MIBs Depot

CISCO-MEDIA-QUALITY-MIB

Registered at
1.3.6.1.4.1.9.9.769
Last updated
2011-03-23 00:00
Organization
Cisco Systems, Inc.
Revisions
2011-03-23 00:00, 2011-03-22 00:00
Namespace
cisco
Source file
CISCO-MEDIA-QUALITY-MIB
Digest
sha256:981bb40e2f0b8d4849dccebd3054e0a960624f9a4f457a5a8554c9483da63ffd

Description

This MIB module enhances the DIAL-CONTROL-MIB (RFC2128) by providing call information and voice and video quality statistics of call legs over a telephony and voice over IP network. *** ABBREVIATIONS, ACRONYMS AND SYMBOLS *** ASP - Acoustic Shock Protection MIC - Microphone MOS - Mean Opinion Score NR - Noise Reduction TDM - Time-Division Multiplexing VOIP - Voice Over IP

Contact

Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-voice@cisco.com

Imports

FromSymbols
CISCO-DIAL-CONTROL-MIBcCallHistoryIndex
CISCO-SMIciscoMgmt
CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcCallReferenceIdOrZero, CvcCoderTypeRate, CvcGUid
DIAL-CONTROL-MIBcallActiveIndex, callActiveSetupTime
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

CISCO-DIAL-CONTROL-MIB
CISCO-MEDIA-QUALITY-MIB
CISCO-SMI
CISCO-VOICE-COMMON-DIAL-CONTROL-MIB
DIAL-CONTROL-MIB
IANAifType-MIB
IF-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
ciscoMediaQualityMIBNotifs
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.769.0
ciscoMediaQualityMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.769.1
cmqVoiceCallActive
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.769.1.1
cmqVoIPCallActiveTable
OBJECT-TYPE
This table is the VoIP extension to the callActiveTable of DIAL-CONTROL-MIB. It contains voice quality information and statistics for the VoIP call leg.
1.3.6.1.4.1.9.9.769.1.1.1not-accessiblecurrent
cmqVoIPCallActiveEntry
OBJECT-TYPE
An entry (conceptual row) in the cmqVoIPCallActiveTable. An entry into this table is created when its associated call active entry in the DIAL-CONTROL-MIB is created which has corresponding callActiveInfoType equals to 'speech'. The entry is deleted when its associated call active entry in the DIAL-CONTROL-MIB is deleted.
1.3.6.1.4.1.9.9.769.1.1.1.1not-accessiblecurrent
cmqVoIPCallActiveConnectionId
OBJECT-TYPE
The global connection identifier for the active VoIP leg of the call.
1.3.6.1.4.1.9.9.769.1.1.1.1.1CvcGUidread-onlycurrent
cmqVoIPCallActiveCallReferenceId
OBJECT-TYPE
The call reference ID associates the video call entry and voice call entry of the same endpoint. An audio-only call with a call reference ID of zero will not have a video call entry associated with it, although an audio-only call can also have a reference ID greater than zero.
1.3.6.1.4.1.9.9.769.1.1.1.1.2CvcCallReferenceIdOrZeroread-onlycurrent
cmqVoIPCallActiveRxCodecId
OBJECT-TYPE
The codec type of the endpoint for the established voice path.
1.3.6.1.4.1.9.9.769.1.1.1.1.3CvcCoderTypeRateread-onlycurrent
cmqVoIPCallActiveRxSevConcealRatioPct
OBJECT-TYPE
The ratio of severely concealed seconds to the sum of unimpaired seconds and concealed seconds.
1.3.6.1.4.1.9.9.769.1.1.1.1.4Unsigned32read-onlycurrent
cmqVoIPCallActiveRxCallConcealRatioPct
OBJECT-TYPE
The ratio of the recent concealment time to recent talk-mode time interval. The talk-mode interval is 3 seconds.
1.3.6.1.4.1.9.9.769.1.1.1.1.5Unsigned32read-onlycurrent
cmqVoIPCallActiveRxPktLossRatioPct
OBJECT-TYPE
The ratio of total effective received packet loss to the number of RTP packets expected.
1.3.6.1.4.1.9.9.769.1.1.1.1.6Unsigned32read-onlycurrent
cmqVoIPCallActiveRxRoundTripTime
OBJECT-TYPE
The round-trip delay is the sum of measured network delay plus transmit and receive endpoint processing delays.
1.3.6.1.4.1.9.9.769.1.1.1.1.7Unsigned32read-onlycurrent
cmqVoIPCallActiveRxCallDur
OBJECT-TYPE
Duration of receive path open from this peer to voice gateway for the call leg.
1.3.6.1.4.1.9.9.769.1.1.1.1.8Unsigned32read-onlycurrent
cmqVoIPCallActiveRxVoiceDur
OBJECT-TYPE
Duration of speech received from this peer to voice gateway for the call leg.
1.3.6.1.4.1.9.9.769.1.1.1.1.9Unsigned32read-onlycurrent
cmqVoIPCallActiveRxPktLossConcealDur
OBJECT-TYPE
The sum of error predictive concealment and bad protocol concealment in milliseconds.
1.3.6.1.4.1.9.9.769.1.1.1.1.10Unsigned32read-onlycurrent
cmqVoIPCallActiveRxPktCntExpected
OBJECT-TYPE
The expected number of packets to be received.
1.3.6.1.4.1.9.9.769.1.1.1.1.11Counter32read-onlycurrent
cmqVoIPCallActiveRxPktCntNotArrived
OBJECT-TYPE
The expected number of packets minus the number of received packets.
1.3.6.1.4.1.9.9.769.1.1.1.1.12Counter32read-onlycurrent
cmqVoIPCallActiveRxPktCntComfortNoise
OBJECT-TYPE
The number of received comfort noise packets for the call leg.
1.3.6.1.4.1.9.9.769.1.1.1.1.13Counter32read-onlycurrent
cmqVoIPCallActiveRxPktCntUnusableLate
OBJECT-TYPE
The number of received voice packets that arrived too late to playout with CODEC (Coder/Decoder) during the call.
1.3.6.1.4.1.9.9.769.1.1.1.1.14Counter32read-onlycurrent
cmqVoIPCallActiveRxPktCntDiscarded
OBJECT-TYPE
The sum of the number of late packets and the number of bad protocol packets.
1.3.6.1.4.1.9.9.769.1.1.1.1.15Counter32read-onlycurrent
cmqVoIPCallActiveRxPktCntEffLoss
OBJECT-TYPE
The total number of never-arrived packets and the number of discarded packets.
1.3.6.1.4.1.9.9.769.1.1.1.1.16Counter32read-onlycurrent
cmqVoIPCallActiveRxUnimpairedSecOK
OBJECT-TYPE
The cumulative number of seconds during which there was no concealment and is considered as OK seconds.
1.3.6.1.4.1.9.9.769.1.1.1.1.17Counter32read-onlycurrent
cmqVoIPCallActiveRxConcealSec
OBJECT-TYPE
The cumulative number of seconds during which there was some concealment.
1.3.6.1.4.1.9.9.769.1.1.1.1.18Counter32read-onlycurrent
cmqVoIPCallActiveRxSevConcealSec
OBJECT-TYPE
The total number of seconds that are severely concealed from the start of the voice stream. A severly concealed second has more than 50ms of concealment.
1.3.6.1.4.1.9.9.769.1.1.1.1.19Counter32read-onlycurrent
cmqVoIPCallActiveRxJBufMode
OBJECT-TYPE
The jitter buffer mode configured for the endpoint. adaptive (1): an adaptive size algorithm for jitter buffer, fixed (2): a fixed size algorithm for jitter buffer, unknown (3): an unknown size algorithm for jitter buffer, disabled (4): no jitter buffer is configured.
1.3.6.1.4.1.9.9.769.1.1.1.1.20INTEGER {adaptive(1), fixed(2), unknown(3), disabled(4)}read-onlycurrent
cmqVoIPCallActiveRxJBufNomDelay
OBJECT-TYPE
The nominal jitter buffer playout delay in milliseconds configured for the endpoint.
