CISCO-MLD-SNOOPING-MIB
- Registered at
- 1.3.6.1.4.1.9.9.721
- Last updated
- 2010-07-02 00:00
- Organization
- Cisco Systems, Inc.
- Revisions
- 2010-07-02 00:00
- Namespace
- cisco
- Source file
CISCO-MLD-SNOOPING-MIB- Digest
sha256:349d38fa4b702e97cba7f2b0aa54da75c2182fc0ab06d240b162c914769b82c7
Description
This MIB module defines objects that describe IGMP/MLD snooping. It provides remote network management system the ability to manage the IGMP/MLD Snooping feature when snooping is operating at the system and port level. Virtual systems and related ports data can be accessed by NMS using appropriate SNMP context. E.g. in order to access data related to a particular L2VPN bridge domain system, the user shall specify on the SNMP request the SNMP context related to that particular bridge domain. Glossary of terms: GMI - Group Management Interval; it controls when the IGMP/MLD snooping expires stale group membership states. L2VPN - Layer 2 Virtual Private Network. IGMP - Internet Group Management Protocol. MLD - Multicast Listener Discovery. MRT - Max Response Time. TTL - Time To Live. PIM - Protocol Independent Multicast. TCN - Topology Change Notification. Querier - External IGMP/MLD router sending out queries which are flooded in the system (e.g a bridge domain). Internal Querier - Virtual Querier that solicits periodic membership reports by sending IGMP/MLD general queries out of all system ports. Winner/Looser Querier - A system can only have one active querier at a time, if the internal querier receives queries from another querier it performs querier election, the lowest IP address wins. G-Query - General IGMP/MLD Query. Solicitation - a global leave message with a NULL group multicast address, when the upstream router receives this solicitation, it immediately issues an general query.
Contact
Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-snmp@cisco.com
Imports
| From | Symbols |
|---|---|
| CISCO-SMI | ciscoMgmt |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, RowStatus, StorageType, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCO-MLD-SNOOPING-MIB CISCO-SMI INET-ADDRESS-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| CiscoMldPortIdentifier TEXTUAL-CONVENTION This textual convention denotes an octet string-value that indicates a bridge domain member. An implementation MUST ALWAYS interpret a CiscoMldPortIdentifier value within the context of a CiscoMldPortType value. Every use of the CiscoMldPortIdentifier textual convention requires the specification of a CiscoMldPortType object to provide the context. A MIB module SHOULD logically register the CiscoMldPortType object before the CiscoMldPortIdentifier object(s). The value of a CiscoMldPortIdentifier object MUST BE the null string if the value of the CiscoMldPortType object providing the context is 'unknown'. Implementations must ensure that a CiscoMldPortIdentifier object remains consistent with the CiscoMldPortType object providing the context. For example, an implementation must respond with an 'inconsistentValue' error if an attempt is made to modify a CiscoMldPortIdentifier object without changing the corresponding CiscoMldPortType object. | current | |||
| CiscoMldPortInterface TEXTUAL-CONVENTION This textual convention denotes an octet string-value identifying a row in ifTable (defined by the IF-MIB [RFC2863]). Octets Contents Encoding ========================================= 4 ifIndex-value network-byte order The corresponding CiscoMldPortType value is 'interface'. A MIB module SHOULD NOT directly use this textual convention in defining object, as it restricts bridge domain members to specific type. However, if a MIB module does chose to directly use the textual convention, it MAY chose to do so without a CiscoMldPortType object to define the context, since this textual convention implies the context. | current | |||
| CiscoMldPortPseudowire TEXTUAL-CONVENTION This textual convention denotes an octet string-value identifying a row in the cpwVcTable (defined by the CISCO-IETF-PW-MIB). Octets Contents Encoding ========================================= 4 cpwVcIndex-value network-byte order The corresponding CiscoMldPortType value is 'pw'. A MIB module SHOULD NOT directly use this textual convention in defining object, as it restricts bridge domain members to specific type. However, if a MIB module does chose to directly use the textual convention, it MAY chose to do so without a CiscoMldPortType object to define the context, since this textual convention implies the context. | current | |||
| CiscoMldPortType TEXTUAL-CONVENTION This textual convention denotes an enumerated integer-value that represents a bridge domain member type: 'unknown' The device is unable to ascertain the bridge domain member. 'interface' The bridge domain member is an interface represented by a row in the ifTable (defined by the IF-MIB [RFC2863]. 'pw' The bridge domain member is a L2VPN pseudowire represented by a row in the cpwVcTable (defined by the CISCO-IETF-PW-MIB). With the exception of the values 'unknown', each definition of a concrete CiscoMldPortType value MUST have a corresponding textual convention for use with the particular type of bridge domain member. To support future extensions, a MIB module SHOULD NOT sub-type the CiscoMldPortType textual convention in an object type definition. However, a compliance statement MAY sub-type it in order to require only a subset of the member types for a compliant implementation. Implementations must ensure that CiscoMldPortType objects and any dependent objects (e.g., CiscoMldPortIdentifier objects) are consistent. For example, an implementation must respond with an 'inconsistentValue' error if an attempt is made to modify a CiscoMldPortType object without changing the corresponding CiscoMldPortIdentifier object. | current | |||
