MIBs Depot

CISCO-LWAPP-DOT11-CLIENT-CCX-REPORTS-MIB

Registered at
1.3.6.1.4.1.9.9.767
Last updated
2010-12-13 00:00
Organization
Cisco Systems Inc.
Revisions
2010-12-13 00:00
Namespace
cisco
Source file
CISCO-LWAPP-DOT11-CLIENT-CCX-REPORTS-MIB
Digest
sha256:ad47a0636a85b9b4d5b49dff7a85aee37a19085e3465f5253d560948544070a2

Description

This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Access Point Protocol tunnel from Cisco Light-weight LWAPP Access Points. The relationship between CC and the LWAPP APs can be depicted as follows: +......+ +......+ +......+ +......+ + + + + + + + + + CC + + CC + + CC + + CC + + + + + + + + + +......+ +......+ +......+ +......+ .. . . . .. . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + AP + + AP + + AP + + AP + + AP + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ . . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + MN + + MN + + MN + + MN + + MN + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ The LWAPP tunnel exists between the controller and the APs. The MNs communicate with the APs through the protocol defined by the 802.11 standard. LWAPP APs, upon bootup, discover and join one of the controllers and the controller pushes the configuration, that includes the WLAN parameters, to the LWAPP APs. The APs then encapsulate all the 802.11 frames from wireless clients inside LWAPP frames and forward the LWAPP frames to the controller. GLOSSARY Access Point ( AP ) An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides access to the distribution services via the wireless medium for associated clients. LWAPP APs encapsulate all the 802.11 frames in LWAPP frames and sends them to the controller to which it is logically connected. Central Controller ( CC ) The central entity that terminates the LWAPP protocol tunnel from the LWAPP APs. Throughout this MIB, this entity also referred to as 'controller'. Cisco Compatible eXtensions (CCX) Wireless LAN Access Points (APs) manufactured by Cisco Systems have features and capabilities beyond those in related standards (e.g., IEEE 802.11 suite of standards, Wi-Fi recommendations by WECA, 802.1X security suite, etc). A number of features provide higher performance. For example, Cisco AP transmits a specific Information Element, which the clients adapt to for enhanced performance. Similarly, a number of features are implemented by means of proprietary Information Elements, which Cisco clients use in specific ways to carry out tasks above and beyond the standard. Other examples of feature categories are roaming and power saving. Light Weight Access Point Protocol ( LWAPP ) This is a generic protocol that defines the communication between the Access Points and the Central Controller. Mobile Node ( MN ) A roaming 802.11 wireless device in a wireless network associated with an access point. The terms 'Mobile node' and 'client' are used interchangeably. Radio Management (RM) This term refers to managing the 802.11 radio environment to provide the best quality service to to the 802.11 wireless clients. Service Set Identifier ( SSID ) SSID is a unique identifier that APs and clients use to identify with each other. SSID is a simple means of access control and is not for security. The SSID can be any alphanumeric entry up to 32 characters. REFERENCE [1] Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications [2] Draft-obara-capwap-lwapp-00.txt, IETF Light Weight Access Point Protocol

Contact

Cisco Systems, Customer Service Postal: 170 West Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS Email: cs-wnbu-snmp@cisco.com

Imports

FromSymbols
CISCO-LWAPP-DOT11-CLIENT-MIBcldcClientMacAddress
CISCO-SMIciscoMgmt
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIMODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BRIDGE-MIB
CISCO-LWAPP-AP-MIB
CISCO-LWAPP-DOT11-CLIENT-CCX-REPORTS-MIB
CISCO-LWAPP-DOT11-CLIENT-MIB
CISCO-LWAPP-DOT11-MIB
CISCO-LWAPP-MOBILITY-EXT-MIB
CISCO-LWAPP-RF-MIB
CISCO-LWAPP-TC-MIB
CISCO-LWAPP-WLAN-MIB
CISCO-LWAPP-WLAN-POLICY-MIB
CISCO-QOS-PIB-MIB
CISCO-SMI
CISCO-TC
ENTITY-MIB
IANA-ENTITY-MIB
IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
P-BRIDGE-MIB
Q-BRIDGE-MIB
RFC1158-MIB
RFC1271-MIB
RMON-MIB
RMON2-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
TOKEN-RING-RMON-MIB
UUID-TC-MIB

Textual conventions

NameOIDSyntaxAccessStatus
CiscoLwappCcxRmReqStatus
TEXTUAL-CONVENTION
This attribute is used to initiate/track a request to the ccxv4 client.
current

