MIBs Depot

CISCO-LWAPP-CLOUD-SERVICES-MIB

Registered at
1.3.6.1.4.1.9.9.838
Last updated
2018-07-03 00:00
Organization
Cisco Systems Inc.
Revisions
2018-07-03 00:00, 2018-04-24 00:00, 2017-12-21 00:00, 2017-02-22 00:00
Namespace
cisco
Source file
CISCO-LWAPP-CLOUD-SERVICES-MIB
Digest
sha256:5cbd3c3fbb960017ab661475f26277c93f1cd43a953c9ada6da80f8b03ca7545

Description

This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Access Point Protocol tunnel from Cisco Light-weight LWAPP Access Points. This MIB provides configuration of Network Assurance (NA) ,Connected Mobility Experience (CMX) and Data Externalization(dx) which comes under Cloud services. Network Assurance (NA) Its a cloud based Assurance which provided by Cisco to monitor the health of the network by collecting data from controllers and Sensors. Connected Mobility Experience (CMX) The MIB is used for programming Cloud based CMX services. The Network Mobility Service Protocol(NMSP) data is exported to CMX Cloud Server through https connection. The NMSP encoding will remain as it is for the TCP/TLS connection. Use the MIB for configuring URL and Token ID and to enable this serrvice. The Controller will act as https client and will establish https connection with CMX URL. Controller will verify the CMX cloud server while the cloud server will authenticate the Controller using the configured id-token. Data Externalization(dx) dx is a feature in wlc which allows it to collect the data which may get published to the NA server for analaytics. The relationship between CC, NA server and the LWAPP APs can be depicted as follows: +......+ +......+ +......+ + + + + + + + CC + + CC +.....+ NA + + + + + + + +......+ +......+ +......+ .. . . . .. . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +..........+ + + + + + + + + + AP + + AP + + AP +......+ SENSOR + + + + + + + + AP + +......+ +......+ +......+ +..........+ . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ + + + + + + + + + MN + + MN + + MN + + MN + + + + + + + + + +......+ +......+ +......+ +......+ The LWAPP tunnel exists between the controller and the APs. The MNs communicate with the APs through the protocol defined by the 802.11 standard. LWAPP APs, upon bootup, discover and join one of the controllers and the controller pushes the configuration, that includes the WLAN parameters, to the LWAPP APs. The APs then encapsulate all the 802.11 frames from wireless clients inside LWAPP frames and forward the LWAPP frames to the controller. GLOSSARY Access Point ( AP ) An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides access to the distribution services via the wireless medium for associated clients. LWAPP APs encapsulate all the 802.11 frames in LWAPP frames and sends them to the controller to which it is logically connected. Light Weight Access Point Protocol ( LWAPP ) This is a generic protocol that defines the communication between the Access Points and the Central Controller. Mobile Node ( MN ) A roaming 802.11 wireless device in a wireless network associated with an access point. Mobile Node and client are used interchangeably. Sensors These are wireless clients which periodically connect to a wireless network, run some tests and report back the test status to Cisco Network Assurance Server. The sensors are controlled and instructed by the Network Assurance server. APs can be tentatively put in Sensor mode to do the Sensor Job. There can be dedicated sensors as well. Filtered Channels ( FC ) These are user-defined channels which use the filters configured by the user to choose and carry the required data.

Contact

Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553 -NETS E-mail: cs-snmp@cisco.com

Imports

FromSymbols
CISCO-SMIciscoMgmt
INET-ADDRESS-MIBInetAddress, InetAddressType, InetPortNumber
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIMODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

CISCO-LWAPP-CLOUD-SERVICES-MIB
CISCO-SMI
INET-ADDRESS-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
clCSMIBNotifs
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.838.0
clCSNANotifs
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.838.0.0
clCSSecTunNotifs
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.838.0.1
clCSMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.838.1
clCSNAObjects
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.838.1.1
clCSNAServerConfig
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.838.1.1.1
clCSNAServerUrl
OBJECT-TYPE
This object specifies the URL for network assurance server.
1.3.6.1.4.1.9.9.838.1.1.1.1SnmpAdminStringread-writecurrent
clCSNAServerIdToken
OBJECT-TYPE
This object specifies the token id for network assurance server.
1.3.6.1.4.1.9.9.838.1.1.1.2SnmpAdminStringread-writecurrent
clCSNAServerOnchangeEnable
OBJECT-TYPE
This object specifies the type of telemetry data that will be externalized from the controller. The type can be bulk or onChange. With onChange enabled, NA server will receive only the change in data. With onChange disabled, NA server will receive the entire dataset(bulk) A value of 'true' indicates that onchange is enabled. A value of 'false' indicates that onChange is disabled. clCSNAServerOnchangeEnable object is superseded by clCSNAServerChannelOnChangeMode.
1.3.6.1.4.1.9.9.838.1.1.1.3TruthValueread-writedeprecated
clCSNAServerSyncInterval
OBJECT-TYPE
This object specifies the frequency at which the telemetry data would be received at the NA server. fixed - The controller will provide the telemetry data once in every 5 minutes adaptive - The controller will provide the telemetry data once in every 30 seconds clCSNAServerSyncInterval object is superseded by clCSNAServerChannelSyncInterval.
1.3.6.1.4.1.9.9.838.1.1.1.4INTEGER {fixed(1), adaptive(2)}read-writedeprecated
clCSNAServerSubscriptionAction
OBJECT-TYPE
This object specifies the possible modifications to the data content in the telemetry stream sent to the NA server. add - will add the specified channel to the telemetry data stream remove - will remove the specified channel from the telemetry data stream clCSNAServerSubscriptionAction object is superseded by clCSNAServerChannelRowStatus.
