CISCO-LAG-MIB
- Registered at
- 1.3.6.1.4.1.9.9.225
- Last updated
- 2014-01-14 00:00
- Organization
- Cisco Systems, Inc.
- Revisions
- 2014-01-14 00:00, 2010-10-20 00:00, 2009-11-19 00:00, 2008-01-08 00:00, 2006-06-21 00:00, 2004-06-11 00:00, 2002-12-13 00:00, 2002-01-02 00:00, 2001-10-23 00:00
- Namespace
- cisco
- Source file
CISCO-LAG-MIB- Digest
sha256:c8dba380fc96d403d4e2d74b8504b4fc793a8f3604a37332dded4b77aabd3a86
Description
Cisco Link Aggregation module for managing IEEE Std 802.3ad. This MIB provides Link Aggregation information that are either excluded by IEEE Std 802.3ad (IEEE8023-LAG-MIB) or specific to Cisco products.
Contact
Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-etherchan@cisco.com cs-lan-switch-snmp@cisco.com
Imports
| From | Symbols |
|---|---|
| CISCO-SMI | ciscoMgmt |
| CISCO-TC | CiscoInterfaceIndexList |
| IEEE8023-LAG-MIB | dot3adAggPortEntry, dot3adAggPortListEntry |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
BRIDGE-MIB CISCO-LAG-MIB CISCO-SMI CISCO-TC IANAifType-MIB IEEE8023-LAG-MIB IF-MIB P-BRIDGE-MIB Q-BRIDGE-MIB RFC1158-MIB RFC1271-MIB RMON-MIB RMON2-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC TOKEN-RING-RMON-MIB
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ClagAggregationProtocol TEXTUAL-CONVENTION An enumerated type for all the supported aggregation protocols. lacp(1) Link Aggregation Control Protocol(LACP), IEEE 802.3ad pagp(2) Port Aggregation Protocol | current | |||
| ClagDistributionAddressMode TEXTUAL-CONVENTION An enumerated type for all the supported load balancing address modes to distribute traffic across multiple links. The address mode can be source, destination, or both used on this port channel interface to distribute outgoing data frames among its component interfaces. source(1) Source address. destination(2) Destination address. both(3) both, Source and Destination. | current | |||
| ClagDistributionMplsProtocol TEXTUAL-CONVENTION An enumerated type for all the supported load balancing algorithms used on the port channel interface to distribute outgoing MPLS (Multi-Protocol Label Switching) data frames among its component interfaces, such as MPLS label. label(1) MPLS label labelIp(2) MPLS label or IP address | current | |||
| ClagDistributionProtocol TEXTUAL-CONVENTION An enumerated type for all the supported load balancing algorithms used on the port channel interface to distribute outgoing data frames among its component interaces, such as IP address. ip(1) IP address mac(2) MAC address port(3) port number vlanIpPort(4) vlan number, IP address and port number vlanIp(5) VLAN number and IP address ipPort(6) IP address and port number | current | |||
| ClagPortAdminStatus TEXTUAL-CONVENTION An enumerated type for all the LACP administrative states on a particular aggregation port. off(1) No LACP involved on the aggregation port. on(2) The aggregation port always join link aggregation whithout any LACP protocol involved. active(3) Active LACP indicates the port's preference to participate in the protocol regardless of Partner's control value. passive(4) Passive indicates the port's preference for not transmitting LACP PDU unless its Partner's control value is Active LACP. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| clagMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.225.1 | |||
| clagGlobalConfigObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.225.1.1 | |||
| clagAggDistributionProtocol OBJECT-TYPE This object controls the load balancing algorithms used on this port channel interface to distribute outgoing data frames among its component interfaces. | 1.3.6.1.4.1.9.9.225.1.1.1 | ClagDistributionProtocol | read-write | current |
| clagAggDistributionAddressMode OBJECT-TYPE The load balancing address mode for the device. | 1.3.6.1.4.1.9.9.225.1.1.2 | ClagDistributionAddressMode | read-write | current |
| clagAggDistributionMplsProtocol OBJECT-TYPE This object controls the load balancing algorithms used on this port channel interface to distribute outgoing MPLS data frames among its component interfaces. This object is only instantiated on platforms which support aggregation load balancing for MPLS packets. | 1.3.6.1.4.1.9.9.225.1.1.3 | ClagDistributionMplsProtocol | read-write | current |
| clagAggMaxAggregators OBJECT-TYPE This object indicates the maximum number of aggregators supported by the device. | 1.3.6.1.4.1.9.9.225.1.1.4 | Unsigned32 | read-only | current |
| clagAggHashDistMethodGlobalConfig OBJECT-TYPE Specifies the global configuration for hash distribution method applied on a port channel interface among its channel members. adaptive(1) : Adaptive hash distribution for the bundle among port channel members. fixed(2) : Fixed hash distribution for the bundle among port channel members. | 1.3.6.1.4.1.9.9.225.1.1.5 | INTEGER {adaptive(1), fixed(2)} | read-write | current |
| clagAgg OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.225.1.2 | |||
