CISCO-LWAPP-HA-MIB
- Registered at
- 1.3.6.1.4.1.9.9.843
- Last updated
- 2020-06-07 00:00
- Organization
- Cisco Systems Inc.
- Revisions
- 2020-06-07 00:00, 2019-07-08 00:00, 2017-11-08 00:00, 2017-03-14 00:00
- Namespace
- cisco
- Source file
CISCO-LWAPP-HA-MIB- Digest
sha256:7d85d1f4a2d148f2469fb27bd048491e0047714e7c6cc8af336f9bf7505b2016
Description
This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Access Point Protocol tunnel from Cisco Light-weight LWAPP Access Points. This MIB is used to show and configure High availability (HA) related statistics. The relationship between CC and the LWAPP APs can be depicted as follows: +......+ +......+ +......+ + + + + + + + CC + + CC + + CC + + + + + + + +......+ +......+ +......+ .. . . .. . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ + + + + + + + + + AP + + AP + + AP + + AP + + + + + + + + + +......+ +......+ +......+ +......+ . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ + + + + + + + + + MN + + MN + + MN + + MN + + + + + + + + + +......+ +......+ +......+ +......+ The LWAPP tunnel exists between the controller and the APs. The MNs communicate with the APs through the protocol defined by the 802.11 standard. LWAPP APs, upon bootup, discover and join one of the controllers and the controller pushes the configuration, that includes the WLAN parameters, to the LWAPP APs. The APs then encapsulate all the 802.11 frames from wireless clients inside LWAPP frames and forward the LWAPP frames to the controller. GLOSSARY Access Point ( AP ) An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides access to the distribution services via the wireless medium for associated clients. LWAPP APs encapsulate all the 802.11 frames in LWAPP frames and sends them to the controller to which it is logically connected. Central Controller ( CC ) The central entity that terminates the LWAPP protocol tunnel from the LWAPP APs. Throughout this MIB, this entity also referred to as 'controller'. Light Weight Access Point Protocol ( LWAPP ) This is a generic protocol that defines the communication between the Access Points and the Central Controller. Mobile Node ( MN ) A roaming 802.11 wireless device in a wireless network associated with an access point. Mobile Node, Mobile Station(Ms) and client are used interchangeably. REFERENCE [1] Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications. [2] Draft-obara-capwap-lwapp-00.txt, IETF Light Weight Access Point Protocol.
Contact
Cisco Systems, Customer Service Postal: 170 West Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS Email: cs-wnbu-snmp@cisco.com
Imports
| From | Symbols |
|---|---|
| CISCO-RF-MIB | cRFStatusPeerUnitState, cRFStatusUnitState |
| CISCO-SMI | ciscoMgmt |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-MIB | sysName |
| SNMPv2-SMI | Counter32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCO-LWAPP-HA-MIB CISCO-RF-MIB CISCO-SMI INET-ADDRESS-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ciscoLwappHaMIBNotifs OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.843.0 | |||
| ciscoLwappHaMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.843.1 | |||
| ciscoLwappHaGlobalConfig OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.843.1.1 | |||
| cLHaApSsoConfig OBJECT-TYPE This object specifies the value of redundancy mode statefull switch over (SSO). A value of 'true' indicates that, redundancy mode SSO is enabled. A value of 'false' indicates that, redundancy mode SSO is disabled. | 1.3.6.1.4.1.9.9.843.1.1.1 | TruthValue | read-write | current |
| cLHaPeerIpAddressType OBJECT-TYPE This object specifies the peer WLC IP address type. | 1.3.6.1.4.1.9.9.843.1.1.2 | InetAddressType | read-write | current |
| cLHaPeerIpAddress OBJECT-TYPE This object specifies the peer WLC IP address. | 1.3.6.1.4.1.9.9.843.1.1.3 | InetAddress | read-write | current |
| cLHaServicePortPeerIpAddressType OBJECT-TYPE This object specifies the peer WLC service port IP address type. | 1.3.6.1.4.1.9.9.843.1.1.4 | InetAddressType | read-write | current |