1.3.6.1.4.1.9.9.838.1.1.1.5INTEGER {add(1), remove(2)}read-writedeprecated
clCSNAServerSubscriptionTopic
OBJECT-TYPE
This object specifies the channels that can be modified in the telemetry data stream that is sent to the NA server. The user can configure a channel from the given enums system(0) - Configures the system channel network(1) - Configures the network channel client(2) - Configures the client channel ap(3) - Configures the AP channel rogue(4) - Configures the rogue channel interferer(5) - Configures the interferer channel apEvent(6) - Configures the ap-event channel clientEvent(7) - Configures the client-event channel scanReport(8) - Configures the scan-report channel clientDnsReport(9) - Configures the client-dns-report channel fra(10) - Configures the fra channel mapserver(11) - Configures the mapserver channel clCSNAServerSubscriptionTopic object is superseded by clCSNAServerChannelName .
1.3.6.1.4.1.9.9.838.1.1.1.6Bits {system(0), network(1), client(2), ap(3), rogue(4), interferer(5), apEvent(6), clientEvent(7), scanReport(8), clientDnsReport(9), fra(10), mapserver(11)}read-writedeprecated
cLCSNAServerResetSubscriptions
OBJECT-TYPE
This object specfies the option to reset NA server channel subscriptions to defaults. A value of 'true' indicates that subscriptions are reset. A value of 'false' indicates that subscriptions are not reset. User can only set the value 'true'. Read on this object always returns the value 'false'.
1.3.6.1.4.1.9.9.838.1.1.1.7TruthValueread-writecurrent
clCSNAGlobalConfig
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.838.1.1.2
clCSNAEnable
OBJECT-TYPE
This object specifies whether network assurance is enabled or disabled. A value of 'true' indicates that enables network assurance. A value of 'false' indicates that disables network assurance.
1.3.6.1.4.1.9.9.838.1.1.2.1TruthValueread-writecurrent
clCSNASensorBackhaulSSID
OBJECT-TYPE
This object specifies the SSID for network assurance sensor backhaul.
1.3.6.1.4.1.9.9.838.1.1.2.2SnmpAdminStringread-writecurrent
clCSNASensorBackhaulAuthType
OBJECT-TYPE
This object specifies about authentication type of network assurance sensor backhaul. dot1x(1): This value represents the authentication type as dot1x. psk(2): This value represents the authentication type as psk. open(3): This value represents the authentication type as open.
1.3.6.1.4.1.9.9.838.1.1.2.3INTEGER {dot1x(1), psk(2), open(3)}read-writecurrent
clCSNASensorBackhaulEapType
OBJECT-TYPE
This object specifies about Extensible Authentication Protocol (EAP) type of network assurance sensor backhaul. eapfast(1): This value represents the EAP type as eapfast. peap(2): This value represents the EAP type as peap. none(3): This value represents the EAP type as none.
1.3.6.1.4.1.9.9.838.1.1.2.4INTEGER {eapfast(1), peap(2), none(3)}read-writecurrent
clCSNASensorBackhaulUsername
OBJECT-TYPE
This object specifies about the username for dot1x type authentication type of cloud services sensor backhaul.
1.3.6.1.4.1.9.9.838.1.1.2.5SnmpAdminStringread-writecurrent
clCSNASensorBackhaulPassword
OBJECT-TYPE
This object specifies about the password for dot1x authentication type of network assurance sensor backhaul.
1.3.6.1.4.1.9.9.838.1.1.2.6SnmpAdminStringread-writecurrent
clCSNASensorBackhaulPskMode
OBJECT-TYPE
This object specifies about the psk mode for psk authentication type of network assurance for sensor backhaul. ascii(1): This value represents psk mode as ascii. hex(2):This value represents psk mode as hex.
1.3.6.1.4.1.9.9.838.1.1.2.7INTEGER {ascii(1), hex(2)}read-writecurrent
clCSNASensorBackhaulPsk
OBJECT-TYPE
This object specifies about the psk value for psk authentication type of network assurance for sensor backhaul.
1.3.6.1.4.1.9.9.838.1.1.2.8SnmpAdminStringread-writecurrent
clCSNAASIEnable
OBJECT-TYPE
This object specifies whether Network Assurance Adaptive Sync Interval (ASI) mode is enabled or disabled. A value of 'true' indicates that Network Assurance ASI mode is enabled. A value of 'false' indicates that network assurance ASI mode is disabled.
1.3.6.1.4.1.9.9.838.1.1.2.9TruthValueread-writedeprecated
clCSNADiffSyncEnable
OBJECT-TYPE
This object specifies whether Network Assurance diff sync is enabled or disabled. In diff sync mode only modified parameters are externalized from the controller. A value of 'true' indicates that network assurance diff sync mode is enabled. A value of 'false' indicates that network assurance diff sync mode is disabled.
1.3.6.1.4.1.9.9.838.1.1.2.10TruthValueread-writedeprecated
clCSNATrapMgmtObjects
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.838.1.1.3
clCSNASensorLradMacAddr
OBJECT-TYPE
This object represents the AP mac adress of the sensor.