| CiscoMldSnoopingVersion TEXTUAL-CONVENTION This textual convention denotes an enumerated integer-value that represents the IGMP/MLD snooping version: 'v1' - version 1 'v2' - version 2 'v3' - version 3 'unknown' - the system is not able to determine the version | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ciscoMldSnoopingMIBNotifs OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.721.0 | |||
| ciscoMldSnoopingMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.721.1 | |||
| cmsConfiguration OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.721.1.1 | |||
| cmsProfileTable OBJECT-TYPE This table lists IGMP/MLD configuration for each profile available on the system. | 1.3.6.1.4.1.9.9.721.1.1.1 | not-accessible | current | |
| cmsProfileEntry OBJECT-TYPE An entry describes a IGMP/MLD snooping profile; that is a set of configuration parameters that can be applied to either systems or ports. A peer SNMP entity may create a profile by setting an instance of cmsProfileStatus to 'createAndWait' or 'createAndGo'. Observe that an implementation that does not support these options must specify these limitations in an agent capabilities statement. Other management entities (e.g., the local console) may perform actions resulting in the creation of a member link. In these cases, the system must automatically create a row in the cmsProfileTable. A peer SNMP entity may destroy a profile by setting the corresponding instance of cmsProfileStatus to 'destroy'. Observe that an implementation that does not support this option must specify this limitation in an agent capabilities statement. Other management entities may perform actions resulting in the destruction of a profile. In these cases, the system must automatically destroy the corresponding row in the cmsProfileTable. | 1.3.6.1.4.1.9.9.721.1.1.1.1 | not-accessible | current | |
| cmsProfileName OBJECT-TYPE This object indicates a text string defining the name of the profile identified by cmsProfileIndex. | 1.3.6.1.4.1.9.9.721.1.1.1.1.1 | SnmpAdminString | not-accessible | current |
| cmsProfileStatus OBJECT-TYPE This object specifies the status of the row. The following columns must be valid before activating a row: - cmsProfileStorageType - cmsProfileSnoopMinVersion - cmsProfileIPAddrType - cmsProfileIPAddress - cmsProfileRobustnessVariable - cmsProfileInternalQuerier - cmsProfileLastMemberQueryCount - cmsProfileLastMemberQueryInterval - cmsProfileProxyReporting - cmsProfileReportSuppression - cmsProfileUnsolicitedReportTimer - cmsProfileFloodQueryCount - cmsProfileQuerySolicit - cmsProfileTTLCheck - cmsProfileRouterAlertCheck - cmsProfileIntQuerierMaxRespTime - cmsProfileIntQuerierQueryInterval - cmsProfileIntQuerierRobustnessVar - cmsProfileIntQuerierTCNQueryCount - cmsProfileIntQuerierTCNQueryIntrvl - cmsProfileIntQuerierExpiry - cmsProfileIntQuerierVersion - cmsProfileRouterGuard - cmsProfileStaticMRouter - cmsProfileImmediateLeave However, these objects specify valid default values. Thus, it is possible to use create-and-go row creation semantics without setting additional columns. An implementation must allow an EMS/NMS to modify any column when this column is 'active' | 1.3.6.1.4.1.9.9.721.1.1.1.1.2 | RowStatus | read-create | current |
| cmsProfileStorageType OBJECT-TYPE This object specifies the storage type of this conceptual row. | 1.3.6.1.4.1.9.9.721.1.1.1.1.3 | StorageType | read-create | current |
| cmsProfileSnoopMinVersion OBJECT-TYPE This object specifies the minimum IGMP or MLD version supported by snooping in the system where the profile is applied. | 1.3.6.1.4.1.9.9.721.1.1.1.1.4 | CiscoMldSnoopingVersion | read-create | current |
| cmsProfileIPAddrType OBJECT-TYPE This object specifies the IP address type (IPv4 or IPv6) for the objects cmsProfileIPAddress | 1.3.6.1.4.1.9.9.721.1.1.1.1.5 | InetAddressType | read-create | current |
| cmsProfileIPAddress OBJECT-TYPE This object specifies the system IP address used by IGMP/MLD snooping. | 1.3.6.1.4.1.9.9.721.1.1.1.1.6 | InetAddress | read-create | current |
| cmsProfileRobustnessVariable OBJECT-TYPE This object specifies the robustness-variable value used to calculate the group management interval (GMI): GMI = (robustness-variable * query-interval) + MRT | 1.3.6.1.4.1.9.9.721.1.1.1.1.7 | Unsigned32 (1..7) | read-create | current |
| cmsProfileInternalQuerier OBJECT-TYPE This object specifies the administrative status of the internal querier. A value of 'true' means that the internal querier feature is enabled. | 1.3.6.1.4.1.9.9.721.1.1.1.1.8 | TruthValue | read-only | current |
| cmsProfileLastMemberQueryCount OBJECT-TYPE This object specifies the profile member query count. This value is the number of group-specific queries IGMP/MLD snooping sends, in response to a leave message. | 1.3.6.1.4.1.9.9.721.1.1.1.1.9 | Unsigned32 | read-only | current |
