CISCO-L2NAT-MIB
- Registered at
- 1.3.6.1.4.1.9.9.806
- Last updated
- 2013-04-16 00:00
- Organization
- Cisco Systems, Inc.
- Revisions
- 2013-04-16 00:00
- Namespace
- cisco
- Source file
CISCO-L2NAT-MIB- Digest
sha256:4328c6eb9e590656cbeff904f33656cc57cc99519cc9a581dbcf8c88e7d065f2
Description
Network Address Translation (NAT) involves translating the source and or destination IP addresses of packets as they traverse from one IP domain to another. NAT is usually performed on packets that are routed, and there is a MIB already defined for that, but the application addressed here is for performing NAT for Layer 2 switched packets. This MIB module defines objects and tables for Network Address Translation (NAT) performed at layer 2. This application is planned currently for Industrial Ethernet switches, but this could be used for other applications. This platform implements NAT using an FPGA which connects to uplinks, so NAT is only applicable for packets coming in from uplinks, and going out of uplinks. There are 3 main logical modules that are referred in this MIB. Global parameters : These provide statistics for the entire platform. L2NAT Instance Table : This table contains multiple Layer 2 NAT instances. A Layer 2 NAT instance referred throughout this MIB is an entity that is defined with respect to the Layer 2 NAT feature, and is different from the concept of instance as used in SNMP. Each Layer 2 NAT instance has a unique number. Each Layer 2 NAT instance consists of packets that are to be permitted or denied, as well as packets that are supposed to be fixed up. Fixup is a NAT concept which applies to certain applications which embed IP addresses in the payload. For these applications to work across NAT, the embedded IP addresses need to be translated along with the header IP addresses. Each Layer 2 NAT instance also contains a list of source and/or destination IP address translations An instance only becomes effective on traffic after being applied to an interface vlan combination. This table actually consists of these 2 MIB tables in order for indexing to work, cl2natInstanceTable and cl2natInstanceIpTable L2NAT Interface Config Table : This table contains multiple entries, where each entry contains configuration for the instance applied to an interface vlan combination. This table actually consists of these 2 MIB tables in order for indexing to work cl2natInterfaceConfigTable and cl2natInterfaceIpConfigTable. L2NAT Interface Statistics Table : This table contains multiple entries, where each entry contains stats for the instance applied to an interface vlan combination. This table actually consists of these 2 MIB tables in order for indexing to work , cl2natInterfaceStatisticsTable and cl2natInterfaceIpStatisticsTable.
Contact
Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-snmp@cisco.com
Imports
| From | Symbols |
|---|---|
| CISCO-SMI | ciscoMgmt |
| CISCO-TC | CiscoInetAddressMask |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Counter64, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, RowStatus, StorageType, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCO-L2NAT-MIB CISCO-SMI CISCO-TC INET-ADDRESS-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ciscoL2natMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.806.1 | |||
| cl2natTotalInstances OBJECT-TYPE This object indicates the total number of Instances defined by the user on this device. Each instance is an independent module of configuration including IP address translations that only becomes active after being applied to an interface/vlan combination. | 1.3.6.1.4.1.9.9.806.1.1 | Counter32 | read-only | current |
| cl2natTotalMatched OBJECT-TYPE This object indicates the number of times a packet matches with user configured IP translation entries. It should be noted that the same packet can be counted twice if it matches both the outside and inside entries, one for the source address translation, and the other for the destination address translation. | 1.3.6.1.4.1.9.9.806.1.2 | Counter64 | read-only | current |