1.3.6.1.4.1.9.9.838.1.1.3.1MacAddressaccessible-for-notifycurrent
clCSNASensorStatus
OBJECT-TYPE
This object specifies Sensor reachablity to NA Server. wsaNoUpdate(1): This value indicated that NA server status as no update. wsaStatusOk(2): This value indicated that NA server status as Reachable. wsaServerUrlNotReachable(3): This value indicated that NA server status as Url not reachable. wsaServerwrongIdToken(4): This value indicated that NA server status as Wrong Id token configured. wsaServerProxyNotReachable(5): This value indicated that NA server status as Proxy server not reachable. wsaSensorIntf24Error(6): This value indicated that NA server status as Sensor backhaul error. wsaSensorIntf24ProxyError(7): This value indicated that NA server status as Sensor backhaul error. wsaSensorIntf50Error(8): This value indicated that NA server status as Sensor backhaul error. wsaSensorIntf50ProxyError(9): This value indicated that NA server status as Sensor backhaul error. wsaApLicenseDenied(10): This value indicated that NA server status as License denied. wsaNAServerUnreachable(11): This value indicated that NA server status as Cloud server not reachable. wsaAttemptAssocToRoot(12): This value indicated that NA server status as attempeting the assocation. wsaAssocToRoot(13): This value indicated that NA server status as Associated to Root. wsaTestCfgRcvd(14): This value indicated that NA server status as Test coverage Recieved. wsaStatusmax(15): This value indicated that NA server status as Status maximum.
1.3.6.1.4.1.9.9.838.1.1.3.2INTEGER {wsaNoUpdate(1), wsaStatusOk(2), wsaServerUrlNotReachable(3), wsaServerwrongIdToken(4), wsaServerProxyNotReachable(5), wsaSensorIntf24Error(6), wsaSensorIntf24ProxyError(7), wsaSensorIntf50Error(8), wsaSensorIntf50ProxyError(9), wsaApLicenseDenied(10), wsaNAServerUnreachable(11), wsaAttemptAssocToRoot(12), wsaAssocToRoot(13), wsaTestCfgRcvd(14), wsaStatusmax(15)}accessible-for-notifycurrent
clCSNASensorErrCode
OBJECT-TYPE
This object represents Sensor conectivity status. wsaSensorBackhaulWronSsid(1): This value indicated that NA server status as Invalid ssid. wsaSensorBackhaulInvalidCredential(2): This value indicated that NA server status as Invalid credentials. wsaSensorConnError(3): This value indicated that NA server status as Sensor connection error. wsaNAServerNotFound(4): This value indicated that NA server status as Server not found-404 wsaNAServerInternalError(5):This value indicated that NA server status as Sensor connection error.
1.3.6.1.4.1.9.9.838.1.1.3.3INTEGER {wsaSensorBackhaulWronSsid(1), wsaSensorBackhaulInvalidCredential(2), wsaSensorConnError(3), wsaNAServerNotFound(4), wsaNAServerInternalError(5)}accessible-for-notifycurrent
clCSNAServerConfigTable
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.838.1.1.4
cLCSNAServerChannelTable
OBJECT-TYPE
This table represents NA server subscription channel related configurations.
1.3.6.1.4.1.9.9.838.1.1.4.1not-accessiblecurrent
cLCSNAServerChannelEntry
OBJECT-TYPE
Each entry in this table represents and includes the attributes needed for subscribing a NA server channel
1.3.6.1.4.1.9.9.838.1.1.4.1.1not-accessiblecurrent
clCSNAServerChannelName
OBJECT-TYPE
This object specifies the NA server channel name to subscribe/unsubscribe/set sync interval/set on-change mode based on the value of respective objects. 'ap': This value indicates aps channel. 'ap-fra': This value indicates ap-fra channel. 'ap-capwap': This value indicates ap-capwap channel. 'ap-channel': This value indicates ap-channel channel. 'ap-fra-sensor': This value indicates ap-fra-sensor channel. 'ap-interface-stats': This value indicates ap-interface-stats channel. 'ap-inventory': This value indicates ap-inventory channel. 'ap-network-stats': This value indicates ap-network-stats channel. 'ap-reports': This value indicates ap-reports channel. 'ap-rf': This value indicates ap-rf channel. 'ap-rf-neighbors': This value indicates ap-rf-neighbors channel. 'ap-rf-stats': This value indicates ap-rf-stats channel. 'ap-events': This value indicates ap-events channel. 'ap-system': This value indicates ap-system channel. 'cdp': This value indicates cdp channel. 'client-app-stats': This value indicates client-app-stats channel. 'client-mobility-stats': This value indicates client-mobility-stats channel. 'client-network-stats': This value indicates client-network-stats channel. 'client-policies': This value indicates client-policies channel. 'client-reports': This value indicates client-reports channel. 'client-rf-measurements': This value indicates client-rf-measurements channel. 'client-traffic-measurements': This value indicates client-traffic-measurements channel. 'client-wireless-stats': This value indicates client-wireless-stats channel. 'client-dns-reports': This value indicates client-dns-reports channel. 'client-events': This value indicates client-events channel. 'client': This value indicates clients channel. 'dhcp': This value indicates dhcp channel. 'eogre': This value indicates eogre channel. 'fabric': This value indicates fabric channel. 'interferers': This value indicates interferers channel. 'licensing': This value indicates licensing channel. 'mobility': This value indicates mobility channel. 'ndp': This value indicates ndp channel. 'radius-events': This value indicates radius-events channel. 'radius': This value indicates radius channel. 'redundancy-events': This value indicates redundancy-events channel. 'redundancy': This value indicates redundancy channel. 'rogues': This value indicates rogues channel. 'scan-reports': This value indicates scan-reports channel. 'system-core-stats': This value indicates system-core-stats channel. 'system-dataplane-stats': This value indicates system-dataplane-stats channel. 'system-general-stats': This value indicates system-general-stats channel. 'system-port-stats': This value indicates system-port-stats channel. 'system-process-stats': This value indicates system-process-stats channel. 'tacacs': This value indicates tacacs channel. <filter channel name> : User can also specify filter channel name to subscribe
1.3.6.1.4.1.9.9.838.1.1.4.1.1.1SnmpAdminStringnot-accessiblecurrent
clCSNAServerChannelSyncInterval
OBJECT-TYPE
This object specifies the NA server channel sync interval. fifteen(15): This value indicates 15 sec interval thirty(30): This value indicates 30 sec interval sixty(60): This value indicates 60 sec interval threehundred(300): This value indicates 300 sec interval. This object can't be used to set interval for filter-channels.