| cmsProfileLastMemberQueryInterval OBJECT-TYPE This object specifies the query interval, which should be the time gap between two consecutive group-specific queries. | 1.3.6.1.4.1.9.9.721.1.1.1.1.10 | Unsigned32 (100..5000) | read-only | current |
| cmsProfileSuppressReport OBJECT-TYPE This object specifies the configuration status of the report suppression feature. A value of 'true' means that the reports are suppressed. | 1.3.6.1.4.1.9.9.721.1.1.1.1.11 | TruthValue | read-only | current |
| cmsProfileUnsolicitedReportTimer OBJECT-TYPE This object specifies the unsolicited report timer interval in minutes. The reports are forwarded at random intervals within the timeframe configured. | 1.3.6.1.4.1.9.9.721.1.1.1.1.12 | Unsigned32 | read-only | current |
| cmsProfileFloodQueryCount OBJECT-TYPE This object specifies the number of general queries for which the multicast traffic is flooded following a topology change notification, thus influencing the refresh period. | 1.3.6.1.4.1.9.9.721.1.1.1.1.13 | Unsigned32 | read-only | current |
| cmsProfileQuerySolicit OBJECT-TYPE This object specifies the query solicit administrative status. A value of 'true' means that the feature is enabled. | 1.3.6.1.4.1.9.9.721.1.1.1.1.14 | TruthValue | read-only | current |
| cmsProfileTTLCheck OBJECT-TYPE This object specifies administrative status of the time-to-live (TTL) check feature. A value of 'true', means IGMP/MLD snooping processes all packets by examining the TTL field in the header. | 1.3.6.1.4.1.9.9.721.1.1.1.1.15 | TruthValue | read-only | current |
| cmsProfileRouterAlertCheck OBJECT-TYPE This object specifies the administrative status of the alert check feature. A value of 'true', means IGMP/MLD snooping performs the validation before processing the message. | 1.3.6.1.4.1.9.9.721.1.1.1.1.16 | TruthValue | read-only | current |
| cmsProfileIntQuerierMaxRespTime OBJECT-TYPE This object indicates the maximum time the querier can take to reply to a query. It is used in order to calculate the Group Management Interval (GMI): GMI = (robustness-variable * query-interval) + MRT | 1.3.6.1.4.1.9.9.721.1.1.1.1.17 | Unsigned32 | read-only | current |
| cmsProfileIntQuerierQueryInterval OBJECT-TYPE This object specifies the internal querier query interval, which should be the time gap between two consecutive queries. It is used in order to calculate the Group Management Interval (GMI): GMI = (robustness-variable * query-interval) + MRT | 1.3.6.1.4.1.9.9.721.1.1.1.1.18 | Unsigned32 | read-only | current |
| cmsProfileIntQuerierTCNQueryCount OBJECT-TYPE This object specifies the Topopogy Change Notification query count for the internal querier. | 1.3.6.1.4.1.9.9.721.1.1.1.1.19 | Unsigned32 | read-only | current |
| cmsProfileIntQuerierTCNQueryInterval OBJECT-TYPE This object specifies the internal querier TCN query interval, which should be the time gap between two consecutive TCN queries | 1.3.6.1.4.1.9.9.721.1.1.1.1.20 | Unsigned32 | read-only | current |
| cmsProfileIntQuerierExpiry OBJECT-TYPE This object specifies the internal querier time out; that is the timer set by the internal querier after an election procedure where the internal query results as loser. If this timer expires before another query is received from the election winner, the internal querier becomes the active querier. | 1.3.6.1.4.1.9.9.721.1.1.1.1.21 | Unsigned32 | read-only | current |
| cmsProfileIntQuerierVersion OBJECT-TYPE This object specifies the internal querier version | 1.3.6.1.4.1.9.9.721.1.1.1.1.22 | CiscoMldSnoopingVersion | read-create | current |
| cmsProfileRouterGuard OBJECT-TYPE This object specifies the IGMP/MLD snooping router guard configuration status. A value of 'true' means that a port cannot be dynamically discovered as an mrouter | 1.3.6.1.4.1.9.9.721.1.1.1.1.23 | TruthValue | read-only | current |
| cmsProfileStaticMRouter OBJECT-TYPE This object specifies the static multicast router administrative status. A value of 'true' means that the feature is enabled. | 1.3.6.1.4.1.9.9.721.1.1.1.1.24 | TruthValue | read-only | current |
| cmsProfileImmediateLeave OBJECT-TYPE This object specifies the immediate leave administrative status. A value of 'true' means that IGMP/MLD snooping will remove a Layer 2 interface from the forwarding table entry immediately, without first sending group-specific queries to the port. | 1.3.6.1.4.1.9.9.721.1.1.1.1.25 | TruthValue | read-only | current |
| cmsConfigPortTable OBJECT-TYPE This table lists snooping configuration for each port. | 1.3.6.1.4.1.9.9.721.1.1.2 | not-accessible | current | |
| cmsConfigPortEntry OBJECT-TYPE An entry describes the configuration associated with a port. A peer SNMP entity may create a port config by setting an instance of cmsConfigPortStatus to 'createAndWait' or 'createAndGo'. Observe that an implementation that does not support these options must specify these limitations in an agent capabilities statement. Other management entities (e.g., the local console) may perform actions resulting in the creation of a member link. In these cases, the system must automatically create a row in the cmsConfigPortTable. A peer SNMP entity may destroy a port config by setting the corresponding instance of cmsConfigPortStatus to 'destroy'. Observe that an implementation that does not support this option must specify this limitation in an agent capabilities statement. Other management entities may perform actions resulting in the destruction of a profile. In these cases, the system must automatically destroy the corresponding row in the cmsConfigPortTable. | 1.3.6.1.4.1.9.9.721.1.1.2.1 | not-accessible | current | |
