CISCO-L2L3-INTERFACE-CONFIG-MIB
- Registered at
- 1.3.6.1.4.1.9.9.151
- Last updated
- 2000-05-10 19:00
- Organization
- Cisco Systems, Inc.
- Revisions
- 2000-05-10 19:00
- Namespace
- cisco
- Source file
CISCO-L2L3-INTERFACE-CONFIG-MIB- Digest
sha256:751cb92bc6a88b08188c164e0a96aec7ed8eabec4459fa48aa6f4bb1c8b1af8d
Description
Interface switchport mode configuration management MIB. This MIB is used to monitor and control configuration of interface switchport and routed mode.
Contact
Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-snmp@cisco.com
Imports
| From | Symbols |
|---|---|
| CISCO-SMI | ciscoMgmt |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCO-L2L3-INTERFACE-CONFIG-MIB CISCO-SMI IANAifType-MIB IF-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| CL2L3InterfaceMode TEXTUAL-CONVENTION The operational mode of the interface. For administrative and operational states, valid values are: routed(1), switchport(2). routed(1): Routed mode interfaces direct traffic using layer 3 protocols. switchport(2): Switchport-mode interfaces direct traffic using layer 2 protocols. A switchport-mode interface can be in access mode, or trunk mode, or multi-mode. Switchport interface operating mode can be configured manually, or negotiated by Dynamic Trunking Protocol (DTP) or Dynamic Inter-Switch Link (DISL). Access-mode interfaces carry one VLAN's traffic. Access-mode interface parameters are configured in CISCO-VLAN-MEMBERSHIP-MIB. Trunk-mode interfaces carry one or more VLANs. VLAN-related trunk-mode interface parameters are configured in CISCO-VTP-MIB. Multi-mode interfaces carry one VLAN to each alias of a single connected end-station. VLAN-related multi-mode interface parameters are configured in CISCO-VTP-MIB. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ciscoL2L3IfConfigMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.151.1 | |||
| cL2L3IfConfig OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.151.1.1 | |||
| cL2L3IfTable OBJECT-TYPE The table shows the administratively requested and actual operating configuration for switchport interfaces. | 1.3.6.1.4.1.9.9.151.1.1.1 | not-accessible | current | |
| cL2L3IfEntry OBJECT-TYPE An entry represents the configuration and operation of a switchport interface. Entries are created and deleted automatically in tandem with the corresponding ifEntries. | 1.3.6.1.4.1.9.9.151.1.1.1.1 | not-accessible | current | |
| cL2L3IfModeAdmin OBJECT-TYPE The administratively desired interface mode. | 1.3.6.1.4.1.9.9.151.1.1.1.1.1 | CL2L3InterfaceMode | read-write | current |
| cL2L3IfModeOper OBJECT-TYPE The operational interface mode. | 1.3.6.1.4.1.9.9.151.1.1.1.1.2 | CL2L3InterfaceMode | read-only | current |
| ciscoL2L3IfConfigMIBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.151.3 | |||
| ciscoL2L3IfConfigMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.151.3.1 | |||
| ciscoL2L3IfConfigMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.151.3.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| ciscoL2L3IfConfigMIBCompliance MODULE-COMPLIANCE The compliance statement for entities which implement the Cisco L2L3 Interface Configuration Management MIB | 1.3.6.1.4.1.9.9.151.3.1.1 | current |
| ciscoL2L3IfConfigMIBGroup OBJECT-GROUP Interface L2 & L3 mode objects | 1.3.6.1.4.1.9.9.151.3.2.1 | current |