CISCO-MGX82XX-RPM-SUBIF-MIB
- Registered at
- 1.3.6.1.4.1.351.150.60
- Last updated
- 2002-09-08 00:00
- Organization
- Cisco Systems, Inc.
- Revisions
- 2002-09-08 00:00
- Namespace
- cisco
- Source file
CISCO-MGX82XX-RPM-SUBIF-MIB- Digest
sha256:4787b44c20dbf3935596ec27a43e428a62b7aaa42daa427cebef37bc786b5528
Description
This MIB is used to provision backplane sub-interfaces on the MGX's Route Processor Module (RPM). This MIB is implemented on the MGX controller to manage the RPM. The RPM family of Router Modules run the IOS Operating System
Contact
Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-wanatm@cisco.com
Imports
| From | Symbols |
|---|---|
| BASIS-MIB | rpmPort |
| CISCOWAN-SMI | ciscoWan |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
BASIS-MIB CISCO-MGX82XX-RPM-SUBIF-MIB CISCOWAN-SMI SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| rpmPortTable OBJECT-TYPE This table contains information on subinterfaces configured on RPM back plane interface. | 1.3.6.1.4.1.351.110.5.2.9.1.1 | not-accessible | current | |
| rpmPortEntry OBJECT-TYPE An entry for the RPM backplane sub interface. Each entry contains RPM's backplane sub interface number, its IP address and ATM address. | 1.3.6.1.4.1.351.110.5.2.9.1.1.1 | not-accessible | current | |
| rpmPortSlotNum OBJECT-TYPE This object specifies the the slot number of the RPM card in MGX shelf. | 1.3.6.1.4.1.351.110.5.2.9.1.1.1.1 | Integer32 (1..30) | read-only | current |
| rpmPortInterface OBJECT-TYPE This is the RPM's backplane interface. Currently there is only one interface and hence only supported value is 1. | 1.3.6.1.4.1.351.110.5.2.9.1.1.1.2 | Integer32 (1..2147483647) | read-only | current |
| rpmPortSubInterface OBJECT-TYPE This object identifies the sub-interface number. The value 0 is for the sub-interface on the main interface(rpmPortInterface). | 1.3.6.1.4.1.351.110.5.2.9.1.1.1.3 | Integer32 (0..2147483647) | read-only | current |
| rpmPortRowStatus OBJECT-TYPE This indicates the status of this subinterface. add(1) : sub-interface is added. del(2) : sub-interface is deleted. mod(3) : Set to this value before modifying objects related to Subinterfaces. | 1.3.6.1.4.1.351.110.5.2.9.1.1.1.4 | INTEGER {add(1), del(2), mod(3)} | read-only | current |
| rpmPortIpAddress OBJECT-TYPE IP address configured on the sub-interface. | 1.3.6.1.4.1.351.110.5.2.9.1.1.1.5 | IpAddress | read-only | current |
| rpmPortSubNetMask OBJECT-TYPE The subnet mask configured on the sub-interface. | 1.3.6.1.4.1.351.110.5.2.9.1.1.1.6 | IpAddress | read-only | current |
| rpmPortState OBJECT-TYPE This indicates the state of this sub-interface. notConfigured(1) : Sub-interface is not configured. active(2) : Sub-interface is in active state. failed(3) : Sub-interface is in failed state. | 1.3.6.1.4.1.351.110.5.2.9.1.1.1.7 | INTEGER {notConfigured(1), active(2), failed(3)} | read-only | current |
| cmrSubIfMIBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.351.150.60.2 | |||
| cmrSubIfMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.351.150.60.2.1 | |||
| cmrSubIfMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.351.150.60.2.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| cmrSubIfMIBCompliance MODULE-COMPLIANCE The compliance statement for the Cisco MGX RPM sub-interface MIB. | 1.3.6.1.4.1.351.150.60.2.1.1 | current |
| cmrSubIfMIBGroup OBJECT-GROUP Objects related to ATM Subinterface in RPM module. | 1.3.6.1.4.1.351.150.60.2.2.1 | current |