1.3.6.1.4.1.9.9.769.1.1.1.1.21Unsigned32read-onlycurrent
cmqVoIPCallActiveRxJBufDlyNow
OBJECT-TYPE
The playout delay buffer in milliseconds to accommodate interarrival jitter. The interarrival jitter is the network arrival jitter between consecutive frames measured at the receiver.
1.3.6.1.4.1.9.9.769.1.1.1.1.22Unsigned32read-onlycurrent
cmqVoIPCallActiveRxJBufLowWater
OBJECT-TYPE
The minimum jitter buffer playout delay in milliseconds configured for the endpoint.
1.3.6.1.4.1.9.9.769.1.1.1.1.23Unsigned32read-onlycurrent
cmqVoIPCallActiveRxJBuffHiWater
OBJECT-TYPE
The maximum jitter buffer playout delay in milliseconds configured for the endpoint.
1.3.6.1.4.1.9.9.769.1.1.1.1.24Unsigned32read-onlycurrent
cmqVoIPCallActive3550JShortTermAvg
OBJECT-TYPE
The instantaneous RFC3550 playout delay buffer in milliseconds to accommodate packet jitter.
1.3.6.1.4.1.9.9.769.1.1.1.1.25Unsigned32read-onlycurrent
cmqVoIPCallActive3550JCallAvg
OBJECT-TYPE
The long-term average of multiple RFC3550 playout delay buffer in milliseconds to accommodate packet jitter.
1.3.6.1.4.1.9.9.769.1.1.1.1.26Unsigned32read-onlycurrent
cmqVoIPCallActiveRxSignalLvl
OBJECT-TYPE
The instantaneous input signal level to the telephony interface (TDM to IP network) that is used by the call leg.
1.3.6.1.4.1.9.9.769.1.1.1.1.27Integer32read-onlycurrent
cmqVoIPCallActiveRxPred107Rscore
OBJECT-TYPE
The R-factor based MOS Listening Quality, which is listening quality minus clarity only, with no delay component. A value of 0 indicates an invalid score and a positive value indicates a valid score.
1.3.6.1.4.1.9.9.769.1.1.1.1.28Unsigned32read-onlycurrent
cmqVoIPCallActiveRxPred107RMosListen
OBJECT-TYPE
The MOS Listening Quality Estimate is computed on a running basis with a new value every 10 seconds of received speech. A value of 0 indicates an invalid score and a positive value indicates a valid score.
1.3.6.1.4.1.9.9.769.1.1.1.1.29Unsigned32read-onlycurrent
cmqVoIPCallActiveRxPred107RScoreConv
OBJECT-TYPE
The R-factor based MOS Conversation Quality, which is based on loss plus absolute delay. A value of 0 indicates an invalid score and a positive value indicates a valid score.
1.3.6.1.4.1.9.9.769.1.1.1.1.30Unsigned32read-onlycurrent
cmqVoIPCallActiveRxPred107RMosConv
OBJECT-TYPE
Th MOS Conversation Quality Estimate is computed on a running basis with a new value every 10 seconds of received speech. A value of 0 indicates an invalid score and a positive value indicates a valid score.
1.3.6.1.4.1.9.9.769.1.1.1.1.31Unsigned32read-onlycurrent
cmqVoIPCallActiveRxPred107CodecIeBase
OBJECT-TYPE
The base Ie score is a factor to calculate IeEff value. It is obtained from G.113 table according to the codec type and is defined in kilobits per second.
1.3.6.1.4.1.9.9.769.1.1.1.1.32Unsigned32read-onlycurrent
cmqVoIPCallActiveRxPred107CodecBPL
OBJECT-TYPE
The bpl is a factor to calculate IeEff value. It is obtained from G.113 table according to the codec type and is defined in kilobits per second.
1.3.6.1.4.1.9.9.769.1.1.1.1.33Unsigned32read-onlycurrent
cmqVoIPCallActiveRxPred107DefaultR0
OBJECT-TYPE
R0 is a factor based on signal-to-noise ratio which also includes loudness ratings.
1.3.6.1.4.1.9.9.769.1.1.1.1.34Unsigned32read-onlycurrent
cmqVoIPCallActiveRxPred107IeEff
OBJECT-TYPE
Ie-eff is one of the components to contribute to MOS R-factor calculations, where R-factor is based on ITU-T G.107. Ie is a component which depends on the real-time packet loss, where as Ie-eff stands for equipment impairment factor which includes codec type and packet loss.
1.3.6.1.4.1.9.9.769.1.1.1.1.35Unsigned32read-onlycurrent
cmqVoIPCallActiveRxPred107Idd
OBJECT-TYPE
Idd is one of the components to contribute to MOS R-factor calculations, where R-factor is based on ITU-T G.107. Idd is a delay impairment factor which depends on the real-time round trip delay and echo.
1.3.6.1.4.1.9.9.769.1.1.1.1.36Unsigned32read-onlycurrent
cmqVoIPCallActiveRxPredMosLqoAvg
OBJECT-TYPE
The statistical average MOS score of all the previous instantaneous values. A value of 0 indicates an invalid score and a positive value indicates a valid score.
1.3.6.1.4.1.9.9.769.1.1.1.1.37Unsigned32read-onlycurrent
cmqVoIPCallActiveRxPredMosLqoRecent
OBJECT-TYPE
The most recent MOS score with K-factor input based on frame loss and codec. A value of 0 indicates an invalid score and a positive value indicates a valid score.
1.3.6.1.4.1.9.9.769.1.1.1.1.38Unsigned32read-onlycurrent
cmqVoIPCallActiveRxPredMosLqoBaseline
OBJECT-TYPE
The maximum or codec zero-impairment baseline MOS score of all the previous instantaneous values. A value of 0 indicates an invalid score and a positive value indicates a valid score.
1.3.6.1.4.1.9.9.769.1.1.1.1.39Unsigned32read-onlycurrent
cmqVoIPCallActiveRxPredMosLqoMin
OBJECT-TYPE
The statistical minimum MOS score of all the previous instantaneous values. A value of 0 indicates an invalid score and a positive value indicates a valid score.
1.3.6.1.4.1.9.9.769.1.1.1.1.40Unsigned32read-onlycurrent
cmqVoIPCallActiveRxPredMosLqoNumWin
OBJECT-TYPE
A window in 8 seconds of frame loss data required to calculate the MOS estimate.
1.3.6.1.4.1.9.9.769.1.1.1.1.41Unsigned32read-onlycurrent
cmqVoIPCallActiveRxPredMosLqoBursts
OBJECT-TYPE
The MOS score calculated with K-factor input of consecutive frame loss events, or error bursts. A value of 0 indicates an invalid score and a positive value indicates a valid score.
1.3.6.1.4.1.9.9.769.1.1.1.1.42Unsigned32read-onlycurrent
cmqVoIPCallActiveRxPredMosLqoFrLoss
OBJECT-TYPE
The average frame loss count since call start.
1.3.6.1.4.1.9.9.769.1.1.1.1.43Unsigned32read-onlycurrent
cmqVoIPCallActiveRxPredMosLqoVerID
OBJECT-TYPE
The MOS K-factor version ID, e.g. CVTQ v0.95
1.3.6.1.4.1.9.9.769.1.1.1.1.44SnmpAdminString (SIZE(0..64))read-onlycurrent
cmqVoIPCallActiveTxCodecId
OBJECT-TYPE
The codec type of the endpoint for the established voice path.
1.3.6.1.4.1.9.9.769.1.1.1.1.45CvcCoderTypeRateread-onlycurrent
cmqVoIPCallActiveTxVadEnabled
OBJECT-TYPE
This flag indicates whether VAD (Voice Activation Detector) is enabled or disabled. A value of 'true' indicates enabled and a value of 'false' indicates disabled. Default is disabled.
1.3.6.1.4.1.9.9.769.1.1.1.1.46TruthValueread-onlycurrent
cmqVoIPCallActiveTxTmrCallDur
OBJECT-TYPE
Duration of transmit path open from this peer to voice gateway for the call leg.