| cLHaServicePortPeerIpAddress OBJECT-TYPE This object specifies the peer WLC service port IP address. | 1.3.6.1.4.1.9.9.843.1.1.5 | InetAddress | read-write | current |
| cLHaServicePortPeerIpNetMaskType OBJECT-TYPE This object specifies the peer WLC service port net mask IP type. | 1.3.6.1.4.1.9.9.843.1.1.6 | InetAddressType | read-write | current |
| cLHaServicePortPeerIpNetMask OBJECT-TYPE This object specifies the peer WLC service port net mask IP address. | 1.3.6.1.4.1.9.9.843.1.1.7 | InetAddress | read-write | current |
| cLHaRedundancyIpAddressType OBJECT-TYPE This object represents the peer WLC redundancy management interface IP address type. | 1.3.6.1.4.1.9.9.843.1.1.8 | InetAddressType | read-only | current |
| cLHaRedundancyIpAddress OBJECT-TYPE This object represents the peer WLC redundancy management interface IP address. | 1.3.6.1.4.1.9.9.843.1.1.9 | InetAddress | read-only | current |
| cLHaPeerMacAddress OBJECT-TYPE This object represents the peer WLC mac address. | 1.3.6.1.4.1.9.9.843.1.1.10 | MacAddress | read-only | current |
| cLHaVirtualMacAddress OBJECT-TYPE This object specifies the peer WLC mobility MAC address. | 1.3.6.1.4.1.9.9.843.1.1.11 | MacAddress | read-write | current |
| cLHaPrimaryUnit OBJECT-TYPE This object specifies whether this is the primary or secondary unit. A value of 'true' indicates that, this unit is the primary unit. A value of 'false' indicates that, this unit is the secondary unit. | 1.3.6.1.4.1.9.9.843.1.1.12 | TruthValue | read-write | current |
| cLHaLinkEncryption OBJECT-TYPE This object specifies whether link encryption is enabled or disabled. A value of 'true' indicates that, link encryption is enabled. A value of 'false' indicates that, link encryption is disabled. | 1.3.6.1.4.1.9.9.843.1.1.13 | TruthValue | read-write | current |
| cLHaNetworkFailOver OBJECT-TYPE This object specifies whether network failover is enabled or disabled. A value of 'true' indicates that, network failover is enabled. A value of 'false' indicates that, network failover is disabled. | 1.3.6.1.4.1.9.9.843.1.1.14 | TruthValue | read-write | current |
| cLHaRFStatusUnitIp OBJECT-TYPE This object specifies the peer IP address when Redundancy Framwork(RF) state of active/peer unit changes. | 1.3.6.1.4.1.9.9.843.1.1.15 | InetAddress | read-only | current |
| cLHaKATimeout OBJECT-TYPE This object specifies keep alive timeout value in milli seconds between 100 and 1000. The value for this object configured in multiples of 50. | 1.3.6.1.4.1.9.9.843.1.1.16 | Unsigned32 | read-write | current |
| cLHaKARetryCount OBJECT-TYPE This object specifies keep alive retry count and The value for this object configured between 3 and 10. | 1.3.6.1.4.1.9.9.843.1.1.17 | Unsigned32 (3..10) | read-write | current |
| cLHaGwRetryCount OBJECT-TYPE This object specifies default gateway reachability retry count and The value for this object configured between 6 and 12. | 1.3.6.1.4.1.9.9.843.1.1.18 | Unsigned32 (6..12) | read-write | current |
| cLHaPeerSearchTimeout OBJECT-TYPE This object specifies peer search timeout and The value for this object configured between 60 and 300 seconds. | 1.3.6.1.4.1.9.9.843.1.1.19 | Unsigned32 (60..300) | read-write | current |
| cLHaRFStatusUnitIpType OBJECT-TYPE This object specifies the peer IP address type when redundancy framwork(RF) state of active/peer unit changes. | 1.3.6.1.4.1.9.9.843.1.1.20 | InetAddressType | read-only | current |
| ciscoLwappHaNetworkConfig OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.843.1.2 | |||
| cLHaNetworkRoutePeerConfigTable OBJECT-TYPE This table represents the peer network route entries. | 1.3.6.1.4.1.9.9.843.1.2.1 | not-accessible | current | |
| cLHaNetworkRoutePeerConfigEntry OBJECT-TYPE Each entry contains configuration of peer network route. | 1.3.6.1.4.1.9.9.843.1.2.1.1 | not-accessible | current | |
| cLHaNetworkRoutePeerIPAddressType OBJECT-TYPE This object represents peer network route IP address type. | 1.3.6.1.4.1.9.9.843.1.2.1.1.1 | InetAddressType | not-accessible | current |