| cl2natTotalUnmatched OBJECT-TYPE This object indicates the total number of packets that did not match any of the configured NAT entries. | 1.3.6.1.4.1.9.9.806.1.3 | Counter64 | read-only | current |
| cl2natTotalFixups OBJECT-TYPE This object indicates the total number of packets that required fixups. | 1.3.6.1.4.1.9.9.806.1.4 | Counter64 | read-only | current |
| cl2natTotalTranslationEntryConfigured OBJECT-TYPE This object specifies the total number IP translation entries currently configured in the system. | 1.3.6.1.4.1.9.9.806.1.5 | Unsigned32 | read-only | current |
| cl2natTotalPacketTranslated OBJECT-TYPE This object indicates the total number of packets that got translated per rules defined in the cl2natinstanceIpTable | 1.3.6.1.4.1.9.9.806.1.6 | Counter64 | read-only | current |
| cl2natInstConfigInstanceTable OBJECT-TYPE This table contains multiple Layer 2 NAT instances. Each Layer 2 NAT instance has a unique name and consists of configurations other than the list of IP NAT translations for which there is a separate table. An instance only becomes effective on traffic after being applied to an interface/vlan combination, which is done through the cl2natInterfaceConfigTable. | 1.3.6.1.4.1.9.9.806.1.7 | not-accessible | current | |
| cl2natInstConfigInstanceEntry OBJECT-TYPE This entry is created as a row in the cl2natInstConfigInstanceTable table when a user configures a new instance. Each entry consists of the configuration parameters described below, and is indexed by the Layer 2 NAT instance name. | 1.3.6.1.4.1.9.9.806.1.7.1 | not-accessible | current | |
| cl2natInstConfigInstanceName OBJECT-TYPE This object specifies the Name assigned by user to a created Layer 2 NAT instance. | 1.3.6.1.4.1.9.9.806.1.7.1.1 | SnmpAdminString (SIZE(1..64)) | not-accessible | current |
| cl2natInstConfigPermitIn OBJECT-TYPE This object specifies user configured options for permitting or denying packets coming in from uplinks that do not match any NAT entry (unmatched), IGMP packets, multicast packets. A bit value of 0 denotes drop and a value of 1 indicates permit for that type. Default is 'drop' for all 3 types. | 1.3.6.1.4.1.9.9.806.1.7.1.2 | Bits {unmatched(0), igmp(1), multicast(2)} | read-create | current |
| cl2natInstConfigPermitOut OBJECT-TYPE This object specifies user configured options for permitting or denying packets going out of uplinks that do not match any NAT entry (unmatched), IGMP packets, multicast packets. A bit value of 0 denotes drop and a value of 1 indicates permit for that type. Default is drop for all 3 types. | 1.3.6.1.4.1.9.9.806.1.7.1.3 | Bits {unmatched(0), igmp(1), multicast(2)} | read-create | current |
| cl2natInstConfigFixup OBJECT-TYPE This object specifies user configured options for fixing up ARP, ICMP, Profinet, CIP and SNMP protocols. A fixup is required for protocols which embed IP addresses to work across NAT boundaries, and involves translating any IP address embedded in the protocol payload to the corresponding configured translated address. A bit value of 1 denotes fixup is enabled for that protocol, and a value of 0 indicates fixup is disabled. By default, fixup is enabled for ARP, ICMP, Profinet and CIP (if required). | 1.3.6.1.4.1.9.9.806.1.7.1.4 | Bits {arp(0), icmp(1), profinet(2), cip(3), snmp(4)} | read-create | current |
| cl2natInstConfigStorageType OBJECT-TYPE This object specifies the storage type for this conceptual row. The following columnar objects are allowed to be writable when the storageType of this conceptual row is permanent(4): (replace with list of columns) | 1.3.6.1.4.1.9.9.806.1.7.1.5 | StorageType | read-only | current |
| cl2natInstConfigInstanceRowStatus OBJECT-TYPE This object will follow RowStatus Textual convention to create/destroy entries. The following columnar objects are mandatory to make the entry 'active': cl2natInstIpInstanceName Once the entry status has been set to active(1), the entry cannot be modified. The only operation possible after this is to delete the entry. | 1.3.6.1.4.1.9.9.806.1.7.1.6 | RowStatus | read-create | current |