| cmsPortType OBJECT-TYPE This object indicates the port type. | 1.3.6.1.4.1.9.9.721.1.1.2.1.1 | CiscoMldPortType | not-accessible | current |
| cmsPortId OBJECT-TYPE This object indentifies the port. Depending on the cmsPortType this object will uniquely identify the port accordingly with the definition of the TC CiscoMldPortIdentifier. | 1.3.6.1.4.1.9.9.721.1.1.2.1.2 | CiscoMldPortIdentifier | not-accessible | current |
| cmsConfigPortStatus OBJECT-TYPE This object specifies the status of the row. The following columns must be valid before activating a row: - cmsConfigPortProfileName However, this objects specify a valid default value. Thus, it is possible to use create-and-go row creation semantics without setting additional columns. An implementation must allow an EMS/NMS to modify any column when this column is 'active' | 1.3.6.1.4.1.9.9.721.1.1.2.1.3 | RowStatus | read-create | current |
| cmsConfigPortStorageType OBJECT-TYPE This object specifies the storage type of this conceptual row. | 1.3.6.1.4.1.9.9.721.1.1.2.1.4 | StorageType | read-create | current |
| cmsConfigPortProfileName OBJECT-TYPE This object specifies the name of the profile contained by the cmsProfileTable associated with the system port identified by the table entry indices. | 1.3.6.1.4.1.9.9.721.1.1.2.1.5 | SnmpAdminString | read-create | current |
| cmsConfigSystemProfileName OBJECT-TYPE This object indicates the IGMP/MLD profile name associated to the system. It corresponds to an entry on cmsProfileTable where the complete set of configuration parameters are stored. | 1.3.6.1.4.1.9.9.721.1.1.3 | SnmpAdminString | read-only | current |
| cmsSystemInfo OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.721.1.2 | |||
| cmsOperInfo OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.721.1.3 | |||
| cmsQuerierIPAddrType OBJECT-TYPE This object indicates the IP address type (IPv4 or IPv6) of cmsQuerierIPAddr. | 1.3.6.1.4.1.9.9.721.1.3.1 | InetAddressType | read-only | current |
| cmsQuerierIPAddr OBJECT-TYPE This object indicates the IP address of the querier. | 1.3.6.1.4.1.9.9.721.1.3.2 | InetAddress | read-only | current |
| cmsQuerierPortType OBJECT-TYPE This object indicates the port type of the querier. | 1.3.6.1.4.1.9.9.721.1.3.3 | CiscoMldPortType | read-only | current |
| cmsQuerierPortId OBJECT-TYPE This object indicates the port identifier of the querier; that is the port through which the querier's queries are received on the system. | 1.3.6.1.4.1.9.9.721.1.3.4 | CiscoMldPortIdentifier | read-only | current |
| cmsQuerierVersion OBJECT-TYPE This object indicates the querier IGMP/MLD snooping version. | 1.3.6.1.4.1.9.9.721.1.3.5 | CiscoMldSnoopingVersion | read-only | current |
| cmsQuerierQueryInterval OBJECT-TYPE This object indicates the querier interval, which is the time gap between two consecutive queries. | 1.3.6.1.4.1.9.9.721.1.3.6 | Unsigned32 | read-only | current |
| cmsQuerierRobustness OBJECT-TYPE This object indicates the querier robustness variable. | 1.3.6.1.4.1.9.9.721.1.3.7 | Unsigned32 | read-only | current |
| cmsQuerierMaxRespTime OBJECT-TYPE This object indicates the maximum time the querier can take to reply to a query. | 1.3.6.1.4.1.9.9.721.1.3.8 | Unsigned32 | read-only | current |
| cmsQuerierTimeSinceLastGQuery OBJECT-TYPE This object indicates for the querier the time interval since the last general query. | 1.3.6.1.4.1.9.9.721.1.3.9 | Unsigned32 | read-only | current |
| cmsMcastInfoTable OBJECT-TYPE This table lists the snooping multicast operational data for group/source addresses associated to a port. | 1.3.6.1.4.1.9.9.721.1.3.10 | not-accessible | current | |
| cmsMcastInfoEntry OBJECT-TYPE An entry describes the multicast operational data for the group/source addresses associated to a port. The system creates a row in this table for each port and group/source address configured on the snooping profile associated to that port. The system destroy a row on this table when the related group/source configuration is removed form the profile associated to that port. If a port is associated with a profile not defining any static group/source there will not be any entry for that port on this table. | 1.3.6.1.4.1.9.9.721.1.3.10.1 | not-accessible | current | |
| cmsMcastInfoGroupAddrType OBJECT-TYPE This object indicates the IP version of cmsMcastGroupAddr and cmsMcastSourceAddr | 1.3.6.1.4.1.9.9.721.1.3.10.1.1 | InetAddressType | not-accessible | current |
| cmsMcastInfoGroupAddr OBJECT-TYPE This object uniquely identifies the IP address of the multicast group observed through IGMP/MLD snooping. | 1.3.6.1.4.1.9.9.721.1.3.10.1.2 | InetAddress | not-accessible | current |
| cmsMcastInfoSourceAddr OBJECT-TYPE This object indicates the IP address of a IGMP/MLD snooping source | 1.3.6.1.4.1.9.9.721.1.3.10.1.3 | InetAddress | not-accessible | current |