1.3.6.1.4.1.9.9.838.1.1.4.1.1.2INTEGER {fifteen(15), thirty(30), sixty(60), threehundred(300)}read-createcurrent
clCSNAServerChannelOnChangeMode
OBJECT-TYPE
This object specifies the value of on-change mode of a NA server channel. Only the changed data is synced if it's enabled. A value of 'true' indicates that only changed data will be synced. A value of 'false' indicates that all the data present in DB will be synced. This object can't be used to set on-change mode for filter-channels.
1.3.6.1.4.1.9.9.838.1.1.4.1.1.3TruthValueread-createcurrent
clCSNAServerIsFilterChannel
OBJECT-TYPE
This object represents whether the given channel is filter channel or static channel. A value of 'true' indicates that the channel is filter channel A value of 'false' indicates that the channel is static channel
1.3.6.1.4.1.9.9.838.1.1.4.1.1.4TruthValueread-onlycurrent
clCSNAServerChannelRowStatus
OBJECT-TYPE
This is the status column for this row and is used to create and delete specific instances of rows in this table.
1.3.6.1.4.1.9.9.838.1.1.4.1.1.5RowStatusread-createcurrent
clCSDXObjects
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.838.1.2
clCSDxConfig
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.838.1.2.1
clCSDxMode
OBJECT-TYPE
This object specifies whether data externalization is enabled or disabled. A value of 'true' indicates that enables DX. A value of 'false' indicates that disables DX. It requires reboot after enable
1.3.6.1.4.1.9.9.838.1.2.1.1TruthValueread-writecurrent
clCSCMXObjects
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.838.1.3
clCSCMXServerConfig
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.838.1.3.1
clCSCMXServerUrl
OBJECT-TYPE
This object specifies the URL for cloud services server.
1.3.6.1.4.1.9.9.838.1.3.1.1SnmpAdminStringread-writecurrent
clCSCMXServerIdToken
OBJECT-TYPE
This object specifies the token id for cloud services server.
1.3.6.1.4.1.9.9.838.1.3.1.2SnmpAdminStringread-writecurrent
clCSCMXConfig
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.838.1.3.2
clCSCMXEnable
OBJECT-TYPE
This object specifies whether cloud services for CMX is enabled or disabled. A value of 'true' indicates that cloud services enables for CMX. A value of 'false' indicates that cloud services disables for CMX.
1.3.6.1.4.1.9.9.838.1.3.2.1TruthValueread-writecurrent
clCSCMXOnPremisesEnable
OBJECT-TYPE
This object specifies whether NMSP service for on-premises CMX is enabled or disabled. A value of 'true' indicates that NMSP service is enabled for on-premises CMX. A value of 'false' indicates that NMSP service is disabled for on-premises CMX.
1.3.6.1.4.1.9.9.838.1.3.2.2TruthValueread-writecurrent
clCSSecTunObjects
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.838.1.4
clCSSecTunConfig
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.838.1.4.1
clCSSecTunEnable
OBJECT-TYPE
This object specifies the status of secure tunnel mode on the controller. A value of 'true' indicates that, secure tunnel is enabled. A value of 'false' indicates that, secure tunnel is disabled.
1.3.6.1.4.1.9.9.838.1.4.1.1TruthValueread-writecurrent
clCSSecTunTlsGwFqdn
OBJECT-TYPE
This object specifies the Fully Qualified Domain Name(FQDN) of the TLS Gateway with which secure tunnel is established.
1.3.6.1.4.1.9.9.838.1.4.1.2SnmpAdminStringread-writecurrent
clCSSecTunTlsGwIpAddrType
OBJECT-TYPE
This object specifies the TLS Gateway IP address type.
1.3.6.1.4.1.9.9.838.1.4.1.3InetAddressTyperead-writecurrent
clCSSecTunTlsGwIpAddr
OBJECT-TYPE
This object specifies the IP address of the TLS Gateway with which secure tunnel is established.
1.3.6.1.4.1.9.9.838.1.4.1.4InetAddressread-writecurrent
clCSSecTunTlsGwPort
OBJECT-TYPE
This object specifies the TLS Gateway port number.
1.3.6.1.4.1.9.9.838.1.4.1.5InetPortNumberread-writecurrent
clCSSecTunPskId
OBJECT-TYPE
This object specifies the PSK Id for the given WLC. Id along with clCSSecTunPskKey are used as part of secure tunnel setup with TLS gateway.
1.3.6.1.4.1.9.9.838.1.4.1.6SnmpAdminStringread-writecurrent
clCSSecTunPskKey
OBJECT-TYPE
This object specifies the key of the PSK cipher, which is used while setting up the secure tunnel with TLS gateway
1.3.6.1.4.1.9.9.838.1.4.1.7SnmpAdminStringread-writecurrent
clCSSecTunRadiusEnable
OBJECT-TYPE
This object specifies the secure tunneling status of RADIUS traffic like Authentication and Accounting servers. A value of 'true' indicates that, RADIUS traffic on secure tunnel is enabled. A value of 'false' indicates that, RADIUS traffic on secure tunnel is disabled.
