CISCO-MGX82XX-ENVMON-MIB
- Registered at
- 1.3.6.1.4.1.351.150.70
- Last updated
- 2003-04-17 00:00
- Organization
- Cisco Systems, Inc.
- Revisions
- 2003-04-17 00:00
- Namespace
- cisco
- Source file
CISCO-MGX82XX-ENVMON-MIB- Digest
sha256:8b54e0f50ff4e647c42caadcffb73c66e0b3c667034441ab38352ee208bae47a
Description
The MIB module to describe the status of the Environmental Monitoring devices in MGX82xx products.
Contact
Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-wanatm@cisco.com
Imports
| From | Symbols |
|---|---|
| BASIS-MIB | basisAsm |
| CISCOWAN-SMI | ciscoWan |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
BASIS-MIB CISCO-MGX82XX-ENVMON-MIB CISCOWAN-SMI SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| asmAlarmTable OBJECT-TYPE The ASM Alarm table. The table size is given by the value of ASMNumOfValidEntries. | 1.3.6.1.4.1.351.110.1.2.1 | not-accessible | current | |
| asmAlarmEntry OBJECT-TYPE An entry in the Basis ASM Alarm Table. | 1.3.6.1.4.1.351.110.1.2.1.1 | not-accessible | current | |
| asmAlarmNum OBJECT-TYPE This object is the identifier of a ASM alarm entry. The Alarm is further identified by the objects ASMAlarmType & ASMAlarmUnitNum. | 1.3.6.1.4.1.351.110.1.2.1.1.1 | Integer32 (1..100) | read-only | current |
| asmAlarmType OBJECT-TYPE The value for this object indicates the type of device for which alarm is applicable. The possible values are : alarmOther (1) : Other than specified below alarmTemperature(2) : Temperature sensor alarmPSU (3) : Power Supply Unit alarmDCLevel (4) : DC Level Sensor alarmFanUnit (5) : FAN speed sensor. | 1.3.6.1.4.1.351.110.1.2.1.1.2 | INTEGER {alarmOther(1), alarmTemperature(2), alarmPSU(3), alarmDCLevel(4), alarmFanUnit(5)} | read-only | current |
| asmAlarmUnitNum OBJECT-TYPE This object identifies one unit among a number of identical units represented in this table having the same asmAlarmType. | 1.3.6.1.4.1.351.110.1.2.1.1.3 | Integer32 (1..16) | read-only | current |
| asmAlarmThreshold OBJECT-TYPE This object specifies the threshold beyond which the alarmable unit is said to be in an abnormal state. | 1.3.6.1.4.1.351.110.1.2.1.1.4 | Integer32 (1..2147483647) | read-only | current |
| asmAlarmSeverity OBJECT-TYPE This variable specifies the severity of the alarm to be declared when the asmAlarmThreshold specified is exceeded. | 1.3.6.1.4.1.351.110.1.2.1.1.5 | INTEGER {alarmMinor(1), alarmMajor(2)} | read-only | current |
| asmUnitMeasurable OBJECT-TYPE This object indicates if the alarm unit is measurable by the switch/system. | 1.3.6.1.4.1.351.110.1.2.1.1.6 | INTEGER {no(1), yes(2)} | read-only | current |
| asmUnitMeasuredValue OBJECT-TYPE This object gives the measured value of the entity addressed by asmAlarmNum. The value in this object is valid only if asmUnitMeasurable is set to 'yes'. This object contains value zero for asmUnitMeasurable value of 'no'. | 1.3.6.1.4.1.351.110.1.2.1.1.7 | Integer32 (0..2147483647) | read-only | current |
| asmPhysicalAlarmState OBJECT-TYPE This object indicates the status of the ASM alarm represented in this entry. It is a bitmap where a set bit indicates an abnormal condition. A reset bit signifies normal operation. | 1.3.6.1.4.1.351.110.1.2.1.1.8 | Integer32 (0..2147483647) | read-only | current |
| asmClrButton OBJECT-TYPE This object when set to asmAlarmClear(2),causes the alarm to be cleared. | 1.3.6.1.4.1.351.110.1.2.1.1.9 | INTEGER {asmAlarmNoAction(1), asmAlarmClear(2)} | read-write | current |
| asmNumOfValidEntries OBJECT-TYPE The number of valid asmAlarmTable entries (regardless of how many are actually configured) in the table. | 1.3.6.1.4.1.351.110.1.2.2 | Integer32 (0..100) | read-only | current |
| asmShelfAlarmState OBJECT-TYPE This object indicates whether any Shelf/Node Alarm has been declared in the system. | 1.3.6.1.4.1.351.110.1.2.3 | INTEGER {alarmOff(1), alarmOn(2)} | read-only | current |
| cmEnvmonMIBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.351.150.70.2 | |||
| cmEnvmonMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.351.150.70.2.1 | |||
| cmEnvmonMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.351.150.70.2.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| cmEnvmonInfoGroup OBJECT-GROUP The collection of objects which are used for providing information on environmental monitoring devices. | 1.3.6.1.4.1.351.150.70.2.1.1 | current |
| cmEnvmonGeneralGroup OBJECT-GROUP The collection of objects which are used for providing information on shelf level objects related to environmental monitoring devices. | 1.3.6.1.4.1.351.150.70.2.1.2 | current |
| cmEnvmonCompliance MODULE-COMPLIANCE The compliance statement for objects related to MGX82xx Environmental monitoring MIB. | 1.3.6.1.4.1.351.150.70.2.2.1 | current |