1.3.6.1.4.1.9.9.769.1.1.1.1.47Unsigned32read-onlycurrent
cmqVoIPCallActiveTxTmrActSpeechDur
OBJECT-TYPE
Duration of speech transmitted from this peer to voice gateway for the call leg.
1.3.6.1.4.1.9.9.769.1.1.1.1.48Unsigned32read-onlycurrent
cmqVoIPCallActiveTxSignalLvl
OBJECT-TYPE
The instantaneous output signal level from the telephony interface (TDM to IP network) that is used by the call leg.
1.3.6.1.4.1.9.9.769.1.1.1.1.49Integer32read-onlycurrent
cmqVoIPCallActiveTxNoiseFloor
OBJECT-TYPE
The instantaneous noise floor level estimate if VAD is enabled.
1.3.6.1.4.1.9.9.769.1.1.1.1.50Integer32read-onlycurrent
cmqCommonCallActiveNRTable
OBJECT-TYPE
This table is the voice and VoIP extension to the callActiveTable of DIAL-CONTROL-MIB. It contains voice quality information and statistics when noise reduction is applied to the call leg.
1.3.6.1.4.1.9.9.769.1.1.2not-accessiblecurrent
cmqCommonCallActiveNREntry
OBJECT-TYPE
An entry (conceptual row) in the cmqCommonCallActiveNRTable. An entry into this table is created when its associated call active entry in the DIAL-CONTROL-MIB is created which has corresponding callActiveInfoType equals to 'speech'. The entry is deleted when its associated call active entry in the DIAL-CONTROL-MIB is deleted.
1.3.6.1.4.1.9.9.769.1.1.2.1not-accessiblecurrent
cmqCommonCallActiveNRConnectionId
OBJECT-TYPE
The global connection identifier for the active leg of the call.
1.3.6.1.4.1.9.9.769.1.1.2.1.1CvcGUidread-onlycurrent
cmqCommonCallActiveNRCallReferenceId
OBJECT-TYPE
The call reference ID associates the video call entry and voice call entry of the same endpoint. An audio-only call with a call reference ID of zero will not have a video call entry associated with it, although an audio-only call can also have a reference ID greater than zero.
1.3.6.1.4.1.9.9.769.1.1.2.1.2CvcCallReferenceIdOrZeroread-onlycurrent
cmqCommonCallActiveNRCallType
OBJECT-TYPE
This object indicates the call type of the active call leg. tdm(1): TDM call leg. voip (2): VoIP call leg.
1.3.6.1.4.1.9.9.769.1.1.2.1.3INTEGER {tdm(1), voip(2)}read-onlycurrent
cmqCommonCallActiveNREnabledMic
OBJECT-TYPE
This flag indicates whether noise reduction is enabled or disabled in the MIC direction. A value of 'true' for this object indicates enabled and a value of 'false' indicates disabled. Default is disabled.
1.3.6.1.4.1.9.9.769.1.1.2.1.4TruthValueread-onlycurrent
cmqCommonCallActiveNREnabledEar
OBJECT-TYPE
This flag indicates whether noise reduction is enabled or disabled in the ear direction. A value of 'true' for this object indicates enabled and a value of 'false' indicates disabled. Default is disabled.
1.3.6.1.4.1.9.9.769.1.1.2.1.5TruthValueread-onlycurrent
cmqCommonCallActiveNRDirMic
OBJECT-TYPE
This object indicates the direction to which noise reduction is applied in the network with respect to MIC. tdm (1): audio stream is from TDM, wan (2): audio stream is from WAN, lan (3): audio stream is from LAN.
1.3.6.1.4.1.9.9.769.1.1.2.1.6INTEGER {tdm(1), wan(2), lan(3)}read-onlycurrent
cmqCommonCallActiveNRDirEar
OBJECT-TYPE
This object indicates the direction to which noise reduction is applied in the network with respect to ear. tdm (1): audio stream is from TDM, wan (2): audio stream is from WAN, lan (3): audio stream is from LAN.
1.3.6.1.4.1.9.9.769.1.1.2.1.7INTEGER {tdm(1), wan(2), lan(3)}read-onlycurrent
cmqCommonCallActiveNRLibVer
OBJECT-TYPE
The library version of noise reduction module being used.
1.3.6.1.4.1.9.9.769.1.1.2.1.8Unsigned32read-onlycurrent
cmqCommonCallActiveNRIntensity
OBJECT-TYPE
The intensity of the noise reduction being applied to audio signals.
1.3.6.1.4.1.9.9.769.1.1.2.1.9Integer32 (0..6)read-onlycurrent
cmqCommonCallActivePreNRNoiseFloorEstMic
OBJECT-TYPE
The estimated noise floor level before noise redunction is applied in the MIC direction.
1.3.6.1.4.1.9.9.769.1.1.2.1.10Integer32read-onlycurrent
cmqCommonCallActivePostNRNoiseFloorEstMic
OBJECT-TYPE
The estimated noise floor level after noise redunction is applied in the MIC direction.
1.3.6.1.4.1.9.9.769.1.1.2.1.11Integer32read-onlycurrent
cmqCommonCallActivePreNRNoiseFloorEstEar
OBJECT-TYPE
The estimated noise floor level before noise redunction is applied in the ear direction.
1.3.6.1.4.1.9.9.769.1.1.2.1.12Integer32read-onlycurrent
cmqCommonCallActivePostNRNoiseFloorEstEar
OBJECT-TYPE
The estimated noise floor level after noise redunction is applied in the ear direction.
1.3.6.1.4.1.9.9.769.1.1.2.1.13Integer32read-onlycurrent
cmqCommonCallActiveASPTable
OBJECT-TYPE
This table is the voice and VoIP extension to the callActiveTable of DIAL-CONTROL-MIB. It contains voice quality information and statistics when acoustic shock protection is applied to the call leg.
1.3.6.1.4.1.9.9.769.1.1.3not-accessiblecurrent
cmqCommonCallActiveASPEntry
OBJECT-TYPE
An entry (conceptual row) in the cmqCommonCallActiveASPTable. An entry into this table is created when its associated call active entry in the DIAL-CONTROL-MIB is created which has corresponding callActiveInfoType equals to 'speech'. The entry is deleted when its associated call active entry in the DIAL-CONTROL-MIB is deleted.
1.3.6.1.4.1.9.9.769.1.1.3.1not-accessiblecurrent
cmqCommonCallActiveASPConnectionId
OBJECT-TYPE
The global connection identifier for the active leg of the call.
1.3.6.1.4.1.9.9.769.1.1.3.1.1CvcGUidread-onlycurrent
cmqCommonCallActiveASPCallReferenceId
OBJECT-TYPE
The call reference ID associates the video call entry and voice call entry of the same endpoint. An audio-only call with a call reference ID of zero will not have a video call entry associated with it, although an audio-only call can also have a reference ID greater than zero.
1.3.6.1.4.1.9.9.769.1.1.3.1.2CvcCallReferenceIdOrZeroread-onlycurrent
cmqCommonCallActiveASPCallType
OBJECT-TYPE
This object indicates the call type of the active call leg. tdm (1): TDM call leg. voip (2): VoIP call leg.
1.3.6.1.4.1.9.9.769.1.1.3.1.3INTEGER {tdm(1), voip(2)}read-onlycurrent
cmqCommonCallActiveASPEnabledMic
OBJECT-TYPE
This flag indicates whether acoustic shock protection is enabled or disabled in the MIC direction. A value of 'true' for this object indicates enabled and a value of 'false' indicates disabled. Default is disabled.
1.3.6.1.4.1.9.9.769.1.1.3.1.4TruthValueread-onlycurrent
cmqCommonCallActiveASPEnabledEar
OBJECT-TYPE
This flag indicates whether acoustic shock protection is enabled or disabled in the ear direction. A value of 'true' for this object indicates enabled and a value of 'false' indicates disabled. Default is disabled.