1.3.6.1.4.1.9.9.838.1.4.1.8TruthValueread-writecurrent
clCSSecTunSnmpTrapEnable
OBJECT-TYPE
This object specifies the secure tunneling trap is enabled or disabled. A value of 'true' indicates that secure tunnel status trap is enabled. A value of 'false' indicates that secure tunnel status trap is disabled.
1.3.6.1.4.1.9.9.838.1.4.1.9TruthValueread-writecurrent
cLCSSecTunStaticNetworkTable
OBJECT-TYPE
This table represents static Networks configured for Secure tunneling of it's traffic. This is the explicit way of configuration to send traffic of a given network over TLS secure tunnel
1.3.6.1.4.1.9.9.838.1.4.1.10not-accessiblecurrent
cLCSSecTunStaticNetworkEntry
OBJECT-TYPE
Each entry in this table represents the attributes of secure tunnel network.
1.3.6.1.4.1.9.9.838.1.4.1.10.1not-accessiblecurrent
cLSCSecTunNetworkIPAddressType
OBJECT-TYPE
This object specifies the IP address type of cLSCSecTunNetworkIPAddress.
1.3.6.1.4.1.9.9.838.1.4.1.10.1.1InetAddressTypenot-accessiblecurrent
cLSCSecTunNetworkIPAddress
OBJECT-TYPE
This object specifies the IP address or subnet of the network to be added for secure tunneling
1.3.6.1.4.1.9.9.838.1.4.1.10.1.2InetAddressnot-accessiblecurrent
cLSCSecTunNetworkIPNetmaskType
OBJECT-TYPE
This object specifies IP netmask type of cLSCSecTunNetworkIPNetmask.
1.3.6.1.4.1.9.9.838.1.4.1.10.1.3InetAddressTypenot-accessiblecurrent
cLSCSecTunNetworkIPNetmask
OBJECT-TYPE
This object specifies the IP netmask of the network added for secure tunneling.
1.3.6.1.4.1.9.9.838.1.4.1.10.1.4InetAddressnot-accessiblecurrent
cLSCSecTunNetworkRowStatus
OBJECT-TYPE
This object specifies status column for this row and used to create and delete specific instances of rows in this table.
1.3.6.1.4.1.9.9.838.1.4.1.10.1.5RowStatusread-createcurrent
clCSSecTunInfo
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.838.1.4.2
clCSSecTunCurrentState
OBJECT-TYPE
This object represents the current state of the secure tunnel. secureTunnelDown(1): This value indicates that secure tunnel is down. secureTunnelUp(2): This values indicates that secure tunnel is up.
1.3.6.1.4.1.9.9.838.1.4.2.1INTEGER {secureTunnelDown(1), secureTunnelUp(2)}read-onlycurrent
clCSSecTunTlsGwIpAddrInUseType
OBJECT-TYPE
This objects represents the TLS Gateway IP address type
1.3.6.1.4.1.9.9.838.1.4.2.2InetAddressTyperead-onlycurrent
clCSSecTunTlsGwIpInUseAddr
OBJECT-TYPE
This object represents the IP address of the TLS Gateway which is currently in-use. User can configure FQDN or IP address for TLS Gateway. The preference is to resolve the FQDN and get the IP address, if that fails it will use the statically configured IP address.
1.3.6.1.4.1.9.9.838.1.4.2.3InetAddressread-onlycurrent
clCSSecTunInnerIpAddrType
OBJECT-TYPE
This objects represents the IP address type of the TLS client.
1.3.6.1.4.1.9.9.838.1.4.2.4InetAddressTyperead-onlycurrent
clCSSecTunInnerIpAddr
OBJECT-TYPE
This object represents the inner IP address of the TLS client on the controller. This IP is issued by TLS gateway as part of the secure tunnel setup and informed to TLS client as config update.
1.3.6.1.4.1.9.9.838.1.4.2.5InetAddressread-onlycurrent
clCSSecTunTLSClientProcState
OBJECT-TYPE
This object represents the state of the TLS Client process. TLS Client process is responsible in establishing TLS tunnel with the Gateway. It encapsulates the data packets before sending them to the Gateway over the tunnel. tlscProcDown(1): This value indicates that the process is down, tlscProcInProg(2): This value indicates that the process is just coming up and is in-progress. tlscProcUp(3): This value indicates that the process is up and running. tlscProcReStart(4): This value indicates that the process is in restart.
1.3.6.1.4.1.9.9.838.1.4.2.6INTEGER {tlscProcDown(1), tlscProcInProg(2), tlscProcUp(3), tlscProcReStart(4)}read-onlycurrent
cLCSSecTunRouteTable
OBJECT-TYPE
This table represents the routes for various devices and networks currently managed by the secure tunnel module for tunneling of the management traffic. Plumbing and deletion of the routes to linux occurs based on the tunnel state changes.
1.3.6.1.4.1.9.9.838.1.4.2.7not-accessiblecurrent
cLCSSecTunRouteEntry
OBJECT-TYPE
Each entry in this table represents attributes needed for adding a route for secure tunneling
1.3.6.1.4.1.9.9.838.1.4.2.7.1not-accessiblecurrent
cLSCSecTunRouteIPAddressType
OBJECT-TYPE
This object represents the IP address type of cLSCSecTunRouteIPAddress.