Objects

NameOIDSyntaxAccessStatus
ciscoLwapDot11ClientRmMIBNotifs
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.767.0
ciscoLwappDot11ClientRmMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.767.1
cldccrRmReq
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.767.1.1
cldccrRmReqTable
OBJECT-TYPE
This table is used to configure the radio measurement request parameters to be sent to the ccxv4 clients.
1.3.6.1.4.1.9.9.767.1.1.1not-accessiblecurrent
cldccrRmReqEntry
OBJECT-TYPE
Each entry represents a conceptual row in this table. An entry corresponds to a client for which a certain type of report is being fetched.
1.3.6.1.4.1.9.9.767.1.1.1.1not-accessiblecurrent
cldccrRmReqReportType
OBJECT-TYPE
This object is set to list of radio measurement requests the reports of which will be sent by the ccxv4 client to the controller.
1.3.6.1.4.1.9.9.767.1.1.1.1.1Bits {channelLoadReport(0), histogramReport(1), beaconReport(2), frameReport(3)}read-createcurrent
cldccrRmInitiateReq
OBJECT-TYPE
This object is used to send the rm req message to the client.
1.3.6.1.4.1.9.9.767.1.1.1.1.2TruthValueread-createcurrent
cldccrRmReqNumIterations
OBJECT-TYPE
This attribute is used to set the number of times the rm request will be sent to the client.
1.3.6.1.4.1.9.9.767.1.1.1.1.3INTEGER (0..250)read-createcurrent
cldccrRmReqMeasDuration
OBJECT-TYPE
The time interval between two RM Reqs in seconds.
1.3.6.1.4.1.9.9.767.1.1.1.1.4Unsigned32 (5..32400)read-createcurrent
cldccrRmReqRowStatus
OBJECT-TYPE
This is the status column for this row and is used to create and delete specific instances of rows in this table.
1.3.6.1.4.1.9.9.767.1.1.1.1.5RowStatusread-createcurrent
cldccrRmResp
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.767.1.2
cldccrRmHistRepTable
OBJECT-TYPE
This table contains the noise histogram reports of the clients which were queried for the same.
1.3.6.1.4.1.9.9.767.1.2.1not-accessiblecurrent
cldccrRmHistRepEntry
OBJECT-TYPE
There is an entry in the table where entry is identified by the client Mac address.
1.3.6.1.4.1.9.9.767.1.2.1.1not-accessiblecurrent
cldccrRmHistIndex
OBJECT-TYPE
Index which will be the channel number in most cases.
1.3.6.1.4.1.9.9.767.1.2.1.1.1Unsigned32 (0..28)not-accessiblecurrent
cldccrRmHistRepChannelNumber
OBJECT-TYPE
Channel number indicates the channel number to which the noise histogram Report applies.
1.3.6.1.4.1.9.9.767.1.2.1.1.2Unsigned32read-onlycurrent
cldccrRmHistRepTimeStamp
OBJECT-TYPE
Timestamp of the histogram report.
1.3.6.1.4.1.9.9.767.1.2.1.1.3OCTET STRINGread-onlycurrent
cldccrRmHistRepRPIDensity0
OBJECT-TYPE
This Field stores the RPI density in power range power << -87 db.
1.3.6.1.4.1.9.9.767.1.2.1.1.4Unsigned32read-onlycurrent
cldccrRmHistRepRPIDensity1
OBJECT-TYPE
This Field stores the RPI density in power range -87 < power << -82.
1.3.6.1.4.1.9.9.767.1.2.1.1.5Unsigned32read-onlycurrent
cldccrRmHistRepRPIDensity2
OBJECT-TYPE
This Field stores the RPI density in power range -82 < power << -77.
1.3.6.1.4.1.9.9.767.1.2.1.1.6Unsigned32read-onlycurrent
cldccrRmHistRepRPIDensity3
OBJECT-TYPE
This Field stores the RPI density in power range -77 < power << -72.
1.3.6.1.4.1.9.9.767.1.2.1.1.7Unsigned32read-onlycurrent
cldccrRmHistRepRPIDensity4
OBJECT-TYPE
This Field stores the RPI density in power range -72< Power << -67.
1.3.6.1.4.1.9.9.767.1.2.1.1.8Unsigned32read-onlycurrent
cldccrRmHistRepRPIDensity5
OBJECT-TYPE
This Field stores the RPI density in power range -67< Power << -62.
1.3.6.1.4.1.9.9.767.1.2.1.1.9Unsigned32read-onlycurrent