1.3.6.1.4.1.9.9.769.1.1.3.1.5TruthValueread-onlycurrent
cmqCommonCallActiveASPDirMic
OBJECT-TYPE
This object indicates the direction to which acoustic shock protection is applied in the network with respect to MIC. tdm (1): audio stream is from TDM, wan (2): audio stream is from WAN, lan (3): audio stream is from LAN.
1.3.6.1.4.1.9.9.769.1.1.3.1.6INTEGER {tdm(1), wan(2), lan(3)}read-onlycurrent
cmqCommonCallActiveASPDirEar
OBJECT-TYPE
This object indicates the direction to which acoustic shock protection is applied in the network with respect to ear. tdm (1): audio stream is from TDM, wan (2): audio stream is from WAN, lan (3): audio stream is from LAN.
1.3.6.1.4.1.9.9.769.1.1.3.1.7INTEGER {tdm(1), wan(2), lan(3)}read-onlycurrent
cmqCommonCallActiveASPMode
OBJECT-TYPE
The acoutsic shock protection mode indicates the sensitivity of operation. auto (1): default mode, a trade-off between slow and fast mode, slow (2): slower detection mode, fast (3): faster detection mode, expert (4): expert defined mode.
1.3.6.1.4.1.9.9.769.1.1.3.1.8INTEGER {auto(1), slow(2), fast(3), expert(4)}read-onlycurrent
cmqCommonCallActiveASPVer
OBJECT-TYPE
The version of acoustic shock protection applied to the audio signal.
1.3.6.1.4.1.9.9.769.1.1.3.1.9Unsigned32read-onlycurrent
cmqCommonCallActiveNumSigASPTriggMic
OBJECT-TYPE
The number of significant acoustic shock protection triggers which has a duration of greater than 2 seconds and is applied in the MIC direction.
1.3.6.1.4.1.9.9.769.1.1.3.1.10Unsigned32read-onlycurrent
cmqCommonCallActiveDurSigASPTriggMic
OBJECT-TYPE
The cumulative duration of all significant aooustic shock protection triggers in the MIC direction.
1.3.6.1.4.1.9.9.769.1.1.3.1.11Unsigned32read-onlycurrent
cmqCommonCallActiveTotNumASPTriggMic
OBJECT-TYPE
The total number of acoustic shock protection triggers in the MIC direction.
1.3.6.1.4.1.9.9.769.1.1.3.1.12Unsigned32read-onlycurrent
cmqCommonCallActiveTotASPDurMic
OBJECT-TYPE
The total duration of active acoustic shock protection suppression in milliseconds in the MIC direction.
1.3.6.1.4.1.9.9.769.1.1.3.1.13Unsigned32read-onlycurrent
cmqCommonCallActiveLoudestFreqEstForLongEpiMic
OBJECT-TYPE
The loudest frequency estimate for the longest acoustic shock protection episode in the MIC direction.
1.3.6.1.4.1.9.9.769.1.1.3.1.14Unsigned32read-onlycurrent
cmqCommonCallActiveLongestDurEpiMic
OBJECT-TYPE
The duration of the longest acoustic shock protection episode in the MIC direction.
1.3.6.1.4.1.9.9.769.1.1.3.1.15Unsigned32read-onlycurrent
cmqCommonCallActiveNumSigASPTriggEar
OBJECT-TYPE
The number of significant acoustic shock protection triggers which has a duration of greater than 2 seconds and is applied in the ear direction.
1.3.6.1.4.1.9.9.769.1.1.3.1.16Unsigned32read-onlycurrent
cmqCommonCallActiveDurSigASPTriggEar
OBJECT-TYPE
The cumulative duration of all significant aooustic shock protection triggers in the ear direction.
1.3.6.1.4.1.9.9.769.1.1.3.1.17Unsigned32read-onlycurrent
cmqCommonCallActiveTotNumASPTriggEar
OBJECT-TYPE
The total number of acoustic shock protection triggers in the ear direction.
1.3.6.1.4.1.9.9.769.1.1.3.1.18Unsigned32read-onlycurrent
cmqCommonCallActiveTotASPDurEar
OBJECT-TYPE
The total duration of active acoustic shock protection suppression in milliseconds in the ear direction.
1.3.6.1.4.1.9.9.769.1.1.3.1.19Unsigned32read-onlycurrent
cmqCommonCallActiveLoudestFreqEstForLongEpiEar
OBJECT-TYPE
The loudest frequency estimate for the longest acoustic shock protection episode in the ear direction.
1.3.6.1.4.1.9.9.769.1.1.3.1.20Unsigned32read-onlycurrent
cmqCommonCallActiveLongestDurEpiEar
OBJECT-TYPE
The duration of the longest acoustic shock protection episode in the ear direction.
1.3.6.1.4.1.9.9.769.1.1.3.1.21Unsigned32read-onlycurrent
cmqVoiceCallHistory
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.769.1.2
cmqVoIPCallHistoryTable
OBJECT-TYPE
This table is the VoIP extension to the cCallHistoryTable of CISCO-DIAL-CONTROL-MIB. It contains voice quality information and statistics for the VoIP call leg.
1.3.6.1.4.1.9.9.769.1.2.1not-accessiblecurrent
cmqVoIPCallHistoryEntry
OBJECT-TYPE
An entry (conceptual row) in the cmqVoIPCallHistoryTable. An entry into this table is created when its associated call history entry in the CISCO-DIAL-CONTROL-MIB is created which has corresponding cCallHistoryInfoType equals to 'speech'. The entry is deleted when its associated call history entry in the CISCO-DIAL-CONTROL-MIB is deleted.
1.3.6.1.4.1.9.9.769.1.2.1.1not-accessiblecurrent
cmqVoIPCallHistoryConnectionId
OBJECT-TYPE
The global connection identifier for the VoIP leg of the call.
1.3.6.1.4.1.9.9.769.1.2.1.1.1CvcGUidread-onlycurrent
cmqVoIPCallHistoryCallReferenceId
OBJECT-TYPE
The call reference ID associates the video call entry and voice call entry of the same endpoint. An audio-only call with a call reference ID of zero will not have a video call entry associated with it, although an audio-only call can also have a reference ID greater than zero.
1.3.6.1.4.1.9.9.769.1.2.1.1.2CvcCallReferenceIdOrZeroread-onlycurrent
cmqVoIPCallHistoryRxCodecId
OBJECT-TYPE
The codec type of the endpoint for the established voice path.
1.3.6.1.4.1.9.9.769.1.2.1.1.3CvcCoderTypeRateread-onlycurrent
cmqVoIPCallHistoryRxSevConcealRatioPct
OBJECT-TYPE
The ratio of severely concealed seconds to the sum of unimpaired seconds and concealed seconds.
1.3.6.1.4.1.9.9.769.1.2.1.1.4Unsigned32read-onlycurrent
cmqVoIPCallHistoryRxCallConcealRatioPct
OBJECT-TYPE
The ratio of the recent concealment time to recent talk-mode time interval. The talk-mode interval is 3 seconds.
1.3.6.1.4.1.9.9.769.1.2.1.1.5Unsigned32read-onlycurrent
cmqVoIPCallHistoryRxPktLossRatioPct
OBJECT-TYPE
The ratio of total effective received packet loss to the number of RTP packets expected.
1.3.6.1.4.1.9.9.769.1.2.1.1.6Unsigned32read-onlycurrent
cmqVoIPCallHistoryRxRoundTripTime
OBJECT-TYPE
The round-trip delay is the sum of measured network delay plus transmit and receive endpoint processing delays.
1.3.6.1.4.1.9.9.769.1.2.1.1.7Unsigned32read-onlycurrent
cmqVoIPCallHistoryRxCallDur
OBJECT-TYPE
Duration of receive path open from this peer to voice gateway for the call leg.
1.3.6.1.4.1.9.9.769.1.2.1.1.8Unsigned32read-onlycurrent
cmqVoIPCallHistoryRxVoiceDur
OBJECT-TYPE
Duration of speech received from this peer to voice gateway for the call leg.
1.3.6.1.4.1.9.9.769.1.2.1.1.9Unsigned32read-onlycurrent
cmqVoIPCallHistoryRxPktLossConcealDur
OBJECT-TYPE
The sum of error predictive concealment and bad protocol concealment in milliseconds.