| cl2natInstIpInstanceIpTable OBJECT-TYPE This table consists of multiple IP entries for each Layer2 NAT instances. This table is a logical extension of the cl2natInstInstanceTable because it is linked to the same Layer 2 NAT instance. This table is required because there can be multiple address translation entries for the same Layer 2 NAT instance. | 1.3.6.1.4.1.9.9.806.1.8 | not-accessible | current | |
| cl2natInstIpInstanceIpEntry OBJECT-TYPE This Entry is created when a new IP translation entry is added for a particular instance. | 1.3.6.1.4.1.9.9.806.1.8.1 | not-accessible | current | |
| cl2natInstIpDirection OBJECT-TYPE This object specifies the direction in which an address is to be translated. A value of 1 denotes that this entry is for translating source IP address of packets going out of uplinks, or destination IP address of packets coming in. A value of 2 denotes that this entry is for translating destination IP address of packets going out of uplinks, or source IP address of packets coming in. | 1.3.6.1.4.1.9.9.806.1.8.1.1 | INTEGER {inside(1), outside(2)} | not-accessible | current |
| cl2natInstIpAddressType OBJECT-TYPE This object specifies the type of address that is used to configure this translation. 'host' implies that this is a single IP address translation for one host. 'range' implies that the cl2natFromAddress and cl2natToAddress are the starting addresses of the range, and the cl2natIpRange is the number of addresses that are translated with this single config. 'network' implies that an entire class C network of original IP addresses is translated to the corresponding 254 address starting from the cl2natToAddress. | 1.3.6.1.4.1.9.9.806.1.8.1.2 | INTEGER {host(1), range(2), network(3)} | not-accessible | current |
| cl2natInstIpFromIpAddressType OBJECT-TYPE The address type of cl2natFromIpAddress. This object specifies whether this translation is for for IPv4 or IPv6. | 1.3.6.1.4.1.9.9.806.1.8.1.3 | InetAddressType | not-accessible | current |
| cl2natInstIpFromIpAddress OBJECT-TYPE This object indicates the source IP address of packets going out of the uplink before translation if the cl2natInstIpDirection value for this entry is inside(1). This objects indicate the destination IP address of packets coming in from the uplinks after translation if the cl2natInstIpDirection value for this entry is outside(2) | 1.3.6.1.4.1.9.9.806.1.8.1.4 | InetAddress (SIZE(4 | 16)) | not-accessible | current |
| cl2natInstIpToIpAddressType OBJECT-TYPE The address type of cl2natInstIpToIpAddress. This object specifies whether this translation is for for IPv4 or IPv6. | 1.3.6.1.4.1.9.9.806.1.8.1.5 | InetAddressType | read-create | current |
| cl2natInstIpToIpAddress OBJECT-TYPE This object indicates the Source IP address of packets going out of the uplink after translation, and destination IP address of packets coming in from the uplinks before translation if the cl2natInstIpDirection value for this entry is inside(1), or the Destination IP address of packets going out of the uplink after translation, and source IP address of packets coming in from the uplinks before translation if the cl2natInstIpDirection value for this entry is outside(2). | 1.3.6.1.4.1.9.9.806.1.8.1.6 | InetAddress (SIZE(4 | 16)) | read-create | current |
| cl2natInstIpAddressMask OBJECT-TYPE This object specifies the subnet address mask when the value of cl2natInstIpAddressType is 'network'. This is not used for any other option. | 1.3.6.1.4.1.9.9.806.1.8.1.7 | CiscoInetAddressMask | read-create | current |
| cl2natInstIpRange OBJECT-TYPE This object specifies the number of addresses to be translated in case the value of cl2natIpAddressType is 'range'. This is not used for any other option. | 1.3.6.1.4.1.9.9.806.1.8.1.8 | Integer32 (1..128) | read-create | current |
| cl2natInstStorageIpStorageType OBJECT-TYPE This object specifies the storage type for this conceptual row. The following columnar objects are allowed to be writable when the storageType of this conceptual row is permanent(4): (replace with list of columns) | 1.3.6.1.4.1.9.9.806.1.8.1.9 | StorageType | read-only | current |