cldccrRmHistRepRPIDensity6
OBJECT-TYPE
This Field stores the RPI density in power range -62< Power<< -57.
1.3.6.1.4.1.9.9.767.1.2.1.1.10Unsigned32read-onlycurrent
cldccrRmHistRepRPIDensity7
OBJECT-TYPE
This Field stores the RPI density in power range -57< Power<< -52.
1.3.6.1.4.1.9.9.767.1.2.1.1.11Unsigned32read-onlycurrent
cldccrRmBeaconRepTable
OBJECT-TYPE
This table contains the beacon reports of the clients which were queried for the same.
1.3.6.1.4.1.9.9.767.1.2.2not-accessiblecurrent
cldccrRmBeaconRepEntry
OBJECT-TYPE
There is an entry in the table where entry is identified by the client Mac address.
1.3.6.1.4.1.9.9.767.1.2.2.1not-accessiblecurrent
cldccrRmBeaconIndex
OBJECT-TYPE
Index which will be the channel number in most cases.
1.3.6.1.4.1.9.9.767.1.2.2.1.1Unsigned32 (0..28)not-accessiblecurrent
cldccrRmBeaconRptChannelNumber
OBJECT-TYPE
Channel number indicates the channel number to which the noise beacon report applies.
1.3.6.1.4.1.9.9.767.1.2.2.1.2Unsigned32read-onlycurrent
cldccrRmBeaconRptTimeStamp
OBJECT-TYPE
Timestamp of the beacon report.
1.3.6.1.4.1.9.9.767.1.2.2.1.3OCTET STRINGread-onlycurrent
cldccrRmBeaconRptPhyType
OBJECT-TYPE
Phy type indicates the physical medium used.
1.3.6.1.4.1.9.9.767.1.2.2.1.4INTEGER {fh(1), dss(2), unused(3), ofdm(4), highDataRateDss(5), erp(6)}read-onlycurrent
cldccrRmBeaconRptReceivedPower
OBJECT-TYPE
This field indicates the received strength of the beacon or probe response frame in dBm.
1.3.6.1.4.1.9.9.767.1.2.2.1.5Unsigned32 (0..250)read-onlycurrent
cldccrRmBeaconRptBSSID
OBJECT-TYPE
This field contains the 6-byte BSSID of the STA that transmitted the beacon or probe response frame.
1.3.6.1.4.1.9.9.767.1.2.2.1.6MacAddressread-onlycurrent
cldccrRmBeaconRptParentTsf
OBJECT-TYPE
This field is used to store the parent TSF Parent TSF contains the lower 4 bytes of the serving APs. TSF value at the time the measuring STA received the beacon or probe response frame.
1.3.6.1.4.1.9.9.767.1.2.2.1.7OCTET STRING (SIZE(64))read-onlycurrent
cldccrRmBeaconRptTargetTsf
OBJECT-TYPE
This field is used to store the Target TSF. Target TSF contains the 8-byte TSF value contained in the beacon or probe response received by the measuring STA.
1.3.6.1.4.1.9.9.767.1.2.2.1.8OCTET STRING (SIZE(64))read-onlycurrent
cldccrRmBeaconRptInterval
OBJECT-TYPE
This field is equal to the 2-byte Beacon Interval field in the received beacon or probe response.
1.3.6.1.4.1.9.9.767.1.2.2.1.9Unsigned32read-onlycurrent
cldccrRmBeaconRptCapInfo
OBJECT-TYPE
This attribute represents the capability info.
1.3.6.1.4.1.9.9.767.1.2.2.1.10Unsigned32read-onlycurrent
cldccRmChannelLoadReportTable
OBJECT-TYPE
This table contains the channel load reports of the clients which were queried for the same.
1.3.6.1.4.1.9.9.767.1.2.3not-accessiblecurrent
cldccRmChannelLoadReportEntry
OBJECT-TYPE
There is an entry in the table where entry is identified by the client Mac address.
1.3.6.1.4.1.9.9.767.1.2.3.1not-accessiblecurrent
cldccRmChannelLoadReportIndex
OBJECT-TYPE
This indicates the index of the report table.
1.3.6.1.4.1.9.9.767.1.2.3.1.1Unsigned32not-accessiblecurrent
cldccRmChannelLoadReportChannelNumber
OBJECT-TYPE
Channel Number indicates the channel number to which the Channel Load Report applies.
1.3.6.1.4.1.9.9.767.1.2.3.1.2Unsigned32read-onlycurrent
cldccRmChannelLoadReportTimeStamp
OBJECT-TYPE
Timestamp of the channel load report.
1.3.6.1.4.1.9.9.767.1.2.3.1.3OCTET STRINGread-onlycurrent
cldccRmChannelLoadReportCCABusyFraction
OBJECT-TYPE
