MIBs Depot

CISCO-MGX82XX-PXM-CLOCK-MIB

Registered at
1.3.6.1.4.1.351.110.3.16
1.3.6.1.4.1.351.150.72
Last updated
2003-05-27 00:00
Organization
Cisco Systems, Inc.
Revisions
2003-05-27 00:00
Namespace
cisco
Source file
CISCO-MGX82XX-PXM-CLOCK-MIB
Digest
sha256:c0b7af08fcc68b017f8976a0be1125d11ae662280354fd86baa1831cb0c81bed

Description

The MIB module to describe the clock configuration in Processor Switch Module(PXM) in MGX82xx product. Back cards supported for PXM1: PXM-UI : T1 Clock port, E1 Clock Port PXM-UI-S3 : External Clock1 for T1/E1 Clock input.

Contact

Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-wanatm@cisco.com

Imports

FromSymbols
BASIS-MIBcardSpecific
CISCOWAN-SMIciscoWan
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIInteger32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BASIS-MIB
CISCO-MGX82XX-PXM-CLOCK-MIB
CISCOWAN-SMI
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
CmpClockConnectorType
TEXTUAL-CONVENTION
Represents the connector type for the clock device. rj45Type(1): RJ-45 Connector. This is for T1/E1 clock input. smbType (2): SMB Connector. This is for E1 clock input.
current
CmpClockExistence
TEXTUAL-CONVENTION
This TEXTUAL Convention represents the existence of the clock source. clkNotPresent (1): The T1/E1 external clock not present. clkPresent (2): The T1/E1 external clock present.
current
CmpClockImpedance
TEXTUAL-CONVENTION
This Textual Convention provides the impedance on external clock input on PXM-UI-S3 back card.
current
CmpClockSourceType
TEXTUAL-CONVENTION
This object identifies the source of the Mux Clock on PXM card. pxmInbandClock1 (1), pxmInbandClock2 (5): clock is derived from physical line pxmServiceModuleClock1(2), pxmServiceModuleClock2(6): clock is derived from service module. pxmTopSRMClock (3), pxmBottomSRMClock (7): clock is derived from SRM module. pxmExternalClock(4), pxmExternalClock2(9) :clock is derived from the port. pxmInternalOscillator (8): clock is derived from internal oscillator.
current
CmpCurrentClock
TEXTUAL-CONVENTION
This TEXTUAL Convention represents the clock source currently selected for PXM card. primary(1): The primary clock source is described by pxmPrimaryMuxClockSource secondary(2): The secondary clock source is described by pxmSecondaryMuxClockSource. intOscillator(3): Current clock is internal oscillator.
current