| clagAggProtocolTable OBJECT-TYPE A table that contains protocol information about every interface which supports link aggregation. | 1.3.6.1.4.1.9.9.225.1.2.1 | not-accessible | current | |
| clagAggProtocolEntry OBJECT-TYPE Entry containing aggregation protocol type for a particular interface. An entry is created in this table when its associated ifEntry is created and that interface supports link aggregation. The entry of this table is deleted when the associated ifEntry is removed. | 1.3.6.1.4.1.9.9.225.1.2.1.1 | not-accessible | current | |
| clagAggProtocolType OBJECT-TYPE The aggregation protocol type for the interface. On some platforms, aggregation protocol may be assigned per group. The group can be a collection of the ports which belong to a module or system. If the aggregation protocol is assigned to any of the ports in such group then the aggregation protocol will apply to all ports in the same group. On some platforms, aggregation protocol type can be assigned per aggregator. If multiple ports belong to a aggregator, the aggregation protocol assigned to any of the ports in such aggregator will apply to all ports in the same. | 1.3.6.1.4.1.9.9.225.1.2.1.1.1 | ClagAggregationProtocol | read-write | current |
| clagAggPort OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.225.1.3 | |||
| clagAggPortTable OBJECT-TYPE A table that contains information about every aggregation port that is associated with this system. This table contains additional objects for the dot3adAggPortTable. | 1.3.6.1.4.1.9.9.225.1.3.1 | not-accessible | current | |
| clagAggPortEntry OBJECT-TYPE An entry containing additional management information applicable to a particular aggregation port. | 1.3.6.1.4.1.9.9.225.1.3.1.1 | not-accessible | current | |
| clagAggPortAdminStatus OBJECT-TYPE The administrative status of the LACP protocol on this aggregation port. | 1.3.6.1.4.1.9.9.225.1.3.1.1.1 | ClagPortAdminStatus | read-write | current |
| clagAggPortRate OBJECT-TYPE Specifies the requested exchange rate of LACP packets on this interface. fast(1) : The device requests its peers to send LACP packets at fast rate to this interface. normal(2): The decice requests its peers to send LACP packets at normal rate to this interface. | 1.3.6.1.4.1.9.9.225.1.3.1.1.2 | INTEGER {fast(1), normal(2)} | read-write | current |
| clagAggPortList OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.225.1.4 | |||
| clagAggPortListTable OBJECT-TYPE This table augments the dot3adAggPortListTable and provides the complete list of ports associated with each Aggregator. | 1.3.6.1.4.1.9.9.225.1.4.1 | not-accessible | current | |
| clagAggPortListEntry OBJECT-TYPE A list of the ports associated with a given Aggregator. | 1.3.6.1.4.1.9.9.225.1.4.1.1 | not-accessible | current | |
| clagAggPortListPorts OBJECT-TYPE This object contains a list of ports currently associated with this Aggregator in the format of '[number_of_ports][cieIfDot1dBaseMappingPort1][...] [cieIfDot1dBaseMappingPortn]' where [number_of_ports] is of size 2 octet and indicates the number of ports contains in this object. It also indicates the number of cieIfDot1dBaseMappingPort field following this field. [cieIfDot1dBaseMappingPort'n'] is the value of cieIfDot1dBaseMappingPort of the 'n' port associated with this Aggregation and has size of 2 octets where n is up to [number_of_ports]. | 1.3.6.1.4.1.9.9.225.1.4.1.1.1 | OCTET STRING (SIZE(2..256)) | read-only | current |
| clagAggPortListInterfaceIndexList OBJECT-TYPE This object contains a list of ports currently associated with this Aggregator in the format of CiscoInterfaceIndexList. | 1.3.6.1.4.1.9.9.225.1.4.1.1.2 | CiscoInterfaceIndexList | read-only | current |
| clagAggChannelIntf OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.225.1.5 | |||
| clagAggChannelIfTable OBJECT-TYPE A table providing port channel configuration information for port channel interfaces identified by ifIndex. | 1.3.6.1.4.1.9.9.225.1.5.1 | not-accessible | current | |
| clagAggChannelIfEntry OBJECT-TYPE An entry containing port channel configuration information for port channel interfaces. | 1.3.6.1.4.1.9.9.225.1.5.1.1 | not-accessible | current | |
| clagAggChannelIfFastSwitchOver OBJECT-TYPE Specifies whether LACP protocol fast switchover mode is enabled on this port channel interface or not. | 1.3.6.1.4.1.9.9.225.1.5.1.1.1 | TruthValue | read-write | current |
| clagAggChannelIfMaxBundle OBJECT-TYPE Specifies the maximum number of member ports that can be bundled on this port channel interface for LACP protocol. | 1.3.6.1.4.1.9.9.225.1.5.1.1.2 | Unsigned32 (1..4294967295) | read-write | current |
| clagAggChannelIfMinLink OBJECT-TYPE Specifies the minimum number of bundled member ports that are needed in order for this port channel interface to be operational. A value of zero for this object indicates that no minimum number of bundled member ports are required for this port channel interface to be operational. | 1.3.6.1.4.1.9.9.225.1.5.1.1.3 | Unsigned32 | read-write | current |
