-LSR-STD-MIB [RFC3813] to provide MPLS-TP specific information about associated tunnel information | 1.3.6.1.4.1.9.10.145.1.1 | not-accessible | current | |
| cmplsXCExtEntry OBJECT-TYPE An entry in this table extends the cross connect information represented by an entry in the mplsXCTable in MPLS-LSR-STD-MIB [RFC3813] through a sparse augmentation. An entry can be created by a network administrator via SNMP SET commands, or in response to signaling protocol events. | 1.3.6.1.4.1.9.10.145.1.1.1 | not-accessible | current | |
| cmplsXCExtTunnelPointer OBJECT-TYPE This object indicates the back pointer to the tunnel entry segment. This object cannot be modified if mplsXCRowStatus for the corresponding entry in the mplsXCTable is active(1). | 1.3.6.1.4.1.9.10.145.1.1.1.1 | RowPointer | read-create | current |
| cmplsXCOppositeDirXCPtr OBJECT-TYPE This object indicates the pointer to the opposite direction XC entry. This object cannot be modified if mplsXCRowStatus for the corresponding entry in the mplsXCTable is active(1). | 1.3.6.1.4.1.9.10.145.1.1.1.2 | RowPointer | read-create | current |
| cmplsLsrExtConformance OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.145.2 | |||
| cmplsLsrExtGroups OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.145.2.1 | |||
| cmplsLsrExtCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.145.2.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| cmplsXCExtGroup OBJECT-GROUP This object should be supported in order to access the tunnel entry from XC entry. | 1.3.6.1.4.1.9.10.145.2.1.1 | current |
| cmplsLsrExtModuleFullCompliance MODULE-COMPLIANCE Compliance statement for agents that provide full support for MPLS-LSR-EXT-STD-MIB. The mandatory group has to be implemented by all LSRs that originate, terminate, or act as transit for TE-LSPs/tunnels. In addition, depending on the type of tunnels supported, other groups become mandatory as explained below. | 1.3.6.1.4.1.9.10.145.2.2.1 | current |
| cmplsLsrExtModuleReadOnlyCompliance MODULE-COMPLIANCE Compliance requirement for implementations that only provide read-only support for MPLS-LSR-EXT-STD-MIB. Such devices can then be monitored but cannot be configured using this MIB module. | 1.3.6.1.4.1.9.10.145.2.2.2 | current |