1.3.6.1.4.1.9.9.838.1.4.2.7.1.1InetAddressTypenot-accessiblecurrent
cLSCSecTunRouteIPAddress
OBJECT-TYPE
This object represents the IP address or subnet of the route to be added for secure tunneling
1.3.6.1.4.1.9.9.838.1.4.2.7.1.2InetAddressnot-accessiblecurrent
cLSCSecTunRouteNetmaskType
OBJECT-TYPE
This object represents IP netmask type of cLSCSecTunNetworkIPNetmask.
1.3.6.1.4.1.9.9.838.1.4.2.7.1.3InetAddressTypenot-accessiblecurrent
cLSCSecTunRouteNetmask
OBJECT-TYPE
This object represents the IP netmask of the route to be added for secure tunneling.
1.3.6.1.4.1.9.9.838.1.4.2.7.1.4InetAddressnot-accessiblecurrent
cLSCSecTunRouteTableRowStatus
OBJECT-TYPE
This object specifies the entry status of this conceptual row.
1.3.6.1.4.1.9.9.838.1.4.2.7.1.5Unsigned32read-onlycurrent
clCSWebhookGlobalObjects
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.838.1.5
clCSWebhookUrl
OBJECT-TYPE
This object specifies the URL for the webhook server
1.3.6.1.4.1.9.9.838.1.5.1SnmpAdminStringread-writecurrent
clCSWebhookAuthToken
OBJECT-TYPE
This object specifies the authentication token of the webhook server.
1.3.6.1.4.1.9.9.838.1.5.2SnmpAdminStringread-writecurrent
clCSWebhookEnable
OBJECT-TYPE
This object specifies the state of the controller telemetry data externalization to the webhook server. A value of 'true' indicates that externalization to the webhook server is enabled. A value of 'false' indicates that externalization to the webhook server is disabled
1.3.6.1.4.1.9.9.838.1.5.3TruthValueread-writecurrent
clCSWebhookOnchangeEnable
OBJECT-TYPE
This object specifies the type of telemetry data that will be externalized. The type can be bulk or onChange. With onChange enabled, the server will receive only the change in data. With onChange disabled, the server will receive the entire dataset(bulk) A value of 'true' indicates that onchange is enabled. A value of 'false' indicates that onChange is disabled. clCSWebhookOnchangeEnable object is superseded by clCSWebhookChannelOnChangeMode.
1.3.6.1.4.1.9.9.838.1.5.4TruthValueread-writedeprecated
clCSWebhookSyncInterval
OBJECT-TYPE
This object specifies the frequency at which the telemetry data would be received at the webhook server. A value of fixed will provide data once in every 5 minutes A value of adaptive will provide data once in 30 seconds clCSWebhookSyncInterval object is superseded by clCSWebhookChannelSyncInterval .
1.3.6.1.4.1.9.9.838.1.5.5INTEGER {fixed(1), adaptive(2)}read-writedeprecated
clCSWebhookSubscriptionAction
OBJECT-TYPE
This object specifies the possible modifications to the data content in the telemetry stream sent to the webhook server. add - will add the channel to the telemetry stream remove - will remove the channel from the telemetry stream clCSWebhookSubscriptionAction object is superseded by clCSWebhookChannelRowStatus.
1.3.6.1.4.1.9.9.838.1.5.6INTEGER {add(1), remove(2)}read-writedeprecated
clCSWebhookSubscriptionTopic
OBJECT-TYPE
This object specifies the channels that can be modified in the telemetry data stream that is sent to the webhook server. The user can configure a channel from the given enums system(0) - Configures the system channel network(1) - Configures the network channel client(2) - Configures the client channel ap(3) - Configures the AP channel rogue(4) - Configures the rogue channel interferer(5) - Configures the interferer channel mapserver(6) - Configures the mapserver channel clCSWebhookSubscriptionTopic object is superseded by clCSWebhookChannelName.
1.3.6.1.4.1.9.9.838.1.5.7Bits {system(0), network(1), client(2), ap(3), rogue(4), interferer(5), mapserver(6)}read-writedeprecated
cLCSWebhookResetSubscriptions
OBJECT-TYPE
This object specfies the option to reset webhook channel subscriptions to defaults. A value of 'true' indicates that subscriptions are reset. A value of 'false' indicates that subscriptions are not reset. User can only set the value 'true'. Read on this object always returns the value 'false'.
1.3.6.1.4.1.9.9.838.1.5.8TruthValueread-writecurrent
clCSWebhookTableObjects
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.838.1.6
cLCSWebhookChannelTable
OBJECT-TYPE
This table represents Webhook subscription channel related configurations.