| cl2natInstIpRowStatus OBJECT-TYPE This object will follow RowStatus Textual convention to create/destroy entries. The following columnar objects are mandatory to make the entry 'active': cl2natInstIpDirection cl2natInstIpFromIpAddress cl2natInstIpToIpAddress Once the entry status has been set to active(1), the entry cannot be modified. The only operation possible after this is to delete the entry. | 1.3.6.1.4.1.9.9.806.1.8.1.10 | RowStatus | read-create | current |
| cl2natInterfaceConfigTable OBJECT-TYPE This table contains multiple entries, where each entry contains configuration of the instance applied to an interface/vlan combination. | 1.3.6.1.4.1.9.9.806.1.9 | not-accessible | current | |
| cl2natInterfaceConfigEntry OBJECT-TYPE Each Entry is created as a row in the cl2natInterfaceConfigTable table when a user applies an instance to an interface/vlan combination, and removed when that instance is removed. A value of 0 in cl2natInterfaceVlanIndex indicates that this attachment is for untagged traffic. The result of this lookup is actually an index that is used to lookup the cl2natInstanceTable which gives the actual config of the instance attached. | 1.3.6.1.4.1.9.9.806.1.9.1 | not-accessible | current | |
| cl2natInterfaceConfigIfIndex OBJECT-TYPE The index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex. | 1.3.6.1.4.1.9.9.806.1.9.1.1 | Unsigned32 | not-accessible | current |
| cl2natInterfaceConfigVlanIndex OBJECT-TYPE This object indicates the vlan ID the L2NAT instance is attached to. A value of 0 indicates the instance is attached to untagged traffic of the interface. | 1.3.6.1.4.1.9.9.806.1.9.1.2 | Unsigned32 | not-accessible | current |
| cl2natInterfaceConfigInstanceName OBJECT-TYPE This object indicates the Layer 2 NAT Instance Name to be looked up to retrieve its configuration details. This name corresponds to what's in cl2natInstConfigInstanceName | 1.3.6.1.4.1.9.9.806.1.9.1.3 | SnmpAdminString (SIZE(1..64)) | read-only | current |
| cl2natInterfaceConfigStorageType OBJECT-TYPE This object specifies the storage type for this conceptual row. The following columnar objects are allowed to be writable when the storageType of this conceptual row is permanent(4): (replace with list of columns) | 1.3.6.1.4.1.9.9.806.1.9.1.4 | StorageType | read-only | current |
| cl2natInterfaceConfigRowStatus OBJECT-TYPE This object will follow RowStatus Textual convention to create/destroy entries. The following columnar objects are mandatory to make the entry 'active': ifIndex Once the entry status has been set to active(1), the entry cannot be modified. The only operation possible after this is to delete the entry. | 1.3.6.1.4.1.9.9.806.1.9.1.5 | RowStatus | read-create | current |
| cl2natInterfaceStatisticsTable OBJECT-TYPE This table contains the Layer 2 NAT instance level statistics. The IP address translation statistics are contained in the cl2natInterfaceIpStatisticsTable. | 1.3.6.1.4.1.9.9.806.1.10 | not-accessible | current | |
| cl2natInterfaceStatisticsEntry OBJECT-TYPE This Entry is created as a row in the cl2natInterfaceStatisticsTable table when a user applies an instance to an interface/vlan combination, and removed when that instance is removed. | 1.3.6.1.4.1.9.9.806.1.10.1 | not-accessible | current | |
| cl2natFixupArpIn OBJECT-TYPE This object indicates the Number of fixed up ARP packets for this Layer 2 NAT Instance coming into the uplinks. | 1.3.6.1.4.1.9.9.806.1.10.1.1 | Counter64 | read-only | current |
| cl2natFixupIcmpIn OBJECT-TYPE This object indicates the Number of fixed up ICMP packets for this Layer 2 NAT Instance coming into the uplinks. | 1.3.6.1.4.1.9.9.806.1.10.1.2 | Counter64 | read-only | current |
| cl2natFixupCipIn OBJECT-TYPE This object indicates the Number of fixed up CIP packets for this Layer 2 NAT Instance coming into the uplinks. | 1.3.6.1.4.1.9.9.806.1.10.1.3 | Counter64 | read-only | current |
| cl2natFixupProfinetIn OBJECT-TYPE This object indicates the Number of fixed up Profinet packets for this Layer 2 NAT Instance coming into the uplinks. | 1.3.6.1.4.1.9.9.806.1.10.1.4 | Counter64 | read-only | current |
| cl2natFixupFtpIn OBJECT-TYPE This object indicates the Number of fixed up FTP packets for this Layer 2 NAT Instance coming into the uplinksk. | 1.3.6.1.4.1.9.9.806.1.10.1.5 | Counter64 | read-only | current |