1.3.6.1.4.1.9.9.769.1.2.1.1.10Unsigned32read-onlycurrent
cmqVoIPCallHistoryRxPktCntExpected
OBJECT-TYPE
The expected number of packets to be received.
1.3.6.1.4.1.9.9.769.1.2.1.1.11Counter32read-onlycurrent
cmqVoIPCallHistoryRxPktCntNotArrived
OBJECT-TYPE
The expected number of packets minus the number of received packets.
1.3.6.1.4.1.9.9.769.1.2.1.1.12Counter32read-onlycurrent
cmqVoIPCallHistoryRxPktCntComfortNoise
OBJECT-TYPE
The number of received comfort noise packets for the call leg.
1.3.6.1.4.1.9.9.769.1.2.1.1.13Counter32read-onlycurrent
cmqVoIPCallHistoryRxPktCntUnusableLate
OBJECT-TYPE
The number of received voice packets that arrived too late to playout with CODEC (Coder/Decoder) during the call.
1.3.6.1.4.1.9.9.769.1.2.1.1.14Counter32read-onlycurrent
cmqVoIPCallHistoryRxPktCntDiscarded
OBJECT-TYPE
The sum of the number of late packets and the number of bad protocol packets.
1.3.6.1.4.1.9.9.769.1.2.1.1.15Counter32read-onlycurrent
cmqVoIPCallHistoryRxPktCntEffLoss
OBJECT-TYPE
The total number of never-arrived packets and the number of discarded packets.
1.3.6.1.4.1.9.9.769.1.2.1.1.16Counter32read-onlycurrent
cmqVoIPCallHistoryRxUnimpairedSecOK
OBJECT-TYPE
The cumulative number of seconds during which there was no concealment and is considered as OK seconds.
1.3.6.1.4.1.9.9.769.1.2.1.1.17Counter32read-onlycurrent
cmqVoIPCallHistoryRxConcealSec
OBJECT-TYPE
The cumulative number of seconds during which there was some concealment.
1.3.6.1.4.1.9.9.769.1.2.1.1.18Counter32read-onlycurrent
cmqVoIPCallHistoryRxSevConcealSec
OBJECT-TYPE
The total number of seconds that are severely concealed from the start of the voice stream. A severly concealed second has more than 50ms of concealment.
1.3.6.1.4.1.9.9.769.1.2.1.1.19Counter32read-onlycurrent
cmqVoIPCallHistoryRxJBufMode
OBJECT-TYPE
The jitter buffer mode configured for the endpoint. adaptive(1): an adaptive size algorithm for jitter buffer, fixed (2): a fixed size algorithm for jitter buffer, unknown (3): an unknown size algorithm for jitter buffer, disabled (4): no jitter buffer is configured.
1.3.6.1.4.1.9.9.769.1.2.1.1.20INTEGER {adaptive(1), fixed(2), unknown(3), disabled(4)}read-onlycurrent
cmqVoIPCallHistoryRxJBufNomDelay
OBJECT-TYPE
The nominal jitter buffer playout delay in milliseconds configured for the endpoint.
1.3.6.1.4.1.9.9.769.1.2.1.1.21Unsigned32read-onlycurrent
cmqVoIPCallHistoryRxJBufDlyNow
OBJECT-TYPE
The playout delay buffer in milliseconds to accommodate interarrival jitter. The interarrival jitter is the network arrival jitter between consecutive frames measured at the receiver.
1.3.6.1.4.1.9.9.769.1.2.1.1.22Unsigned32read-onlycurrent
cmqVoIPCallHistoryRxJBufLowWater
OBJECT-TYPE
The minimum jitter buffer playout delay in milliseconds configured for the endpoint.
1.3.6.1.4.1.9.9.769.1.2.1.1.23Unsigned32read-onlycurrent
cmqVoIPCallHistoryRxJBuffHiWater
OBJECT-TYPE
The maximum jitter buffer playout delay in milliseconds configured for the endpoint.
1.3.6.1.4.1.9.9.769.1.2.1.1.24Unsigned32read-onlycurrent
cmqVoIPCallHistory3550JShortTermAvg
OBJECT-TYPE
The instantaneous RFC3550 playout delay buffer in milliseconds to accommodate packet jitter.
1.3.6.1.4.1.9.9.769.1.2.1.1.25Unsigned32read-onlycurrent
cmqVoIPCallHistory3550JCallAvg
OBJECT-TYPE
The long-term average of multiple RFC3550 playout delay buffer in milliseconds to accommodate packet jitter.
1.3.6.1.4.1.9.9.769.1.2.1.1.26Unsigned32read-onlycurrent
cmqVoIPCallHistoryRxSignalLvl
OBJECT-TYPE
The instantaneous input signal level to the telephony interface (TDM to IP network) that is used by the call leg.
1.3.6.1.4.1.9.9.769.1.2.1.1.27Integer32read-onlycurrent
cmqVoIPCallHistoryRxPred107Rscore
OBJECT-TYPE
The R-factor based MOS Listening Quality, which is listening quality minus clarity only, with no delay component. A value of 0 indicates an invalid score and a positive value indicates a valid score.
1.3.6.1.4.1.9.9.769.1.2.1.1.28Unsigned32read-onlycurrent
cmqVoIPCallHistoryRxPred107RMosListen
OBJECT-TYPE
The MOS Listening Quality Estimate is computed on a running basis with a new value every 10 seconds of received speech. A value of 0 indicates an invalid score and a positive value indicates a valid score.
1.3.6.1.4.1.9.9.769.1.2.1.1.29Unsigned32read-onlycurrent
cmqVoIPCallHistoryRxPred107RScoreConv
OBJECT-TYPE
The R-factor based MOS Conversation Quality, which is based on loss plus absolute delay. A value of 0 indicates an invalid score and a positive value indicates a valid score.
1.3.6.1.4.1.9.9.769.1.2.1.1.30Unsigned32read-onlycurrent
cmqVoIPCallHistoryRxPred107RMosConv
OBJECT-TYPE
Th MOS Conversation Quality Estimate is computed on a running basis with a new value every 10 seconds of received speech. A value of 0 indicates an invalid score and a positive value indicates a valid score.
1.3.6.1.4.1.9.9.769.1.2.1.1.31Unsigned32read-onlycurrent
cmqVoIPCallHistoryRxPred107CodecIeBase
OBJECT-TYPE
The base Ie score is a factor to calculate IeEff value. It is obtained from G.113 table according to the codec type and is defined in killobits per second.
1.3.6.1.4.1.9.9.769.1.2.1.1.32Unsigned32read-onlycurrent
cmqVoIPCallHistoryRxPred107CodecBPL
OBJECT-TYPE
The bpl is a factor to calculate IeEff value. It is obtained from G.113 table according to the codec type and is defined in kilobits per second.
1.3.6.1.4.1.9.9.769.1.2.1.1.33Unsigned32read-onlycurrent
cmqVoIPCallHistoryRxPred107DefaultR0
OBJECT-TYPE
R0 is a factor based on signal-to-noise ratio which also includes loudness ratings.
1.3.6.1.4.1.9.9.769.1.2.1.1.34Unsigned32read-onlycurrent
cmqVoIPCallHistoryRxPred107IeEff
OBJECT-TYPE
Ie-eff is one of the components to contribute to MOS R-factor calculations, where R-factor is based on ITU-T G.107. Ie is a component which depends on the real-time packet loss, where as Ie-eff stands for equipment impairment factor which includes codec type and packet loss.
1.3.6.1.4.1.9.9.769.1.2.1.1.35Unsigned32read-onlycurrent
cmqVoIPCallHistoryRxPred107Idd
OBJECT-TYPE
Idd is one of the components to contribute to MOS R-factor calculations, where R-factor is based on ITU-T G.107. Idd is a delay impairment factor which depends on the real-time round trip delay and echo.
