MIBs Depot

CISCO-LWAPP-DOT11-LDAP-MIB

Registered at
1.3.6.1.4.1.9.9.614
Last updated
2009-12-10 00:00
Organization
Cisco Systems Inc.
Revisions
2009-12-10 00:00, 2007-01-13 00:00
Namespace
cisco
Source file
CISCO-LWAPP-DOT11-LDAP-MIB
Digest
sha256:e84cebf3e21999ffee07389a0bda8f97148214f58ab94518263d307d9242e51e

Description

This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Access Point Protocol tunnel from Cisco Light-weight LWAPP Access Points. Information provided by this MIB is used to manage LDAP features on the controller. The relationship between CC and the LWAPP APs can be depicted as follows: +......+ +......+ +......+ + + + + + + + CC + + CC + + CC + + + + + + + +......+ +......+ +......+ .. . . .. . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ + + + + + + + + + AP + + AP + + AP + + AP + + + + + + + + + +......+ +......+ +......+ +......+ . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ + + + + + + + + + MN + + MN + + MN + + MN + + + + + + + + + +......+ +......+ +......+ +......+ The LWAPP tunnel exists between the controller and the APs. The MNs communicate with the APs through the protocol defined by the 802.11 standard. LWAPP APs, upon bootup, discover and join one of the controllers and the controller pushes the configuration, that includes the WLAN parameters, to the LWAPP APs. The APs then encapsulate all the 802.11 frames from wireless clients inside LWAPP frames and forward the LWAPP frames to the controller. GLOSSARY Access Point ( AP ) An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides access to the distribution services via the wireless medium for associated clients. LWAPP APs encapsulate all the 802.11 frames in LWAPP frames and sends them to the controller to which it is logically connected. Gratuitous Probe Response (GPR) The Gratuitous Probe Response feature aids in conserving battery power of WLAN-enabled cell phones by providing a high rate packet on the order of tens of milliseconds such that these kind of phones can wake up and wait at predefined intervals, to reduce battery power. The GPR packet is transmitted from the AP at a predefined time interval. Light Weight Access Point Protocol ( LWAPP ) This is a generic protocol that defines the communication between the Access Points and the Central Controller. Mobile Node ( MN ) A roaming 802.11 wireless device in a wireless network associated with an access point. Mobile Node and client are used interchangeably. Lightweight Directory Access Protocol ( LDAP ) LDAP is a protocol used for obtaining directory services and runs over TCP/IP. Transport Layer Security ( TLS ) This is a cryptographic protocol which provides secure communication over the network. REFERENCE [1] Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications [2] Draft-obara-capwap-lwapp-00.txt, IETF Light Weight Access Point Protocol

Contact

Cisco Systems, Customer Service Postal: 170 West Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS Email: cs-wnbu-snmp@cisco.com

Imports

FromSymbols
CISCO-LWAPP-WLAN-MIBcLWlanIndex
CISCO-SMIciscoMgmt
INET-ADDRESS-MIBInetAddress, InetAddressType, InetPortNumber
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIMODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, RowStatus, StorageType, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

CISCO-LWAPP-DOT11-LDAP-MIB
CISCO-LWAPP-WLAN-MIB
CISCO-SMI
CISCO-TC
INET-ADDRESS-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
CldlBindType
TEXTUAL-CONVENTION
This textual convention represents the kind of authentications done by the LDAP server. The semantics are as follows. anonymous(1) - This indicates that the LDAP server accepts anonymous authentication attempts. authenticated(2) - This indicates that the LDAP server authenticates based on the credentials provided in the form of username/password.
current