| cLHaNetworkRoutePeerIPAddress OBJECT-TYPE This object represents peer network route IP address. | 1.3.6.1.4.1.9.9.843.1.2.1.1.2 | InetAddress | not-accessible | current |
| cLHaNetworkRoutePeerIPNetmaskType OBJECT-TYPE This object specifies peer network route IP netmask type. | 1.3.6.1.4.1.9.9.843.1.2.1.1.3 | InetAddressType | read-create | current |
| cLHaNetworkRoutePeerIPNetmask OBJECT-TYPE This object specifies peer network route IP netmask. | 1.3.6.1.4.1.9.9.843.1.2.1.1.4 | InetAddress | read-create | current |
| cLHaNetworkRoutePeerGatewayType OBJECT-TYPE This object represents peer network route gateway IP type. | 1.3.6.1.4.1.9.9.843.1.2.1.1.5 | InetAddressType | read-create | current |
| cLHaNetworkRoutePeerGateway OBJECT-TYPE This object specifies peer network route gateway IP address. | 1.3.6.1.4.1.9.9.843.1.2.1.1.6 | InetAddress | read-create | current |
| cLHaNetworkRoutePeerTransferStatus OBJECT-TYPE This object represents peer network route transfer status. A value of initiate(1) indicates that, network route transfer initiated. A value of inProgress(2) indicates that, network route transfer in progress. A value of success(3) indicates that, network route transfer success. A value of failure(4) indicates that, network route transfer failure. A value of timeout(5) indicates that network route transfer time out. | 1.3.6.1.4.1.9.9.843.1.2.1.1.7 | INTEGER {initiate(1), inProgress(2), success(3), failure(4), timeout(5)} | read-only | current |
| cLHaNetworkRoutePeerRowStatus OBJECT-TYPE This object specifies status column for this row and used to create and delete specific instances of rows in this table. | 1.3.6.1.4.1.9.9.843.1.2.1.1.8 | RowStatus | read-create | current |
| ciscoLwappHaNotificationVariable OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.843.1.3 | |||
| cLHaSecondaryControllerUsageTrapType OBJECT-TYPE This object represents the usage of secondary controller. After the usuage of 90 days, one trap is generated per day for over usage. A value of usageStart(1) indicates that, start of secondary controller usage. A value of usageComplete(2) indicates, that completion of secondary controller usage period of 90 days. A value of overUsage(3) indicates that, Secondary controller overusage. | 1.3.6.1.4.1.9.9.843.1.3.1 | INTEGER {usageStart(1), usageComplete(2), overUsage(3)} | read-only | current |
| cLHaSecondaryControllerUsageDayCounter OBJECT-TYPE This object represents the number of days the secondary controller is used. | 1.3.6.1.4.1.9.9.843.1.3.2 | Counter32 | read-only | current |
| cLHaBulkSyncCompleteEvent OBJECT-TYPE This object represents the time when the bulksync was complete. | 1.3.6.1.4.1.9.9.843.1.3.3 | INTEGER {bulkSyncComplete(1)} | read-only | current |
| cLHaPeerHotStandbyEvent OBJECT-TYPE This object represents that the peer has turned hot-standby. | 1.3.6.1.4.1.9.9.843.1.3.4 | INTEGER {haPeerHotstandby(1)} | read-only | current |
| ciscoLwappHaPeerStatisticsVariable OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.843.1.4 | |||
| ciscoLwappHaSystemStatistics OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.843.1.4.1 | |||
| ciscoLwappHaCpuStatistics OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.843.1.4.1.1 | |||
| cLHaAllCpuUsage OBJECT-TYPE This object represents the all CPUs usage of peer. | 1.3.6.1.4.1.9.9.843.1.4.1.1.1 | SnmpAdminString | read-only | current |
| ciscoLwappHaPowerSupplyStatistics OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.843.1.4.1.2 | |||
| cLHaPowerSupply1Present OBJECT-TYPE This object represents whether peer switch power Supply 1 is enabled or disabled. A value of 'true' indicates that, peer switch power supply 1 is enabled. A value of 'false' indicates that, peer switch power supply 1 is disabled. | 1.3.6.1.4.1.9.9.843.1.4.1.2.1 | TruthValue | read-only | current |