1.3.6.1.4.1.9.9.769.1.2.1.1.36Unsigned32read-onlycurrent
cmqVoIPCallHistoryRxPredMosLqoAvg
OBJECT-TYPE
The statistical average MOS score of all the previous instantaneous values. A value of 0 indicates an invalid score and a positive value indicates a valid score.
1.3.6.1.4.1.9.9.769.1.2.1.1.37Unsigned32read-onlycurrent
cmqVoIPCallHistoryRxPredMosLqoRecent
OBJECT-TYPE
The most recent MOS score with K-factor input based on frame loss and codec. A value of 0 indicates an invalid score and a positive value indicates a valid score.
1.3.6.1.4.1.9.9.769.1.2.1.1.38Unsigned32read-onlycurrent
cmqVoIPCallHistoryRxPredMosLqoBaseline
OBJECT-TYPE
The maximum or codec zero-impairment baseline MOS score of all the previous instantaneous values. A value of 0 indicates an invalid score and a positive value indicates a valid score.
1.3.6.1.4.1.9.9.769.1.2.1.1.39Unsigned32read-onlycurrent
cmqVoIPCallHistoryRxPredMosLqoMin
OBJECT-TYPE
The statistical minimum MOS score of all the previous instantaneous values. A value of 0 indicates an invalid score and a positive value indicates a valid score.
1.3.6.1.4.1.9.9.769.1.2.1.1.40Unsigned32read-onlycurrent
cmqVoIPCallHistoryRxPredMosLqoNumWin
OBJECT-TYPE
A window in 8 seconds of frame loss data required to calculate the MOS estimate.
1.3.6.1.4.1.9.9.769.1.2.1.1.41Unsigned32read-onlycurrent
cmqVoIPCallHistoryRxPredMosLqoBursts
OBJECT-TYPE
The MOS score calculated with K-factor input of consecutive frame loss events, or error bursts. A value of 0 indicates an invalid score and a positive value indicates a valid score.
1.3.6.1.4.1.9.9.769.1.2.1.1.42Unsigned32read-onlycurrent
cmqVoIPCallHistoryRxPredMosLqoFrLoss
OBJECT-TYPE
The average frame loss count since call start.
1.3.6.1.4.1.9.9.769.1.2.1.1.43Unsigned32read-onlycurrent
cmqVoIPCallHistoryRxPredMosLqoVerID
OBJECT-TYPE
The MOS K-factor version ID, e.g. CVTQ v0.95
1.3.6.1.4.1.9.9.769.1.2.1.1.44SnmpAdminString (SIZE(0..64))read-onlycurrent
cmqVoIPCallHistoryTxCodecId
OBJECT-TYPE
The codec type of the endpoint for the established voice path.
1.3.6.1.4.1.9.9.769.1.2.1.1.45CvcCoderTypeRateread-onlycurrent
cmqVoIPCallHistoryTxVadEnabled
OBJECT-TYPE
This flag indicates whether VAD (Voice Activation Detector) is enabled or disabled. A value of 'true' indicates enabled and a value of 'false' indicates disabled. Default is disabled.
1.3.6.1.4.1.9.9.769.1.2.1.1.46TruthValueread-onlycurrent
cmqVoIPCallHistoryTxTmrCallDur
OBJECT-TYPE
Duration of transmit path open from this peer to voice gateway for the call leg.
1.3.6.1.4.1.9.9.769.1.2.1.1.47Unsigned32read-onlycurrent
cmqVoIPCallHistoryTxTmrActSpeechDur
OBJECT-TYPE
Duration of speech transmitted from this peer to voice gateway for the call leg.
1.3.6.1.4.1.9.9.769.1.2.1.1.48Unsigned32read-onlycurrent
cmqVoIPCallHistoryTxSignalLvl
OBJECT-TYPE
The instantaneous output signal level from the telephony interface (TDM to IP network) that is used by the call leg.
1.3.6.1.4.1.9.9.769.1.2.1.1.49Integer32read-onlycurrent
cmqVoIPCallHistoryTxNoiseFloor
OBJECT-TYPE
The instantaneous noise floor level estimate if VAD is enabled.
1.3.6.1.4.1.9.9.769.1.2.1.1.50Integer32read-onlycurrent
cmqCommonCallHistoryNRTable
OBJECT-TYPE
This table is the voice and VoIP extension to the cCallHistoryTable of CISCO-DIAL-CONTROL-MIB. It contains voice quality information and statistics when noise reduction is applied to the call leg.
1.3.6.1.4.1.9.9.769.1.2.2not-accessiblecurrent
cmqCommonCallHistoryNREntry
OBJECT-TYPE
An entry (conceptual row) in the cmqCommonCallHistoryTable. An entry into this table is created when its associated call history entry in the CISCO-DIAL-CONTROL-MIB is created which has corresponding cCallHistoryInfoType equals to 'speech'. The entry is deleted when its associated call history entry in the CISCO-DIAL-CONTROL-MIB is deleted.
1.3.6.1.4.1.9.9.769.1.2.2.1not-accessiblecurrent
cmqCommonCallHistoryNRConnectionId
OBJECT-TYPE
The global connection identifier for the history leg of the call.
1.3.6.1.4.1.9.9.769.1.2.2.1.1CvcGUidread-onlycurrent
cmqCommonCallHistoryNRCallReferenceId
OBJECT-TYPE
The call reference ID associates the video call entry and voice call entry of the same endpoint. An audio-only call with a call reference ID of zero will not have a video call entry associated with it, although an audio-only call can also have a reference ID greater than zero.
1.3.6.1.4.1.9.9.769.1.2.2.1.2CvcCallReferenceIdOrZeroread-onlycurrent
cmqCommonCallHistoryNRCallType
OBJECT-TYPE
This object indicates the call type of the history call leg. tdm (1): TDM call leg. voip (2): VoIP call leg.
1.3.6.1.4.1.9.9.769.1.2.2.1.3INTEGER {tdm(1), voip(2)}read-onlycurrent
cmqCommonCallHistoryNREnabledMic
OBJECT-TYPE
This flag indicates whether noise reduction is enabled or disabled in the MIC direction. A value of 'true' for this object indicates enabled and a value of 'false' indicates disabled. Default is disabled.
1.3.6.1.4.1.9.9.769.1.2.2.1.4TruthValueread-onlycurrent
cmqCommonCallHistoryNREnabledEar
OBJECT-TYPE
This flag indicates whether noise reduction is enabled or disabled in the ear direction. A value of 'true' for this object indicates enabled and a value of 'false' indicates disabled. Default is disabled.
1.3.6.1.4.1.9.9.769.1.2.2.1.5TruthValueread-onlycurrent
cmqCommonCallHistoryNRDirMic
OBJECT-TYPE
This object indicates the direction to which noise reduction is applied in the network with respect to MIC. tdm (1): audio stream is from TDM, wan (2): audio stream is from WAN, lan (3): audio stream is from LAN.
1.3.6.1.4.1.9.9.769.1.2.2.1.6INTEGER {tdm(1), wan(2), lan(3)}read-onlycurrent
cmqCommonCallHistoryNRDirEar
OBJECT-TYPE
This object indicates the direction to which noise reduction is applied in the network with respect to ear. tdm (1): audio stream is from TDM, wan (2): audio stream is from WAN, lan (3): audio stream is from LAN.
1.3.6.1.4.1.9.9.769.1.2.2.1.7INTEGER {tdm(1), wan(2), lan(3)}read-onlycurrent
cmqCommonCallHistoryNRLibVer
OBJECT-TYPE
The library version of noise reduction module being used.
1.3.6.1.4.1.9.9.769.1.2.2.1.8Unsigned32read-onlycurrent
cmqCommonCallHistoryNRIntensity
OBJECT-TYPE
The intensity of the noise reduction being applied to audio signals.
1.3.6.1.4.1.9.9.769.1.2.2.1.9Integer32 (0..6)read-onlycurrent
cmqCommonCallHistoryPreNRNoiseFloorEstMic
OBJECT-TYPE
The estimated noise floor level before noise redunction is applied in the MIC direction.