1.3.6.1.4.1.9.9.838.1.6.1not-accessiblecurrent
cLCSWebhookChannelEntry
OBJECT-TYPE
Each entry in this table represents and includes the attributes needed for subscribing a webhook channel
1.3.6.1.4.1.9.9.838.1.6.1.1not-accessiblecurrent
clCSWebhookChannelName
OBJECT-TYPE
This object specifies the webhook channel name to subscribe/unsubscribe/set sync interval/set on-change mode based on the value of respective objects. 'ap': This value indicates aps channel. 'ap-fra': This value indicates ap-fra channel. 'ap-capwap': This value indicates ap-capwap channel. 'ap-channel': This value indicates ap-channel channel. 'ap-fra-sensor': This value indicates ap-fra-sensor channel. 'ap-interface-stats': This value indicates ap-interface-stats channel. 'ap-inventory': This value indicates ap-inventory channel. 'ap-network-stats': This value indicates ap-network-stats channel. 'ap-reports': This value indicates ap-reports channel. 'ap-rf': This value indicates ap-rf channel. 'ap-rf-neighbors': This value indicates ap-rf-neighbors channel. 'ap-rf-stats': This value indicates ap-rf-stats channel. 'ap-events': This value indicates ap-events channel. 'ap-system': This value indicates ap-system channel. 'cdp': This value indicates cdp channel. 'client-app-stats': This value indicates client-app-stats channel. 'client-mobility-stats': This value indicates client-mobility-stats channel. 'client-network-stats': This value indicates client-network-stats channel. 'client-policies': This value indicates client-policies channel. 'client-reports': This value indicates client-reports channel. 'client-rf-measurements': This value indicates client-rf-measurements channel. 'client-traffic-measurements': This value indicates client-traffic-measurements channel. 'client-wireless-stats': This value indicates client-wireless-stats channel. 'client-dns-reports': This value indicates client-dns-reports channel. 'client-events': This value indicates client-events channel. 'client': This value indicates clients channel. 'dhcp': This value indicates dhcp channel. 'eogre': This value indicates eogre channel. 'fabric': This value indicates fabric channel. 'interferers': This value indicates interferers channel. 'licensing': This value indicates licensing channel. 'mobility': This value indicates mobility channel. 'ndp': This value indicates ndp channel. 'radius-events': This value indicates radius-events channel. 'radius': This value indicates radius channel. 'redundancy-events': This value indicates redundancy-events channel. 'redundancy': This value indicates redundancy channel. 'rogues': This value indicates rogues channel. 'system-core-stats': This value indicates system-core-stats channel. 'system-dataplane-stats': This value indicates system-dataplane-stats channel. 'system-general-stats': This value indicates system-general-stats channel. 'system-port-stats': This value indicates system-port-stats channel. 'system-process-stats': This value indicates system-process-stats channel. 'tacacs': This value indicates tacacs channel.
1.3.6.1.4.1.9.9.838.1.6.1.1.1SnmpAdminStringnot-accessiblecurrent
clCSWebhookChannelSyncInterval
OBJECT-TYPE
This object specifies the webhook channel sync interval. fifteen(15): This value indicates 15 sec interval thirty(30): This value indicates 30 sec interval sixty(60): This value indicates 60 sec interval threehundred(300): This value indicates 300 sec interval.
1.3.6.1.4.1.9.9.838.1.6.1.1.2INTEGER {fifteen(15), thirty(30), sixty(60), threehundred(300)}read-createcurrent
clCSWebhookChannelOnChangeMode
OBJECT-TYPE
This object specifies the value of on-change mode of a webhook server channel. A value of 'true' indicates that only changed data will be synced. A value of 'false' indicates that all the data present in DB will be synced.
1.3.6.1.4.1.9.9.838.1.6.1.1.3TruthValueread-createcurrent
clCSWebhookChannelRowStatus
OBJECT-TYPE
This is the status column for this row and is used to create and delete specific instances of rows in this table.
1.3.6.1.4.1.9.9.838.1.6.1.1.4RowStatusread-createcurrent
clCSFilterChanTableObjects
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.838.1.7
cLCSTelemetryFCTable
OBJECT-TYPE
This table represents telemetry filter channel related configurations. Filter channel is a user created channel which uses filters added by user to externalize the data.
1.3.6.1.4.1.9.9.838.1.7.1not-accessiblecurrent
cLCSTelemetryFCEntry
OBJECT-TYPE
Each entry in this table represents the attributes needed for managing a filter channel.
1.3.6.1.4.1.9.9.838.1.7.1.1not-accessiblecurrent
clCSTelemetryFCName
OBJECT-TYPE
This object specifies the name of filter channel.
1.3.6.1.4.1.9.9.838.1.7.1.1.1SnmpAdminStringnot-accessiblecurrent
clCSTelemetryFCParent
OBJECT-TYPE
This object specifies the name of parent channel to which the filter channel belongs. Parent channel should be a static channel.
1.3.6.1.4.1.9.9.838.1.7.1.1.2SnmpAdminStringread-createcurrent
clCSTelemetryFCSubStatus
OBJECT-TYPE
This object represents whether the filter channel is subscribed or not. none(1): This value indicates that filter channel is not subscribed. assurance(2): This value indicates that filter channel is subscribed to assurance. webhook(3): This value indicates that filter channel is subscribed to webhook.
1.3.6.1.4.1.9.9.838.1.7.1.1.3INTEGER {none(1), assurance(2), webhook(3)}read-onlycurrent
clCSTelemetryFCFilterCount
OBJECT-TYPE
This object represents the number of filters configured on this filter channel.
1.3.6.1.4.1.9.9.838.1.7.1.1.4Unsigned32read-onlycurrent
clCSTelemetryFCRowStatus
OBJECT-TYPE
This is the status column for this row and is used to create and delete specific instances of rows in this table.
1.3.6.1.4.1.9.9.838.1.7.1.1.5RowStatusread-createcurrent
cLCSTelemetryFCFilterTable
OBJECT-TYPE
This table represents all the filters configured on the filter channels.
1.3.6.1.4.1.9.9.838.1.7.2not-accessiblecurrent
cLCSTelemetryFCFilterEntry
OBJECT-TYPE
Each entry in this table represents the attributes needed for managing the filters of a perticular filter channel
1.3.6.1.4.1.9.9.838.1.7.2.1not-accessiblecurrent
clCSTelemetryFCFilter
OBJECT-TYPE
This object specifies the filters of a given filter channel. Filter channel extracts the data from parent channel based on the provided filters.