| cLHaPowerSupply1Operational OBJECT-TYPE This object represents whether peer switch power supply 1 operational or not. A value of 'true' indicates that, peer switch power supply 1 operational is enabled. A value of 'false' indicates that, peer switch power supply 1 operational is disabled. | 1.3.6.1.4.1.9.9.843.1.4.1.2.2 | TruthValue | read-only | current |
| cLHaPowerSupply2Present OBJECT-TYPE This object represents whether peer switch power supply 2 is enabled or disabled. A value of 'true' indicates that, peer switch power supply 2 is enabled. A value of 'false' indicates that, peer switch power supply 2 is disabled. | 1.3.6.1.4.1.9.9.843.1.4.1.2.3 | TruthValue | read-only | current |
| cLHaPowerSupply2Operational OBJECT-TYPE This object represents whether Peer switch power Supply 2 operational or not. A value of 'true' indicates that, peer switch power supply 2 operational is enabled. A value of 'false' indicates that, peer switch power supply 2 operational is disabled. | 1.3.6.1.4.1.9.9.843.1.4.1.2.4 | TruthValue | read-only | current |
| ciscoLwappHaMemoryStatistics OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.843.1.4.1.3 | |||
| cLHaTotalSystemMemory OBJECT-TYPE This object represents the total system memory in Kbytes. | 1.3.6.1.4.1.9.9.843.1.4.1.3.1 | Integer32 | read-only | current |
| cLHaFreeSystemMemory OBJECT-TYPE This object represents the free system memory in Kbytes. | 1.3.6.1.4.1.9.9.843.1.4.1.3.2 | Integer32 | read-only | current |
| cLHaUsedSystemMemory OBJECT-TYPE This object represents the used system memory in Kbytes. | 1.3.6.1.4.1.9.9.843.1.4.1.3.3 | Integer32 | read-only | current |
| cLHaAllocatedFromRtos OBJECT-TYPE This object represents the number of bytes allocated from RTOS in Kbytes. | 1.3.6.1.4.1.9.9.843.1.4.1.3.4 | Integer32 | read-only | current |
| cLHaChunksFree OBJECT-TYPE This object represents the number of free chunks. | 1.3.6.1.4.1.9.9.843.1.4.1.3.5 | Integer32 | read-only | current |
| cLHaMmappedRegions OBJECT-TYPE This object represents the number of memory mapped regions. | 1.3.6.1.4.1.9.9.843.1.4.1.3.6 | Integer32 | read-only | current |
| cLHaSpaceInMmappedRegions OBJECT-TYPE This object represents the space in the memory mapped regions in Kbytes. | 1.3.6.1.4.1.9.9.843.1.4.1.3.7 | Integer32 | read-only | current |
| cLHaTotalAllocatedSpace OBJECT-TYPE This object represents the total allocated space in Kbytes. | 1.3.6.1.4.1.9.9.843.1.4.1.3.8 | Integer32 | read-only | current |
| cLHaTotalNotInUseSpace OBJECT-TYPE This object represents the total space not in-use in Kbytes. | 1.3.6.1.4.1.9.9.843.1.4.1.3.9 | Integer32 | read-only | current |
| cLHaTopMostReleasableSpace OBJECT-TYPE This object represents the top most releasable space in Kbytes. | 1.3.6.1.4.1.9.9.843.1.4.1.3.10 | Integer32 | read-only | current |
| cLHaTotalAllocatedInclMmap OBJECT-TYPE This object represents the total memory allocated including memory map in Kbytes. | 1.3.6.1.4.1.9.9.843.1.4.1.3.11 | Integer32 | read-only | current |
| cLHaTotalUsedMmap OBJECT-TYPE This object represents the total memory in-use including memory map in Kbytes. | 1.3.6.1.4.1.9.9.843.1.4.1.3.12 | Integer32 | read-only | current |
| cLHaTotalFreeInclMmap OBJECT-TYPE This object represents the total free memory including memory map in Kbytes. | 1.3.6.1.4.1.9.9.843.1.4.1.3.13 | Integer32 | read-only | current |
| ciscoLwappHaStatisticsVariable OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.843.1.5 | |||
| cLHaAvgPeerReachLatency OBJECT-TYPE This object represents average value of peer controller reachable latency in micro seconds. | 1.3.6.1.4.1.9.9.843.1.5.1 | Integer32 | read-only | current |
| cLHaAvgGwReachLatency OBJECT-TYPE This object represents average value of default gate way reachable latency in micro seconds. | 1.3.6.1.4.1.9.9.843.1.5.2 | Integer32 | read-only | current |
| cLHaBulkSyncStatus OBJECT-TYPE This object represents current status of bulk sync. | 1.3.6.1.4.1.9.9.843.1.5.3 | SnmpAdminString | read-only | current |
| ciscoLwappMcHaConfig OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.843.1.6 | |||