1.3.6.1.4.1.9.9.769.1.2.2.1.10Integer32read-onlycurrent
cmqCommonCallHistoryPostNRNoiseFloorEstMic
OBJECT-TYPE
The estimated noise floor level after noise redunction is applied in the MIC direction.
1.3.6.1.4.1.9.9.769.1.2.2.1.11Integer32read-onlycurrent
cmqCommonCallHistoryPreNRNoiseFloorEstEar
OBJECT-TYPE
The estimated noise floor level before noise redunction is applied in the ear direction.
1.3.6.1.4.1.9.9.769.1.2.2.1.12Integer32read-onlycurrent
cmqCommonCallHistoryPostNRNoiseFloorEstEar
OBJECT-TYPE
The estimated noise floor level after noise redunction is applied in the ear direction.
1.3.6.1.4.1.9.9.769.1.2.2.1.13Integer32read-onlycurrent
cmqCommonCallHistoryASPTable
OBJECT-TYPE
This table is the voice and VoIP extension to the cCallHistoryTable of CISCO-DIAL-CONTROL-MIB. It contains voice quality information and statistics when acoustic shock protection is applied to the call leg.
1.3.6.1.4.1.9.9.769.1.2.3not-accessiblecurrent
cmqCommonCallHistoryASPEntry
OBJECT-TYPE
An entry (conceptual row) in the cmqCommonCallHistoryTable. An entry into this table is created when its associated call history entry in the CISCO-DIAL-CONTROL-MIB is created which has corresponding cCallHistoryInfoType equals to 'speech'. The entry is deleted when its associated call history entry in the CISCO-DIAL-CONTROL-MIB is deleted.
1.3.6.1.4.1.9.9.769.1.2.3.1not-accessiblecurrent
cmqCommonCallHistoryASPConnectionId
OBJECT-TYPE
The global connection identifier for the history leg of the call.
1.3.6.1.4.1.9.9.769.1.2.3.1.1CvcGUidread-onlycurrent
cmqCommonCallHistoryASPCallReferenceId
OBJECT-TYPE
The call reference ID associates the video call entry and voice call entry of the same endpoint. An audio-only call with a call reference ID of zero will not have a video call entry associated with it, although an audio-only call can also have a reference ID greater than zero.
1.3.6.1.4.1.9.9.769.1.2.3.1.2CvcCallReferenceIdOrZeroread-onlycurrent
cmqCommonCallHistoryASPCallType
OBJECT-TYPE
This object indicates the call type of the history call leg. tdm (1): TDM call leg voip (2): VoIP call leg.
1.3.6.1.4.1.9.9.769.1.2.3.1.3INTEGER {tdm(1), voip(2)}read-onlycurrent
cmqCommonCallHistoryASPEnabledMic
OBJECT-TYPE
This flag indicates whether acoustic shock protection is enabled or disabled in the MIC direction. A value of 'true' for this object indicates enabled and a value of 'false' indicates disabled. Default is disabled.
1.3.6.1.4.1.9.9.769.1.2.3.1.4TruthValueread-onlycurrent
cmqCommonCallHistoryASPEnabledEar
OBJECT-TYPE
This flag indicates whether acoustic shock protection is enabled or disabled in the ear direction. A value of 'true' for this object indicates enabled and a value of 'false' indicates disabled. Default is disabled.
1.3.6.1.4.1.9.9.769.1.2.3.1.5TruthValueread-onlycurrent
cmqCommonCallHistoryASPDirMic
OBJECT-TYPE
This object indicates the direction to which acoustic shock protection is applied in the network with respect to MIC. tdm (1): audio stream is from TDM, wan (2): audio stream is from WAN, lan (3): audio stream is from LAN.
1.3.6.1.4.1.9.9.769.1.2.3.1.6INTEGER {tdm(1), wan(2), lan(3)}read-onlycurrent
cmqCommonCallHistoryASPDirEar
OBJECT-TYPE
This object indicates the direction to which acoustic shock protection is applied in the network with respect to ear. tdm (1): audio stream is from TDM, wan (2): audio stream is from WAN, lan (3): audio stream is from LAN.
1.3.6.1.4.1.9.9.769.1.2.3.1.7INTEGER {tdm(1), wan(2), lan(3)}read-onlycurrent
cmqCommonCallHistoryASPMode
OBJECT-TYPE
The acoutsic shock protection mode indicates the sensitivity of operation. auto (1): default mode, a trade-off between slow and fast mode, slow (2): slower detection mode, fast (3): faster detection mode, expert (4): expert defined mode.
1.3.6.1.4.1.9.9.769.1.2.3.1.8INTEGER {auto(1), slow(2), fast(3), expert(4)}read-onlycurrent
cmqCommonCallHistoryASPVer
OBJECT-TYPE
The version of acoutsic shock protection applied to audio signals.
1.3.6.1.4.1.9.9.769.1.2.3.1.9Integer32read-onlycurrent
cmqCommonCallHistoryNumSigASPTriggMic
OBJECT-TYPE
The number of significant acoustic shock protection triggers which has a duration of greater than 2 seconds and is applied in the MIC direction.
1.3.6.1.4.1.9.9.769.1.2.3.1.10Unsigned32read-onlycurrent
cmqCommonCallHistoryDurSigASPTriggMic
OBJECT-TYPE
The cumulative duration of all significant aooustic shock protection triggers in the MIC direction.
1.3.6.1.4.1.9.9.769.1.2.3.1.11Unsigned32read-onlycurrent
cmqCommonCallHistoryTotNumASPTriggMic
OBJECT-TYPE
The total number of acoustic shock protection triggers in the MIC direction.
1.3.6.1.4.1.9.9.769.1.2.3.1.12Unsigned32read-onlycurrent
cmqCommonCallHistoryTotASPDurMic
OBJECT-TYPE
The total duration of acoustic shock protection suppression in milliseconds in the MIC direction.
1.3.6.1.4.1.9.9.769.1.2.3.1.13Unsigned32read-onlycurrent
cmqCommonCallHistoryLoudestFreqEstForLongEpiMic
OBJECT-TYPE
The loudest frequency estimate for the longest acoustic shock protection episode in the MIC direction.
1.3.6.1.4.1.9.9.769.1.2.3.1.14Unsigned32read-onlycurrent
cmqCommonCallHistoryLongestDurEpiMic
OBJECT-TYPE
The duration of the longest acoustic shock protection episode in the MIC direction.
1.3.6.1.4.1.9.9.769.1.2.3.1.15Unsigned32read-onlycurrent
cmqCommonCallHistoryNumSigASPTriggEar
OBJECT-TYPE
The number of significant acoustic shock protection triggers which has a duration of greater than 2 seconds and is applied in the ear direction.
1.3.6.1.4.1.9.9.769.1.2.3.1.16Unsigned32read-onlycurrent
cmqCommonCallHistoryDurSigASPTriggEar
OBJECT-TYPE
The cumulative duration of all significant aooustic shock protection triggers in the ear direction.
1.3.6.1.4.1.9.9.769.1.2.3.1.17Unsigned32read-onlycurrent
cmqCommonCallHistoryTotNumASPTriggEar
OBJECT-TYPE
The total number of acoustic shock protection triggers in the ear direction.
1.3.6.1.4.1.9.9.769.1.2.3.1.18Unsigned32read-onlycurrent
cmqCommonCallHistoryTotASPDurEar
OBJECT-TYPE
The total duration of acoustic shock protection suppression in milliseconds in the ear direction.
1.3.6.1.4.1.9.9.769.1.2.3.1.19Unsigned32read-onlycurrent
cmqCommonCallHistoryLoudestFreqEstForLongEpiEar
OBJECT-TYPE
The loudest frequency estimate for the longest acoustic shock protection episode in the ear direction.
1.3.6.1.4.1.9.9.769.1.2.3.1.20Unsigned32read-onlycurrent
cmqCommonCallHistoryLongestDurEpiEar
OBJECT-TYPE
The duration of the longest acoustic shock protection episode in the ear direction.