CCA Busy Fraction shall contain the fractional duration over which CCA indicated the channel was busy during the measurement duration.
1.3.6.1.4.1.9.9.767.1.2.3.1.4Unsigned32read-onlycurrent
cldccRmFrameReportTable
OBJECT-TYPE
This table contains the frame reports of the clients which were queried for the same.
1.3.6.1.4.1.9.9.767.1.2.4not-accessiblecurrent
cldccRmFrameReportEntry
OBJECT-TYPE
There is an entry in the table where entry is identified by the client Mac address.
1.3.6.1.4.1.9.9.767.1.2.4.1not-accessiblecurrent
cldccRmFrameReportElemIndex
OBJECT-TYPE
This attribute represents the index of element index of frame report.
1.3.6.1.4.1.9.9.767.1.2.4.1.1Unsigned32not-accessiblecurrent
cldccRmFrameReportSubElemIndex
OBJECT-TYPE
This attribute represents the index of the sub element in a frame report.
1.3.6.1.4.1.9.9.767.1.2.4.1.2Unsigned32not-accessiblecurrent
cldccRmFrameReportChanNumber
OBJECT-TYPE
This attribute represents the channel number of frame report.
1.3.6.1.4.1.9.9.767.1.2.4.1.3Unsigned32read-onlycurrent
cldccRmFrameReportTimeStamp
OBJECT-TYPE
Timestamp of the frame report.
1.3.6.1.4.1.9.9.767.1.2.4.1.4OCTET STRINGread-onlycurrent
cldccRmFrameReportTransmitAddr
OBJECT-TYPE
This represents the transmitted address.
1.3.6.1.4.1.9.9.767.1.2.4.1.5MacAddressread-onlycurrent
cldccRmFrameReportBssid
OBJECT-TYPE
This represents the bssid.
1.3.6.1.4.1.9.9.767.1.2.4.1.6MacAddressread-onlycurrent
cldccRmFrameReportRecvSigPower
OBJECT-TYPE
This field indicates the received strength of the beacon or probe response frame in dBm.
1.3.6.1.4.1.9.9.767.1.2.4.1.7Unsigned32 (0..250)read-onlycurrent
cldccRmFrameReportFrameCount
OBJECT-TYPE
This field indicates the received strength of the beacon or probe response frame in dBm.
1.3.6.1.4.1.9.9.767.1.2.4.1.8Unsigned32 (0..250)read-onlycurrent
cldccrRmReqStatus
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.767.1.3
cldccrRmReqStatusTable
OBJECT-TYPE
This table is used to get the status for each of the reports.
1.3.6.1.4.1.9.9.767.1.3.1not-accessiblecurrent
cldccrRmReqStatusEntry
OBJECT-TYPE
There is an entry in the table where entry is identified by the client Mac address.
1.3.6.1.4.1.9.9.767.1.3.1.1not-accessiblecurrent
cldccrRmFrameReqStatus
OBJECT-TYPE
This attribute is used to initiate/track a frame report request to the ccxv4 client.
1.3.6.1.4.1.9.9.767.1.3.1.1.1CiscoLwappCcxRmReqStatusread-onlycurrent
cldccrRmHistogramReqStatus
OBJECT-TYPE
This attribute is used to initiate/track a noise histogram request to the ccxv4 client.
1.3.6.1.4.1.9.9.767.1.3.1.1.2CiscoLwappCcxRmReqStatusread-onlycurrent
cldccrRmBeaconReqStatus
OBJECT-TYPE
This attribute is used to initiate/track a beacon request to the ccxv4 client.
1.3.6.1.4.1.9.9.767.1.3.1.1.3CiscoLwappCcxRmReqStatusread-onlycurrent
cldccrRmChanLoadReqStatus
OBJECT-TYPE
This attribute is used to initiate/track a channel load request to the ccxv4 client.
1.3.6.1.4.1.9.9.767.1.3.1.1.4CiscoLwappCcxRmReqStatusread-onlycurrent
ciscoLwappDot11ClientRmMIBConform
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.767.2
ciscoLwappDot11ClientRmMIBCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.767.2.1
ciscoLwappDot11ClientRmMIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.767.2.2

Conformance

NameOIDStatus
ciscoLwappDot11ClientRmMibCompliance
MODULE-COMPLIANCE
The compliance statement for the SNMP entities that implement the ciscoLwappDot11ClientRmMIB module.
1.3.6.1.4.1.9.9.767.2.1.1current
ciscoLwappDot11ClientRmConfigGroup
OBJECT-GROUP
This collection of objects represent the reports of the CCX Clients.
1.3.6.1.4.1.9.9.767.2.2.1current