| clagAggChannelIfHashDistAdminMethod OBJECT-TYPE Specifies the hash distribution method that is administratively configured on this port channel interface upon its channel membership transition event. none(1) : Hash distribution algorithm on this port channel interface is not specifically configured and global configuration of clagAggHashDistMethodGlobalConfig will be applied on this port channel interface. adaptive(2) : Adaptive hash distribution for this port channel interface among its channel members. fixed(3) : Fixed hash distribution for this port channel interface among its channel members. | 1.3.6.1.4.1.9.9.225.1.5.1.1.4 | INTEGER {none(1), adaptive(2), fixed(3)} | read-write | current |
| clagAggChannelIfHashDistOperMethod OBJECT-TYPE Specifies the operational hash distribution method for this port channel interface among the port channel members. other(1) : None of the following. adaptive(2) : Adaptive hash distribution for the port channel interface among its channel members. fixed(3) : Fixed hash distribution for the port channel among channel members. | 1.3.6.1.4.1.9.9.225.1.5.1.1.5 | INTEGER {other(1), adaptive(2), fixed(3)} | read-only | current |
| clagMIBNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.225.2 | |||
| clagMIBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.225.3 | |||
| clagMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.225.3.1 | |||
| clagMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.225.3.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| clagMIBCompliance MODULE-COMPLIANCE The compliance statement for entities which implement the Cisco Link Aggregation MIB | 1.3.6.1.4.1.9.9.225.3.1.1 | deprecated |
| clagMIBCompliance2 MODULE-COMPLIANCE The compliance statement for entities which implement the Cisco Link Aggregation MIB | 1.3.6.1.4.1.9.9.225.3.1.2 | deprecated |
| clagMIBCompliance3 MODULE-COMPLIANCE The compliance statement for entities which implement the Cisco Link Aggregation MIB | 1.3.6.1.4.1.9.9.225.3.1.3 | deprecated |
| clagMIBCompliance4 MODULE-COMPLIANCE The compliance statement for entities which implement the Cisco Link Aggregation MIB | 1.3.6.1.4.1.9.9.225.3.1.4 | deprecated |
| clagMIBCompliance5 MODULE-COMPLIANCE The compliance statement for entities which implement the Cisco Link Aggregation MIB | 1.3.6.1.4.1.9.9.225.3.1.5 | deprecated |
| clagMIBCompliance6 MODULE-COMPLIANCE The compliance statement for entities which implement the Cisco Link Aggregation MIB | 1.3.6.1.4.1.9.9.225.3.1.6 | current |
| clagAggProtocolGroup OBJECT-GROUP The object that provide aggregation protocol type of an interface. These are additional to the IEEE Std 802.3ad MIB. | 1.3.6.1.4.1.9.9.225.3.2.1 | current |
| clagAggPortGroup OBJECT-GROUP A collection of objects that provide admin status about an aggregation port. These are additional to the IEEE Std 802.3ad MIB. | 1.3.6.1.4.1.9.9.225.3.2.2 | current |
| clagAggDistributionGroup OBJECT-GROUP A collection of objects that provide the load balancing information for an aggregator. These are additional to the IEEE Std 802.3ad MIB. | 1.3.6.1.4.1.9.9.225.3.2.3 | current |
| clagAggDistributionMplsGroup OBJECT-GROUP A collection of objects that provide the load balancing information for an aggregator for MPLS packets. These are additional to the IEEE Std 802.3ad MIB. | 1.3.6.1.4.1.9.9.225.3.2.4 | current |
| clagAggPortListGroup OBJECT-GROUP A collection of object that provides information about ports in an aggregation. | 1.3.6.1.4.1.9.9.225.3.2.5 | current |
| clagAggMaxAggregatorsGroup OBJECT-GROUP A collection of object that provides information about the maximum number of aggregators supported by the device. | 1.3.6.1.4.1.9.9.225.3.2.6 | current |
| clagAggRateGroup OBJECT-GROUP A collection of object that provides information about the rate at which LACP packets are ingressed on interfaces. | 1.3.6.1.4.1.9.9.225.3.2.7 | current |
| clagAggChannelIfLacpGroup OBJECT-GROUP A collection of objects that provides information about the LACP protocol configurations for port channel interfaces. | 1.3.6.1.4.1.9.9.225.3.2.8 | current |
| clagAggChannelIfHashDistMethodGroup OBJECT-GROUP A collection of objects that provides information about the port channel configurations of hash distribution method on port channel interfaces. | 1.3.6.1.4.1.9.9.225.3.2.9 | current |
| clagAggHashDistGlobalGroup OBJECT-GROUP A collection of object that provides information about global configuration of hash distribution method on port channel interface. | 1.3.6.1.4.1.9.9.225.3.2.10 | current |
| clagAggChannelIfMinLinkGroup OBJECT-GROUP A collection of objects that provides information about the minimum link configurations for port channel interfaces. | 1.3.6.1.4.1.9.9.225.3.2.11 | current |
| clagAggPortListInterfaceIndexGroup OBJECT-GROUP A collection of objects that provides information about ports in an aggregation in the format of CiscoInterfaceIndexList. | 1.3.6.1.4.1.9.9.225.3.2.12 | current |