Objects

NameOIDSyntaxAccessStatus
ciscoLwappDot11LdapMIBNotifs
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.614.0
ciscoLwappDot11LdapMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.614.1
cldlConfig
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.614.1.1
cldlServerTable
OBJECT-TYPE
This table lists the information about LDAP servers configured on the controller. Entries are added or deleted by the user through the use of cldlServerRowStatus.
1.3.6.1.4.1.9.9.614.1.1.1not-accessiblecurrent
cldlServerEntry
OBJECT-TYPE
Each entry corresponds to a row in cldlServerTable and represents the information about an LDAP server the controller would contact for its operations.
1.3.6.1.4.1.9.9.614.1.1.1.1not-accessiblecurrent
cldlServerIndex
OBJECT-TYPE
This object uniquely identifies an entry in cldlServerTable.
1.3.6.1.4.1.9.9.614.1.1.1.1.1Unsigned32 (1..255)not-accessiblecurrent
cldlServerAddressType
OBJECT-TYPE
This object represents the type of the network address made available through cldlServerAddress.
1.3.6.1.4.1.9.9.614.1.1.1.1.2InetAddressTyperead-createcurrent
cldlServerAddress
OBJECT-TYPE
This object represents the address of the LDAP server that can be contacted by the controller for the purpose of authentication, authorization and accounting.
1.3.6.1.4.1.9.9.614.1.1.1.1.3InetAddressread-createcurrent
cldlServerPortNum
OBJECT-TYPE
This object represents the port number at which the controller contacts the LDAP server.
1.3.6.1.4.1.9.9.614.1.1.1.1.4InetPortNumberread-createcurrent
cldlServerState
OBJECT-TYPE
This object indicates whether the LDAP server is currently in use by the controller. A value of 'true' indicates that the LDAP server is in use. A value of 'false' indicates that the LDAP server is not in use.
1.3.6.1.4.1.9.9.614.1.1.1.1.5TruthValueread-createcurrent
cldlServerTimeout
OBJECT-TYPE
This object represents the retransmit time-out value for this LDAP server. If there is no response from the LDAP server, the controller will wait for this duration, before retransmitting.
1.3.6.1.4.1.9.9.614.1.1.1.1.6Unsigned32 (2..30)read-createcurrent
cldlServerUserBase
OBJECT-TYPE
This object represents the name of the sub-tree in the LDAP server that contains the information about all the users in that sub-tree.
1.3.6.1.4.1.9.9.614.1.1.1.1.7DisplayStringread-createcurrent
cldlServerUserNameAttribute
OBJECT-TYPE
This object represents the attribute that stores the name of the user.
1.3.6.1.4.1.9.9.614.1.1.1.1.8DisplayStringread-createcurrent
cldlServerUserName
OBJECT-TYPE
This object represents the name of the user. This is the value for the attribute identified by cldlServerUserNameAttribute.
1.3.6.1.4.1.9.9.614.1.1.1.1.9DisplayStringread-createcurrent
cldlServerSecurityEnable
OBJECT-TYPE
This object indicates whether the LDAP transactions are secured. A value of 'true' indicates that all the LDAP transactions of the controller are secured the use of TLS tunnel. A value of 'false' indicates that the LDAP transactions are not secured.
1.3.6.1.4.1.9.9.614.1.1.1.1.10TruthValueread-createcurrent
cldlServerStorageType
OBJECT-TYPE
This object represents the storage type for this conceptual row.
1.3.6.1.4.1.9.9.614.1.1.1.1.11StorageTyperead-createcurrent
cldlServerRowStatus
OBJECT-TYPE
This object represents the status column for a conceptual row in this table.
1.3.6.1.4.1.9.9.614.1.1.1.1.12RowStatusread-createcurrent
cldlServerBindType
OBJECT-TYPE
This object represents the kind of authentication the Controller does with the LDAP server.
1.3.6.1.4.1.9.9.614.1.1.1.1.13CldlBindTyperead-createcurrent
cldlServerAuthBindUserName
OBJECT-TYPE
This object represents the name used by the Controller for the authentication with the LDAP server. For values other than 'authenticated', as identified through cldlServerBindType, this object will be populated with an empty string.
1.3.6.1.4.1.9.9.614.1.1.1.1.14SnmpAdminStringread-createcurrent
cldlServerAuthBindPassword
OBJECT-TYPE
This object represents the password used by the Controller for authentication with the LDAP server. For security purposes, this object will be populated with the string '****', when a valid password has been configured. For values other than 'authenticated', as identified through cldlServerBindType, this object will be populated with an empty string.
1.3.6.1.4.1.9.9.614.1.1.1.1.15SnmpAdminStringread-createcurrent
cldlWlanLdapTable
OBJECT-TYPE
This table helps to map LDAP servers for WLANs from cldlServerTable through the use of cldlServerIndex. When a client gets associated to a WLAN, the controller uses those LDAP servers that are mapped to that WLAN for access to information about the clients. The creation of a new row in cLWlanConfigTable, through an explicit network management action, results in creation of an entry in this table. Similarly, deletion of a row in cLWlanConfigTable through user action causes the deletion of corresponding row in this table. This table has an one-to-one relationship with cLWlanConfigTable of CISCO-LWAPP-WLAN-MIB. There exists an entry in this table for each corresponding entry in the cLWlanConfigTable.
1.3.6.1.4.1.9.9.614.1.1.2not-accessiblecurrent
cldlWlanLdapEntry
OBJECT-TYPE
Each entry represents a conceptual row in cldlWlanLdapTable and represents the LDAP configuration for a particular WLAN identified by cLWlanIndex.
1.3.6.1.4.1.9.9.614.1.1.2.1not-accessiblecurrent
cldlWlanLdapPrimaryServerIndex
OBJECT-TYPE
The object represents the value that maps to the primary LDAP server for this WLAN. A value of 0 indicates that the primary LDAP server is not configured for this WLAN.
1.3.6.1.4.1.9.9.614.1.1.2.1.1Unsigned32 (0..255)read-writecurrent
cldlWlanLdapSecondaryServerIndex
OBJECT-TYPE
The object represents the value that maps to the secondary LDAP server for this WLAN. A value of 0 indicates that the primary LDAP server is not configured for this WLAN.
1.3.6.1.4.1.9.9.614.1.1.2.1.2Unsigned32 (0..255)read-writecurrent
cldlWlanLdapTertiaryServerIndex
OBJECT-TYPE
The object represents the value that maps to the tertiary LDAP server for this WLAN. A value of 0 indicates that the primary LDAP server is not configured for this WLAN.
1.3.6.1.4.1.9.9.614.1.1.2.1.3Unsigned32 (0..255)read-writecurrent
cldlStatus
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.614.1.2
ciscoLwappDot11LdapMIBConform
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.614.2
ciscoLwappDot11LdapMIBCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.614.2.1
ciscoLwappDot11LdapMIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.614.2.2

Conformance

NameOIDStatus
ciscoLwappDot11LdapMIBCompliance
MODULE-COMPLIANCE
The compliance statement for the SNMP entities that implement the ciscoLwappDot11LdapMIB module.
1.3.6.1.4.1.9.9.614.2.1.1deprecated
ciscoLwappDot11LdapMIBComplianceRev1
MODULE-COMPLIANCE
The compliance statement for the SNMP entities that implement the ciscoLwappDot11LdapMIB module.
1.3.6.1.4.1.9.9.614.2.1.2current
ciscoLwappDot11LdapMIBConfigGroup
OBJECT-GROUP
This collection of objects specifies the LDAP configuration on the controller.
1.3.6.1.4.1.9.9.614.2.2.1current
ciscoLwappDot11LdapMIBConfigGroupSup1
OBJECT-GROUP
This group of objects supplements the ciscoLwappDot11LdapMIBConfigGroup, to configure the information about the Controller's authentication done with the LDAP server.
1.3.6.1.4.1.9.9.614.2.2.2current