| cLMcHaPortName OBJECT-TYPE This object allows user to specify and get the interface name designated as the HA Interface in Multi-Chassis HA environments. This will be applicable only on the virtual Chassis systems. This should be the complete namestring of the chassis interface. | 1.3.6.1.4.1.9.9.843.1.6.1 | DisplayString | read-write | current |
| cLMcHaPortLocIpAddrType OBJECT-TYPE This object represents the IP version to be used for HA transport. This object will apply to both local IP and the cLMcHaPortMask | 1.3.6.1.4.1.9.9.843.1.6.2 | InetAddressType | read-write | current |
| cLMcHaPortLocIp OBJECT-TYPE This object allows user to specify and get the Local chassis IPv4 Address to establish the HA communication. This IP Address will be assigned to the HA Port on the configuring chassis, and it will be take effect only after a reload. | 1.3.6.1.4.1.9.9.843.1.6.3 | InetAddress | read-write | current |
| cLMcHaPortMask OBJECT-TYPE This object allows user to specify and get the network mask for the local chassis IPv4 Address to establish the HA communication. This netmask will be assigned to designated HA interface. | 1.3.6.1.4.1.9.9.843.1.6.4 | InetAddress | read-write | current |
| cLMcHaPortRemoteIpAddrType OBJECT-TYPE This object represents the IP version to be used for HA transport. | 1.3.6.1.4.1.9.9.843.1.6.5 | InetAddressType | read-write | current |
| cLMcHaPortRemIp OBJECT-TYPE This object allows user to specify and get the peer chassis IPv4 Address to establish the HA communication. | 1.3.6.1.4.1.9.9.843.1.6.6 | InetAddress | read-write | current |
| cLMcHaKeepAliveTimeOut OBJECT-TYPE This object specifies keep alive timeout value in milli seconds between 100 and 1000. The value for this object configured in multiples of 100. | 1.3.6.1.4.1.9.9.843.1.6.7 | Unsigned32 (100..1000) | read-write | current |
| cLMcHaChassisPriority OBJECT-TYPE This object allows user to specify and get the current chassis priority. The higher the priority, higher the chance of local chassis becoming the Active. | 1.3.6.1.4.1.9.9.843.1.6.8 | Unsigned32 (1..2) | read-write | current |
| cLMcHaClearConfig OBJECT-TYPE This object allows user to remove the multi-chassis HA configuration. When get, TRUE value indicating HA configuration is cleared, FALSE means not. | 1.3.6.1.4.1.9.9.843.1.6.9 | TruthValue | read-write | current |
| cLMcHaKeepAliveRetryCount OBJECT-TYPE This object specifies keep alive retry count and The value for this object configured between 3 and 10. | 1.3.6.1.4.1.9.9.843.1.6.10 | Unsigned32 (3..10) | read-write | current |
| ciscoLwappMcRmiConfig OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.843.1.7 | |||
| cLMcRmiConfigAction OBJECT-TYPE This object allows user to remove the RMI configuration. When get, 1 value indicating RMI configuration is applied , 2 means clear config. | 1.3.6.1.4.1.9.9.843.1.7.1 | Unsigned32 (1..2) | read-write | current |
| cLMcRmiInterface OBJECT-TYPE This object specifies Chassis/Switch number and The value for this object is between 1 and 15. | 1.3.6.1.4.1.9.9.843.1.7.2 | SnmpAdminString | read-write | current |
| cLMcRmiChassisANum OBJECT-TYPE This object specifies Chassis/Switch number and The value for this object is between 1 and 15. | 1.3.6.1.4.1.9.9.843.1.7.3 | Unsigned32 (1..15) | read-write | current |
| cLMcRmiChassisAIpAddrType OBJECT-TYPE This object represents IP version to be used for RMI transport | 1.3.6.1.4.1.9.9.843.1.7.4 | InetAddressType | read-write | current |
| cLMcRmiChassisAIp OBJECT-TYPE This object allows user to specify and get the chassis. IPv4 Address to establish the RMI communication. This IP Address will be assigned to the RMI Port on the configuring chassis, and it will be take effect only after a reload. | 1.3.6.1.4.1.9.9.843.1.7.5 | InetAddress | read-write | current |
| cLMcRmiChassisBNum OBJECT-TYPE This object specifies Chassis/Switch number and The value for this object is between 1 and 15. | 1.3.6.1.4.1.9.9.843.1.7.6 | Unsigned32 (1..15) | read-write | current |
| cLMcRmiChassisBIpAddrType OBJECT-TYPE This object represents IP version to be used for RMI transport | 1.3.6.1.4.1.9.9.843.1.7.7 | InetAddressType | read-write | current |