| cl2natFixupSnmpIn OBJECT-TYPE This object indicates the Number of fixed up SNMP packets for this Layer 2 NAT Instance coming into the uplinks. | 1.3.6.1.4.1.9.9.806.1.10.1.6 | Counter64 | read-only | current |
| cl2natFixupSipIn OBJECT-TYPE This object indicates the Number of fixed up Sip packets for this Layer 2 NAT Instance coming into the uplinks. | 1.3.6.1.4.1.9.9.806.1.10.1.7 | Counter64 | read-only | current |
| cl2natFixupSccpIn OBJECT-TYPE This object indicates the Number of fixed up Sccp packets for this Layer 2 NAT Instance coming into the uplinks. | 1.3.6.1.4.1.9.9.806.1.10.1.8 | Counter64 | read-only | current |
| cl2natUnmatchedIn OBJECT-TYPE This object indicates the Number of unmatched packets for this Layer 2 NAT Instance coming into the uplinks. 'Unmatched' packets are those that do not match any IP address translation configured for this layer 2 NAT instance. | 1.3.6.1.4.1.9.9.806.1.10.1.9 | Counter64 | read-only | current |
| cl2natTranslatedUnicastIn OBJECT-TYPE This object indicates the Number of translated unicast packets for this Layer 2 NAT coming into the uplinks. | 1.3.6.1.4.1.9.9.806.1.10.1.10 | Counter64 | read-only | current |
| cl2natDroppedUnicastIn OBJECT-TYPE This object indicates the Number of Dropped unicast packets for this Layer 2 NAT instance coming into the uplinks. | 1.3.6.1.4.1.9.9.806.1.10.1.11 | Counter64 | read-only | current |
| cl2natDroppedMulticastIn OBJECT-TYPE This object indicates the Number of dropped multicast packets for this Layer 2 NAT coming into the uplinks. | 1.3.6.1.4.1.9.9.806.1.10.1.12 | Counter64 | read-only | current |
| cl2natPassThruUnicastIn OBJECT-TYPE This object indicates the Number of passed through unicast packets for this Layer 2 NAT coming into the uplinks. | 1.3.6.1.4.1.9.9.806.1.10.1.13 | Counter64 | read-only | current |
| cl2natPassThruMulticastIn OBJECT-TYPE This object indicates the Number of passed through multicast packets for this Layer 2 NAT coming into the uplinks. | 1.3.6.1.4.1.9.9.806.1.10.1.14 | Counter64 | read-only | current |
| cl2natPassThruIgmpIn OBJECT-TYPE This object indicates the Number of passed through IGMP packets for this Layer 2 NAT coming into the uplinks. | 1.3.6.1.4.1.9.9.806.1.10.1.15 | Counter64 | read-only | current |
| cl2natDroppedIgmpIn OBJECT-TYPE This object indicates the Number of dropped IGMP packets for this Layer 2 NAT coming into the uplinks. | 1.3.6.1.4.1.9.9.806.1.10.1.16 | Counter64 | read-only | current |
| cl2natFixupArpOut OBJECT-TYPE This object indicates the Number of fixed up ARP packets for this Layer 2 NAT Instance going out of the uplinks. | 1.3.6.1.4.1.9.9.806.1.10.1.17 | Counter64 | read-only | current |
| cl2natFixupIcmpOut OBJECT-TYPE This object indicates the Number of fixed up ICMP packets for this Layer 2 NAT Instance going out of the uplinks. | 1.3.6.1.4.1.9.9.806.1.10.1.18 | Counter64 | read-only | current |
| cl2natFixupCipOut OBJECT-TYPE This object indicates the Number of fixed up CIP packets for this Layer 2 NAT Instance going out of the uplinks. | 1.3.6.1.4.1.9.9.806.1.10.1.19 | Counter64 | read-only | current |
| cl2natFixupProfinetOut OBJECT-TYPE This object indicates the Number of fixed up Profinet packets for this Layer 2 NAT Instance going out of the uplinks. | 1.3.6.1.4.1.9.9.806.1.10.1.20 | Counter64 | read-only | current |
| cl2natFixupFtpOut OBJECT-TYPE This object indicates the Number of fixed up FTP packets for this Layer 2 NAT Instance going out of the uplinks. | 1.3.6.1.4.1.9.9.806.1.10.1.21 | Counter64 | read-only | current |
| cl2natFixupSnmpOut OBJECT-TYPE This object indicates the Number of fixed up SNMP packets for this Layer 2 NAT Instance going out of the uplinks. | 1.3.6.1.4.1.9.9.806.1.10.1.22 | Counter64 | read-only | current |
| cl2natFixupSipOut OBJECT-TYPE This object indicates the Number of fixed up Sip packets for this Layer 2 NAT Instance going out of the uplinks. | 1.3.6.1.4.1.9.9.806.1.10.1.23 | Counter64 | read-only | current |