| cmsMcastInfoGroupFilter OBJECT-TYPE This object indicates the multicast group filter associated with the group/source related to the indices. - 'exclude': The group filter mode is set to exclude. - 'include': The group filter mode is set to include. | 1.3.6.1.4.1.9.9.721.1.3.10.1.4 | INTEGER {exclude(1), include(2)} | read-only | current |
| cmsMcastInfoExpiry OBJECT-TYPE This object indicates the multicast group expiry time. When this timer expires the group membership is removed from the port. | 1.3.6.1.4.1.9.9.721.1.3.10.1.5 | Unsigned32 | read-only | current |
| cmsMcastInfoFlag OBJECT-TYPE This object indicates the multicast flag associated with the group/source related to the indices: 'static' - The group state is configured via snooping profile 'dynamic' - The group state is learnt as a result of receiving IGMP/MLD reports. 'staticAndDynamic' - The group state is both statically configured via snooping profile and learnt as a result of receiving IGMP/MLD reports. 'unknown' - The group state is not known. | 1.3.6.1.4.1.9.9.721.1.3.10.1.6 | INTEGER {static(1), dynamic(2), staticAndDynamic(3), unknown(4)} | read-only | current |
| cmsMRouterPortInfoTable OBJECT-TYPE This table provides IGMP/MLD snooping operational data for the multicast router ports available on the system. | 1.3.6.1.4.1.9.9.721.1.3.11 | not-accessible | current | |
| cmsMRouterPortInfoEntry OBJECT-TYPE A conceptual row in the cmsMRouterPortInfoTable. There is an entry in this table for each port where IGMP/MLD snooping is configured on the system. | 1.3.6.1.4.1.9.9.721.1.3.11.1 | not-accessible | current | |
| cmsMRouterType OBJECT-TYPE This object indicates the multicast router type for the port identified by the indices. 'dynamic' - indicates that the mrouter port is dynamically discovered by the system. 'static' - indicates that the mrouter ports is statically configured. 'staticAndDynamic' - indicates that the mrouter port is both static and dynamic at the same time. 'unknown' - indicates that the mrouter type is not known | 1.3.6.1.4.1.9.9.721.1.3.11.1.1 | INTEGER {static(1), dynamic(2), staticAndDynamic(3), unknown(4)} | read-only | current |
| cmsSystemStats OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.721.1.4 | |||
| cmsSysIntQuerierRxGeneralQueries OBJECT-TYPE This object indicates the number of general queries received by the internal querier. | 1.3.6.1.4.1.9.9.721.1.4.1 | Counter32 | read-only | current |
| cmsSysIntQuerierRxGeneralQueriesWhenDisabled OBJECT-TYPE This object indicates the number of general queries received when internal querier is disabled. | 1.3.6.1.4.1.9.9.721.1.4.2 | Counter32 | read-only | current |
| cmsSysIntQuerierRxGeneralQueriesAsQuerier OBJECT-TYPE This object indicates the number of general queries received by the internal querier as querier. | 1.3.6.1.4.1.9.9.721.1.4.3 | Counter32 | read-only | current |
| cmsSysIntQuerierRxGeneralQueriesAsNonQuerier OBJECT-TYPE This object indicates the number of general queries received by the internal querier as non querier. | 1.3.6.1.4.1.9.9.721.1.4.4 | Counter32 | read-only | current |
| cmsSysIntQuerierRxGeneralQueriesAsWinner OBJECT-TYPE This object indicates the number of general queries received by the internal querier as winner. | 1.3.6.1.4.1.9.9.721.1.4.5 | Counter32 | read-only | current |
| cmsSysIntQuerierRxGeneralQueriesAsLoser OBJECT-TYPE This object indicates the number of general queries received by the internal querier as loser. | 1.3.6.1.4.1.9.9.721.1.4.6 | Counter32 | read-only | current |
| cmsSysIntQuerierRxGlobalLeaves OBJECT-TYPE This object indicates the number of global leaves received. | 1.3.6.1.4.1.9.9.721.1.4.7 | Counter32 | read-only | current |
| cmsSysIntQuerierRxGlobalLeavesWhenDisabled OBJECT-TYPE This object indicates the number of global leaves received when internal querier is disabled. | 1.3.6.1.4.1.9.9.721.1.4.8 | Counter32 | read-only | current |
| cmsSysIntQuerierRxGlobalLeavsAsNonQuerier OBJECT-TYPE This objects indicates the number of global leaves received as non querier. | 1.3.6.1.4.1.9.9.721.1.4.9 | Counter32 | read-only | current |
| cmsSysIntQuerierRxGlobalLeavesIgnored OBJECT-TYPE This objects indicates the number of global leaves received and ignored. | 1.3.6.1.4.1.9.9.721.1.4.10 | Counter32 | read-only | current |
| cmsSysIntQuerierRxPimEnabledNotifications OBJECT-TYPE This object indicates the number of PIM enabled notification received. | 1.3.6.1.4.1.9.9.721.1.4.11 | Counter32 | read-only | current |
| cmsSysIntQuerierRxPimDisabledNotifications OBJECT-TYPE This object indicates the number of PIM disabled notification received. | 1.3.6.1.4.1.9.9.721.1.4.12 | Counter32 | read-only | current |
| cmsSysIntQuerierRxLocalQuerySolicitations OBJECT-TYPE This object indicates the number of local query solicitations received. | 1.3.6.1.4.1.9.9.721.1.4.13 | Counter32 | read-only | current |
| cmsSysIntQuerierTxGeneralQueries OBJECT-TYPE This object indicates the number of general queries transmitted. | 1.3.6.1.4.1.9.9.721.1.4.14 | Counter32 | read-only | current |
| cmsSysTrfGeneralQueriesReceived OBJECT-TYPE This object indicates the number of general queries received. | 1.3.6.1.4.1.9.9.721.1.4.15 | Counter32 | read-only | current |
| cmsSysTrfGeneralQueriesReinjected OBJECT-TYPE This object indicates the number of general querier re-injected. | 1.3.6.1.4.1.9.9.721.1.4.16 | Counter32 | read-only | current |