| cLMcRmiChassisBIp OBJECT-TYPE This object allows user to specify and get the chassis. IPv4 Address to establish the RMI communication. This IP Address will be assigned to the RMI Port on the configuring chassis, and it will be take effect only after a reload. | 1.3.6.1.4.1.9.9.843.1.7.8 | InetAddress | read-write | current |
| cLMcRmiGatewayFailover OBJECT-TYPE This object allows user to enable/disable RMI Gateway-Failover configuration. When get, TRUE value indicating RMI Gateway-Failover configuration is enabled, FALSE means disabled. | 1.3.6.1.4.1.9.9.843.1.7.9 | TruthValue | read-write | current |
| cLMcRmiGatewayFailoverInterval OBJECT-TYPE This object specifies Gateway-Failover interval and The value for this object is between 6 and 12. | 1.3.6.1.4.1.9.9.843.1.7.10 | Unsigned32 (6..12) | read-write | current |
| ciscoLwappHaMIBConform OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.843.2 | |||
| ciscoLwappHaMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.843.2.1 | |||
| ciscoLwappHaMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.843.2.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| cLHaSecondaryControllerUsageTrap NOTIFICATION-TYPE This notification is sent on the event of a generic failure between the active and peer unit. | 1.3.6.1.4.1.9.9.843.0.1 | current |
| cLHaRFSwapInfoTrap NOTIFICATION-TYPE The notification is sent by the active redundant unit whenever its RF state changes or the RF state of the peer unit changes. To avoid a flurry of notifications for all state transitions, notifications will only be sent for transitions to the following RF states: disabled (for the peer state) standbyCold standbyHot active activeExtraload. | 1.3.6.1.4.1.9.9.843.0.2 | current |
| cLHaBulkSyncCompleteTrap NOTIFICATION-TYPE The notification is sent by the active redundant unit whenever the BulkSync to peer is complete. | 1.3.6.1.4.1.9.9.843.0.3 | current |
| cLHaPeerHotStandbyTrap NOTIFICATION-TYPE The notification is sent by the active redundant unit whenever its peer unit turned hot-standby. | 1.3.6.1.4.1.9.9.843.0.4 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| ciscoLwappHaMIBCompliance MODULE-COMPLIANCE This is a default module-compliance containing default object groups. | 1.3.6.1.4.1.9.9.843.2.1.1 | deprecated |
| ciscoLwappHaMIBComplianceRev1 MODULE-COMPLIANCE This is a default module-compliance containing default object groups. | 1.3.6.1.4.1.9.9.843.2.1.2 | current |
| ciscoLwappHaGlobalConfigGroup OBJECT-GROUP This collection of objects represents the information about global config of the high availability objects on the controller. | 1.3.6.1.4.1.9.9.843.2.2.1 | current |
| ciscoLwappHaNetworkConfigGroup OBJECT-GROUP This collection of objects represents the information about network config of the high availability objects on the controller. | 1.3.6.1.4.1.9.9.843.2.2.2 | current |
| ciscoLwappHaStatisticsGroup OBJECT-GROUP This collection of objects represents the information about the Statistics of high availability objects on the controller. | 1.3.6.1.4.1.9.9.843.2.2.3 | current |
| ciscoLwappHaMIBNotificationVariableGroup OBJECT-GROUP This collection of objects represents the information about the Notification of high availability objects on the controller. | 1.3.6.1.4.1.9.9.843.2.2.4 | current |
| ciscoLwappHaMIBNotificationGroup NOTIFICATION-GROUP This supplemental collection of objects represents the HA related notifications sent by the agent to a network management station. | 1.3.6.1.4.1.9.9.843.2.2.5 | current |
| ciscoLwappMcHaConfigGroup OBJECT-GROUP This collection of objects represents the information about network config of the multi chassis high availability RMI objects on the controller. | 1.3.6.1.4.1.9.9.843.2.2.6 | current |
| ciscoLwappMcRmiConfigGroup OBJECT-GROUP This collection of objects represents the information about network config of the multi chassis RMI objects on the controller. | 1.3.6.1.4.1.9.9.843.2.2.7 | current |