1.3.6.1.4.1.9.9.838.1.7.2.1.1SnmpAdminStringnot-accessiblecurrent
clCSTelemetryFCFilterRowStatus
OBJECT-TYPE
This is the status column for this row and is used to create and delete specific instances of rows in this table.
1.3.6.1.4.1.9.9.838.1.7.2.1.2RowStatusread-createcurrent
clCSMIBConform
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.838.2
clCSMIBCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.838.2.1
clCSMIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.838.2.2

Notifications

NameOIDStatus
clCSNASensorNotReachableDevStatus
NOTIFICATION-TYPE
This object is used to send a trap whenever the device status moves out of compliance with respect to smart-licensing
1.3.6.1.4.1.9.9.838.0.0.1current
clCSSecTunStateChange
NOTIFICATION-TYPE
This object is used to send secure tunnel status change.
1.3.6.1.4.1.9.9.838.0.1.1current

Conformance

NameOIDStatus
clCSMIBCompliance
MODULE-COMPLIANCE
The compliance statement for the SNMP entities that implement this MIB.
1.3.6.1.4.1.9.9.838.2.1.1deprecated
clCSMIBComplianceRev1
MODULE-COMPLIANCE
The compliance statement for the SNMP entities that implement this MIB.
1.3.6.1.4.1.9.9.838.2.1.2deprecated
clCSMIBComplianceRev2
MODULE-COMPLIANCE
The compliance statement for the SNMP entities that implement this MIB.
1.3.6.1.4.1.9.9.838.2.1.3deprecated
clCSMIBComplianceRev3
MODULE-COMPLIANCE
The compliance statement for the SNMP entities that implement this MIB.
1.3.6.1.4.1.9.9.838.2.1.4current
clCSNAServerConfigGroup
OBJECT-GROUP
This collection of objects represent the configuration of server on the controller to be passed to an LWAPP AP.
1.3.6.1.4.1.9.9.838.2.2.1current
clCSNAGlobalConfigGroup
OBJECT-GROUP
This collection of objects represent the configuration of Network Assuranceon the controller to be passed to an LWAPP AP.
1.3.6.1.4.1.9.9.838.2.2.2deprecated
clCSCMXServerConfigGroup
OBJECT-GROUP
This collection of objects represent the configuration of Connected Mobility Experience (CMX) server on the controller to be passed to an LWAPP AP.
1.3.6.1.4.1.9.9.838.2.2.3current
clCSCMXConfigGroup
OBJECT-GROUP
This collection of objects represent the configuration for Connected Mobility Experience (CMX) on the controller to be passed to an LWAPP AP. clCSCMXConfigGroup object is superseded by clCSCMXConfigGroupRev1.
1.3.6.1.4.1.9.9.838.2.2.4deprecated
clCSDxConfigGroup
OBJECT-GROUP
This collection of objects represent the configuration for data externalization(dx) on the controller to be passed to an LWAPP AP.
1.3.6.1.4.1.9.9.838.2.2.5current
clCSNATrapGroup
OBJECT-GROUP
This collection of objects represent the trap configuration of NA sent by the agent to a network management station.
1.3.6.1.4.1.9.9.838.2.2.6current
clCSNASensorTrapGroup
NOTIFICATION-GROUP
This supplemental collection of objects represents the NA related notifications sent by the agent to a network management station.
1.3.6.1.4.1.9.9.838.2.2.7current
clCSSecTunConfigGroup
OBJECT-GROUP
This collection of objects represent the secure Tunnel configuration.
1.3.6.1.4.1.9.9.838.2.2.8current
clCSSecTunInfoGroup
OBJECT-GROUP
This collection of objects represent the secure Tunnel information.
1.3.6.1.4.1.9.9.838.2.2.9current
clCSSecTunNotifsGroup
NOTIFICATION-GROUP
This supplemental collection of objects represents the Secure Tunnel related notifications sent by the agent to a network management station.
1.3.6.1.4.1.9.9.838.2.2.10current
clCSNAGlobalConfigGroupRev1
OBJECT-GROUP
This collection of objects represent the configuration of Network Assuranceon the controller to be passed to a Network Assurance Server. clCSNAGlobalConfigGroupRev1 object is superseded by clCSNAGlobalConfigGroupRev2.
1.3.6.1.4.1.9.9.838.2.2.11deprecated
clCSNAGlobalConfigGroupRev2
OBJECT-GROUP
This collection of objects represent the configuration of network assurance on the controller to be passed to a network assurance server.
1.3.6.1.4.1.9.9.838.2.2.12current
clCSWebhookConfigGroup
OBJECT-GROUP
This collection of objects represent the configuration of a webhook server to receive telemetry data from the controller clCSWebhookConfigGroup object is superseded by clCSWebhookConfigGroupRev1.
1.3.6.1.4.1.9.9.838.2.2.13deprecated
clCSWebhookConfigGroupRev1
OBJECT-GROUP
This collection of objects represent the configuration of a webhook server to receive telemetry data from the controller
1.3.6.1.4.1.9.9.838.2.2.14current
clCSCMXConfigGroupRev1
OBJECT-GROUP
This collection of objects represent the configuration for Connected Mobility Experience (CMX) on the controller to be passed to an LWAPP AP.
1.3.6.1.4.1.9.9.838.2.2.15current
clCSTelemetryConfigGroup
OBJECT-GROUP
This collection of objects represent the configuration of telemetry filter channels.
1.3.6.1.4.1.9.9.838.2.2.16current