Objects

NameOIDSyntaxAccessStatus
pxmClockConfig
OBJECT-IDENTITY
1.3.6.1.4.1.351.110.3.16
pxmPrimaryMuxClockSource
OBJECT-TYPE
This object identifies the source of the Primary Mux Clock for PXM card.
1.3.6.1.4.1.351.110.3.16.1CmpClockSourceTyperead-onlycurrent
pxmPrimaryInbandClockSourceLineNumber
OBJECT-TYPE
This object indicates the inband line number. This is applicable when pxmPrimaryMuxClockSource is pxmInbandClock1(1) or pxmServiceModuleClock2 (5).
1.3.6.1.4.1.351.110.3.16.2Integer32 (0..4)read-onlycurrent
pxmPrimarySMClockSourceSlotNumber
OBJECT-TYPE
This object indicates the service module slot number. This is applicable when pxmPrimaryMuxClockSource is pxmServiceModuleClock1(2) or pxmServiceModuleClock2(6).
1.3.6.1.4.1.351.110.3.16.3Integer32 (0..32)read-onlycurrent
pxmSecondaryMuxClockSource
OBJECT-TYPE
This object identifies the source of the Secondary Mux Clock for PXM card.
1.3.6.1.4.1.351.110.3.16.4CmpClockSourceTyperead-onlycurrent
pxmSecondaryInbandClockSourceLineNumber
OBJECT-TYPE
This object indicates the inband line number. This is applicable when pxmSecondaryMuxClockSource is pxmInbandClock1(1) or pxmServiceModuleClock2 (5).
1.3.6.1.4.1.351.110.3.16.5Integer32 (0..4)read-onlycurrent
pxmSecondarySMClockSourceSlotNumber
OBJECT-TYPE
This object indicates the service module slot number. This is applicable when pxmSecondaryMuxClockSource is pxmServiceModuleClock1(2) or pxmServiceModuleClock2(6).
1.3.6.1.4.1.351.110.3.16.6Integer32 (0..32)read-onlycurrent
pxmCurrentClock
OBJECT-TYPE
This object represents the clock source currently selected for PXM card. primary(1): The primary clock source is described by pxmPrimaryMuxClockSource secondary(2): The secondary clock source is described by pxmSecondaryMuxClockSource. intOscillator(3): Current clock is internal oscillator.
1.3.6.1.4.1.351.110.3.16.7CmpCurrentClockread-onlycurrent
pxmPreviousClock
OBJECT-TYPE
This object represents the clock source previously selected for PXM card.
1.3.6.1.4.1.351.110.3.16.8CmpCurrentClockread-onlycurrent
pxmExtClockPresent
OBJECT-TYPE
Status of External T1/E1 Clock on PXM card.
1.3.6.1.4.1.351.110.3.16.9CmpClockExistenceread-onlycurrent
pxmExtClkSrcImpedance
OBJECT-TYPE
Impedance on external clock input for PXM card.
1.3.6.1.4.1.351.110.3.16.10CmpClockImpedanceread-onlycurrent
pxmExtClkConnectorType
OBJECT-TYPE
This object describes the type of connector available for connecting the external clock source to the PXM.
1.3.6.1.4.1.351.110.3.16.11CmpClockConnectorTyperead-onlycurrent
pxmClkStratumLevel
OBJECT-TYPE
This object describes the lowest stratum level provided by the interface the external clock source to the PXM back card.
1.3.6.1.4.1.351.110.3.16.12INTEGER {stratumUnknown(1), stratumLevel1(2), stratumLevel2(3), stratumLevel3E(4), stratumLevel3(5), stratumLevel4(6), stratumLevel4E(7)}read-onlycurrent
pxmClkErrReason
OBJECT-TYPE
This object gives more information about clock status. The possible values are : goodClk(1) : Clock is good unkownReason(2) : reason not known noClkSignal(3) : Loss of signal(LOS) on clock source freqTooHigh(4) : frequency drifted too high freqTooLow(5) : frequency drifted too low excessiveJitter(6) : jitter has exceeded the tolerance missingCard (7) : no clock hardware found missingLogicalIf(8): Logical Interface missing or not operational noClock (9): No clock.
1.3.6.1.4.1.351.110.3.16.13INTEGER {goodClk(1), unknownReason(2), noClkSignal(3), freqTooHigh(4), freqTooLow(5), excessiveJitter(6), missingCard(7), missingLogicalIf(8), noClock(9)}read-onlycurrent
pxmExtClock2Present
OBJECT-TYPE
This object indicates the status of external T1/E1 Clock on port 2 of PXMUI-S3 back card.
1.3.6.1.4.1.351.110.3.16.14CmpClockExistenceread-onlycurrent
pxmExtClk2SrcImpedance
OBJECT-TYPE
This object provides the impedance on external clock input on port 2 of PXMUI-S3 back card.
1.3.6.1.4.1.351.110.3.16.15CmpClockImpedanceread-onlycurrent
pxmExtClk2ConnectorType
OBJECT-TYPE
This object describes the type of connector available for connecting the external clock source to the port 2 of PXM-UI-S3 back card of PXM.
1.3.6.1.4.1.351.110.3.16.16CmpClockConnectorTyperead-onlycurrent
cmpClockMIBConformance
OBJECT-IDENTITY
1.3.6.1.4.1.351.150.72.2
cmpClockMIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.351.150.72.2.1
cmpClockMIBCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.351.150.72.2.2

Conformance

NameOIDStatus
cmpClockInfoGroup
OBJECT-GROUP
The collection of objects which are used for providing information on PXM Clock configuration.
1.3.6.1.4.1.351.150.72.2.1.1current
cmpPrimaryClockInfoGroup
OBJECT-GROUP
The collection of objects which are used for providing information on Primary Clock configuration.
1.3.6.1.4.1.351.150.72.2.1.2current
cmpSecondaryClockInfoGroup
OBJECT-GROUP
The collection of objects which are used for providing information on Secondary Clock configuration.
1.3.6.1.4.1.351.150.72.2.1.3current
cmpExtClockInfoGroup
OBJECT-GROUP
The collection of objects which are used for providing general information on PXM Clock configuration.
1.3.6.1.4.1.351.150.72.2.1.4current
cmpClockCompliance
MODULE-COMPLIANCE
The compliance statement for objects related to PXM Clock mib.
1.3.6.1.4.1.351.150.72.2.2.1current