| cmsSysTrfGeneralQueriesGenerated OBJECT-TYPE This object indicates the number of general queries generated. | 1.3.6.1.4.1.9.9.721.1.4.17 | Counter32 | read-only | current |
| cmsSysTrfGrpSpecificQueriesReceived OBJECT-TYPE This object indicates the number of group specific queries received. | 1.3.6.1.4.1.9.9.721.1.4.18 | Counter32 | read-only | current |
| cmsSysTrfGrpSpecificQueriesReinjected OBJECT-TYPE This object indicates the number of group specific queries re-injected. | 1.3.6.1.4.1.9.9.721.1.4.19 | Unsigned32 | read-only | current |
| cmsSysTrfGrpSpecificQueriesGenerated OBJECT-TYPE This object indicates the number of group specific queries generated. | 1.3.6.1.4.1.9.9.721.1.4.20 | Counter32 | read-only | current |
| cmsSysTrfGSSpecificQueriesReceived OBJECT-TYPE This object indicates the number of group source specific queries received. | 1.3.6.1.4.1.9.9.721.1.4.21 | Counter32 | read-only | current |
| cmsSysTrfGSSpecificQueriesReinjected OBJECT-TYPE This object indicates the number of group source specific queries re-injected. | 1.3.6.1.4.1.9.9.721.1.4.22 | Counter32 | read-only | current |
| cmsSysTrfGSSpecificQueriesGenerated OBJECT-TYPE This object indicates the number of group source specific queries generated. | 1.3.6.1.4.1.9.9.721.1.4.23 | Counter32 | read-only | current |
| cmsSysTrfV2ReportReceived OBJECT-TYPE This object indicates the number of V2 reports received. | 1.3.6.1.4.1.9.9.721.1.4.24 | Counter32 | read-only | current |
| cmsSysTrfV2ReportReinjected OBJECT-TYPE This object indicates the number of V2 reports re-injected. | 1.3.6.1.4.1.9.9.721.1.4.25 | Counter32 | read-only | current |
| cmsSysTrfV2ReportGenerated OBJECT-TYPE This object indicates the number of V2 reports generated. | 1.3.6.1.4.1.9.9.721.1.4.26 | Counter32 | read-only | current |
| cmsSysTrfV3ReportReceived OBJECT-TYPE This object indicates the number of V3 reports received. | 1.3.6.1.4.1.9.9.721.1.4.27 | Counter32 | read-only | current |
| cmsSysTrfV3ReportReinjected OBJECT-TYPE This object indicates the number of V3 reports re-injected. | 1.3.6.1.4.1.9.9.721.1.4.28 | Counter32 | read-only | current |
| cmsSysTrfV3ReportGenerated OBJECT-TYPE This object indicates the number of V3 reports generated. | 1.3.6.1.4.1.9.9.721.1.4.29 | Counter32 | read-only | current |
| cmsSysTrfGlobalLeavesReceived OBJECT-TYPE This object indicates the number of global leaves received. | 1.3.6.1.4.1.9.9.721.1.4.30 | Counter32 | read-only | current |
| cmsSysTrfGlobalLeavesReinjected OBJECT-TYPE This object indicates the number of global leaves re-injected. | 1.3.6.1.4.1.9.9.721.1.4.31 | Counter32 | read-only | current |
| cmsSysTrfGlobalLeavesGenerated OBJECT-TYPE This object indicates the number of global leaves generated. | 1.3.6.1.4.1.9.9.721.1.4.32 | Counter32 | read-only | current |
| cmsSysTrfPIMHellosReceived OBJECT-TYPE This object indicates the number of PIM hellos received. | 1.3.6.1.4.1.9.9.721.1.4.33 | Counter32 | read-only | current |
| cmsSysTrfPIMHellosReinjected OBJECT-TYPE This object indicates the number of PIM hellos re-injected. | 1.3.6.1.4.1.9.9.721.1.4.34 | Counter32 | read-only | current |
| cmsSysTrfPIMHellosGenerated OBJECT-TYPE This object indicates the number of PIM hellos generated. | 1.3.6.1.4.1.9.9.721.1.4.35 | Unsigned32 | read-only | current |
| cmsSysTrfRxPcktsFlooded OBJECT-TYPE This object indicates the number of received packets flooded on the system. | 1.3.6.1.4.1.9.9.721.1.4.36 | Counter32 | read-only | current |
| cmsSysTrfRxPcktsFwdToMembers OBJECT-TYPE This object indicates the number of received packets forwarded to the snooping members. | 1.3.6.1.4.1.9.9.721.1.4.37 | Counter32 | read-only | current |
| cmsSysTrfRxPcktsFwdToMrouters OBJECT-TYPE This object indicates the number of received packets forwarded to MRouters. | 1.3.6.1.4.1.9.9.721.1.4.38 | Counter32 | read-only | current |
| cmsSysTrfRxPcktsConsumed OBJECT-TYPE This object indicates the number of received packets consumed by the system. | 1.3.6.1.4.1.9.9.721.1.4.39 | Counter32 | read-only | current |
| cmsSysTrfRxErrors OBJECT-TYPE This object indicates the number of received packets with errors. | 1.3.6.1.4.1.9.9.721.1.4.40 | Counter32 | read-only | current |
| cmsSysTrfRxOther OBJECT-TYPE This object indicates the number of received packets not counted on the other rx counters on this table. | 1.3.6.1.4.1.9.9.721.1.4.41 | Counter32 | read-only | current |
| cmsSysTrfTxErrors OBJECT-TYPE This object indicates the number of transmitted packets with errors. | 1.3.6.1.4.1.9.9.721.1.4.42 | Counter32 | read-only | current |
| cmsSysRxV3RepIsInclude OBJECT-TYPE This object indicates the number of V3 reports of type 'include' received by the system. | 1.3.6.1.4.1.9.9.721.1.4.43 | Counter32 | read-only | current |
| cmsSysRxV3RepChangeToInclude OBJECT-TYPE This object indicates the number of V3 reports of type 'change to include' received by the system. | 1.3.6.1.4.1.9.9.721.1.4.44 | Counter32 | read-only | current |
| cmsSysRxV3RepIsExclude OBJECT-TYPE This object indicates the number of V3 reports of type 'exclude' received by the system. | 1.3.6.1.4.1.9.9.721.1.4.45 | Counter32 | read-only | current |
| cmsSysRxV3RepChangeToExclude OBJECT-TYPE This object indicates the number of V3 reports of type 'change to exclude' received by the system. | 1.3.6.1.4.1.9.9.721.1.4.46 | Counter32 | read-only | current |