| cl2natFixupSccpOut OBJECT-TYPE This object indicates the Number of fixed up Sccp packets for this Layer 2 NAT Instance going out of the uplinks. | 1.3.6.1.4.1.9.9.806.1.10.1.24 | Counter64 | read-only | current |
| cl2natUnmatchedOut OBJECT-TYPE This object indicates the Number of unmatched packets for this Layer 2 NAT Instance going out of the uplinks. 'Unmatched' packets are those that do not match any IP address translation configured for this layer 2 NAT instance. | 1.3.6.1.4.1.9.9.806.1.10.1.25 | Counter64 | read-only | current |
| cl2natDroppedUnicastOut OBJECT-TYPE This object indicates the Number of Dropped unicast packets for this Layer 2 NAT instance going out of the uplinks. | 1.3.6.1.4.1.9.9.806.1.10.1.26 | Counter64 | read-only | current |
| cl2natTranslatedUnicastOut OBJECT-TYPE This object indicates the Number of translated unicast packets for this Layer 2 NAT going out of the uplinks. | 1.3.6.1.4.1.9.9.806.1.10.1.27 | Counter64 | read-only | current |
| cl2natPassThruUnicastOut OBJECT-TYPE This object indicates the Number of passed through unicast packets for this Layer 2 NAT instance going out of the uplinks. | 1.3.6.1.4.1.9.9.806.1.10.1.28 | Counter64 | read-only | current |
| cl2natDroppedMulticastOut OBJECT-TYPE This object indicates the Number of dropped multicast packets for this Layer 2 NAT instance going out of the uplinks. | 1.3.6.1.4.1.9.9.806.1.10.1.29 | Counter64 | read-only | current |
| cl2natPassThruMulticastOut OBJECT-TYPE This object indicates the Number of passed through multicast packets for this Layer 2 NAT coming out the uplinks. | 1.3.6.1.4.1.9.9.806.1.10.1.30 | Counter64 | read-only | current |
| cl2natDroppedIgmpOut OBJECT-TYPE This object indicates the Number of dropped IGMP packets for this Layer 2 NAT coming out of the uplinks. | 1.3.6.1.4.1.9.9.806.1.10.1.31 | Counter64 | read-only | current |
| cl2natPassThruIgmpOut OBJECT-TYPE This object indicates the Number of passed through IGMP packets for this Layer 2 NAT coming out of the uplinks. | 1.3.6.1.4.1.9.9.806.1.10.1.32 | Counter64 | read-only | current |
| cl2natInterfaceIpStatisticsTable OBJECT-TYPE This table contains statistics for IP translations of an L2 NAT instance that is applied to interface/vlan combination. This table is a logical extension of the cl2natInterfaceStatisticsTable, because these translations belong to the same instance referred to in that table. | 1.3.6.1.4.1.9.9.806.1.11 | not-accessible | current | |
| cl2natInterfaceIpStatisticsEntry OBJECT-TYPE This Entry is created in the cl2natInterfaceIpStatisticsTable for each IP translation of a Layer 2 NAT instance when it is attached to an interface/vlan. | 1.3.6.1.4.1.9.9.806.1.11.1 | not-accessible | current | |
| cl2natTranslatesIn OBJECT-TYPE This entry specifies the number of times this entry was matched for packets going from inside to outside of uplinks. | 1.3.6.1.4.1.9.9.806.1.11.1.1 | Counter64 | read-only | current |
| cl2natTranslatesOut OBJECT-TYPE This entry specifies the number of times this entry was matched for packets coming in from outside of uplinks to inside. | 1.3.6.1.4.1.9.9.806.1.11.1.2 | Counter64 | read-only | current |
| ciscoL2natMIBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.806.3 | |||
| ciscoL2natMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.806.3.1 | |||
| ciscoL2natMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.806.3.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| ciscoL2natMIBCompliance MODULE-COMPLIANCE cisco L2NAT mib compliance object | 1.3.6.1.4.1.9.9.806.3.1.1 | current |
| cl2natGlobalStatisticsGroup OBJECT-GROUP A collection of objects providing Global Statistics for NAT at layer 2 | 1.3.6.1.4.1.9.9.806.3.2.1 | current |
| cl2natInstanceConfigGroup OBJECT-GROUP A collection of objects providing Instance and interface Config for NAT at layer 2 | 1.3.6.1.4.1.9.9.806.3.2.2 | current |
| cl2natInstanceStatisticsGroup OBJECT-GROUP A collection of objects providing per Instance Statistics for NAT at layer 2 | 1.3.6.1.4.1.9.9.806.3.2.3 | current |
| cl2natInstanceTranslationStatisticsGroup OBJECT-GROUP A collection of objects providing per Instance per translation statistics at layer 2 | 1.3.6.1.4.1.9.9.806.3.2.4 | current |