1.3.6.1.4.1.9.9.769.1.2.3.1.21Unsigned32read-onlycurrent
cmqVideoCallActive
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.769.1.3
cmqVideoCallActiveTable
OBJECT-TYPE
This table is the video extension to the call active table of DIAL-CONTROL-MIB. It contains video quality information for the VoIP call leg.
1.3.6.1.4.1.9.9.769.1.3.1not-accessiblecurrent
cmqVideoCallActiveEntry
OBJECT-TYPE
An entry (conceptual row) in the cmqVideoCallActiveTable. An entry is added to the table when the below conditions are met: 1. A call active entry in callActiveTable of the IETF Dial Control MIB with video callActiveInfoType is created. 2. An entry in cVideoCommonActiveTable of the Cisco Video Session MIB is created whose cVideoCommonActiveCallType is pointToPointCall, conferenceCall, or monitoredCall. The entry is deleted when its associated call active entry in callActiveTable of the IETF Dial Control MIB is deleted.
1.3.6.1.4.1.9.9.769.1.3.1.1not-accessiblecurrent
cmqVideoCallActiveConnectionId
OBJECT-TYPE
The global connection identifier for the video leg of the call.
1.3.6.1.4.1.9.9.769.1.3.1.1.1CvcGUidread-onlycurrent
cmqVideoCallActiveCallReferenceId
OBJECT-TYPE
The call reference ID associates the video call entry and voice call entry of the same endpoint.
1.3.6.1.4.1.9.9.769.1.3.1.1.2CvcCallReferenceIdOrZeroread-onlycurrent
cmqVideoCallActiveRxMOSInstant
OBJECT-TYPE
Instantaneous aggregated MOS in the receive direction, where 0 is an invalid score and the lowest score starts with 1. A value of 100 indicates the best video quality.
1.3.6.1.4.1.9.9.769.1.3.1.1.3Unsigned32 (0..100)read-onlycurrent
cmqVideoCallActiveRxCompressDegradeInstant
OBJECT-TYPE
The percentage of quality loss (indicated by RX instantaneous MOS) due to the initial compression of video at an end point introduced by a video encoder.
1.3.6.1.4.1.9.9.769.1.3.1.1.4Unsigned32 (0..100)read-onlycurrent
cmqVideoCallActiveRxNetworkDegradeInstant
OBJECT-TYPE
The percentage of quality loss (indicated by RX instantaneous MOS) due to network factors, such as jitter, delay and packet loss.
1.3.6.1.4.1.9.9.769.1.3.1.1.5Unsigned32 (0..100)read-onlycurrent
cmqVideoCallActiveRxTransscodeDegradeInstant
OBJECT-TYPE
The percentage of quality loss (indicated by RX instantaneous MOS) due to the transcoding, including transrating, of a video stream.
1.3.6.1.4.1.9.9.769.1.3.1.1.6Unsigned32 (0..100)read-onlycurrent
cmqVideoCallActiveRxMOSAverage
OBJECT-TYPE
Average aggregated MOS in the receive direction since the beginning of the video session. 0 indicates an invalid score and the lowest score starts with 1. A value of 100 indicates the best video quality.
1.3.6.1.4.1.9.9.769.1.3.1.1.7Unsigned32 (0..100)read-onlycurrent
cmqVideoCallActiveRxCompressDegradeAverage
OBJECT-TYPE
The percentage of quality loss (indicated by RX average MOS) due to the initial compression of video at an end point introduced by a video encoder.
1.3.6.1.4.1.9.9.769.1.3.1.1.8Unsigned32 (0..100)read-onlycurrent
cmqVideoCallActiveRxNetworkDegradeAverage
OBJECT-TYPE
The percentage of quality loss (indicated by RX average MOS) due to network factors, such as jitter, delay and packet loss.
1.3.6.1.4.1.9.9.769.1.3.1.1.9Unsigned32 (0..100)read-onlycurrent
cmqVideoCallActiveRxTransscodeDegradeAverage
OBJECT-TYPE
The percentage of quality loss (indicated by RX average MOS) due to the transcoding, including transrating, of a video stream.
1.3.6.1.4.1.9.9.769.1.3.1.1.10Unsigned32 (0..100)read-onlycurrent
cmqVideoCallHistory
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.769.1.4
cmqVideoCallHistoryTable
OBJECT-TYPE
This table is the video extension to the call history table of CISCO-DIAL-CONTROL-MIB. It contains video quality information for the VoIP call leg.
1.3.6.1.4.1.9.9.769.1.4.1not-accessiblecurrent
cmqVideoCallHistoryEntry
OBJECT-TYPE
An entry (conceptual row) in the cmqVideoCallHistoryTable. An entry is added to the table when the below conditions are met: 1. A call history entry in cCallHistoryTable of the Cisco Dial Control MIB with video cCallHistoryInfoType is created. 2. An entry in cVideoCommonActiveTable of the Cisco Video Session MIB is created whose cVideoCommonActiveCallType is pointToPointCall, conferenceCall, or monitoredCall. The entry is deleted when its associated call history entriy in cCallHistoryTable of the Cisco Dial Control MIB is deleted.
1.3.6.1.4.1.9.9.769.1.4.1.1not-accessiblecurrent
cmqVideoCallHistoryConnectionId
OBJECT-TYPE
The global connection identifier for the video leg of the call.
1.3.6.1.4.1.9.9.769.1.4.1.1.1CvcGUidread-onlycurrent
cmqVideoCallHistoryCallReferenceId
OBJECT-TYPE
The call reference ID associates the video call entry and voice call entry of the same endpoint.
1.3.6.1.4.1.9.9.769.1.4.1.1.2CvcCallReferenceIdOrZeroread-onlycurrent
cmqVideoCallHistoryRxMOSAverage
OBJECT-TYPE
Average aggregated MOS in the receive direction since the beginning of the video session. 0 indicates an invalid score and the lowest score starts with 1. A value of 100 indicates the best video quality.
1.3.6.1.4.1.9.9.769.1.4.1.1.3Unsigned32 (0..100)read-onlycurrent
cmqVideoCallHistoryRxCompressDegradeAverage
OBJECT-TYPE
The percentage of quality loss (indicated by RX average MOS) due to the initial compression of video at an end point introduced by a video encoder.
1.3.6.1.4.1.9.9.769.1.4.1.1.4Unsigned32 (0..100)read-onlycurrent
cmqVideoCallHistoryRxNetworkDegradeAverage
OBJECT-TYPE
The percentage of quality loss (indicated by RX average MOS) due to network factors, such as jitter, delay and packet loss.
1.3.6.1.4.1.9.9.769.1.4.1.1.5Unsigned32 (0..100)read-onlycurrent
cmqVideoCallHistoryRxTransscodeDegradeAverage
OBJECT-TYPE
The percentage of quality loss (indicated by RX average MOS) due to the transcoding, including transrating, of a video stream.
1.3.6.1.4.1.9.9.769.1.4.1.1.6Unsigned32 (0..100)read-onlycurrent
ciscoMediaQualityMIBConform
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.769.2
ciscoMediaQualityMIBCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.769.2.1
ciscoMediaQualityMIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.769.2.2

Conformance

NameOIDStatus
ciscoMediaQualityMIBCompliance
MODULE-COMPLIANCE
The compliance statement for the SNMP entities that implement ciscoMediaQualityMIB module.
1.3.6.1.4.1.9.9.769.2.1.1current
cmqVoiceCallActiveGroup
OBJECT-GROUP
The collection of objects that provide voice quality statistics for active voice calls.
1.3.6.1.4.1.9.9.769.2.2.1current
cmqVoiceCallHistoryGroup
OBJECT-GROUP
The collection of objects that provide voice quality statistics for history voice calls.
1.3.6.1.4.1.9.9.769.2.2.2current
cmqVideoCallActiveGroup
OBJECT-GROUP
The collection of objects that provide video quality statistics for active video calls.
1.3.6.1.4.1.9.9.769.2.2.3current
cmqVideoCallHistoryGroup
OBJECT-GROUP
The collection of objects that provide video quality statistics for history video calls.
1.3.6.1.4.1.9.9.769.2.2.4current