| cmsSysRxV3RepAllowNewSrc OBJECT-TYPE This object indicates the number of V3 reports of type 'Allow New Source' received by the system. | 1.3.6.1.4.1.9.9.721.1.4.47 | Counter32 | read-only | current |
| cmsSysRxV3RepBlockOldSrc OBJECT-TYPE This object indicates the number of V3 reports of type 'block old source' received by the system. | 1.3.6.1.4.1.9.9.721.1.4.48 | Counter32 | read-only | current |
| cmsPortStats OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.721.1.5 | |||
| cmsStatsPortTrfTable OBJECT-TYPE This table provides the IGMP/MLD snooping port traffic statistics. Each row contains traffic statistical data associated with a unique bridge domain port identified by the indexes. Conceptual rows can be seen by SNMP agents or NMS as containing statistical informations related to the indexes discovered on cbdBridgeDomainTable and cbdPortTable | 1.3.6.1.4.1.9.9.721.1.5.1 | not-accessible | current | |
| cmsStatsPortTrfEntry OBJECT-TYPE A conceptual row in the cmsStatsPortTrfTable. There is an entry in this table for each port where IGMP/MLD snooping is configured on the system. | 1.3.6.1.4.1.9.9.721.1.5.1.1 | not-accessible | current | |
| cmsStsPortTrfGeneralQueriesReceived OBJECT-TYPE This object indicates the number of general queries received on the port identified by the indices | 1.3.6.1.4.1.9.9.721.1.5.1.1.1 | Counter32 | read-only | current |
| cmsStsPortTrfGeneralQueriesReinjected OBJECT-TYPE This object indicates the number of general queries re-injected on the port identified by the indices | 1.3.6.1.4.1.9.9.721.1.5.1.1.2 | Counter32 | read-only | current |
| cmsStsPortTrfGeneralQueriesGenerated OBJECT-TYPE This object indicates the number of general queries generated on the port identified by the indices | 1.3.6.1.4.1.9.9.721.1.5.1.1.3 | Counter32 | read-only | current |
| cmsStsPortTrfGrpSpecificQueriesReceived OBJECT-TYPE This object indicates the number of group specific queries received on the port identified by the indices | 1.3.6.1.4.1.9.9.721.1.5.1.1.4 | Counter32 | read-only | current |
| cmsStsPortTrfGrpSpecificQueriesReinjected OBJECT-TYPE This object indicates the number of group specific queries re-injected on the port identified by the indices | 1.3.6.1.4.1.9.9.721.1.5.1.1.5 | Counter32 | read-only | current |
| cmsStsPortTrfGrpSpecificQueriesGenerated OBJECT-TYPE This object indicates the number of group specific queries generated on the port identified by the indices | 1.3.6.1.4.1.9.9.721.1.5.1.1.6 | Counter32 | read-only | current |
| cmsStsPortTrfGSSpecificQueriesReceived OBJECT-TYPE This object indicates the number of group source specific queries received on the port identified by the indices | 1.3.6.1.4.1.9.9.721.1.5.1.1.7 | Counter32 | read-only | current |
| cmsStsPortTrfGSSpecificQueriesReinjected OBJECT-TYPE This object indicates the number of group source specific queries re-injected on the port identified by the indices | 1.3.6.1.4.1.9.9.721.1.5.1.1.8 | Counter32 | read-only | current |
| cmsStsPortTrfGSSpecificQueriesGenerated OBJECT-TYPE This object indicates the number of group source specific queries generated on the port identified by the indices | 1.3.6.1.4.1.9.9.721.1.5.1.1.9 | Counter32 | read-only | current |
| cmsStsPortTrfV2ReportReceived OBJECT-TYPE This object indicates the number of V2 reports received on the port identified by the indices | 1.3.6.1.4.1.9.9.721.1.5.1.1.10 | Counter32 | read-only | current |
| cmsStsPortTrfV2ReportReinjected OBJECT-TYPE This object indicates the number of V2 reports re-injected on the port identified by the indices | 1.3.6.1.4.1.9.9.721.1.5.1.1.11 | Counter32 | read-only | current |
| cmsStsPortTrfV2ReportGenerated OBJECT-TYPE This object indicates the number of V2 reports generated on the port identified by the indices | 1.3.6.1.4.1.9.9.721.1.5.1.1.12 | Counter32 | read-only | current |
| cmsStsPortTrfV3ReportReceived OBJECT-TYPE This object indicates the number of V3 reports received on the port identified by the indices | 1.3.6.1.4.1.9.9.721.1.5.1.1.13 | Counter32 | read-only | current |
| cmsStsPortTrfV3ReportReinjected OBJECT-TYPE This object indicates the number of V3 reports re-injected on the port identified by the indices | 1.3.6.1.4.1.9.9.721.1.5.1.1.14 | Counter32 | read-only | current |
| cmsStsPortTrfV3ReportGenerated OBJECT-TYPE This object indicates the number of V3 reports generated on the port identified by the indices | 1.3.6.1.4.1.9.9.721.1.5.1.1.15 | Counter32 | read-only | current |
| cmsStsPortTrfGlobalLeavesReceived OBJECT-TYPE This object indicates the number of global leaves received on the port identified by the indices | 1.3.6.1.4.1.9.9.721.1.5.1.1.16 | Counter32 | read-only | current |
| cmsStsPortTrfGlobalLeavesReinjected OBJECT-TYPE This object indicates the number of global leaves re-injected on the port identified by the indices | 1.3.6.1.4.1.9.9.721.1.5.1.1.17 | Counter32 | read-only | current |
| cmsStsPortTrfGlobalLeavesGenerated OBJECT-TYPE This object indicates the number of global leaves generated on the port identified by the indices | 1.3.6.1.4.1.9.9.721.1.5.1.1.18 | Counter32 | read-only | current |
| cmsStsPortTrfPIMHellosReceived OBJECT-TYPE This object indicates the number of PIM hellos received on the port identified by the indices | 1.3.6.1.4.1.9.9.721.1.5.1.1.19 | Counter32 | read-only | current |
| cmsStsPortTrfPIMHellosReinjected OBJECT-TYPE This object indicates the number of PIM hellos re-injected on the port identified by the indices | 1.3.6.1.4.1.9.9.721.1.5.1.1.20 | Counter32 | read-only | current |
| cmsStsPortTrfPIMHellosGenerated OBJECT-TYPE This object indicates the number of PIM hellos generated on the port identified by the indices | 1.3.6.1.4.1.9.9.721.1.5.1.1.21 | Counter32 | read-only | current |
| cmsStsPortTrfRxPcktsFlooded OBJECT-TYPE This object indicates the number of received packets flooded on the port identified by the indices | 1.3.6.1.4.1.9.9.721.1.5.1.1.22 | Counter32 | read-only | current |
| cmsStsPortTrfRxPcktsFwdToMembers OBJECT-TYPE This object indicates the number of received packets forwarded to members on the port identified by the indices | 1.3.6.1.4.1.9.9.721.1.5.1.1.23 | Counter32 | read-only | current |
| cmsStsPortTrfRxPcktsFwdToMrouters OBJECT-TYPE This object indicates the number of received packets forwarded to MRouters on the port identified by the indices | 1.3.6.1.4.1.9.9.721.1.5.1.1.24 | Counter32 | read-only | current |
| cmsStsPortTrfRxPcktsConsumed OBJECT-TYPE This object indicates the number of received packets consumed on the port identified by the indices | 1.3.6.1.4.1.9.9.721.1.5.1.1.25 | Counter32 | read-only | current |
| cmsStsPortTrfRxErrors OBJECT-TYPE This object indicates the number of received packets with errors on the port identified by the indices | 1.3.6.1.4.1.9.9.721.1.5.1.1.26 | Counter32 | read-only | current |
| cmsStsPortTrfRxOther OBJECT-TYPE This object indicates the number of received packets on the port identified by the indices and not counted on the others receive counters | 1.3.6.1.4.1.9.9.721.1.5.1.1.27 | Counter32 | read-only | current |
| cmsStsPortTrfTxErrors OBJECT-TYPE This object indicates the number of transmitted packets with errors on the port identified by the indices | 1.3.6.1.4.1.9.9.721.1.5.1.1.28 | Counter32 | read-only | current |
| cmsStsPortRxV3RepIsInclude OBJECT-TYPE This object indicates the number of V3 reports of type 'include' received on the port identified by the indices | 1.3.6.1.4.1.9.9.721.1.5.1.1.29 | Counter32 | read-only | current |
| cmsStsPortRxV3RepChangeToInclude OBJECT-TYPE This object indicates the number of V3 reports of type 'change to include' received on the port identified by the indices | 1.3.6.1.4.1.9.9.721.1.5.1.1.30 | Counter32 | read-only | current |
| cmsStsPortRxV3RepIsExclude OBJECT-TYPE This object indicates the number of V3 reports of type 'exclude' received on the port identified by the indices | 1.3.6.1.4.1.9.9.721.1.5.1.1.31 | Counter32 | read-only | current |
| cmsStsPortRxV3RepChangeToExclude OBJECT-TYPE This object indicates the number of V3 reports of type 'change to exclude' received on the port identified by the indices | 1.3.6.1.4.1.9.9.721.1.5.1.1.32 | Counter32 | read-only | current |
| cmsStsPortRxV3RepAllowNewSrc OBJECT-TYPE This object indicates the number of V3 reports of type 'allow new source' received on the port identified by the indices | 1.3.6.1.4.1.9.9.721.1.5.1.1.33 | Counter32 | read-only | current |
| cmsStsPortRxV3RepBlockOldSrc OBJECT-TYPE This object indicates the number of V3 reports of type 'block old source' received on the port identified by the indices | 1.3.6.1.4.1.9.9.721.1.5.1.1.34 | Counter32 | read-only | current |
| cmsStsPortGrps OBJECT-TYPE This object indicates the number of groups associated with the port identified by the indices | 1.3.6.1.4.1.9.9.721.1.5.1.1.35 | Counter32 | read-only | current |
| cmsStsPortSGs OBJECT-TYPE This object indicates the number of sources associated with the port identified by the indices | 1.3.6.1.4.1.9.9.721.1.5.1.1.36 | Counter32 | read-only | current |
| ciscoMldSnoopingMIBConform OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.721.2 | |||
| ciscoMldSnoopingMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.721.2.1 | |||
| ciscoMldSnoopingMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.721.2.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| ciscoMldSnoopingMIBCompliance MODULE-COMPLIANCE The basic implementation requirements for agents that support the CISCO-MLD-SNOOPING-MIB. | 1.3.6.1.4.1.9.9.721.2.1.1 | current |
| ciscoMldSnoopingMIBConfigMainObjectGroup OBJECT-GROUP A collections of objects representing the main configuration elements of CISCO-MLD-SNOOPING-MIB. | 1.3.6.1.4.1.9.9.721.2.2.1 | current |
| ciscoMldSnoopingMIBConfigDetailedObjectGroup OBJECT-GROUP A collections of objects representing the detailed configuration elements of CISCO-MLD-SNOOPING-MIB. | 1.3.6.1.4.1.9.9.721.2.2.2 | current |
| ciscoMldSnoopingMIBInfoMainObjectGroup OBJECT-GROUP A collections of objects representing the main operational elements of CISCO-MLD-SNOOPING-MIB. | 1.3.6.1.4.1.9.9.721.2.2.3 | current |
| ciscoMldSnoopingMIBStatsMainObjectGroup OBJECT-GROUP A collections of objects representing the main statistical elements of CISCO-MLD-SNOOPING-MIB. | 1.3.6.1.4.1.9.9.721.2.2.4 | current |
| ciscoMldSnoopingMIBStatsDetailedObjectGroup OBJECT-GROUP A collections of objects representing the detailed statistical elements of CISCO-MLD-SNOOPING-MIB. | 1.3.6.1.4.1.9.9.721.2.2.5 | current |